K2 Mounts K2-A3-S User Manual
k2mounts.com
QUALITY MOUNTING SOLUTIONS
STEP-BY-STEP INSTALLATION MANUAL
K2-A3-S ARTICULATING MOUNT
K2-A3-S Installation Instructions & Manual
STOP
Table of Contents
Before You Begin 1
What You Will Need 1
Package Contents 2
Installation 3
Wood Stud Wall Installation 3
Concrete or Concrete Block Wall Installation 4
Specications 6
K2Mounts Warranty 7
Before You Begin
Read this entire manual! Do not attempt to install this product if you do not understand
the instructions or if there are missing or defective parts. If you are in doubt, contact a
qualied contractor to install the mounting bracket. Improper installation may result in
damage to the screen, property, or personal injury.
What You Will Need
You will need these tools to install your wall mount bracket:
• Measuring tape
• Level
• Pencil or pen
• Electric drill
• Hammer
• Ratchet with 7/16 inch socket
• Phillips screwdriver
• Stud nder (for wood stud wall)
• 3/16 inch Drill bit (for wood stud wall)
• Masonry drill bit (for concrete wall)
• Concrete screw anchors (for concrete wall)
1 www.k2mounts.com
Package Contents
Verify that you have received all of the parts listed below:
Articulating Arm/Wall Mounting Plate Screen Plate
Wall Hardware Screen Hardware
6 - 3” X 7/16” lag bolts
6 - 3/4” washers
If any parts are missing or damaged, contact K2Mounts at support@k2mounts.com for a
replacement. K2Mounts is not liable for damage or injury caused by incorrect mounting,
incorrect assembly, or incorrect usage.
Hex wrench
6 - 3/8” x 1/2” black spacer
6 - 3/8” x 3/4” black spacer
6 - 3/4” washers
6 - 7/16” washers
6 - M6 x 30mm screws
6 - M6 x 15mm screws
6 - M5 x 30mm screws
6 - M5 x 15mm screws
6 - M4 x 30mm screws
6 - M4 x 12mm screws
2 www.k2mounts.com
Loading...