KAM BLUE MOVER 500 SD FSCAN Instruction Manual

BLUE MOVER 500 SD FSCAN

500mW blue laser with 20K optical fast scanning motor

Playback of ILDA laser shows through SD card

500mW blue laser @450nm

Scanner system: 20K high speed optical scanner

PC IDLA input and output / LCD display for operating system control

12 channel DMX512 operation

Pre-programmed moving patterns in Auto mode

Sound-to-Light, Auto and DMX modes / Linkable Master/Slave mode

3 pin XLR DMX connection

AC 100V-240V, 50/60Hz input power / Rated power: 50w

Key operated safety control

Adjustable hanging bracket / Tough metal chassis

Dimensions: 310 x 110 x 210mm

MANUAL VERSION 1.0

30 / 11 / 10

For the latest instruction manual updates and information on the entire Kam range visit:

www.kam.co.uk

Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ

Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: [e-mail] • Web: www.lambaplc.com

If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.

Due to continuous product development, specifications and appearance are subject to change.

© Copyright Lamba plc 2010. E&OE.

Thank you for purchasing this product, we are sure that it will serve you for many years to come.

To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the
basic operations of this unit. After you have read the instructions, please retain them for future reference.

This unit has been tested at the factory before being shipped to you.

To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture. To prevent a fire hazard, do not
expose the unit to any naked flame sources. Unplug this apparatus during lightning storms or if it is unlikely to be used for long
periods of time.

When installing the unit, please ensure you leave enough space around the unit for ventilation. Slots and openings in the unit are
provided for ventilation to ensure reliable operation of the product and to protect it from overheating. To prevent fire hazard, the
openings should never be blocked or covered.

Always handle the power cable by the plug. Never pull out the plug by pulling on the cable. Never touch the power cable when
your hands are wet as this could cause an electric shock. Do not tie a knot in the cable. The power cable should be placed such
that it is not likely to be stepped on. A damaged power cable can cause a fire or give you an electrical shock. Check
the power cord periodicaly, if you ever find that it is damaged, replace it before using the unit again. Contact your retailer for a
replacement.

The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area
where this unit is to be used meets the required written on the unit.

The lightning flash symbol inside a triangle is intended to alert the user to the
presence high voltage within the unit’s enclosure that may be of sufficient power to
constitute a risk of electrical shock to persons.

Caution: to prevent the risk of electric shock, do not attempt to open the unit. No user-serviceable parts inside. Refer all
servicing to qualified service personnel.

The exclamation mark inside a triangle is intended to alert the user to the presence of important operating and
maintenance instructions in the literature accompanying the appliance.

Any modification carried out on the unit may invalidate the unit’s warranty.

Do not aim this laser directly into an audience and ensure any part of the lowest scanned beam is above head height.
(Ideally greater than 3m). Visible and invisible laser-light, direct beam will damage the human eye and the eyes of
animals. Do not look at any Laser light directly.

Do not touch the laser aperture with the hand. When cleaning the laser aperture, please use a soft cloth with alcohol or
camera lens paper.

In the unlikely event that you hear unusual noise, see smoke, feel excessive heat or smell anything unusual, immediately unplug
the power source and contact your retailer. Continued use may result in fires or electrical shock.

Do not use flammable sprays near this equipment. Also do not spill water, liquids, or flammable liquids on the equipment. If fluids
enter this equipment and contact the electrical parts, fires or electrical shock may result. If anything enters the equipment,
immediately unplug the power supply and contact your retailer.

If applicable, only use the stand, tripod or bracket specified or sold with the apparatus.

Select the installation location of your unit carefully. Avoid placing it in direct sunlight or locations subject to vibration and
excessive dust. Do not use the unit where there are extremes in temperature (below 41ºF / 5ºC or exceeding 95ºF / 35ºC).

Unpacking and safety: Please unpack your new product carefully, your new product should reach you in perfect condition. Please
check that no damage has occurred during transit. If any damage is found, do not operate your unit. Please contact the retailer
you purchased it from immediately. If there is any damage to the mains cable do not use the device. Always disconnect the unit
from the mains supply when carrying out any servicing or cleaning of the unit.

The serial number for this equipment should be located on the rear or underside of the unit. Please make a note of this number as
you will need it for your warranty, it is a good idea to keep a copy of the serial number for your own records.