4
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Pancake Perfect Breakfast Skillet
• Carefully read all instructions before
operation and save for future reference.
• Remove and safely discard any packaging
material and promotional stickers before
using the skillet for the first time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover that is fitted to the power
plug of the skillet.
• Do not place the skillet near the edge of a
bench or table during operation. Ensure that
the surface is level, clean and free of water.
• Keep the skillet clear of walls, curtains and
other heat or steam sensitive materials.
Minimum 200mm distance.
• Do not place on or near a gas burner,
electric element or in or near a heated oven.
• Do not use on a sink drain board.
• Always insert temperature control probe
into probe socket before inserting power
plug into power outlet and switching on
skillet. Ensure the probe socket is completely
dry before inserting the temperature
control probe.
• The skillet must be used with the temperature
control probe provided. Do not use any other
probe or connector.
• To protect against electric shock, do not
immerse power cord or temperature control
probe in water or any other liquid, or allow
moisture to come in contact with these parts.
• Ensure the temperature control probe has
cooled before removing from the skillet.
• Always remove temperature control probe
before cleaning the skillet.
• If using plastic utensils, do not leave in skillet
when hot.
• Extreme caution must be used when the
skillet contains hot oil or other liquid.
Do not move the skillet during cooking.
Allow the skillet to cool before removing oil
or other liquid.
• Do not touch hot surfaces. Use the handles
for lifting and carrying the skillet.
• Do not leave the skillet unattended when
in use.
• The skillet is not intended to be operated by
means of an external timer or a separate
remote control system.
• Always turn the temperature control probe
to ‘MIN’, then switch off and unplug at the
power outlet and allow probe to cool, then
remove probe from the skillet if skillet is to
be left unattended, if not in use before
attempting to move skillet and before
cleaning.
• Keep the skillet clean. Refer to ‘Care,
Cleaning and Storage’ (page 11).
• Do not place anything on top of the skillet
when in use and when stored.