
DIRECTIONS FOR USE:
INTELLIEAR®/INTELLIEAR® PLUS

1.
IMPORTANT:
Before using the IntelliEAR® PLUS for the
rst time, you must charge the internal
rechargeable battery for at least twelve
hours. Please refer to Page 15. of this guide,
regarding the Rechargeable Battery, for
assistance.
© 2015 KAGAN UNLIMITED
IntelliEAR® instructions and its related logo are
registered trademarks of KAGAN UNLIMITED
Chicago, Illinois, 60625
All Rights Reserved.

2.
Welcome to the Sound Revolution!
You are now the owner of a IntelliEAR®, the
revolutionary sound amplication system that is
lightweight, compact, and discreet.
When used correctly, the IntelliEAR® promotes
a happier, healthier lifestyle by allowing you to
hear while maintaining your normal routine and
activities.
Please read the following instructions through
carefully before using. Thank you for purchasing
the IntelliEAR®.
www.intelliear.com

3.
IntelliEAR
®
5. IntelliEAR® (button cell model)
6. Product Specications
6. Contents of Package
7. Directions for Use
7, 8. Battery Installation
9,10. Ear Tip Installation
11. Switch ON, Volume Controls
11. How to Wear/Adjust Ear Amplier
FOR BOTH MODELS:
18-20. Frequent Questions
21. Ordering Replacement Parts
22. Refund and Return Policy

IntelliEAR® PLUS
12. IntelliEAR® PLUS (lithium battery)
13. Product Specications
13. Contents of Package
14. Directions for Use
14. On/Off
15. Rechargeable Battery
16. Product Diagram
17. Volume Control
17. How to Wear/Adjust Ear Amplier
Additional information at:
www.intelliear.com
4.

With replaceable button-cell batteries.
5.

INTELLIEAR® SPECIFICATIONS
• Input voltage: 3.0V (AG13 button cell battery 1.5V x 2
• Operating Current: 10mA
• Speaker Impedance: 200Ohm
• Gain: 50dB+/-6dB
• Output Power: 3mW
• Amplier frequency response: 200-5000Hz
• Operation Time: 12 hours continuously
(when using AG13 batteries)
CONTENTS OF PACKAGE
(1) IntelliEAR
®
, button-cell model
(3) Soft Ear Piece Covers
(2) AG13 batteries in unit
(6) AG13 replacement batteries
6.

7.
Directions for Use
INSTALL BATTERY
Step 1:
Negative (-)
Positive (+)
Open the battery cover and
install the two AG13 batteries.
Please note the polarities
indicated: