17
English
The HD Video Converter LED lights will illuminate dierent colours/ways to indicate
functions.
LED Status Chart
GREEN: flashing No USB storage device connected
or: Booting still in progress
or: HDD not supported - if flashing for extended amount of time
or: Cable not connected properly
or: USB storage device is full
GREEN: constant Ready for plugging in USB storage device
or: HD Video Converter and setup is ready for recording
RED: constant HD Video Converter is recording
RED: flashing New recorded file is saving - wait until the LED turns GREEN before
proceeding to next function
Note: DO NOT remove storage device while HD Video Converter is saving
RED and GREEN: flashing Content is HDCP-protected (refer to pg 7) and cannot be recorded
720p/1080p status indicator Indicates which resolution has been selected
HDMI/analogue indicator Indicates which input signal has been selected
HDMI LED: on An HDMI cable has been plugged in and the input video signal source
is HDMI
HDMI LED: flashing Indicates a possible unstable/loose connection of HDMI cable or cable
needs a few seconds to be stable
Analogue LED: on Indicates that the input video signal may be YPbPr or composite
Analogue LED: flashing Indicates a possible unstable/loose connection of YPbPr/composite
cable or cable needs a few seconds to connect