KAM Digi Mini Instruction Manual

Digi Mini

Audio and video software controller with headphone monitoring

Mix & scratch music and video files with transitions and effects

Comes supplied with FREE Virtual DJ LE™ software for PC/Mac

Built-in audio for monitoring from Digi Mini and your PC/Mac

3 x programmable Hot Cues per channel

Sample and clone functions

Dual scratch effect jog wheels

3 band EQ (hi, mid & low) plus gain

Easy search music library

Crossfader & channel faders

Seamless loop / loop trim

Pitch control & master tempo

Easy search music library

BPM sync

Channel cue monitor

USB bus powered

Compatible with Virtual DJ Pro™ for Mac & PC (sold separately)

M A N U A L V E R S I O N 3 .0

27- 0 8 - 10

For the latest instruction manual updates and information on the entire Kam range visit:

www.kam.co.uk

Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ

Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: [e-mail] • Web: www.lambaplc.com

If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.

Due to continuous product development, specifications and appearance are subject to change.

© COPYRIGHT LAMBA plc 2010. E&O E.

Connection

Connect the Digi Mini to your PC via a USB lead. Speakers can then be connected to the PC and headphones can be
connected to the Digi Mini.

Description of functions

Audio control

1. Master - control the audio output level of PC.

2. Headphones - control the volume of your headphones.

3. Track - press the load A or load B button to select which deck to load the selected track to.
a. Select the track you would like to play.
b. Press the track select button to confirm the selection of a folder or a track.

4. Gain and EQ.
a. Gain - adjust the input signal level.

b. Hi - adjust the input treble response.
c. Mid - adjust the input mid range response.
d. Low - adjust the input bass response.

5. Load A, B/Back - Load the track to respective channel.

6. Play/Pause - play or pause the track.

7. Cue/Play - restart the music from the last memorised point.

8. Set Cue - pause the music and press this button to have a memorised point.

9. Effect/Sample parameter (holding Shift first)
a. EFX-S - Choose a certain effect.
b. EFX1-S - Adjust the parameter 1 of VDJ effect.
c. EFX2 - Adjust the parameter 2 of VDJ effect.

10. Effect ON/OFF - switch on/off digital effect function.

11. Seamless Loop
a. Press in and then press out to form a loop
b. Hold Shift and then press in to decrease the loop length or press out to enlarge the loop length.

12. Scratch - to switch on/off this function.

Manual BPM - hold the shift button to activate manual BPM function, while holding shift tap the scratch button to

calculate BPM reading.

13. PFL - press it to monitor a specific channel. When using sample feature use PFL to assign the channel to be

sampled

14. SYNC - press it to immediately synchronize with the BPM of the other channel.

15. KEY - press it to switch KEY mode on or off. If it is on, the unit maintains at a constant tempo and doesn’t change

while the pitch slider is moving.

16. Line fader - adjust the channel output sound level.

17. Crossfader - switch between or mix together with music of two channels.

18. Pitch fader - use it to adjust the pitch up or down to match the beat with the other channel.

19. Jog Wheel - use it to dial for slight adjusting pitch value or to scratch.

20. SHIFT key for extended menus - hold the shift key to active extended menus buttons. The text in black indicates

the buttons operation in the extended menu. Hold the shift key and the jog wheel will act as a fast search.
Hold the shift key to activate the menu below:

 Audio/video mode switch
 Key adjust - adjust the key of the playing track without adjusting its tempo.
 Folder

1. Open or close a subfolder.

2. Under the track selection mode, it allows you to go back to select the track in the other folder.

 (8,7,6) Hot Cue

1. Set three hot cues at first.

2. Then play any of these three hot cues. *SET cue button can renew the hot cue point being played at the last
time.

 Sample - switch on/off sample function.
 1. EFX-S: Choose a certain sample. 2. EFX1-S: Adjust the parameter 1 of VDJ sample.
 Auto Loop - to shift between the beat value and press OUT button to start auto loop.
 TAP - press with the beat to get a manual BPM value.
 Clone A, B - copy the track of one channel to the other channel.
 Smart loop this allows you to trim the length of the loop you have recorded.
 Smart cue this allows you to cue on the fly without pausing the played track.
 Quick Search

Headphone Output - use it to connect to a 3.5mm plug of a headphone. Front right of unit.
USB Connector - use it to connect with a laptop or a desktop via USB cable.

Video control

Please switch to video mode first to access the following features.

1. Load A, B - load a video file to either channel.

2. Transition - to choose and control the video cross fading effect

3. Effect - to transform the video into a different visual effect.

4. CTRL - the parameter is only for the effect, Boom Auto in LE version.

Specification

Scratch jog wheels
Play / Pause / Cue
3 band EQ (hi, mid & low)
Headphone output
Monitor the audio output through your computer speakers
Seamless loop / loop trim
Fast search forward or backward
Effect select and parameter
Adjust (depth, delay, LFO)
Pitch control
Sampling frequency: 44.1 KHz
Audio resolution: 16 bit
Output level: 1.2V+-0.2V
THD+N: < 0.03%
S/N: > 80dB / Crosstalk: > 80dB
Channel fader
Channel gain
Track select
Channel cue monitor
Master tempo
USB bus powered
Dimensions: 310 x 205 x 38mm / Weighs less than 1Kg

*For an in-depth understanding of the features of the Virtual DJ program, please refer to the Virtual DJ user guide.