Browser Interface
Customize your system from your computer at home. Manage movie and
music libraries. Even synchronize your music to iTunes.
To access the browser interface, enter one of the following URLs:
http://my-kaleidescape (Windows)
http://my-kaleidescape.local (Mac)
Or enter the browser interface URL found on the onscreen display.
Press the MENU button on the remote, select the System option, and go
to System Summary.
Support and Documentation
Contact your Kaleidescape dealer or visit our website for additional information.
For documentation, go to www.kaleidescape.com/docs
For how-to videos, go to www.kaleidescape.com/videos
For additional information, contact Kaleidescape Support.
• Send an email message to support@kaleidescape.com.
• Call the support line at +1 (650) 625-6160.
Copyright © 2010 Kaleidescape, Inc. All rights reserved. Kaleidescape and the Kaleidescape logo are trademarks of
Kaleidescape, Inc. and are registered in the United States and certain other jurisdictions. iTunes and Mac are trademarks
of Apple Inc. Other trademarks and trade names are owned by third parties and may be registered in some jurisdictions.
Kaleidescape Part No. 101-0171-00 Rev 1
Cinema One
Quick Install Guide
Control Buttons Other Resources and Support
Eject To open or close the disc tray, press the EJECT button.
Play To play a DVD or CD without importing it, place the DVD or CD
in the disc tray and press the PLAY button. You can also use the PLAY
button to cancel an import and begin playing the disc.
Import To import a DVD or CD into the system, place the DVD or CD in
the disc tray and press the IMPORT button. You can also use the IMPORT
button to stop playing a disc in the tray and begin importing it.
Power To turn on the Cinema One or to put it in standby, press the
POWER button.
500
500
500
500
To access the Cinema One
control buttons, fold down
the front panel.
EJECT button
IMPORT button
POWER button
PLAY button
Cinema One comes with network, power and HDMI cables, a Kaleidescape
Remote and a Child Remote.
A rack-mount kit is also included to install the system in an equipment rack (see
separate instructions).
The Kaleidescape Cinema One houses disk cartridges that contain high-capacity
hard drives to store movies and music. Disk cartridges are easily damaged.
When handling the Cinema One, handle with care to prevent damage to drives
and protect content.
Do not remove disk cartridges unless instructed by Kaleidescape.
Install SystemUnpack System Connect Cables
Info
OK
Menu
1
2
3
4
5
6
7
8
0
9
DISC
MENU
NOW
PLAYING
INTERMISSION
ENTER
CANCEL
SHUFFLE
When lifting the system, grasp
the bottom with two hands.
1 Place the Cinema One on a stable surface or mount in an equipment rack.
Clearance
• There must be a 1 inch clearance in front and a 2 inch clearance
at the back and all vents and grilles must be unobstructed.
• The system has a hinged front panel. Allow for enough space for
the disc tray to slide out completely.
Environment
• Ambient air must be relatively dust-free.
• Temperature must be between 41°F (5°C) and 95°F (35°C).
2 Connect the network cable from the Cinema One to the home
Ethernet network.
3 Connect an HDMI cable from the Cinema One to the TV. If using
an audio receiver, connect audio cable.
4 Connect the power cord. The front panel of the system should
glow blue.
NETWORK
HDMI COAXIAL
OPTICAL R
USB
NETWORK
COMPOSITE HDMI COAXIAL
AUDIO
S-VIDEO
USB
!
AC-IN
ZONE 1 ZONE 2
COMPONENT
CONTROL
NETWORK
COMPOSITE HDMI COAXIAL
OPTICAL R L R L
ZONE 3
IR-IN
!
AC-IN
R L
AUDIO
S-VIDEO
VIDEO
Pb PrY
USB
NETWORK
CONTROL
Network
Power
TV
2 in.
1 in.
Loading...