Kaiser Baas X2 Complete User Manual
1
x2
Complete User Guide
X2 Action Camera
Join the social movement and follow us on
Disclaimers & Warnings
Product Diagram
Setup your X2
Capture Videos & Photos
Menu Settings
Eect Settings
General Settings
WIFI Guide
Battery Guide
Maintenance
FAQ
Specications
Support
04
05
08
10
10
15
10
19
20
21
21
23
25
Contents
DISCOVER: ADVENTURE
Share your footage with us on social media
#KBdiscover
To view the entire Kaiser Baas
product range visit:
www.kaiserbaas.com
3 4
Disclaimers & Warnings
• DO NOT use the camera in water without
the waterproof case.
• Always check the waterproof case seal is
clean and free of debris prior to use in water.
• Always check the charge port cap on the
waterproof case is tightened fully prior to
use in water.
• IMPORTANT! - The waterproof case
charge port and USB cable are only splash/
water resistant. DO NOT submerge them
underwater. Failure to observe may result
in damage to the camera.
• Always ensure the USB connection is
covered during wet conditions.
• DO NOT attempt to open the camera or
modify it in any way. If the camera has
been opened the warranty will be void.
Maintenance and repairs should only be
performed by Kaiser Baas.
• DO NOT handle or charge the camera
without its waterproof case using wet hands.
Failure to observe this may result in damage
to camera and persons.
• ONLY recharge the camera battery using
the supplied USB cable.
• If using a wall charger, ensure that it is a
certied product for your region. AC Input:
100-240VAC 50/60Hz. DC Output: 5V 1A.
Only use a USB wall charger with suitable
approval and certication. Do not charge in
conditions outside of the 10°C - 45°C range.
If you do not know the voltage and current
of your charger, use the included cable to
charge from your computer.
• The camera should not be used in heat
exceeding 55°C (131°F).
• DO NOT drop, crush, pierce, bend, deform,
microwave, incinerate or shoot the camera.
Before operating
please ensure
you have read
and understood
the safety
precautions
5 6
LCD Screen
MicroSD Card Slot
Micro HDMI Slot
Micro USB Port
G
L
K
H
MI
J
Product Diagram (Back)
Recording LED
Battery Slot
Battery Door
Product Diagram (Front)
Power/Menu Button
REC/OK
WiFi
Charging Indicator LED
Operation Indicator LED
Lens
A
A
B
B
D
C
C
F
E
F
E
D
G
M
L
K
H
I
J
7 8
Set up your X2 Camera
Welcome to your new KB Action Camera.
Before you get shooting, please review
the User Guide carefully to ensure you
get the maximum performance out of
your camera.
Battery Charging
We recommend that you fully charge
your camera before use.
A full charge is approximately 2.5 hours
using a 5V 0.5/1A Charger.
The charging indicator LED light on the
top of the camera will be RED when
charging and will be OFF when charged.
For further important information about
the battery, see the Battery Guide.
Product Diagram (Case)
Case Latch
Power/Menu Button
REC/OK
Wi-Fi
Waterproof Case Lens
A
B
D
C
E
MicroSD Card Compatibility
Your camera requires a MicroSD Card
(not included).
Kaiser Baas recommends the use of a
brand name Class 10 or higher MicroSD
Card. Any content recording higher than
1080P@60FPS will require a Class UHS-1
or higher card.
There is only one correct way to insert
the MicroSD card. Do not force the card
into the slot as it may damage the camera
and card.
The maximum card size is 32gb.
You can nd the list of recommended
MicroSD cards for this camera at:
www.kaiserbaas.com/support
B
C
D
E
A
Loading...