Portable Audio CD player
Instruction Manual
JX-CD335
Please read this manual carefully before operating and save it for future reference.
Have a question? Please visit http://www.jWIN.com
Portable Audio CD Player V30M30_IM_EN_05272009
INTRODUCTION
Portable Audio CD player
• Liquid crystal display (LCD)
• Supports Repeat; Random, and Intro functions
• 20-track programmable memory
• Automatic power-off function
• Low battery indication
What’s included
• Portable audio
CD player
• Stereo
headphones
• Warranty card
• Playable Media: Audio CD (CD-R)
Location of Controls
1. CD compartment 7. I__ button
2. DC IN jack 8. PROG button
3. HEADPHONE jack 9. MODE button
4. VOLUME dial 10. STOP / POWER OFF button
5. CD OPEN button 11. PLAY / PAUSE XII button
6. ``I button 12. LCD screen
1
2
3
4
5
6
7
8
9
10
11
12
www.jWIN.com - 1 -
Portable Audio CD Player V30M30_IM_EN_05272009
GETTING STARTED
Battery Operation
Disconnect the AC Adapter. Open the BATTERY compartment and insert 2
“AA” batteries (not included) making sure that the battery polarity (+/-) is
observed.*
Remove the batteries if the unit will not be used for a long period of time.
* Note: Failure to align the polarity properly can result in personal injury
and/or property damage. When the low battery indicator
appears on
the LCD screen, be prepared to replace the batteries.
AC Operation
Before operating the JX-CD335, make sure that the voltage on the unit
corresponds to the voltage of your local area. Unravel the AC Line Cord;
insert one end into a DC jack on the unit and the other end into a standard
AC outlet.
• When not in use, unplug the AC power cord from the AC power
socket.
CAUTION: To prevent possible injury or property damage, use a 4.5-volt
DC, 600mA adapter only, and follow all safety instructions provided by the
adapter manufacturer.
www.jWIN.com - 2 -