JVC KENWOOD J7V004 Users Manual

Parts name

INSTRUCTIONS

MANUEL D’INSTRUCTIONS

MANUAL DE INSTRUCCIONES

BLUETOOTH TRANSMITTER
BLUETOOTH TRANSMITTER
BLUETOOTH TRANSMITTER

AA-T100BT -J/C

© 2007 Victor Company of Japan, Limited

Printed in China

LNT0097-001A

FCC INFORMATION

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that

may cause undesired operation.

CAUTION: Changes or modifications not approved by JVC could void user’s
authority to operate the equipment.

Contact

Address: JVC AMERICAS CORP.
JVC COMPANY OF AMERICA
1700 Valley Road, Wayne, N.J. 07470
Telephone: [phone]

Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, it may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

IC INFORMATION

This device complies with RSS-210 of the IC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that

may cause undesired operation of the device.

CAUTION: Changes or modifications not approved by JVC could void user’s
authority to operate the equipment.

Contact

Address: JVC CANADA INC.
21 Finchdene Square, Toronto, ON M1X 1A7
Telephone: [phone]
e-mail: [e-mail]

Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Industry Canada’s RSS-210. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, it may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

INFORMATION SUR IC

Cet appareil est conforme à la RSS-210 du réglement de la IC. Le fonctionnement
est sujet aux deux conditions suivantes:
(1) Cet appareil ne peut causer d’interférences nuisi-bles
(2) Cet appareil reçoit toute interférence même les interférences qui peuvent

occasioner un mauvais fonctionnement.

ATTENTION: Les changements ou les modifications non approuvés par JVC
risquent de retirer à l’utilisateur le droit d’utiliser l’appareil.

Contact

Adresse: JVC CANADA INC.
21 Finchdene Square, Toronto, ON M1X 1A7
Téléphone: [phone]
e-mail: [e-mail]

Remarque: L’appareil a été testé et jugé conforme aux limites des appareils
numériques de classe B, aux termes de la réglementation RSS-210 de l’industrie
du Canada. Ces limites ont pour but d’assurer une protection raisonnable contre
les interférences parasites lorsque l’appareil est utilisé dans une installation
résidentielle. Cet appareil engendre, utilise et peut émettre une énergie
radioélectrique et, s’il n’est pas installé et utilisé en stricte conformité avec ces
instructions, il peut provoquer des interférences parasites dans les liaisons
radiophoniques. Ceci ne garantit pas pour autant qu’une installation particulière
n’émettra aucune interférence. Si l’appareil engendre des interférences parasites
avec la réception radio ou télévision, ce qui pourra être déterminé en éteignant
puis en rallumant l’appareil, il est conseillé à l’utilisateur d’essayer de corriger les
interférences en prenant l’une des mesures ci-dessous:

• Modifier l’orientation ou changer l’emplacement de l’antenne de réception.

• Eloigner davantage l’appareil du récepteur.

• Brancher l’appareil dans une prise d’un circuit différent de celui auquel le
récepteur est raccordé.

• Demander l’aide de son agent ou d’un technicien radio/télévision qualifié.

ENGLISH

This product’s performance would be degraded under a strong electro-static
environment. And the function would be self-recoverable after the above case.
This product’s performance would be degraded since the disturbance from the mains
cord. And the function would be self-recoverable after the above case.

FRANÇAIS

Les performances de ce produit se détérioreront dans un environnement fortement
électro-statique. Par ailleurs, le fonctionnement se restaurera de lui-même dans le
cas ci-dessus.
Les performances de ce produit se détérioreront en cas de perturbations du cordon
d’alimentation. Par ailleurs, le fonctionnement se restaurera de lui-même dans le cas
ci-dessus.

ESPAÑOL

El rendimiento de este producto puede deteriorarse en un entorno con campos
electrostáticos fuertes. El funcionamiento se repondrá a la normalidad después del
caso arriba mencionado.
El rendimiento de este producto puede deteriorarse debido a las perturbaciones del
cable de la red eléctrica. El funcionamiento se repondrá a la normalidad después del
caso arriba mencionado.

iPod Connection terminal

LED indicator

LED flashing patterns

Status

LED Flashing pattern

While pairing Blue

●-●-●-●-●-●-●-●-●-●-●-●-●-

Connecting Blue

●-●-●--------------●-●-●----------

Communicating Blue

●---------------------●-----------------

1. For your safety…

● Never use the headphones when driving
a car, motorcycle, or bicycle. This could
result in an accident.

● Pay special attention to traffic around
you when using the headphones outside.
Failure to do so could result in an
accident.

● Be careful not to turn up the sound
volume too high. Your hearing can
be damaged by listening to sounds at
excessive volume for long periods.

● Do not disassemble or modify the
transmitter.

● Do not allow flammable, water or
metallic objects to enter the transmitter.

● In the dry air such as in winter, you
may feel a static shock when using the
transmitter.

2. Avoid using the transmitter…

● in places subject to excessive humidity or
dust

● in places subject to extremely high (over
40°C or 104°F) or low (under 0°C or
32°F) temperatures

3. DO NOT leave the transmitter…

● exposed to direct sunlight

● near a heater

4. To protect the transmitter, DO NOT…

● allow them to get wet

● shake them or drop them against hard

objects

● insert forcibly when connecting the unit;
otherwise the unit and the connected
device may be damaged.

● apply excessive force to the unit when
connected; otherwise the unit and the
connected device may be damaged.

● touch the terminals of the unit and the
connected device or contact metallic
object to them; otherwise damage or
malfunction may be caused with poor
contact or a static shock.

5. About iPod…

● IF THE IPOD DOES NOT PLAY
CORRECTLY, PLEASE UPDATE YOUR
IPOD SOFTWARE TO THE LATEST
VERSION. FOR DETAILS ABOUT
UPDATING YOUR IPOD, CHECK ON
THE APPLE WEB SITE.
<http://www.apple.com>

● SOUND DISTORTION MAY OCCUR
WHEN PLAYING BACK AUDIO
SOURCE WITH HIGH RECORDING
LEVELS. WHEN DISTORTION
OCCURS, IT IS RECOMMENDED
TO TURN OFF THE EQUALIZER OF
THE IPOD. FOR INFORMATION ON
OPERATING THE IPOD, SEE THE
IPOD INSTRUCTION MANUAL.

● JVC IS NOT RESPONSIBLE FOR ANY
LOSS OF OR DAMAGE TO IPOD
THAT MIGHT RESULT FROM THE
USE OF THIS PRODUCT.

English

Thank you for purchasing this JVC product.
Before you begin operating this unit, please read the operating instructions carefully to be sure
you get the best possible performance.
If you have any questions, consult your JVC dealer.

CAUTION

Registering to a Bluetooth device – Pairing

You can register up to 8 Bluetooth devices to
the unit.

• The device that has the oldest last connection
date will be overwritten when you register the
9th Bluetooth device.

Before pairing...

• Turn off the iPod.

• Place the target Bluetooth device within 1 m
of the unit.

1 Connect the unit to the dock

connector on the bottom of the
iPod, then turn on the iPod.

The LED indicator starts flashing rapidly.

2 Turn on the target Bluetooth

device and execute pairing
operation on the device to find
the unit.

The unit automatically starts pairing and the
flash will become slower after the pairing
completed.

Listening to Music

Preparation:

• Finish pairing between the unit and the
Bluetooth device.

• Connect the unit to the iPod.

1 Turn on the iPod.

2 Turn on the Bluetooth device.

The unit automatically turns on and will
connect to the target Bluetooth device.

3 Start playback of the iPod.

Refer to the iPod’s instruction manual for
the operation of the iPod.

• If the target Bluetooth device supports
the AVRCP of the Bluetooth Profile,
play, pause and search (forward/reverse)
functions are available from the target
Bluetooth device.

To stop using the unit,

Turn off the iPod and disconnect the unit.

Features

This unit is a stereo transmitter using Bluetooth® wireless technology.

Compatible iPods

● iPod (with click wheel, with color display, with video)

● iPod mini

● iPod nano (1st generation, 2nd generation (aluminum))

• Do not connect the unit to devices other than above. Otherwise, mulfunctions may occur on the
unit or the devices.

• This unit does not support iPod 3rd generation.

Control

Music

with iPod

About Bluetooth

Bluetooth is a short-range wireless radio
communication technology for the mobile
device such as cellular phones, portable PCs,
and other devices. The Bluetooth devices can
be connected without cables and communicate
each other.

About Bluetooth Profile

Bluetooth Profile designates the way of
communication between Bluetooth devices.
The system supports the following Bluetooth
Profiles.
A2DP: Advanced Audio Distribution Profile
The profile controls sending/receiving the high­quality audio contents.
AVRCP: Audio/Video Remote Control Profile
The profile controls the functions of audio/
video devices such as playing, stopping, pausing

and volume control.

About pairing

Pairing creates a unique and encrypted link
between two Bluetooth devices and lets them
communicate with each other. Bluetooth devices
will not work if the devices have not been
paired.

Cautions on Bluetooth
communication

• Microwaves emitted from Bluetooth devices
may affect the operation of electronic
medical devices. Turn off this unit and other
Bluetooth devices in hospitals, airplanes,
trains, or crowding places.

• Bluetooth devices use 2.4 GHz band, which
is the same as that used by wireless LAN
devices and microwave oven. Interference
may occur near these devices and cause
noise, disconnectivity, or a decrease of
communication speed.

• Connection with all Bluetooth devices cannot
be guaranteed. Connectivity, operation,
display indication or function may differ
depending on the characteristics and
specification of the devices.

• Some Bluetooth devices take more time to
establish connection.

• To use the Bluetooth functions, the Bluetooth
devices are required to be compatible with
the same Bluetooth profiles as this unit is.
However, the functions may differ depending
on the specifications of the Bluetooth device
even when it is compatible with the same
profiles.

Troubleshooting

What appears to be trouble is not always
serious. Check the following points before
consult your JVC dealer.

Cannot pair the devices.

☞ You cannot pair the Bluetooth device having

sending function only.

☞ Bring the devices as closer as possible.

Cannot connect the devices.

☞ Pairing is incomplete. Perform the pairing

again.

The sound is intermittent/The
communication range is small.

☞ Although Bluetooth wireless technology

can transmit the contents within the range
of approx. 10 m, obstacles (human bodies,
metallic objects, wall, etc.) or radiowave
condition may affect the sound and decrease
its range.

☞ The sound may be intermittent in the

following cases. Avoid the following
conditions when you use this unit.

– Places where the wireless local area

network is applied.
– Near the microwave oven.
– Near the other Bluetooth devices.
– Places where the radiowave is used.

No sound.

☞ The connection between the Bluetooth device

and this unit is incomplete. Connect the
devices again.

Specifications

Designs and specifications are subject to change without notice.

Compatible iPods:

iPod (with click wheel, with color display, with
video), iPod mini, iPod nano (1st generation,
2nd generation (aluminum))

Bluetooth version:

Bluetooth 2.0 certified

Output power:

Bluetooth power class 2

Service area:

max. 10 m (10.9 yd.) (approx.)*
* Communication range may vary depending

on the environmental conditions.

Frequency band:

2.4 GHz (2,4000 GHz - 2,4835 GHz)

Bluetooth profile:

A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)

Supported Codec:

SBC

Power supply:

supplied from iPod
Battery life**:
max. XXX hours
Standby time: max. XXX hours
** Depends on use or the type of the iPod

connected

Mass:

6 g (0.21 oz.)

● iPod is a trademark of Apple Inc., registered
in the U.S. and other countries.

● The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Victor
Company of Japan, Limited (JVC) is under
license. Other trademarks and trade names
are those of their respective owners.

BT_transmitter_J.indd 1BT_transmitter_J.indd 1 07.8.2 10:48:44 AM07.8.2 10:48:44 AM

Parts name

iPod Connection terminal

LED indicator

LED flashing patterns

Status

LED Flashing pattern

While pairing Blue

●-●-●-●-●-●-●-●-●-●-●-●-●-

Connecting Blue

●-●-●--------------●-●-●----------

Communicating Blue

●---------------------●-----------------

1. For your safety…

● Never use the headphones when driving
a car, motorcycle, or bicycle. This could
result in an accident.

● Pay special attention to traffic around
you when using the headphones outside.
Failure to do so could result in an
accident.

● Be careful not to turn up the sound
volume too high. Your hearing can
be damaged by listening to sounds at
excessive volume for long periods.

● Do not disassemble or modify the
transmitter.

● Do not allow flammable, water or
metallic objects to enter the transmitter.

● In the dry air such as in winter, you
may feel a static shock when using the
transmitter.

2. Avoid using the transmitter…

● in places subject to excessive humidity or
dust

● in places subject to extremely high (over
40°C or 104°F) or low (under 0°C or
32°F) temperatures

3. DO NOT leave the transmitter…

● exposed to direct sunlight

● near a heater

4. To protect the transmitter, DO NOT…

● allow them to get wet

● shake them or drop them against hard

objects

● insert forcibly when connecting the unit;
otherwise the unit and the connected
device may be damaged.

● apply excessive force to the unit when
connected; otherwise the unit and the
connected device may be damaged.

● touch the terminals of the unit and the
connected device or contact metallic
object to them; otherwise damage or
malfunction may be caused with poor
contact or a static shock.

5. About iPod…

● IF THE IPOD DOES NOT PLAY
CORRECTLY, PLEASE UPDATE YOUR
IPOD SOFTWARE TO THE LATEST
VERSION. FOR DETAILS ABOUT
UPDATING YOUR IPOD, CHECK ON
THE APPLE WEB SITE.
<http://www.apple.com>

● SOUND DISTORTION MAY OCCUR
WHEN PLAYING BACK AUDIO
SOURCE WITH HIGH RECORDING
LEVELS. WHEN DISTORTION
OCCURS, IT IS RECOMMENDED
TO TURN OFF THE EQUALIZER OF
THE IPOD. FOR INFORMATION ON
OPERATING THE IPOD, SEE THE
IPOD INSTRUCTION MANUAL.

● JVC IS NOT RESPONSIBLE FOR ANY
LOSS OF OR DAMAGE TO IPOD
THAT MIGHT RESULT FROM THE
USE OF THIS PRODUCT.

French

Thank you for purchasing this JVC product.
Before you begin operating this unit, please read the operating instructions carefully to be sure
you get the best possible performance.
If you have any questions, consult your JVC dealer.

CAUTION

Registering to a Bluetooth device – Pairing

You can register up to 8 Bluetooth devices to
the unit.

• The device that has the oldest last connection
date will be overwritten when you register the
9th Bluetooth device.

Before pairing...

• Turn off the iPod.

• Place the target Bluetooth device within 1 m
of the unit.

1 Connect the unit to the dock

connector on the bottom of the
iPod, then turn on the iPod.

The LED indicator starts flashing rapidly.

2 Turn on the target Bluetooth

device and execute pairing
operation on the device to find
the unit.

The unit automatically starts pairing and the
flash will become slower after the pairing
completed.

Listening to Music

Preparation:

• Finish pairing between the unit and the
Bluetooth device.

• Connect the unit to the iPod.

1 Turn on the iPod.

2 Turn on the Bluetooth device.

The unit automatically turns on and will
connect to the target Bluetooth device.

3 Start playback of the iPod.

Refer to the iPod’s instruction manual for
the operation of the iPod.

• If the target Bluetooth device supports
the AVRCP of the Bluetooth Profile,
play, pause and search (forward/reverse)
functions are available from the target
Bluetooth device.

To stop using the unit,

Turn off the iPod and disconnect the unit.

Features

This unit is a stereo transmitter using Bluetooth® wireless technology.

Compatible iPods

● iPod (with click wheel, with color display, with video)

● iPod mini

● iPod nano (1st generation, 2nd generation (aluminum))

• Do not connect the unit to devices other than above. Otherwise, mulfunctions may occur on the
unit or the devices.

• This unit does not support iPod 3rd generation.

Control

Music

with iPod

About Bluetooth

Bluetooth is a short-range wireless radio
communication technology for the mobile
device such as cellular phones, portable PCs,
and other devices. The Bluetooth devices can
be connected without cables and communicate
each other.

About Bluetooth Profile

Bluetooth Profile designates the way of
communication between Bluetooth devices.
The system supports the following Bluetooth
Profiles.
A2DP: Advanced Audio Distribution Profile
The profile controls sending/receiving the high­quality audio contents.
AVRCP: Audio/Video Remote Control Profile
The profile controls the functions of audio/
video devices such as playing, stopping, pausing

and volume control.

About pairing

Pairing creates a unique and encrypted link
between two Bluetooth devices and lets them
communicate with each other. Bluetooth devices
will not work if the devices have not been
paired.

Cautions on Bluetooth
communication

• Microwaves emitted from Bluetooth devices
may affect the operation of electronic
medical devices. Turn off this unit and other
Bluetooth devices in hospitals, airplanes,
trains, or crowding places.

• Bluetooth devices use 2.4 GHz band, which
is the same as that used by wireless LAN
devices and microwave oven. Interference
may occur near these devices and cause
noise, disconnectivity, or a decrease of
communication speed.

• Connection with all Bluetooth devices cannot
be guaranteed. Connectivity, operation,
display indication or function may differ
depending on the characteristics and
specification of the devices.

• Some Bluetooth devices take more time to
establish connection.

• To use the Bluetooth functions, the Bluetooth
devices are required to be compatible with
the same Bluetooth profiles as this unit is.
However, the functions may differ depending
on the specifications of the Bluetooth device
even when it is compatible with the same
profiles.

Troubleshooting

What appears to be trouble is not always
serious. Check the following points before
consult your JVC dealer.

Cannot pair the devices.

☞ You cannot pair the Bluetooth device having

sending function only.

☞ Bring the devices as closer as possible.

Cannot connect the devices.

☞ Pairing is incomplete. Perform the pairing

again.

The sound is intermittent/The
communication range is small.

☞ Although Bluetooth wireless technology

can transmit the contents within the range
of approx. 10 m, obstacles (human bodies,
metallic objects, wall, etc.) or radiowave
condition may affect the sound and decrease
its range.

☞ The sound may be intermittent in the

following cases. Avoid the following
conditions when you use this unit.

– Places where the wireless local area

network is applied.
– Near the microwave oven.
– Near the other Bluetooth devices.
– Places where the radiowave is used.

No sound.

☞ The connection between the Bluetooth device

and this unit is incomplete. Connect the
devices again.

Specifications

Designs and specifications are subject to change without notice.

Compatible iPods:

iPod (with click wheel, with color display, with
video), iPod mini, iPod nano (1st generation,
2nd generation (aluminum))

Bluetooth version:

Bluetooth 2.0 certified

Output power:

Bluetooth power class 2

Service area:

max. 10 m (10.9 yd.) (approx.)*
* Communication range may vary depending

on the environmental conditions.

Frequency band:

2.4 GHz (2,4000 GHz - 2,4835 GHz)

Bluetooth profile:

A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)

Supported Codec:

SBC

Power supply:

supplied from iPod
Battery life**:
max. XXX hours
Standby time: max. XXX hours
** Depends on use or the type of the iPod

connected

Mass:

6 g (0.21 oz.)

● iPod is a trademark of Apple Inc., registered
in the U.S. and other countries.

● The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Victor
Company of Japan, Limited (JVC) is under
license. Other trademarks and trade names
are those of their respective owners.

Parts name

iPod Connection terminal

LED indicator

LED flashing patterns

Status

LED Flashing pattern

While pairing Blue

●-●-●-●-●-●-●-●-●-●-●-●-●-

Connecting Blue

●-●-●--------------●-●-●----------

Communicating Blue

●---------------------●-----------------

1. For your safety…

● Never use the headphones when driving
a car, motorcycle, or bicycle. This could
result in an accident.

● Pay special attention to traffic around
you when using the headphones outside.
Failure to do so could result in an
accident.

● Be careful not to turn up the sound
volume too high. Your hearing can
be damaged by listening to sounds at
excessive volume for long periods.

● Do not disassemble or modify the
transmitter.

● Do not allow flammable, water or
metallic objects to enter the transmitter.

● In the dry air such as in winter, you
may feel a static shock when using the
transmitter.

2. Avoid using the transmitter…

● in places subject to excessive humidity or
dust

● in places subject to extremely high (over
40°C or 104°F) or low (under 0°C or
32°F) temperatures

3. DO NOT leave the transmitter…

● exposed to direct sunlight

● near a heater

4. To protect the transmitter, DO NOT…

● allow them to get wet

● shake them or drop them against hard

objects

● insert forcibly when connecting the unit;
otherwise the unit and the connected
device may be damaged.

● apply excessive force to the unit when
connected; otherwise the unit and the
connected device may be damaged.

● touch the terminals of the unit and the
connected device or contact metallic
object to them; otherwise damage or
malfunction may be caused with poor
contact or a static shock.

5. About iPod…

● IF THE IPOD DOES NOT PLAY
CORRECTLY, PLEASE UPDATE YOUR
IPOD SOFTWARE TO THE LATEST
VERSION. FOR DETAILS ABOUT
UPDATING YOUR IPOD, CHECK ON
THE APPLE WEB SITE.
<http://www.apple.com>

● SOUND DISTORTION MAY OCCUR
WHEN PLAYING BACK AUDIO
SOURCE WITH HIGH RECORDING
LEVELS. WHEN DISTORTION
OCCURS, IT IS RECOMMENDED
TO TURN OFF THE EQUALIZER OF
THE IPOD. FOR INFORMATION ON
OPERATING THE IPOD, SEE THE
IPOD INSTRUCTION MANUAL.

● JVC IS NOT RESPONSIBLE FOR ANY
LOSS OF OR DAMAGE TO IPOD
THAT MIGHT RESULT FROM THE
USE OF THIS PRODUCT.

Spanish

Thank you for purchasing this JVC product.
Before you begin operating this unit, please read the operating instructions carefully to be sure
you get the best possible performance.
If you have any questions, consult your JVC dealer.

CAUTION

Registering to a Bluetooth device – Pairing

You can register up to 8 Bluetooth devices to
the unit.

• The device that has the oldest last connection
date will be overwritten when you register the
9th Bluetooth device.

Before pairing...

• Turn off the iPod.

• Place the target Bluetooth device within 1 m
of the unit.

1 Connect the unit to the dock

connector on the bottom of the
iPod, then turn on the iPod.

The LED indicator starts flashing rapidly.

2 Turn on the target Bluetooth

device and execute pairing
operation on the device to find
the unit.

The unit automatically starts pairing and the
flash will become slower after the pairing
completed.

Listening to Music

Preparation:

• Finish pairing between the unit and the
Bluetooth device.

• Connect the unit to the iPod.

1 Turn on the iPod.

2 Turn on the Bluetooth device.

The unit automatically turns on and will
connect to the target Bluetooth device.

3 Start playback of the iPod.

Refer to the iPod’s instruction manual for
the operation of the iPod.

• If the target Bluetooth device supports
the AVRCP of the Bluetooth Profile,
play, pause and search (forward/reverse)
functions are available from the target
Bluetooth device.

To stop using the unit,

Turn off the iPod and disconnect the unit.

Features

This unit is a stereo transmitter using Bluetooth® wireless technology.

Compatible iPods

● iPod (with click wheel, with color display, with video)

● iPod mini

● iPod nano (1st generation, 2nd generation (aluminum))

• Do not connect the unit to devices other than above. Otherwise, mulfunctions may occur on the
unit or the devices.

• This unit does not support iPod 3rd generation.

Control

Music

with iPod

About Bluetooth

Bluetooth is a short-range wireless radio
communication technology for the mobile
device such as cellular phones, portable PCs,
and other devices. The Bluetooth devices can
be connected without cables and communicate
each other.

About Bluetooth Profile

Bluetooth Profile designates the way of
communication between Bluetooth devices.
The system supports the following Bluetooth
Profiles.
A2DP: Advanced Audio Distribution Profile
The profile controls sending/receiving the high­quality audio contents.
AVRCP: Audio/Video Remote Control Profile
The profile controls the functions of audio/
video devices such as playing, stopping, pausing

and volume control.

About pairing

Pairing creates a unique and encrypted link
between two Bluetooth devices and lets them
communicate with each other. Bluetooth devices
will not work if the devices have not been
paired.

Cautions on Bluetooth
communication

• Microwaves emitted from Bluetooth devices
may affect the operation of electronic
medical devices. Turn off this unit and other
Bluetooth devices in hospitals, airplanes,
trains, or crowding places.

• Bluetooth devices use 2.4 GHz band, which
is the same as that used by wireless LAN
devices and microwave oven. Interference
may occur near these devices and cause
noise, disconnectivity, or a decrease of
communication speed.

• Connection with all Bluetooth devices cannot
be guaranteed. Connectivity, operation,
display indication or function may differ
depending on the characteristics and
specification of the devices.

• Some Bluetooth devices take more time to
establish connection.

• To use the Bluetooth functions, the Bluetooth
devices are required to be compatible with
the same Bluetooth profiles as this unit is.
However, the functions may differ depending
on the specifications of the Bluetooth device
even when it is compatible with the same
profiles.

Troubleshooting

What appears to be trouble is not always
serious. Check the following points before
consult your JVC dealer.

Cannot pair the devices.

☞ You cannot pair the Bluetooth device having

sending function only.

☞ Bring the devices as closer as possible.

Cannot connect the devices.

☞ Pairing is incomplete. Perform the pairing

again.

The sound is intermittent/The
communication range is small.

☞ Although Bluetooth wireless technology

can transmit the contents within the range
of approx. 10 m, obstacles (human bodies,
metallic objects, wall, etc.) or radiowave
condition may affect the sound and decrease
its range.

☞ The sound may be intermittent in the

following cases. Avoid the following
conditions when you use this unit.

– Places where the wireless local area

network is applied.
– Near the microwave oven.
– Near the other Bluetooth devices.
– Places where the radiowave is used.

No sound.

☞ The connection between the Bluetooth device

and this unit is incomplete. Connect the
devices again.

Specifications

Designs and specifications are subject to change without notice.

Compatible iPods:

iPod (with click wheel, with color display, with
video), iPod mini, iPod nano (1st generation,
2nd generation (aluminum))

Bluetooth version:

Bluetooth 2.0 certified

Output power:

Bluetooth power class 2

Service area:

max. 10 m (10.9 yd.) (approx.)*
* Communication range may vary depending

on the environmental conditions.

Frequency band:

2.4 GHz (2,4000 GHz - 2,4835 GHz)

Bluetooth profile:

A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)

Supported Codec:

SBC

Power supply:

supplied from iPod
Battery life**:
max. XXX hours
Standby time: max. XXX hours
** Depends on use or the type of the iPod

connected

Mass:

6 g (0.21 oz.)

● iPod is a trademark of Apple Inc., registered
in the U.S. and other countries.

● The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Victor
Company of Japan, Limited (JVC) is under
license. Other trademarks and trade names
are those of their respective owners.

BT_transmitter_J.indd 2BT_transmitter_J.indd 2 07.8.2 10:48:59 AM07.8.2 10:48:59 AM