Kambrook KFA423 User Manual

Kambrook - Australia

Building 2, Port Air Industrial Estate
1A Hale Street
Botany NSW 2019
Australia
Customer Service Line 1300 139 798
Customer Service Fax [phone]

www.kambrook.com.au

Due to continual improvement in design or otherwise, the product you
purchase may differ slightly from the illustration in this book. Issue A12

Kambrook - New Zealand

Private Bag 94411
Botany, Manukau
Auckland 2163
New Zealand
Customer Service Line/
Spare Parts 0800 273 845
Customer Service Fax [phone]

www.kambrook.co.nz

Arctic HV

40cm
Pedestal Fan

KFA423

Instruction Booklet

Important

Please retain your instruction
book for future use.

In the event that you need some assistance with your
Kambrook appliance, please contact our Customer Service
Department on 1300 139 798 (Australia) or 0800 273 845
(New Zealand). Alternatively, visit us on our website at
www.kambrook.com.au or www.kambrook.co.nz

Contents

Kambrook Recommends p4
Safety First

Your Kambrook Arctic HV p6
Pedestal Fan

Using Your Kambrook p7
Pedestal Fan

Care and Maintenance p9

3

Kambrook Recommends Safety First

IMPORTANT: Please retain your
instruction book for future use.

At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.

Important Safeguards For Your Kambrook
Arctic HV Pedestal Fan

• Carefully read all ins tructions before operating
the Kambrook Pedestal Fan for the first time
and save for future reference.

• Remove and safely di scard a ny packaging
material and promotional label s before
using the fan for the first time.

• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug
of this fan.

• Ensure that the su rface is level, clean
and free of water and other substances.

• Always ens ure the fan is properly assembled
before use. Follow the instructions provided
in this book.

• Keep the fan cl ean. Fo llow the cleaning
instructions provided in this book.

• Do not leave the fan unattended when in use.

• Do not place anything, on top of the fan when
assembled, when in use and when stored.

• This fan is not intended for commercial
or industrial use.

• Avoid touching mobile parts of the fan.

• Never insert fingers, pencils or any other
objects through the guard s whenever the
power plug is connected, in particular
while the fan i s switched on.

• Do not operate in the presence of explosives
and/or flammable fumes or liquids.

• Do not unplug the fan by pull ing on the cord.

• Never carry the fan by the cord or yank
to disconnect from an outlet; instead grasp
the cord at the plug and pull to disconnect.
Do not pull the cord around sharp edges
or corners.

• The fan must not be used if the grilles are
not fastened correctly a nd the pedestal
stand and base correctly fit ted as per
the instructions provided in this book.

• When unpacking the fan, check to see
you have received all the items listed in the
parts list before discarding the packa ging.

• To avoid electrical circuit overload, it is
recommended that no other ap pliances
are plugged into the sa me circuit as your
fan when it is in u se.

• Disconnect the power plug before dismantling,

bling or before clean ing and when the

assem
fan is not i n use.

4

Important Safeguards For All
Electrical Appliances

• Ful ly unwi nd the power cord before use.

• Connect only to a 230V or 240V power outlet.

• Do not let the power cord hang over the
edge of a bench or table, touch hot
surfaces or become knotted.

• To protect against electric shock , do
not immerse the power cord, power
plug or appl iance in water or any other
liquid, un less it is recommended in the
cleaning instructions.

• The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience a nd knowledge,
unless they have been given super vis ion or
instruction concerning use of the appliance,
by a person responsible for their safety.

• Children should be supervised to ensure that
they do not play with the appliance.

• It is recommended to inspect the appliance
regularly. Do not use the appliance if the
power supply cord, plug, connector or
appliance becomes damaged in anyway.
Return the entire appliance to the nearest
authorised Kambrook Ser vice Centre for
examination and/or repair.

• Any maintenance other tha n clea ning
should be performed at an authorized
Kambrook Service Centre.

• This appliance is for household use only.
Do not use this appliance for other than
its intended use. Do not use in moving
vehicles or boats. Do not use outdoors.

Misuse may cause injur y.

• The installation of a res idual current device
(safety switch) is recommended to provide
additional safet y protection when using
electrical appliances. It is a dvisable that a
safety switch with a rated residual operating
current not exceeding 30mA be installed in
the electrical circuit supplying the appliance.
See your electricia n for professional advice

• Always turn the appliance to the OFF
position, switch of f at the power outlet
and unplug at the power outlet when the
appliance is not in u se.

• Before clea ning, always turn the app liance
to the OFF position, switch of f at the power
outlet, unplug at the power outlet and
remove the power cord, if detachable, from
the appliance and allow a ll parts to cool.

• Do not place this appliance on or near
a heat source, such as hot plate, oven
or heaters.

• Pos ition the applia nce at a minimum
dista nce of 20cm away from walls, cu rtai ns
and other heat or steam s ensitive materials
and provide adequate space above and
on all s ides for air circulation.

5

Your Kambrook Arctic HV Pedestal Fan

HIGH

MED

LOW

OFF

1. Fan head with metal front/back

grilles, metal fan blades, and tilt
adjustment knobs

2. Fan blade size: 40cm

3. Manually adjustable head moves

up and down or left and right

4. Height adjustable pedestal

extension with knob

5. Dial controller with 3 speed settings

6. Carry handle for portability

(not shown)

7. Solid, anti-topple base for stability

Parts List

1. Fan head

7. Base

8. Tilt adjustment knobs (2)

9. Fan Head Screws

10. Height adjustment knob

11. Inner extension tube

12. Outer extension tube

13. Fixing Tube

14. Stability plate

15. Washer

16. Locking screw

6

Using Your Kambrook Pedestal Fan

Before First Use

Remove any promotional material from
the fan.

IMPORTANT:
When unpacking the fan,
check to see you have
received all the items
listed in the Parts List before
discarding the packaging.

Assembling Your Kambrook
Arctic HV Pedestal Fan

Base and Extension Tube
Assembly

1. Place the Fixing Tube into the hole

of the Stability Plate (Fig. 1) then
place both under the Base. Place
the Washer on to the Locking Screw
and fit through the hole at the
bottom of the Stability Plate (Fig. 2).

2. Fit the Outer Extension Tube on to

the Locking Screw and tighten the
Locking Screw firmly. (Fig. 3).

g

Fig. 2

Fig. 3

Fig. 1

NOTE: The Washer fits into the

groove on the bottom of the
Stability Plate and is correctly
fitted if the Locking Screw
protrudes from the other side
of the Base leaving enough
thread to screw onto the
Outer Extension Tube.

Unscrew the Height Adjustment Knob

3.

and pull up on the Inner Extension
Tube to adjust the height, ensuring
that the Height Adjustment Knob is
fully tightened to hold in place before
assembling the Fan Head. (Fig. 4).

Fig. 4

7

Using Your Kambrook Pedestal Fan

continued

-

NOTE:

The Inner Extension Tube is

inside the Outer Extension Tube.

4. Mount the pre-assembled Fan Head to

the Inner Extension Tube and tighten
the Fan Head Screw until it is tight (Fig. 5).

Fig. 5

IMPORTANT: The prongs

on the pre-assembled fan
head assembly may
need to be pried apart
slightly to more easily fit
on to the top of the
extension tube. Do not
force the pre-assembled
fan head onto the
extension tube.

5. Press the two Tilt Adjustment Knobs

firmly on to the bolts located on
either side of the fan head. (Fig. 6)

To Operate the Kambrook
Arctic HV Pedestal Fan

Plug the cord into a 230V or 240V power
point and switch on.

The fan has 3 speeds. To adjust the flow of
air, turn the fan speed dial located at the
back of the fan to the preferred speed ­LOW, MED or HIGH. To turn Off, turn the fan
speed dial to the OFF position.

NOTE: To avoid an electrical
circuit overload, it is
recommended that no other
appliances are plugged into the
same circuit as your fan when it
is in use.

Adjusting Air Flow Direction

To adjust the flow of air left or right, manually
swivel the fan to the desired position.

To adjust the flow of air up or down,
slightly loosen the two tilt adjustment
knobs located on either side of the
fan and tilt the fan either upwards or
downwards to suit. Once the fan is in
the desired position, re-tighten the
two knobs to hold in place.

Adjustable Height

The fan height can be manually adjusted.
Simply loosen the Height Adjustment Knob
on the Extension Tube of the fan, then adjust
to the required height. Re-tighten the Height
Adjustment Knob when the desired height
has been reached (Fig. 6).

Fig. 6

Fig. 6

8

Care and Maintenance

Always turn the fan to the OFF position,
switch off at the power outlet and unplug
at the power outlet before cleaning.

To clean the fan, remove dust that
may have accumulated with a soft
cloth or a vacuum cleaner using the
brush attachment. Wipe the exterior
of the fan with a soft, damp cloth.

Never use an abrasive cleaner. When not
in use, store the fan in a cool, clean and
dry location.

9

Notes

10

Notes

11