Jwin JX-M133 User Manual

AM/FM/All Hazards Weather Alert Receiver

with Dual Alarm Clock

JX-M133

INSTRUCTION MANUAL

Please read this manual carefully before operating

and save it for future reference.

Have a question? Please visit www.jWIN.com

AM/FM/Weather band Radio w/ Dual Alarm Clock V10M10_IM_EN_06022009

www.jWIN.com

AM/FM/Weather band Radio w/ Dual Alarm Clock V10M10_IM_EN_06022009

INTRODUCTION

Thank you for choosing the JX-M133 AM/FM/WB band radio. Before operating the unit, please read these instructions thoroughly and retain them for future reference.

The JX-M133 is designed to receive National Weather Service (NWS) broadcasts, by the Department of Commerce’s National Oceanic and Aerospace Administration (NOAA) which provides information about weather conditions, forecasts and hazard information 24 hours a day as a public service.

JX-M133 receives all seven NOAA channels; it has an automatic alert system; in the event of a special warning broadcast, the receiver will automatically activate along with a loud tone; a flashing LED indicator; and an “alert” message on the LCD.

This unit also has an “S.A.M.E Digital Weather/Hazard Alert” feature, providing you with constant monitoring of your localized NWS broadcast. It allows you to receive only messages for the areas concerning you.

For up-to-date information on NOAA and weather frequencies used in your area, check the NOAA National Weather Service website at: www.nws.noaa.gov/nwr.

To get weather band channel and S.A.M.E code for your area,

call 1-888-697-7263, or visit

www.nws.noaa.gov/nwr/indexnw.htm

AM / FM / Weather Band Radio

• All hazards weather alert system

• Programmable presets for 30 radio stations

• SAME decode and alert message display

• Store up to 10 alert messages

• LED warning indicator

• Dual alarm clock with date display

• Wake to AM/FM radio or buzzer

What’s included

• All Hazards Weather Receiver with AM/FM/WB Radio

• AC Adapter

• QSG (Quick Start Guide)

www.jWIN.com

AM/FM/Weather band Radio w/ Dual Alarm Clock V10M10_IM_EN_06022009

GETTING STARTED

Location of Controls on the Main Unit

2 3

4 5 6 7

1. Telescoping antenna

2. EXT. ALERT jack

3. DC jack

4. WEATHER/HAZZARD/ ON/OFF button

5. POWER

button

6. ALERT ON/OFF button

7. RADIO AM/FM button

8. VOLUME -/+ button

9. OFF/AL1/AL2/AL1+2

Selector Switch

10. HEADPHONE jack

11. ANT. jack

MEMORY

12. Speaker

13. SNOOZE/DIMMER

button

14. MENU/MEMORY button

15. SELECT button

< > buttons

16.

14 15

www.jWIN.com

GETTING STARTED

Location of Indications on the LCD Screen

1 2 3 4 5 6

7 8 9 10

1. PM/AM/FM indicator 6. Selectable alert indicator

2. ALARM 1 status indicator 7. NOAA indicator

3. CLOCK/FREQUENCY

display

4. ALERT mode display 9. S.A.M.E. county indicator

5. ALARM 2 status indicator 10. Low battery indicator

8. Setting/Hazard/Info/Date

display

AM/FM/Weather band Radio w/ Dual Alarm Clock V10M10_IM_EN_06022009

GETTING STARTED

Using an AC Adapter to Supply the Power to the Unit

Before connecting the AC adapter (included), make sure that the input voltage of the AC adapter corresponds to your local AC outlet voltage. It is recommended to use an AC adapter, which outputs DC 12V / 250mA , for this unit.

1. Connect the AC adapter (included) plug to the DC Jack of the unit.

2. Connect the other end of the AC adapter to the wall outlet.

Important Note: To avoid the electric shock or fire, do not use the AC adapter where lots of water particles exist in the air. Use the AC adapter with caution.

Installing the backup batteries

This unit operates on 4 X “AA” batteries (not included) for backup. Please note that batteries are important because they provide emergency power for the receiver in if the AC power fails.

1. Open the Battery Compartment.

2. Insert 4 "AA" size batteries into the Battery Compartment, making sure that the batteries are installed with the proper polarity (+/-) are maintained.

Important Note: Please protect the environment. Dispose of old batteries properly according to local regulations.

Notes on battery use:

• To save battery power, please always use AC adaptor for receiver power supply.

• Load new batteries with their polarities (+/-) aligned correctly.

• Do not apply heat to batteries, or internal short circuit may occur.

• If this unit is not to be used for a long period of time, remove all batteries and

store them in a cool and dry place.

• Remove spent batteries immediately and dispose of them.

• Do not use old and new batteries together. Also never use an alkaline battery

with a magnesium battery.

• Backup battery time is 54 hours

www.jWIN.com

AM/FM/Weather band Radio w/ Dual Alarm Clock V10M10_IM_EN_06022009

OPERATIONAL INSTRUCTIONS

Basic Operation

1. Extend the antenna to its full length.

2. Program the Weather Channel for Your Desired Area

a) Turn the radio off with the b) Press the c) Press the

displays on the LCD screen. d) Press the e) Press the

weather channels until you hear the strongest weather broadcast. f) Press the

3. Press the radio. You are now able to receive weather alerts for your area and surrounding areas.

WEATHER/HAZARD ON/OFF button to listen to the weather

MENU button. UP " " or DOWN " " button until “WEATHER—CH1”

SELECT button. UP " " or DOWN " " button to manually scroll through the

SELECT button to save this channel.

POWER button on top of the radio.

Seven channel weather band (MHz)

CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7

162.400 162.425 162.450 162.475 162.500 162.525 162.550

Setting the Time

1. Turn off the radio by pressing POWER button on top of the radio.

2. Press the

3. Press the

4. Press the

5. Press the

Note: The AM / PM setting cannot be manually changed; it changes

automatically as you scroll through the hours.

MENU button. UP " " or DOWN “ " button until “SET UP—TIME” is displayed. SELECT button, hour setting will begin to flash. UP " " or DOWN " " buttons to adjust the hour setting.

6. Press the

7. Press the

8. Press the

9. Press the

RIGHT “>” arrow to adjust minutes and save your hour setting. UP " " or DOWN " " buttons to adjust the minute setting. SELECT button to store the time setting. MENU button to return to the main menu.

www.jWIN.com

AM/FM/Weather band Radio w/ Dual Alarm Clock V10M10_IM_EN_06022009

OPERATIONAL INSTRUCTIONS

Setting the Date

1. Turn off the radio by pressing POWER button on top of the radio.

2. Press the

3. Press the

4. Press the

5. Press the

MENU button. UP " " or DOWN “ " button until “SET UP—DATE” is displayed. SELECT button. UP " " or DOWN " " buttons to adjust the month.

6. Press the

7. Press the

8. Press the

9. Press the

10. Press the

11. Press the

RIGHT “>” button to select the day. UP " " or DOWN " " buttons to adjust the day. RIGHT “>” button to select the year. UP " " or DOWN " " buttons to adjust the year. SELECT button to store MONTH/DAY/YEAR. MENU button to return to the main menu.

Setting the ALARM 1 Time

1. Turn off the radio by pressing POWER button on top of the radio.

2. Press the

3. Press the

displayed.

4. Press the

5. Press the

Note: the AM/ PM setting cannot be manually changed; it changes

automatically as you scroll through the hours.

6. Press the

7. Press the

8. Press the

mode setting.

MENU button. UP " " or DOWN “ " button until “SET UP—ALARM 1” is

SELECT button. The alarm hour setting will begin to flash. UP " " or DOWN " " buttons to adjust the alarm hour setting.

RIGHT “>” button to choose setting alarm minutes. UP " " or DOWN " " buttons to adjust the alarm minute setting. SELECT button to confirm the alarm time setting and enter to wake

9. Press the

(Radio) wake mode, press the

LEFT “<” or RIGHT “>” buttons to select “ ” (Buzz) or “ ”

SELECT button to confirm.

Setting the ALARM 2 Time

1. Turn off the radio by pressing POWER button on top of the radio.

2. Press the

3. Press the

displayed.

4. Follow the instructions for “Setting the ALARM 1 Time” above.

MENU button. UP " " or DOWN “ " button until “SET UP—ALARM 2” is

www.jWIN.com

+ 16 hidden pages