KAB Enterprise TR 016 User Manual

RC-018 + TR-016 Indoor Wireless Remote Co ntrol

SET UP

1. Plug the rece iv er into a s tandard 125-volt AC electrical outlet.

2. Conf ir m that the electr ic al specif ic ations of an item you wish to use with this
produc t do not ex c eed those s pecified in the "Electrical Ratings" sect io n. Plug
the item into an outlet of t he r eceiver.

3. Remove the plastic battery tab from the battery compartment in the back of the
rem ote control to activate t he DC 12V Type A23 pre-installed batter y.

ELECTRICAL RATINGS

Range Up to 50f t.
125Vac 60Hz 15 A General P ur pose
125Vac 60Hz 15 A Resistive
1,000 W Tungst en
500 VA E lectronic Balla s t
120Vac 60Hz 8.3A Ballast.
1/2 HP

TO U SE

1. To set up the receiver (outlet) with co nnecting dev ic e.

2. Removes the plastic battery tab from the battery compartment in the back of the
remote control to ac tive the DC 12V Type A23 pre-installed battery.

3. Pre s s "Clear" ON butto n on the transm itter to tur n the "Clear" receiver ON and
press OFF button o n the t ra ns m itte r to turn the rec eiver OFF.

4. Pre s s "Multi" ON button on t he transmit ter to turn t he "Multi" receiver ON and
press OFF button o n the t ra ns m itte r to turn the rec eiver OFF.

5. Pre s s "Both" ON button on t he transmitter to tur n the "Clear" and "Multi" receiver
ON a nd press OFF butt on on the transmitter to turn t he r eceiver OFF.

Battery Handling and Usage

WARNING: Keep batte r ies away f ro m c hildr en and pets.

• Fo llow the battery manuf acturer's safe ty and usa ge ins tructions.

• Insert the battery observing the proper polarity (+/-) as indicated inside the Ba ttery

Compartment.
CAUTION: Failure to properly align the battery po lar ity can cause per so nal injury
and/or property damage.