How it Works
Küppersbusch
Loading...
IGV 655.1
Instruction Book
19 pgs580.44 Kb0

Küppersbusch IGV 655.1 Instruction Book

LIBRETTO ISTRUZIONI
Manual de instrucciones página 20 Instruction book page 38
E
GB
IGV 655.1
38
Setting the water softener 41 Filling with salt 42 Rinse aid 43
Cleaning the filters 50 Prolonged periods of non-operation 50 Frost precautions 50 Moving the machine 50
Installation instructions 53 Building-in 53 Levelling 53 Fixing to the adjacent units 53 Water supply connections 53 Water inlet hose with safety valve 53 Water outlet hose connection 54 Electrical connection 54
Hints for test centres 55
Contents
Dimensions Width 59.6 cm
Height 81.8 - 87.8 cm Max depth 55.5 cm
Electrical connection: Information on the electrical connection is given on the rating plate on the Voltage inner edge of the dishwasher’s door on the right. Overall power Fuse
Water supply pressure Minimum 50 kPa (0.5 bar)
Maximum 800 kPa (8 bar)
Capacity 12 place settings
Technical specifications
This appliance complies with the following E.E.C. Directives:
- 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
39
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.
This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the appliance.
Installation
● Check your dishwasher for any transport damage. Never
connect a damaged machine. If your dishwasher is damaged, you should contact your supplier.
● For safety reasons it is dangerous to alter the specifications
or attempt to modify this product in any way.
● Any electrical and plumbing work required to install this
appliance should be carried out by a qualified and competent person.
● Care must be taken to ensure that the appliance does not
stand on the electrical supply cable.
● The sides of the dishwasher must never be drilled to
prevent damage to hydraulic components.
Child safety
● This appliance is designed to be operated by adults.
● Children should not be allowed to tamper with the controls
or play with the product.
● Packaging parts may be dangerous for children, who could
even be suffocated! You should therefore keep all packaging well away from children.
● The water in your dishwasher is not for drinking. Detergent
residues may still be present in your machine. Keep children well away from your dishwasher when the door is open.
● Keep all detergents in a safe place out of children's reach.
Your dishwasher in day-to-day use
● Items that are contaminated by petrol, paint, steel or iron
debris, corrosive, acidic or alkaline chemicals must not be washed in this dishwasher.
● Under no circumstances should you open the door whilst
the appliance is in operation, especially during the washing phase, hot water may escape. However, if the door is opened, a safety device ensures that the machine stops.
● Only use products (detergent, salt and rinse aid) specifically
designed for use in dishwashers.
● Long bladed knives stored in an upright position are a
potential hazard.
● Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
● When finishing loading or unloading close the door, as an
open door can be a hazard.
● Do not sit or stand on the open door.
● Isolate the appliance from the power supply and turn off the
water supply after use.
● This product should be serviced by an authorised service
engineer, and only genuine spare parts should be used.
● Under no circumstances should you attempt to repair the
machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local consumer services department. Always insist on genuine spare parts.
Disposal
Dispose of the dishwasher packaging material correctly. All packaging materials can be recycled.
Plastic parts are marked with standard international abbreviations:
>PE< for polyethylene, e.g. sheet wrapping material. >PS< for polystyrene, e.g. padding material (always CFC-
free).
>POM< for polyoxymethylene, e.g. plastic clips. Cardboard packaging is manufactured from recycled paper
and should be deposited in the waste paper collection for recycling.
As and when you cease to use your dishwasher and withdraw it from service, your should render it unserviceable before having it disposed of.
Warning! Children at play could lock themselves in your dishwasher or otherwise endanger their lives. Therefore cut off the power supply cable and make the door closing device unusable to prevent children from being trapped inside.
For the disposing of the appliance please take it to a recycling centre or to your dealer who will, for a small contribution to the costs, dispose it for you.
Economical and ecological dishwashing
● Ensure that the water softener is correctly adjusted.
● Do not pre-wash under running water.
● Select the wash programme to suit the nature and degree of
the soiling on the dishes.
● Do not use more detergent, special salt and rinse aid than is
recommended in these operating instructions and by the manufacturer of the respective product.
Safety instructions
The control panel
40
1. Upper basket stop
2. Water hardness switch
3. Salt container
4. Detergent dispenser (type A/ type B)
5. Control panel
6. Rating plate
7. Rinse aid dispenser (type A/ type B)
8. Filters
9. Lower spray arm
10. Upper spray arm
11. Upper basket
Description of the appliance
IN143
Function push buttons: in addition to the dishwashing
programme selection, the following functions can also be set with the help of these buttons: water softener setting, deactivation/activation of the inflow of rinse aid, deactivation/activation of the audible signals.
"Delay start" push button: this option allows the start
of the programme to be delayed by 3, 6 or 9 hours.
Indicator lights: have the following meanings:
salt refilling indicator light, illuminates when the salt
has run out rinse aid refilling indicator light, illuminates when
the rinse aid has run out end of programme: illuminates when the washing
programme has ended it also has added functions of visual signalling as:
- something not working with the machine
- deactivation/reactivation of the inflow of rinse aid and of the audible signals
- the set of the water softener
41
Audible signals
Audible signals have been introduced to help indicate which operations the dishwasher is performing:
"End of programme" "Set of the water softener" "Something not working with the machine"
To deactivate the audible signals
(The dishwasher must be switched off)
1. Press the On/Off push button, all indicator lights of the programme push buttons will illuminate (setting mode).
2. Press simultaneously function push buttons 2 and 3, the indicator lights of the function push buttons 1, 2 and 3 start flashing.
3. Press the function push button 3, the indicator lights of function push buttons 1 and 2 turn off while the indicator light of the push button 3 goes on flashing, at the same time the "end of programme" indicator light illuminates indicating that the audible signals are active.
4. To deactivate the audible signals, press again the function push button 3, the "end of programme" indicator light turns off, indicating that the audible signals have been deactivated.
5. To memorise the operation, switch off the dishwasher by pressing the On/Off push button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.
Prior to using for the first time
Before using your dishwasher for the first time:
1. Ensure that the electrical and water connections comply with the installation instructions
2. Remove all packaging from inside the appliance
3. Set the water softener
4. Pour 1 litre of water inside the salt container and then fill
with salt
5. Fill the rinse aid dispenser
6. Run a "Rinse and Hold" programme
Setting the water softener
The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.
The higher the content of these salts, the harder your water is. Water hardness is measured in equivalent scales, German
degrees, French degrees and PPM (parts per Million). The softener should be adjusted according to the hardness of
the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.
The water softener must be set in both ways: manually, using the water hardness switch and electronically, using the function push buttons on the control panel.
If your water is level 1 it is already soft and therefore there is no need to use salt.
Setting manually
The dishwasher is factory set at position 2.
1. Open the dishwasher door.
2. Remove the lower basket from the dishwasher.
3. Turn the water hardness switch to position 1 or 2 (see
table).
4. Replace the lower basket.
°dH
(german degrees)
°TH
(french degrees)
PPM
(parts per million)
manually electronically
51 - 70 43 - 50 37 - 42 29 - 36 23 - 28 19 - 22 15 - 18 11 - 14
4 - 10
< 4
901 - 1250
751- 900 641 - 750 501 - 640 391 - 500 321 - 390 251 - 320 181 - 250
70 - 180
< 70
91 - 125
76 - 90 65 - 75 51 - 64 40 - 50 33 - 39 26 - 32 19 - 25
7 - 18
< 7
2 2 2 2 2 2 1 1 1 1
level 10
level 9 level 8 level 7 level 6 level 5 level 4 level 3 level 2 level 1
10
9 8 7 6 5 4 3 2 1
yes yes yes yes yes yes yes yes yes
no
Water hardness
Adjusting the water hardness
setting
Number of flashes
and of audible
signals
Use
of salt
AA07
42
Setting electronically
(The dishwasher must be switched off)
The dishwasher is factory set at level 5. If it’s necessary to set a new level, proceed as follows.
1. Press the On/Off push button, all indicator lights of the programme push buttons will illuminate (setting mode).
2. Press simultaneously function push buttons 2 and 3, the indicator lights of the function push buttons 1, 2 and 3 start flashing.
3. Press the function push button 1, the indicator lights of function push buttons 2 and 3 turn off while the indicator light of the push button 1 goes on flashing, at the same time the "end of programme" indicator light illuminates, along with a sequence of audible signals.
The current level is indicated by the number of flashes and audible signals.
Example: 5 flashes + 5 audible signals = level 5
4. To change the level, press push button 1. Each time the
push button is pressed the level changes.
Examples:
if the current level is 5, by pressing push button 1 once, level 6 is selected. if the current level is 10, by pressing push button 1 once, level 1 is selected.
5. To memorise the operation, switch off the dishwasher by pressing the On/Off push button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.
Filling with salt
Special salt can be added in one of two ways:
● If you are using dishwasher detergent that already contains
salt, the detergent including the salt is placed in the detergent compartment.
- In this case the water softener must manually be set to 1 and electronically to 1 to ensure that the special salt is taken from the detergent container only.
● If you are using dishwasher detergent and salt separately,
the special salt is to be put into the salt container.
- In this case the water softener must manually be set to 1 or 2 and electronically between 1 and 10 (depending on the water hardness in your area) to ensure that the special salt is taken from the salt container only.
Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the washing programmes (not the Rinse and Hold programme). This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion.
To fill:
1. Open the door, remove the lower basket and unscrew the
cap of the salt container by turning it anticlockwise.
2. Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time).
3. Using the funnel provided,
pour in the salt until the container is full.
4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.
5. Screw on the cap tightly turning it clockwise until it stops with a click.
The salt container will require topping up periodically. You are reminded of this by the salt indicator light on the control panel which comes on when the salt has finished.
The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.
Do not worry if water over flows from the unit when filling with salt, this is quite normal.
SALE
ZOUT
SALT
SALZ
SEL
SR14
Loading...
+ 13 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use