Kallista P29517 Installation Manual

Two-Handle Wall-Mount Bath Valve

INSTALLATION INSTRUCTIONS

P29517

1085232-2-A
© 2013 KALLISTA

1 of 4

Questions? Problems? For additional assistance, please contact KALLISTA’s Customer

Service Department at 1-888-4-KALLISTA (1-888-452-5547) or FAX [phone].

Two-Handle Wall-Mount Bath Valve

INSTALLATION INSTRUCTIONS

THANK YOU FOR CHOOSING KALLISTA

We appreciate your commitment to Kallista quality products. Please take a moment to review this manual
before you install your Kallista product. If you encounter any installation or performance problems, please do
not hesitate to contact us at the phone number listed at the bottom of the page.

BEFORE YOU BEGIN

IMPORTANT! This valve is intended for bath-only applications.

NOTE: The installation of water hammer arrestors is not required but is recommended. Installing water hammer

arrestors may reduce or eliminate the possibility of water hammer when the user turns the handles to the ON or
OFF position.

 Please read all instructions before you begin.
 Observe all local plumbing and building codes.
 Shut off the main water supply.
 Before installation, unpack the components and inspect them for damage. Return the components to the

carton until you are ready to install.

 Kallista reserves the right to make revisions in the design of products without notice, as specied in the

Price Book.

TOOLS AND MATERIALS

Pipe Wrench Level

Adjustable Wrench

Assorted ScrewdriversStrap Wrench SolderSealant TapePlumbers Putty

Plus:

● Conventional woodworking tools and materials

● Lumber for backer boards

● Screws for mounting valve body to backer boards

● 1/2" drop ear ell

● 1/2" NPT pipe

● 1/2" nipple

Hacksaw or Tubing Cutter

Propane
Torch

1085232-2-A
© 2013 KALLISTA

2 of 4

Questions? Problems? For additional assistance, please contact KALLISTA’s Customer

Service Department at 1-888-4-KALLISTA (1-888-452-5547) or FAX [phone].