R30 CAR DVR
Capture your journey
USER GUIDE
Languages
English 4
4
English
Community
Tech support:
e: helpdesk@kaiserbaas.com
w: www.kaiserbaas.com/support
p: Australia 1300 302 306
p: New Zealand 0800 302 306
(business hours, AEST)
/kaiserbaas
Register this product for 12 month warranty:
www.kaiserbaas.com/register
Get product updates:
www.kaiserbaas.com/updates
5
English
Contents
Safety Precautions 6
What’s in the Box 7
Product Diagram 8
Setting up the R30 Car DVR 9
In Car Operation 10
Computer Connection 11
Wifi Set Up (for Android and iPhone) 12
Software 13
App 18
LED Indication 23
Specifications 24
Frequently Asked Questions 25
Contact Us 26
6
English
Safety Precautions
Before using your R30 Car DVR, please ensure you have
read and understand all of the safety precautions below.
• Only use the provided power cables to charge the
device.
• Do not expose the R30 Car DVR to water, dust, oil and
temperatures over 60˚c.
• Avoid leaving your R30 Car DVR in direct sunlight for
prolonged periods of time.
• Please do not attempt to adjust the camera settings
while you are operating your vehicle.
PLEASE USE YOUR CAMERA WITHIN YOUR COUNTRIES ROAD
LAWS. PLEASE CHECK YOUR LOCAL ROAD LEGISLATION
BEFORE USE.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications.
7
English
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
• (1) this device may not cause harmful interference, and
• (2) this device must accept any interference received,
including interference that may
cause undesired operation.
8
English
What’s in the Box
Please ensure the product package has all the following
contents:
B
A
B
C
F
G
E
D
D
E
F
G
C
R30 Car DVR
Mount
Micro USB Cable
User Guide
USB Car Charger
6 x Cable Management Clips
USB DC power cable
A
9
English
Product Diagram
GPS
WiFi
WiFi
1
Wide Angle Lens
2
Mounting Socket
3
Micro USB Port
4
DC Power Port
5
Micro SD Slot
6
GPS LED Indicator
7
Status LED Indicator
8
Wifi LED Indicator
9
Capture Photo Button
10
Event Recording Button
11
WiFi Button
12
Reset Button
10
7
1
2
8
12
119
6
5
4
3
Front
Side
Bottom
Back
10
English
Side
Setting up the R30 Car DVR
• Insert Micro SD card in the
Micro SD card slot on the
side of the R30 Car DVR.
• Camera will power up and
start recording as soon as
it receives power from the
DC power connection (eg.
when you start your car).
• Clean the area on your windscreen making
sure desired placement is not blocking the
drivers view.
• Attach the R30 to the mount by sliding
the camera connection from right to left
along the mount connection until latched.
• Remove the protective skin from the 3M
adhesive on the mount.
• Stick the adhesive to the inside of the
front windscreen in the desired position,
and press for 30 seconds to ensure that
the camera is secure.
• Adjust the nut to ensure that the camera is
correctly angled.
• Finally connect the R30 to power using
the DC power cable and the USB car
charge adaptor.
General:
Car set up:
Side
11
English
In Car Operation
• Once the R30 Car DVR is set up and connected to DC
power, the camera will automatically power on and start
recording when the car is started.
• The R30 requires a class 6 or above Micro SD card (not
included) with at least 8Gb of free space.
• The internal G sensor will register any bumps that could
be accidents and registers them as an “Event”. These
event files will not be recorded over by regular footage,
these files need to be manually deleted from your SD
card using either the App or the provided software.
• Event recording can be manually triggered using the “!”
button.
• Still photos can be taken using the camera (
) button.
12
English
Computer Connection
• Download and install the supplied Motor+ software to
your PC or Mac. The software can be found at:
www.kaiserbaas.com/software/r30
• Follow the on screen set up guide.
• Connect your R30 Car DVR to your computer using the
supplied micro USB cable.
• Open the Motor+ software.
• Select if you want to review media on the camera (left
icon), or your computer (right icon).
Note: For more information on software functions please see section marked “Software”.
13
English
• Download the Motor Plus app by going to:
www.kaiserbaas.com/apps/r30
For a link to the Drive+ App in the App Store.
• Power on your camera by connecting the DC power to
a USB outlet. From here the WiFi LED should turn on
indicating that it is broadcasting a signal.
• In your phones Settings menu, go to your WiFi connection and connect to the camera’s wireless connection
“MOTORPLUS”
(If you cannot find the WiFi signal, turn the WiFi o using the
physical button on the device marked “WiFi”, and then turn back
on by holding the same button until the WiFi light glows green and
the device will say “WiFi start up”)
• Please enter the generic password ‘123456789’
• Once connected, open the Motor+ app. You should now
be able to use your phone as a viewfinder for the camera, as well as reviewing and managing footage.
For more details on App functions please see the section labeled
“App”.
Wifi Set Up (for Android and
iPhone)
14
English
Software
Opening Screen
Opening Screen Screen
1
Camera media
2
Media Stored on
Computer
1 2
15
English
Media Manager
Media Manager Screen
1
Photo
2
Video
3
Event Video
4
Media Stored on
Computer
5
Media
6
Camera Settings
7
General Settings
3
2 4
5
1
76
16
English
Media Player
Media Player Screen
1
Speed
2
Compass
3
Player Controls
4
GPS position
5
Share to Social Media
6
Copy Video from
Camera
4
5
6
1
2
3
17
English
General Settings
General Settings Screen
1
Language Selection
2
Directory to Save
Videos to Computer
1
2
18
English
Camera Settings
Camera Settings Screen
1
Mute/Volume
2
Event Recording
Sensitivity
3
Video Resolution
Settings
4
Voice Guidance Settings
5
Video Duration Settings
1
2
3
4
5
19
English
App
Streaming Screen
Streaming Screen
1
GPS / Power / WiFi
Indicators
2
Menu
3
Resolution Settings
4
Capacity Indicators
5
Streaming Video
Feed
6
Photo Shutter Button
6
2
1
5
3 4
20
English
Menu Screen
Menu Screen
1
Live Feed
2
Video Stored on
Camera
3
Video Stored on
Phone
4
Settings
4
1
2
3
21
English
App Settings
App Settings Screen
1
Sign in to Social
Media
2
Rename Saved Files
1
2
22
English
Car DV Settings
Car DV Settings Screen
1
Mute
2
Volume
3
Event Recording
Sensitivity
4
Voice Guidance
Settings
5
Video Resolution
Settings
6
Recording Duration
Settings
1
2
3
4
5
6
23
English
General Settings
General Settings Screen
1
Set Date / Time
2
Wipe SD Card
3
Restore Factory Settings
4
Device Information
1
2
3
4
24
English
LED Indication
“RED” Status LED ON R30 is under Normal Looping
Recording.
“RED” Status LED
Flashes continuously
Counting down and the R30 is going
to turn o due to the power source is
removed.
“PURPLE” Status LED ON R30 is under Event Protection
Recording.
“BLUE“ Status LED ON R30 is connecting to PC through USB
cable.
Blue & Red status LED
alternating flash
1. No memory card is installed
2. Memory card is less than 8GB
3. Card error
“ORANGE” GPS LED ON GPS signal is received.
“ORANGE” GPS LED
Flashes
No GPS signal or GPS signal is weak.
“GREEN” WiFi LED ON WiFi is initializing.
“GREEN” WiFi LED
Flashes slowly
WiFi is ready for connection or
enabled.
“GREEN” WiFi LED
Flashes rapidly
Data is transferring in WiFi mode.
25
English
Specifications
Lens 125° Wide Angle Lens
Still Image Resolution
on Recording
3MP on 1296p
2MP on 1080p
1MP on 720p
Video Resolution 1296P: 2304x1296 P30
1080P: 1920x1080 P30
720P: 1280x720 P30
Video Format MPEG4 (H.264) .MOV File
Photo Format JPG
GPS Sensor Yes
G Sensor Yes
Wi-Fi Yes
USB Port Micro USB
Power DC in
Microphone Yes
Speaker Yes
Language English
Voice Language English, Mandarin
Battery 180mAh
Operation Temperature -20 to 60 degree
Storage Temperature -40 to 80 degree
Dimension (L x W x H) 63 x 43 x 21 mm
Weight 66.3g
26
English
Frequently Asked Questions
Q. The image is blurry
A. Try repositioning the R30. For best results, try to
aim the camera through a section of the windshield that
is not overly curved or angled as this can cause a
blurring eect with footage.
Q. I can’t connect to the cameras WiFi.
A. Try resetting the WiFi by turning it o using the WiFi
button and then turning it back on by holding the WiFi
button until the camera until the WiFi LED indicator
shows green and the camera says “WiFi start up”, the
connection should now be available in your phone’s WiFi
settings.
Q. I can’t find the App in the App store
A. Go to www.kaiserbaas.com/R30 using your mobile
phone for a direct link to the app store in your country.
Q. My device will not record
A. Please ensure that you have power connected to the
camera using the supplied DC power cable and that you
have a SD card inserted that is Cat 6 or above.
27
English
Contact Us
Having trouble setting your R30 Car DVR up?
Please contact us. No question too big or small and we are
more than happy to help.
Please visit:
www.kaiserbaas.com/support
Or email:
helpdesk@kaiserbaas.com
For further information please visit:
www.kaiserbaas.com
Tech support:
e: helpdesk@kaiserbaas.com
w: www.kaiserbaas.com/support
p: Australia 1300 302 306
p: New Zealand 0800 302 306
(business hours, AEST)
28
English
Loading...