Kalorik Digital kitchen scale withvolume measuring function, USK EKS 39724 User Manual
Copies of the I/B. Please reproduce them without any
Fax +1 305 430 9692
changes except under special instruction from Team
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity. Print only
Bascula de cocina digital con
función de cálculo de volumen
what is inside the frame,
Digital kitchen scale with
volume measuring function
Balance de cuisine digitale
avec fonction de mesure des
volumes
USK EKS 39724
www.KALORIK.com
2 x 1.5V (AAA batteries)
Front cover page (first page)
Assembly page 1/28
Copies of the I/B. Please reproduce them without any
Fax +1 305 430 9692
changes except under special instruction from Team
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity. Print only
what is inside the frame,
IMPORTANT SAFEGUARDS
Please read these instructions carefully before using the appliance.
Important: People (including children) who are not able to use the
appliance in a safe way, due to their physical, sensorial or mental capacity
or their lack of experience or knowledge, must never use the appliance
except if they are supervised by a person responsible for their safety or if
they previously received instructions concerning the safe use of the
appliance.
Close supervision is necessary to prevent children from using the appliance
as a toy.
• Never leave the appliance unsupervised when in use.
• From time to time check the appliance for damages. Never use the
appliance if it shows any signs of damage. All repairs should be
made by a qualified electrician.
• Only use the appliance for domestic purposes and in the way
indicated in these instructions.
• Never immerse the appliance in water or any other liquid for any
reason whatsoever.
• Before cleaning, always remove the batteries.
• If the batteries leak, remove them, clean the contacts of the
appliance and wash your hands.
• If you do not use the appliance for a long time, remove the batteries
so that they do not leak.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
NOT SUITABLE FOR TRADE
2
Assembly page 2/28
EKS 39724 - 120501
Copies of the I/B. Please reproduce them without any
Fax +1 305 430 9692
changes except under special instruction from Team
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity. Print only
what is inside the frame,
CHARACTERISTICS OF YOUR SCALE
• Removable Stainless steel measuring bowl, hygienic and easy to
clean
• Automatic switch-off
• Backlit LCD display
• Two weight unit systems: convertible g / lb. + oz. (1 ounce = 28.35 g)
• Maximum weight (for normal weighing) = 5000 g / 11 lb.
• Precision of the measurement = 1 g / 0.1 oz
• Automatic conversion of the weights into volumes (ml or US cups / Fl.
Oz.; for common ingredients like flour, water, milk or Oil).
• Low battery indicator and overloading indicator
BEFORE THE FIRST USE
This appliance works with 2 batteries (1.5V, type AAA,
not included). To install, remove the lid of the battery
housing on the bottom part of the scale. Place the
batteries, making sure to respect the polarity indicated
in the battery compartment, and then put the lid back
in place. You can now use your scale.
HOW TO INSTALL OR REMOVE THE BOWL
To remove:
• Using your thumb, slide the sliding
closure towards the handle to
release the bowl.
• Remove the stainless steel bowl with
your other hand
• Release the sliding closure
To install:
• Align the plate on the bowl with the
handle
• Insert the plate on the bowl into the
groove below the sliding closure.
• Press the bowl in place until you hear
a click sound indicating the sliding
closure is in place and the bowl is
locked
Body
Bowl
Plate
Sliding closure
Groove
Buttons Scale
LCD Display
3
Assembly page 3/28
EKS 39724 - 120501
Fax +1 305 430 9692
mode conversion
conversion
FUNCTION BUTTONS
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity. Print only
what is inside the frame,
ON/OFF/ZERO
Press MODE for
Press UNIT for unit
1. The On/Off-zero button is used to switch the scale on or off, and to
reset the scale to 0.00 (Tare function).
2. The mode conversion button is used to switch mode: press in
sequence to set the scale to Weighing mode / Water mode / Milk
mode / Oil Mode / Flour mode and then again: Weighing mode ….
Press MODE Press MODE
Weight
mode
Press
MODE
Press
MODE
Milk Volume mode Water Volume mode
Oil Volume mode
Press
MODE
Flour Volume mode
3. The Unit button is made to switch from
• g to lb:oz in weighing mode
4
Press UNIT
Assembly page 4/28
EKS 39724 - 120501
Fax +1 305 430 9692
“Mode” settings
• Fl. Oz. or ml to US cups in the Water, Milk and Oil mode
LCD DISPLAY
Volume Unit (Fl. Oz.)
Volume Unit (US Cups)
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity. Print only
what is inside the frame,
Press UNIT
Arrow indicators in
Tare function symbol
Weight Unit (lb:Oz)
WEIGHT UNIT
Your scale allows you to use the metric measurement system (grams) OR
the imperial system (lb.; ounce). Choose the measurement system at any
time by pressing the “Unit” button (lb:oz … g), depending on the
measurement system you wish to use. This button is situated above the LCD
display.
USE
Put the scale on an even and hard surface, for instance a table or
countertop. Avoid soft surfaces.
5
Assembly page 5/28
Weight unit (g)
Volume Unit (ml)
EKS 39724 - 120501
Copies of the I/B. Please reproduce them without any
Fax +1 305 430 9692
changes except under special instruction from Team
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity. Print only
what is inside the frame,
WEIGHING
1) Place the stainless steel bowl (if used) in place on the scale, before
turning on the scale.
2) Switch the scale on using the on/off switch situated on the top of the
control panel. LCD screen will initialize.
3) The scale will turn on and the LCD display will show “0 g” or “0:0.0
lb:oz.”.
4) Put the object you want to weigh on the scale. The stabilized weight
is displayed. In the imperial weighing mode, the weight is indicated
in US pounds (lb.), US ounces (oz.) and tenth of ounces. (for example
the weight display 2:3.2 means 2 lb., 3Oz. and 2/10 oz.).
5) Remove the object from the platform.
6) The scale turns off automatically after 30 seconds. You can also
switch the scale off anytime by keeping the on/off switch pressed.
7) If the scale goes off automatically, press on the ON/ZERO button to
switch on again.
THE TARE FUNCTION
The tare function is extremely useful to calculate the weight of ingredients
that cannot be put directly on the platform. For
example flour, or liquids, which require a
container before weighing, or for weighing
ingredients that are added after the first
weighing, without having to remove the initial
product.
Press
“On/Zero”
In order to use this function, proceed with the first
weighing, let the weight stabilize, and then press
the “On/Zero” button above the LCD display.
The scale will reset, display a “T” at the lower left
corner, and indicate now 0g or 0:00.0 lb:oz. Add
the new ingredient to weigh. The weight
indicated on the display is the weight of the
ingredient added after the reset to zero!
Note: When you remove the container from the platform, the LCD display
will show the weight as negative (“-” will appear on the left-hand side). To
reset, press “On/Zero” again.
6
Assembly page 6/28
EKS 39724 - 120501
Copies of the I/B. Please reproduce them without any
Fax +1 305 430 9692
changes except under special instruction from Team
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity. Print only
what is inside the frame,
VOLUME MODE
This measuring cup scale can convert the weight of the
most common ingredients automatically into volume
measurements (ml; Fl. Oz. or US cups).
For example, to measure milk in US cups, proceed as
Press
“On/Zero”
follows:
• Place the scale on a flat surface, with a
container such as the stainless steel bowl
supplied.
• Press On/Zero button to turn on the scale.
Press
MODE
• Wait until “0” is displayed.
• Set the weighing system to metric or imperial
using the UNIT button (if needed).
• Press the MODE button to select Water, Milk, Oil
or Flour – an indication arrow shall appear in in
front of the ingredient selected.
• Press the UNIT button to display the volume in US
Press UNIT
Cups.
• The display shows now the volume of the
ingredient selected, in US cups.
• Add the ingredient to measure.
• By pressing UNIT again, you can switch back to
ml or Fl. Oz., depending on the weighing system
Add Liquid
initially selected.
ERROR INDICATION
If the display shows symbols randomly or if the scale doesn’t turn off
automatically, it means that your scale has a problem (wrong initialization
or weighing error). Remove any object from the scale and wait for it to turn
off. Make sure the steel bowl is well in place (if used). Then start again.
If the problem goes on, remove the batteries for 10 seconds, and then put
them back in place.
7
Assembly page 7/28
EKS 39724 - 120501
Copies of the I/B. Please reproduce them without any
Fax +1 305 430 9692
changes except under special instruction from Team
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity. Print only
what is inside the frame,
WARNING INDICATORS
1. If the “Lo” symbol is displayed on the LCD screen, it means that the
batteries of your scale are low and should be replaced soon. Please
dispose of the old batteries in an environmentally friendly way.
2. If the ”Err” symbol appears on the LCD screen, it means
that the maximum weight accepted by your scale is
exceeded, please remove the object from the scale in
order not to damage your scale.
BATTERY
If your appliance does not work properly, it is probably because the
batteries are dead. In that case, replace them with new ones of the same
type (see paragraph “Before the first use”).
Please dispose of the old batteries in an environmentally friendly way.
TIPS FOR USE AND MAINTENANCE
• Be careful when manipulating the scale because it is a precision
device.
• Clean the outside parts only with a lightly damp cloth.
• All plastics parts shall be cleaned immediately after contact with fat,
vinegar, spices or strongly flavored foods. Avoid contact with acid
juices
• Never use abrasive products to clean your scale.
• Remove the bowl for cleaning. Ensure it is empty before removing.
Clean the bowl in warm soapy water.
• NEVER USE THIS APPLIANCE NEAR WATER; NEVER IMMERSE THE SCALE
ITSELF IN WATER OR ANY LIQUID WHATSOEVER.
• Keep the scale in a cool and dry place.
• Treat with care. Do not strike, shake or drop the scale
PROTECTION OF THE ENVIRONMENT
In order to preserve our environment and protect human health, the waste
of electrical and electronic equipment should be disposed of in
accordance with specific rules with the implication of both suppliers and
users. For this reason, as indicated by the symbol on the rating label or on
the packaging, your appliance should not be disposed of as unsorted
municipal waste. The user should bring it to a municipal collection point
performing waste recovery by means of reuse, recycling or use for other
applications in accordance with the directive.
8
Assembly page 8/28
EKS 39724 - 120501
Copies of the I/B. Please reproduce them without any
Fax +1 305 430 9692
changes except under special instruction from Team
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity. Print only
what is inside the frame,
WARRANTY
We suggest that you complete and return the enclosed Product
Registration Card promptly to facilitate verification of the date of
original purchase. However, return of the Product Registration Card is
not a condition of these warranties. You can also fill out this warranty
card online, at the following address: www.KALORIK.com
This KALORIK product is warranted in the U.S.A. for 1 year from the
date of purchase against defects in material and workmanship. This
warranty is not transferable. Keep the original sales receipt. Proof of
purchase is required to obtain warranty performance.
During this period, if the KALORIK product, upon inspection by
KALORIK, is proven defective, it will be repaired or replaced, at
Kalorik’s option, without charge to the customer. If a replacement
product is sent, it will carry the remaining warranty of the original
product.
This warranty does not apply to any defect arising from a buyer's or
user's misuse of the product, negligence, failure to follow KALORIK
instructions noted in the user’s manual, use on current or voltage
other than that stamped on the product, wear and tear, alteration
or repair not authorized by KALORIK, or use for commercial purposes.
There is no warranty for glass parts, glass containers, filter basket,
blades and agitators, and accessories in general. There is also no
warranty for parts lost by the user.
ANY WARRANTY OF MERCHANTABILITY OR FITNESS WITH RESPECT TO
THIS PRODUCT IS ALSO LIMITED TO THE ONE YEAR LIMITED WARRANTY
PERIOD.
Some states do not allow limitation on how long an implied warranty
lasts or do not allow the exclusion of incidental or consequential
damages, so the above limitations may not apply to you. This
warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
9
Assembly page 9/28
EKS 39724 - 120501
Loading...