Kaiser Baas BT-220 User Manual

Kaiser Baas BT-220 User Guide

Introduction

Congratulations on the purchase of your Kaiser Baas Keyboard BT-220. This user
guide will help you to pair your BT-220 to your computer or Bluetooth enabled
device.

Features

Built-in touch pad

Built-in Lithium-ion battery

Built-in smart power-saving technology

Power on/off switch to maximise battery life

Function & Num Lock keys available

Operating distance up to10 metres

Includes Bluetooth USB mini receiver

Compatible with Windows XP, Vista, Windows 7, Mac, iPhone*, iPad/iPad 2, iPod
Touch*, Android*, Nokia Symbian S60 and PlayStation

*Compatible with iPhone 3/iPhone 3GS/iPhone 4/iPod Touch (3

rd

generation)/iPod

Touch (4

th

generation)/iPad/iPad 2

*Android phone or tablet must support HID devices

Hardware Specifications

Keys: 78 keys (US English), 4 multimedia keys
Size: 28 (L) x 11.2 (W) x 1.7 (H) cm
Weight: 280g
Touch pad resolution: High resolution with multi-touch support
Transmission distance: Up to 10 metres
Battery: 2 AAA batteries
Interface: Includes Bluetooth USB mini receiver

Connecting the BT-220 to Windows

If your computer is not Bluetooth enabled, please install the provided Bluetooth USB
receiver to connect to Bluetooth devices ---

1. Connect the Bluetooth receiver to a spare USB port on your computer.

2. Windows will detect the Bluetooth receiver and the necessary drivers will be
automatically installed.

The Bluetooth receiver is compatible with computers running Windows XP, Vista and
Windows 7 only.

Insert the provided AAA batteries into the BT-220 and slide the power switch
underneath the keyboard to the on position.

To pair the keyboard, press and hold the ID button until you see the green LED
continually flashing.

To add a Bluetooth device, click ‘Start’ > ‘Control Panel’ > ‘Hardware and Sound’ >
‘Add a Bluetooth device’.

Windows will detect the keyboard as a ‘Bluetooth Keyboard’.

Follow the on-screen instructions to complete connection.

The green LED will stop flashing when connected.

Connecting the BT-220 to your Mac

Insert the provided AAA batteries into the BT-220 and slide the power switch
underneath the keyboard to the on position.

To pair the BT-220, press and hold the ID button until you see the green LED
continually flashing.

Make sure that Bluetooth on your Mac is turned on. Open ‘System Preferences’
then select ‘Bluetooth’ from the ‘View’ menu. Select the ‘On’ checkbox.

To set up the keyboard, click ‘Set Up New Device’ and follow the on-screen
instructions.

The green LED will stop flashing when connected.