jWin PTP215 Owner's Manual

FSK/DTMF Type II Call Waiting

Caller ID Big-button Speaker Phone

Instruction Manual

PTP215

Telephone V10M10_IM_EN_06212010

- 1 -

www.polaroid.com

Telephone V10M10_IM_EN_06212010

INTRODUCTION

Thank you for purchasing PTP215. Please read and follow the
instructions in this manual carefully to ensure your product
operates correctly.

General Features

• Supports FSK/DTMF system

• Type II call waiting caller ID stores ID information for up to 90

calls

• Speaker phone system

• 14-digit liquid crystal display (LCD)

• 3 one-touch speed dial buttons

• 10 two-touch speed dial memories

• Mute function

• Ringer / receiver / speaker phone volume controls

• Tone / pulse mode selection switch

• Supports 4 languages: English, French, Spanish, Italian

• Redial and flash functions

• Incoming call indication

• Flashing ringer light

• Desk / wall mountable

What’s Included

• Warranty Card

• Handset cord

• Line cord

- 2 -

www.polaroid.com

Telephone V10M10_IM_EN_06212010

GETTING STARTED

Location of Controls

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

1. LCD 2. DEL

3. AUTO 4. M1, M2, M3

5. STORE 6. Handset

7. MUTE 8. VOL

9. FLASH 10. ▲

11. ▼ 12. DIAL

13. Keypad 14. REDIAL/P

15. SPEAKER

- 3 -

www.polaroid.com

Telephone V10M10_IM_EN_06212010

GETTING STARTED

Installation

1. Plug one end of coiled cord to the jack of handset and the
other end to the jack of the base set.

2. Plug one end of flat cord to line jack of the phone and the
other end to the wall jack

3. Open the battery compartment cover, install 3pcs AA
batteries (not Included)

Notes: Batteries are not included with the unit. When inserting
or replacing batteries, pick up the handset first, then replace the
batteries, otherwise, all settings and memory will be lost.

Description of the Display

• Three line LCD displaying, upper line displays the basic
information, middle line displays the number of in-coming
call and bottom line displays the name of caller

“LOW” appears when the battery power is in low

status

o “NEW” appears when there are new incoming

calls

o “CALL #” means the total amount of incoming

calls

o “XX:XX AM/PM XX/XX” means Hour:Minute

Morning/Afternoon Date/Month respectively

• If the time and date of incoming call is different from the
Telephone Company, the telephone will adjust the time
and date automatically according to Telecom Provider
when receiving calls.

• If there is no operation or no incoming calls more than 20
seconds, LCD only displays time and date, total amount
of received calls and amount of new incoming calls

• This telephone can store up to 90 incoming calls. If there
is a new call after the 90
erased automatically and the new call will be stored.

th

call, the oldest one will be

- 4 -

www.polaroid.com