型号：T-4B-CB-9
Model： T-4B-CB-9
遥控器 PBCA 装配到外壳里面，盖好后盖。
Fit the remote PCBA into the shell, place the back cover
点击 APP“生成”选项，遥控器放置在生成器的感应区域，点击“无线生成”选
项。
Click APP” Generate” option, set the remote onto the induction area of the generator,
click “generate (wireless)” option
按遥控器任意键，100%后遥控器生成。
Press any button of the remote, when “creating 100%” comes out, the remote is
generated.
电气参数 Electric parameter：
工作电压 Operating voltage：3.3V
输入功率 Input power：0.1W
输入电流 Input current：30mA
发射频率 transmitting frequency：315MHZ
This device complies with Par t 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference receive d, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply wit h the limits for a Class B digital
device, pursuant to Part 15 of the F CC Rules. These limits are designed to pr ovide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does caus e
harmful interference to radio or television reception, wh ich can be determined by turning the
equipment off and on, the user is encour aged to try to correct the inter ference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Loading...