Kalorik BL 25280, BL 24242 User Manual

Blender

Batidora de Vaso

USK BL 24242/BL 25280

www.KALORIK.com

120V~60Hz 500W

IMPORTANT SAFEGUARDS

When using your appliance, basic safety precautions should always
be followed, including the following:

1. READ ALL INSTRUCTIONS

2. Check that your mains voltage corresponds to that stated on the
rating plate of the appliance before using the appliance.

3. To protect against electrical shock do not immerse cord, plug, or
the motor unit in water or other liquid.

4. Close supervision is necessary when the appliance is used by or
near children.

5. Unplug from outlet when not in use and before putting on or
taking off parts or before cleaning.

6. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions or has been damaged in any
manner. Return appliance to the nearest authorized service
facility for examination, repair, or adjustment.

7. The use of accessory attachments, including the pouring jar, not
recommended by the appliance manufacturer may cause
injuries.

8. Do not use outdoors.

9. Do not let cord hang over edge of table or counter or touch hot
surfaces.

10. Do not place on or near a hot gas or electric burner, or in a
heated oven.

11. Always attach plug to appliance first, then plug cord into the wall
outlet. To disconnect remove the plug from the wall outlet.

12. Do not use appliance for other than intended use.

13. This kind of appliance cannot function continuously, it is not a
professional type of appliance. It is necessary to make temporary
stops. Check the section "Important information" in the instruction
manual.

14. It is absolutely necessary to keep this appliance clean at all times
as it comes into direct contact with food.

15. The pouring jar should be assembled correctly on the motor base
before you plug it into the mains. The appliance is equipped with

2

USK BL 24242/BL 25280 - 090602

a safety, which prevents the pouring jar from working if it is not
assembled correctly. Furthermore the pouring jar should be
locked so that the appliance can work.

16. The appliance is designed for the preparation of small quantities
of food, which have to be consumed rather quickly. It is not
designed for the preparation of large quantities at once.

17. Keep hands and utensils out of container while blending to
reduce the risk of severe personal injury and/or damage to
blender. A rubber spatula may be used but must be used only
when blender is not running.

18. Do not use a broken, chipped or cracked blender jar.

19. To reduce the risk of injury, never place the cutting unit blades on
base without jar properly attached. Blades are sharp, handle with
care.

20. Always operate the blender with cover in place.

21. Always close the jar with the lid before starting mixing. When
mixing hot liquid, do not fill more than 2/3 of the jar and be very
careful in order to avoid splashing of hot liquid, otherwise you can
get burned. Do not forget to close the feeding hole of the
pouring jar with the cap.

22. Screw on blade assembly firmly. Injury can result if moving blades
accidentally become exposed.

23. Do not leave blender unattended while it is operating.

24. To disconnect, press the ON/OFF key, then remove the plug from
wall outlet.

SAVE THESE INSTRUCTIONS

POLARIZED PLUG INSTRUCTIONS

Some appliances are equipped with a polarized plug (one blade is
wider than the other). To reduce the risk of electric shock, this plug
will fit into the polarized outlet only one way. If the plug does not
properly fit into the outlet at first, reverse it. If it still does not fit,
contact a competent qualified electrician. Do not attempt to modify
the plug in any way.
For appliances equipped with a standard plug, simply insert the plug
into the outlet without paying attention to the way you plug it.

3

USK BL 24242/BL 25280 - 090602

SHORT CORD INSTRUCTIONS

A short power supply cord is provided to reduce the hazards resulting
from becoming entangled in, or tripping over a longer cord.
Extension cords may be used if care is exercised in their use.

• The electrical rating of the extension cord should be at least

that of the appliance. If the electrical rating of the extension
cord is too low, it could overheat and burn.

• The resulting extended cord should be arranged so that it will

not drape over the counter top or tabletop where it can be
pulled on by children or tripped over.

PART DESCRIPTION

1. Measuring cap

2. Lid

3. Glass jug

4. Press ring

5. Sealing ring

6. Cutting blade

7. Jar base

4

8. Jug assembly

9. Motor block

10. Rotary speed control knob

11. Pulse button

12. Ice button

13. Smoothie button

USK BL 24242/BL 25280 - 090602

IMPORTANT INFORMATION

This appliance is not for professional use. You should follow the
requested breaks. Failure to follow this instruction carefully may result
in damage to the motor. The maximum continuous usage time is 3
minutes. After 3 minutes of continuous use, you should insert a break
of at least 10 minutes.

ASSEMBLY OF THE BLENDER AND USE

CAUTION!

Your appliance is fitted with a security device allowing the
functioning of the appliance only when the jar is correctly placed on
the motor block. If the jar is correctly positioned and the appliance
does not start, call your after sales service.

If the blade is disassembled from the bottom of the jar, check the
cleaning section for mounting instructions before continuing.

• Press the press ring into the bottom of glass jar.

• Put the silicone sealing ring carefully on the inner edge of the

blade unit.

• Put the blade unit with sealing ring into the jar base.

• Assemble the pouring jar on jar base of the motor block by

turning it clockwise and make sure it is correctly positioned,
otherwise the appliance will not work.

• Remove the lid of the blender.

• Fill the pouring jar with the chosen ingredients.

•

Close the lid. Place the measuring cap into the hole of the lid and
turn clockwise to lock.

• Plug in the appliance.

• Choose the mixing speed with the rotary button on the motor

base.

Pulse function

The position "P" (Pulse) is particular because the button has to be
kept manually. This position is generally used to crush ice in order to
avoid damages on the blades, but it can also be used to complete
the mixing. The blender runs in high speed as long as you push the

5

USK BL 24242/BL 25280 - 090602

button. This button is only intended for short powerful bursts, not
continued use. You might damage your appliance is using the “Pulse
button” continuously.

Smoothie function

Press “smoothie button”, the blender keeps on running in high speed.
After pressing the “smoothie button” again, the blender will stop
working and all the three indicator lamps will flash.

Ice crushing function

Your blender is equipped with six blades and is perfectly adapted to
ice crushing. Press the “ice button”, the blender runs in 1 second
blending and 0.5 second stop cycles, the pilot light is ON (the other
two indicator lamps are OFF). Once the desired level of grinding is
achieved, press the “ice button” again, the motor will stop working
and all the three indicator lamps will flash.

Note : These three push buttons can be pushed at wish, no
matter what situation it is running. The rotation speed is factory set for
each function, and the rotary speed control is disabled in case the
automatic functions such as “Ice Crushing” or “Smoothie” are
selected. The Blender always runs in high speed in such situation.

• It is also possible to add liquids or other ingredients anytime

without stopping the appliance. You only have to remove the
cap, which closes the feeding opening by turning and raising it
straight up.

• Once you have finished the preparation, stop the appliance and

unplug the appliance.

• Remove the jar from the base. Then remove the lid and pour the

liquid in the desired receptacle.

6

USK BL 24242/BL 25280 - 090602