Kallista P24300, P24301, P24300-00, P24300-TL, P24301-00 Installation Instructions Manual

1072008-2-B
Page 1 of 4

Questions? Problems? For additional assistance, please contact Kallista's Customer

Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].

INSTALLATION INSTRUCTIONS

P24300, P24301

Single Control Lav Faucet

P24301-00 P24301-TL

P24300-00 P24300-TL

1072008-2-B
Page 2 of 4

Questions? Problems? For additional assistance, please contact Kallista's Customer

Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX [phone].

INSTALLATION INSTRUCTIONS

P24300, P24301

Single Control Lav Faucet

THANK YOU FOR CHOOSING KALLISTA

BEFORE YOU BEGIN

TOOLS AND MATERIALS

1. INSTALL HOSES INTO THE FAUCET

We appreciate your commitment to Kallista quality products. Please take a moment to review this manual before
you install your Kallista product. If you encounter any installation or performance problems, please do not
hesitate to contact us at the phone number listed at the bottom of the page.

Prior to installation, unpack the faucet and drain and inspect it for damage. If the product is damaged,
please contact Kallista immediately at the phone number listed at the bottom of the page.

Shut off the main water supply.

Observe all local plumbing and building codes.

If possible, install the faucet to the lavatory before installing the lavatory.

Kallista reserves the right to make revisions in the design of plumbing products without notice, as specified in
the Price Book.

Adjustable

Wrench

Hex

Wrench

Thread

Sealant

Plumbers

Putty

Insert the lift rod in small hole in escutcheon. Slide
escutcheon up to bend in lift rod.

Ensure that O-ring is installed in bottom of escutcheon.

Feed the hoses through the escutcheon one at a time.

Install escutcheon onto bottom of faucet, guiding lift rod
into slot in back of faucet.

Install the mounting stud into the bottom of the faucet.

Mounting Stud

Escutcheon

O-ring

Lift Rod