KAM Simple Precision SR User Manual Lines

KAM® SR™ SAMPLE RECEIVER

PER API 8.2, ASTM D4177
AND ISO 3171

TEL [phone]
FAX [phone]
Email [e-mail]

User Guidelines

SRMANUAL-0416

KAM CONTROLS, INC.

3939 Ann Arbor Drive

Houston, Texas 77063 USA

www.KAM.com

1

2

B B

KAM

®

SR™ SAMPLE RECEIVER

Optional Pressure gauge

CSM CONNECTION

¾" quick connect–

to be connected to suction

on KAM® CSM™ Circulating

Sample Mixer pump

Optional high level switch

(Normally Closed/NC)

Internal spray bar system

Optional high level switch
electrical connection

Sealing lid with security lock

SAMPLER CONNECTION

½" quick connect–
to be connected to KAM® IAS™ Iso­kinetic Automatic Sampler discharge
line

CSM CONNECTION

½" quick connect–
to be connected to discharge line
on KAM® CSM™ Circulating Sample
Mixer pump

Do not use KAM

Prior to use, clean the KAM

®

SR™ if dented or damaged

®

SR™ Sample
Receiver completely by washing with
standard-issue solvent

Make sure KAM

®

SR™ Sample Receiver lid

with O-ring lip is closed and sealed prior to use

Wear protective glasses when handling and
mixing the KAM

KAM CONTROLS, INC. reserves the right to make changes to this document without notice.

®

SR™ Sample Receiver

Do not lay KAM® SR™ Sample Receiver
horizontally when full

Do not transport KAM

®

SR™ Sample Receiver

in a horizontal position

Follow API Chapter 8.2 and 8.3, and ISO 3171
guidelines

Follow local hazardous material
transportation guidelines for all transport

SRMANUAL-0416

KAM CONTROLS, INC.