RLS2 QUICK REFERENCE GUIDE
Menu / Customizable Settings
• Press and hold DIM / MENU button for 3 seconds. The voice will
announce, “Menu,” and the display will read *MENU*.
• Press and release DIM / MENU button to scroll through the
preferences until you reach the option to be changed.
• To change setting, press and release or button. Both
the display and voice will announce the change.
• Press and release DIM / MENU button to continue scrolling to
another preference.
^
^
1 Voice Type Female
Choose male or female voice for audio alerts.
2 Audible Voice On For all initial audio alerts: “Voice On” uses
voice; “Voice Off” uses tones only.
3 Wake-Up Wake- “Wake-Up Long” is a standard 5-second
Up sequence. “Wake-Up Short” uses an abbre-
Long viated sequence.
4 Speed Displayed On “Speed On” displays current speed in
mph / kph when driving over 5 mph / kph.
“Speed Off” turns off this display.
5 Compass Heading On Displays current compass heading when
driving over 5 mph / kph.
6 Traffic Sensor Off Enables filtration of K-Band radar signals
Filter from traffic flow sensors.
7 mph / kph mph Choose mph or kph.
8 Automute Off Automatically reduces volume by 50% after
5 seconds.
9 X-Band On Enables the detection of X-Band radar.
10 K-Band On Enables the detection of K-Band radar.
11 Ka-Band On Enables the detection of Ka-Band radar.
12 Laser On Enables the detection of laser.
13 Mute Locations N/A Clears all stored muted locations. See Pg. 12
14 Alert Locations N/A Clears all stored alert locations. See Pg. 13
15 Factory Reset RESET Original factory default for all settings.
Default
Setting
Menu Options
(in order displayed)
Description
Frequently Used Features & Functions
Mute Audio Before or During Alert (Owner’s Manual pgs.13-14)
30-second Mute Press and release MUTE button.
5-minute Mute Press and hold MUTE button for 3 seconds.
• Press and release QUIET RIDE button to activate the Quiet
Ride menu. Voice will announce the current setting.
• Use
^
or buttons to adjust the speed settings on Quiet
Ride. Any selected speed setting indicates Quiet Ride is on.
• When you have made your desired Quiet Ride speed selec-
tion, stop scrolling and voice will announce,
”Quiet Ride Set.”
Questions? Call 800.323.5608
Learn more at K40.com
© K40 Electronics
44821-2 1/17
RLS2 QUICK REFERENCE GUIDE
Mute location Press and release MARK button when
you want to mark a location for mute.
Remove a muted Press and release MARK button in
location muted location. Voice confirms removal.
Mark to Mute* (Owner’s Manual pg. 12)
To remove all marked MUTE and ALERT locations, see
pgs. 12-13 in Owner’s Manual.
Activating / Adjusting Quiet Ride
(Owner’s Manual pg. 9)
^
Mark location Press and hold MARK button when you
want to mark a location for alert.
Remove a marked Press and hold MARK button in
location marked location. Voice confirms removal.
Mark to Alert (Owner’s Manual pg. 13)
*A radar or laser signal must be present in order to mark a location for mute.
Loading...