KAM SOUNDPACK 2 Instruction Manual

SOUND PACK 2

instruction manual

Sound Pack 2

Sound Pack 2

Kam is manufactured and Distributed by Lamba Plc

www.lambaplc.com

Specifications are subject to change without notice.

KAM SOUND PACK 2
Instruction Manual

OVERVIEW

Sound Pack 2 is the perfect home DJ monitoring solution. It has been

designed to deliver clear and powerful sound with plenty of bass response.
Sound Pack 2 should contain the following items;

1 x DJ2 Amplifier
2 x Speakers
2 x speaker cables

SETTING UP

The DJ2 Amplifier has been designed so that it has the correct width
and height to sit between two turntables... with your DJ mixer sat on
top of it.

1. Ensure that the Mains Power [1] is switched off and the Main Volume

[2] control is set at zero.

2. Use the supplied speaker cable to connect your speakers to the DJ2
rear panel Speaker Terminals [3]. Follow the colour coding and
connect red to red and black to black.

3. Connect the audio out from your DJ Mixer to the Line Input [4] of the
DJ2. You can connect any line level audio equipment, but you can’t connect
a turntable directly to the DJ2.

4. Turn on the Mains Power [1].

5. Start your music playing.

6. Turn up the Main Volume control. Providing you have made all the
correct connections and used good cables your should hear music.

You will find loads of useful tips and tricks about setting up and using
your equipment online at www.kam.co.uk/tuition.

SPECIFICATIONS

DJ2 Amplifier

Power 50W per channel
1 x unbalanced line level RCA audio input

Speakers

Max power 75W

6.5” drivers
Soft dome tweeters
Max Sound Pressure Level 89dB
Beech finish
Removable front baffle.

1

3

4

2

DJ2 Amplifier Front Panel

DJ2 Amplifier Rear Panel

- 1 - - 2 -