JVC XV-N322S User Manual

OPEN/ CLOSE

LIST

SET UP

CLEAR

– SLOW

DISPLAY ON SCREEN

ENTER

STANDBY/ON

VFP I/P

CANCEL RETURN

SOUND EFFECT

TITLE/

GROUP DIMMER

AUDIO

SUBTITLEANGLE

SLIDE EFFECT

ZOOM

123

456

789

THUMBNAIL/

TOP

NEXTPREVIOUS

SELECT

Basic playback

Buttons To do

3* Start/resume normal Playback 7 Stop

• When RESUME is ON or DISC RESUME, this player memorizes the position on the disc where you interrupted playback.

– To resume playback, press 3. – To stop playback completely,

press 7 again.

8* Pause

• Each time you press 8 on the remote control, the still picture advances to the next frame.

¡/1 Fast forward/backward

(While paused)

Slow-motion playback

• Each time you press the button, the playback speed changes.

¢/4 Skip chapter/track

•If you press and hold the button during playback, playback is advanced/reversed at 5 times normal speed.

VARI-PLAY

(variable playback)

(For DVD Video)

The disc is played back at about

1.2 or 1.5 times (FAST)/0.8 or 0.6 times (SLOW) normal speed. The sound is not muted, and the subtitle does not go off (except for DTS).

(For SVCD/VCD)

The disc is played back at about 2 times (FAST)/0.5 times (SLOW) normal speed.

(Only for DVD Video)

The playback position moves back 10 seconds before the current position (only within the same title).

38 on the player starts/pauses playback.

Changing the display brightness

Press DIMMER to change the brightness of the display window.

Using the disc menu

You can operate a disc—SVCD/ VCD with Playback Control* (PBC)—using the disc menu shown on the TV screen. * A method of controlling disc play

for SVCD/VCD by using the disc menu.

7 For DVD

1 Press TOP MENU or MENU to show the disc menu. 2 Press 5/∞/2/3 to select a desired item, then press

ENTER or 3 (SELECT).

• With some discs, you can also select items by entering the number using the numeric buttons.

7 For SVCD/VCD

1 While stopped, press TOP MENU or 3 (SELECT) to

show the menu.

2 Press the numeric buttons to select a desired item.

To select 5: press 5. To select 23: press 2, then 3. To select 40: press 4, then 0.

• To move to the next or previous page of the current menu, press ¢ or 4.

• To return to the previous menu, press RETURN.

To play back without PBC

While stopped, press the numeric buttons instead of 3 (SELECT) to start playback.

To reactivate PBC

• Press TOP MENU or MENU.

• Press 7 to stop playback, then 3 (SELECT).

Turning on and off the player

Open/close the disc tray

Changing the display window

contents

Each time you press DISPLAY, the display window contents changes.

Locating the beginning of a scene

or song

You can select a title/chapter/ track directly and start playback.

For DVD Video: (While stopped) select title. (While playing back) select

chapter.

For SVCD/VCD/CD:

Select track. To select 5: press 5.

To select 23: press 2, then 3. To select 40: press 4, then 0.

•If you press TITLE/GROUP before entering the number, you can select the title instead of the chapter.

DVD PLAYER

XV-N320B XV-N322S

INSTRUCTIONS

Warnings, Cautions and Others

GNT0059-002B[UC]

EN 1104MOC-MW-SC

Region code of DVD VIDEO

This player can play back DVD VIDEO discs whose region code numbers include “1.” Examples of playable DVD VIDEO discs:

The player’s region code is printed on the rear of the player

Note of Color system format

This player accommodates the NTSC system, and also can play back discs recorded with PAL system. (PAL video signals are converted to an NTSC signal and output.)

Supplied accessories

If anything is missing, consult your dealer immediately.

• Audio/video cable (Yellow/White/Red) (x 1)

• Remote control (x 1)

• R6(SUM-3)/AA(15F) battery (x 2)

VIDEO

ALL

423

231 564

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

For U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

For Canada/pour le Canada CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1. Do not remove screws, covers or cabinet.

2. Do not expose this appliance to rain or moisture.

ATTENTION

Afin d’éviter tout risque d’électrocution, d’incendie, etc.:

1. Ne pas enlever les vis ni les panneaux et ne pas ouvrir le coffret de l’appareil.

2. Ne pas exposer l’appareil à la pluie ni à l’humidité.

Caution –– STANDBY/ON button!

Disconnect the mains plug to shut the power off completely. The STANDBY/ON button in any

position does not disconnect the mains line. The power can be remote controlled.

Attention –– Touche STANDBY/ON!

Déconnecter la fiche de secteur pour couper complètement le courant. La touche STANDBY/ON

ne coupe jamais complètement la ligne de secteur, quelle que soit sa position. Le courant peut être télécommandé.

CLASS 1 LASER PRODUCT REPRODUCTION OF LABELS WARNING LABEL INSIDE OF THE UNIT

PRODUIT LASER DE CLASSE 1 REPRODUCTION D’ETIQUETTES ETIQUETTE D’AVERTISSEMENT A L’INTERIEUR DE L’APPAREIL

CAUTION:

• Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

• Do not place any naked flame sources, such as lighted candles, on the apparatus.

• When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

• Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

ATTENTION:

• Ne bloquez pas les orifices ou les trous de ventilation. (Si les orifices ou les trous de ventilation sont bloqués par un journal un tissu, etc., la chaleur peut ne pas être évacuée correctement de l’appareil.)

• Ne placez aucune source de flamme nue, telle qu’une bougie, sur l’appareil.

• Lors de la mise au rebut des piles, veuillez prendre en considération les problèmes de l’environnement et suivre strictement les règles et les lois locales sur la mise au rebut des piles.

• N’exposez pas cet appareil à la pluie, à l’humidité, à un égouttement ou à des éclaboussures et ne placez pas des objets remplis de liquide, tels qu’un vase, sur l’appareil.

For Canada/pour le Canada

THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS FORM DIGITAL APPARATUS AS SET OUT IN THE INTERFERENCE-CAUSING EQUIPMENT STANDARD ENTITLED “DIGITAL APPARATUS,” ICES-003 OF THE DEPARTMENT OF COMMUNICATIONS.

CET APPAREIL NUMERIQUE RESPECTE LES LIMITES DE BRUITS RADIOELECTRIQUES APPLICABLES AUX APPAREILS NUMERIQUES DE CLASSE B PRESCRITES DANS LA NORME SUR LE MATERIEL BROUILLEUR: “APPAREILS NUMERIQUES”, NMB-003 EDICTEE PAR LE MINISTRE DES COMMUNICATIONS.

CAUTION

THIS PRODUCT USES A LASER SYSTEM. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

ATTENTION:

CE PRODUIT UTILISE UN SYSTEME LASER. UN EMPLOI DES COMMANDES, RÉGLAGES OU PROCÉDURES DE PERFORMANCE AUTRE QUE CELUI SPÉCIFIÉ DANS CE DOCUMENT RISQUE D’ENTRAÎNER UNE EXPOSITION DANGEREUSE AUX RAYONNEMENTS. NE PAS OUVRIR NI RÉPARER DE VOUS-MÊME. FAIRE APPEL À UN PERSONNEL QUALIFIÉ POUR L’ENTRETIEN.

Connections

Before making connections:

• Do not connect the AC power cord until all other connections have been made.

• Connect VIDEO OUT of the player directly to the video input of your TV. Connecting VIDEO OUT of the player to a TV via a VCR/an integrated TV/Video system may cause a monitor problem.

Basic Connection

Connecting to a TV with component jacks

To switch the scanning mode between Progressive and Interlace, press and hold VFP-I/P on the remote control for a few seconds.

NOTES

• Connect “Y” to “Y,”“P

B” to “PB(CB),”“PR” to “PR(CR)”

correctly.

• When using the component (Y, PB, PR) jacks, do not connect the S-VIDEO jack with the player.

About the scanning mode indicator

NOTE

Some progressive TV and High-Definition TV sets are not fully compatible with the player. To check the compatibility of your TV, contact your local JVC customer service center.

Connecting to a stereo audio amplifier (receiver)

Connecting to a digital audio device

To enjoy high-quality surround sound, connect the DIGITAL OUT (COAXIAL) jack to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder.

NOTES

• Depending on the disc, no signal may be outputted from the DIGITAL OUT. Make an analog connection in this case.

• Set [DIGITAL AUDIO OUTPUT] in the [AUDIO] preference display correctly according to the connected digital audio equipment. (See “DIGITAL AUDIO OUTPUT” in “Initial settings.”)

VIDEO

COA

XIAL

TREA

ITA

L OU

AUDIO OUT

VIDEO OUT

RIGH

S-VIDEO

DIO

VIDEO

S-VIDEO

NOTES

•If your TV has a monaural audio input instead of stereo, use an optional audio cable which converts stereo audio output to monaural.

•If your TV is a HDTV or HD-ready TV, you can connect with component (Y, PB, PR) jacks. By connecting with component (Y, P

B, PR) jacks, you can select the

progressive scanning mode which provides the best picture quality.

*The S-VIDEO jack and component (Y, PB,

PR) jacks cannot be used at the same time. When using the S-VIDEO jack, do not connect the component (Y, PB, PR) jacks with the player.

S-video cable* (not supplied)

Audio/video cable* (supplied)

Red

White

Yellow

The player

[PICTURE SOURCE] of the PICTURE menu

Source type of DVD VIDEO

Film source Video source

AUTO [DDP] [P]

FILM [DDP] [DDP]

VIDEO(NORMAL)/

(ACTIVE)

[P] [P]

AXIAL

LEFT

RIGHT

EAM

AUDIO OUT

VIDEO OUT

S-VIDEO

VIDEO

To component video input

LEFT

RIGHT

AUDIO

OUT

VIDEO OUT

VIDEO

To analog audio input

COAXIAL

LEFT

RIGHT

PCM/STREAM

DIGITAL

OUT

AUDIO

OUT

VIDEO

OUT

S-VIDEO

VIDEO

To digital audio input

To analog audio input

Precautions

Notes on the power cord

• When you are away on travel or otherwise for an extended period of time, remove the plug from the wall outlet. A small amount of power (1.0 W) is always consumed while the power cord is connected to the wall outlet.

• When unplugging the player from the wall outlet, always pull the plug, not the power cord.

• Do not handle the power cord with wet hands!

• Disconnect the power cord before cleaning the player or moving the player.

• Do not alter, twist or pull the power cord, or put anything heavy on it, which may cause fire, electric shock, or other accidents.

• If the cord is damaged, consult a dealer and have the power cord replaced with a new one.

Avoid moisture, water, dust, and high temperatures

• Do not place the player in moist or dusty places.

• If water gets inside the player, turn off the power and remove the plug from the wall outlet, then consult your dealer. Using the player in this state may cause a fire or electrical shock.

• Do not expose the player to direct sunlight or place it near a heating device.

Notes on installation

• Select a place which is level, dry and neither too hot nor too cold between 5˚C and 35˚C.

• Leave sufficient distance between the player and the TV.

• Do not install the player in a place subject to vibrations.

• Do not put heavy objects on the player.

To prevent malfunction of the player

•There are no user-serviceable parts inside. If anything goes wrong, unplug the power cord and consult your dealer.

• Do not insert any metallic objects, such as wires, hairpins, coins, etc. into the player.

• Do not block the vents. Blocking the vents may damage the player.

To clean the cabinet

• Use a soft cloth. Follow the relevant instructions on the use of chemically-coated cloths.

• Do not use benzene, thinner or other organic solvents and disinfectants. These may cause deformation or discoloring.

Playable discs

• DVD VIDEO, Audio CD, Video CD, SVCD

•DVD-R/-RW written in the DVD VIDEO format

•

CD-R/RW written in the SVCD, Video CD or Audio CD forma

•CD-R/RW written in MP3/JPEG in accordance with the “ISO 9660” format

Supported Digital audio formats:

Linear PCM, Dolby Digital, DTS (Digital Theater Systems)*

NOTES

• If a disc gets dirty, scratched or warped, or due to the disc characteristics or recording conditions, the player may not be able to play back such discs.

•The player can play back audio signals recorded in MIX-MODE CD, CD-G, CD-EXTRA and CD TEXT.

• With some discs, operations may not be possible.

*To play back DTS-encoded DVD VIDEO or DTS-

encoded Audio CD discs correctly, connect the player to an amplifier with a built-in DTS decoder. Otherwise, playback sound will be distorted.

Unplayable discs

If you try to play back discs listed below, noise may be generated and causes damage to speakers.

•DVD-RW written in the VR format

•DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM, PHOTO CD, SACD

•Unfinalized discs

• Discs of irregular shape or discs with tape, seals or paste on either the label side or playback side. Playing back these discs may damage the player.

The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.

VIDEO

Turning on the power

Inserting the AC power plug

After all other connections have been made, insert the AC power plug to the wall outlet firmly.

Installing the batteries in the remote control

Open the compartment cover, and place the two supplied R6(SUM-3)/AA(15F) batteries in the remote control according to the polarity markings (“+” and “–”) inside the compartment. Then replace the cover.

The batteries will last about six months with normal use. If the functions of the remote control become erratic, replace the batteries.

Precautions of the safe use of batteries

Observe the following precautions for the safe use of batteries. If they are used improperly their lives will be shortened, they may burst or their contents may leak.

• Remove the batteries from the remote control if it is not going to be used for a long period of time.

• Remove dead batteries and dispose of them properly.

• Never leave dead batteries lying around, take them apart, mix them with other refuse, or throw them into an incinerator.

• Never touch liquid that has leaked out of a battery.

• Do not mix new and old batteries, or batteries of different types, when placing them.

Turning on and off the player

Press STANDBY/ON.

Initial setup

When you turn on the player for the first time after purchase, the following message appears on the TV screen.

Before enjoying this player, make the initial settings as follows:

1 Press ENTER.

Press 5/∞ to select the on-screen language for the preference displays, etc., then press ENTER.

Press 5/∞ to select the monitor type, then press ENTER.

• For a normal (conventional) TV, select “4:3 LB” or “4:3 PS.” (See “MONITOR TYPE” in “Initial

settings.”)

• For a wide-screen TV, select “16:9.”

4 Press 5/∞ to select a desired digital output

signal type, then press ENTER.

Set this item correctly according to the logo on your receiver or decoder. (If you do not connect the player to such a device, press ENTER to finish the setting.)

• Receiver/decoder bearing Dolby Digital logo and no DTS, select “DOLBY DIGITAL/PCM.”

• Receiver/decoder bearing both Dolby Digital and DTS logos, select “STREAM/PCM.”

• Receiver/decoder bearing neither Dolby Digital nor DTS logo, or digital recorder, select “PCM ONLY.”

To bring up the DVD PLAYER SETUP display later

Press SET UP for a few seconds until the DVD PLAYER SETUP display appears.

EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO SETTING YES - PRESS ENTER NO - PRESS CANCEL

MENU LANGUAGE

ENGLISH

AUDIO LANGUAGE

ENGLISH

SUBTITLE

OFF

ON SCREEN LANGUAGE

ENGLISH

DVD PLAYER SETUP

ENGLISH FRENCH SPANISH

MONITOR TYPE

4:3 L.B.

PICTURE SOURCE

AUTO

SCREEN SAVER

BACKGROUND

STANDARD

DVD PLAYER SETUP

16:9 4:3 LB 4:3 PS

DIGITAL AUDIO OUTPUT

DOLBY DIGITAL/PCM

ANALOG DOWNMIX

DOLBY PROLOGIC

D.RANGE CONTROL

OUTPUT LEVEL

DVD PLAYER SETUP

PCM ONLY DOLBY DIGITAL/PCM STREAM/PCM

STANDARD

Advanced Operations

OPEN/

LIST

SET UP

CLEAR

– SLOW

DISPLAY ON SCREEN

ENTER

STANDBY/ON

VFP

I/P

CANCEL RETURN

SOUND EFFECT

TITLE/

GROUP DIMMER

AUDIO

SUBTITLEANGLE

SLIDE EFFECT

ZOOM

123

456

789

THUMBN

AIL/

TOP

NEXTPREVIOUS

SELECT

Changing the picture tone (VFP)

The VFP (Video Fine Processor) function allows you to adjust the picture character according to the type of programming, picture tone or personal preferences.

1 Press VFP-I/P. 2 Press 2/3 to select the desired

preset.

NORMAL

For watching TV in a general room.

CINEMA For watching a movie

software in a room with suppressed light.

USER1 USER2

You can adjust parameters that affect the picture character and store the settings as a user preset. See below.

To adjust the picture tone

1 Select “USER1” or “USER2.” 2 Press 5/∞ to select a parameter, then press ENTER.

3 Press 5/∞ to adjust the parameter, then press ENTER. 4 Repeat step 2 and 3 to adjust other parameters. 5 Press VFP-I/P to finish the setting.

USER 1

BRIGHTNESS

GAMMA

CONTRAST

SATURATION

TINT

SHARPNESS

Y DELAY

+ 4

MID

+10

LOW

+ 2

Selected Preset

Parameter

GAMMA Adjust this if the neutral color is bright or dark. The

brightness of dark and bright portion is maintained (LOW/MID/HIGH).

BRIGHTNESS

Adjust this if the picture is bright or dark on the whole (–16 (darkest) to +16 (brightest)).

CONTRAST Adjust this if the far and near position is unnatural

(–12 to +12).

SATURATION

Adjust this if the picture is whitish or blackish (–16 (blackest) to +16 (whitest)).

TINT Adjust this if the appearance of flesh tone is

unnatural (–16 to +16).

SHARPNESS Adjust this if the picture is indistinct (LOW/HIGH). Y DELAY Adjust this if the picture looks separately/

overlapped (–2 to +2).

Changing the Sound Field

Each time you press SOUND EFFECT, the Sound Effect mode

changes.

• As the value becomes bigger, the Sound Effect works stronger.

Zooming the picture

Each time you press ZOOM, the magnification changes.

• You can use 5/∞/2/3 button to move the zoomed position.

To return to the normal playback, select the normal size by pressing ZOOM repeatedly.

Changing the language, sound

and scene angle

1 Press the button. 2 Press the button repeatedly or

5/∞ to select the desired item.

3 Press ENTER to finish the

setting.

Buttons To do

AUDIO For DVD Video:

select audio languages.

For SVCD/VCD:

select the audio channel.

SUBTITLE select the subtitle. ANGLE select the view-angle.

Basic Operations

With the label side up

Turning on and off the player

Insert a disc

1 Press 0 to open the disc tray. 2 Place a disc in the disc tray.

• To insert an 8-cm disc, place it in the inner recess.

3 Press 0 to close the disc tray.

Point toward the remote sensor directly as possible (the operating range is approx. 5 m.)

• Each indicator lights up when corresponding function/mode is activated, or corresponding information is on the main display.

Main display

About On-screen guide icons

: Playback. : Pause.

/:Slow-motion playback with the current

speed.

/:Fast forward/backward playback with the

current speed.

: At the beginning of a scene containing multi-

angle views.

: At the beginning of a scene containing multi-

audio sounds.

: At the beginning of a scene containing multi-

subtitles.

You can change the setting so that the on-screen guide icons do not appear on the TV screen. (See “ON SCREEN GUIDE” in “Initial settings.”)

Menu bar functions

You can use various functions from the menu bar.

To bring up the menu bar

When a disc is inserted, press ON SCREEN twice.

A menu bar for the type of disc inserted will appear under the status bar.

Ex.: Menu bar for DVD VIDEO

To dismiss the menu bar and the status bar, press ON SCREEN.

Basic operation procedure

Press 2/3 to select the icon you want to work with.

2 Press ENTER.

After pressing ENTER: (1) When a pull-down menu appears, press 5/∞ to

select the setting you want, then press ENTER.

(2) When a number-entry box appears, use the

numeric buttons to enter the number you want, then press ENTER.

(3) When changing setting, press ENTER

repeatedly to select the setting you want.

NOTES

• The selected item on the menu bar is shown in green.

• The available functions differ depending on the player status. Refer to the explanation below to check when you can use a certain function.

Menu bar functions

selects the time mode shown in the display

window and the status bar.

• TOTAL:Elapsed time of current title (DVD) or a disc (CD/VCD/SVCD)

• T.REM: Remaining time of current title (DVD) or a disc (CD/VCD/SVCD) (Except for DVD: while stopped, disc total time)

• TIME: Elapsed time of current chapter (DVD) or track (CD/VCD/SVCD)

• REM: Remaining time of current chapter (DVD) or track (CD/VCD/SVCD) (while stopped, current track total time)

selects repeat mode.

DVD: During playback CD: In any condition VCD/SVCD: In any condition except PBC playback

• CHAPTER: Current chapter repeat (DVD)

• TITLE: Current title repeat (DVD)

• TRACK: Current track repeat (CD/VCD/SVCD)

• ALL: All track repeat (CD/VCD/SVCD)

• A-B: A-B repeat (During playback). After

selecting A-B, press ENTER at the beginning point of repeat, then press ENTER again at the end point.

• OFF: Repeat mode deactivated. Select this to

quit repeat mode.

specifies beginning point of a title (DVD) or a

disc (CD/VCD/SVCD) by the time. DVD: In any condition CD: In any condition except program or

random playback

VCD/SVCD: In any condition except PBC or program

or random playback

specifies a chapter to play back from

(DVD only).

selects the audio language (DVD), sound

track (DVD), or audio channel (VCD/SVCD) during playback.

selects the subtitle language (DVD) or

subtitle (SVCD) during playback.

selects a desired scene angle in a multi-

angle part (DVD only).

specifies the playback order of tracks while

stopped (unavailable for DVD). You can program up to 99 tracks.

1. After selecting icon, press the numeric

buttons to specify tracks in the desired order.

• To correct the program, press 5/∞ to move to the track to be corrected, then press CANCEL. The track is erased and the subsequent programmed tracks move up. Pressing 7 clears all the programmed tracks.

2. Press 3(SELECT) to start program playback.

• During program playback, you cannot edit the program contents.

• To exit the program mode, press ON SCREEN after clearing the program.

activates random playback while stopped

(unavailable for DVD).

After selecting icon, press ENTER.

The player starts random playback.

Audio/Video files playback

You can play back MP3/JPEG files on a CD/CD-R/RW.

Precautions

• Use “ISO 9660” as the disc format.

• The player does not support “packet writing (UDF files)” discs.

• The player supports discs recorded with up to five multiple sessions.

• The player may be unable to play back a disc due to the characteristics or recording conditions.

• The player recognizes up to the fifth layer of groups, 999 files per group (including unplayable files), and up to 250 groups per disc.

• Add the appropriate extension (“.mp3” and “.jpg”) to the file name.

• MP3i and MP3 Pro are not available.

• The player cannot play back a picture of more than 5120 x 3413 pixels (baseline JPEG) or 2048 x 1536 pixels (progressive JPEG).

Selecting a specific file or group

You can select files or folders (groups) using the Control display on the TV screen.

Control display

Press 5/∞/2/3 to move the cursor bar to a desired file, then press 3(SELECT).

•When you press ENTER, only the selected file is played back (except for MP3 files).

NORMAL

GROUP

MP3

SLIDESHOW

MIX

PICT01.jpg

PICT02.jpg

PICT03.jpg

MUSIC01.mp3

MUSIC02.mp3

DISC CONTROL

Select these sections to show the upper layer.

Current file

Group column

Current group

Current playback mode

File column

Troubleshooting

Power

Power does not come on.

\ Power plug is not inserted securely. Plug in

securely.

Operation

“REGION CODE ERROR!” is shown on the TV.

\ Region code of the inserted disc does not match the

player. Check the region code of the disc printed on the disc jacket.

Operation is not possible.

\ Microcomputer malfunction due to lightning or static

electricity. Turn off the power and unplug the power cord, then connect the power cord again.

\ Moisture condensation caused by a sudden change

of temperature or humidity. Turn off the power, then turn it on a few hours later.

\ The disc does not allow the operation, or an

unplayable disc is inserted. Check and replace the disc.

[LOCK] is displayed on the display window and the disc tray does not open.

\ When you press 0 while pressing down 7 on the

player in standby mode, the tray lock function is activated. The disc tray cannot be opened or closed in this status. To release this status, press 0 while pressing down 7 on the player in standby mode.

Picture

Picture is noisy.

\ The player is connected to a VCR directly and the

copyguard function is activated. Connect the player so that the picture signal flows directly to the TV. With some discs, the picture may be blurred when [PICTURE SOURCE] is set to [FILM] or [AUTO]. Set [PICTURE SOURCE] to [VIDEO (NORMAL)] or [VIDEO (ACTIVE)].

Picture is distorted when using component (Y, P

B, PR) or S-VIDEO jack(s).

\ Both the component connection and S-video

connection are made. Disconnect the unused one.

No picture is displayed on the TV screen or the screen is blurred or divided into two parts.

\ The player is in the progressive scanning mode

though it is connected to a TV via the VIDEO or S-VIDEO jack. Observe the display window. If [P] is turned on, the player is in the progressive scanning mode. Make the Progressive scanning mode inactive by using the VFP - I/P button.

Audio

DVD VIDEO disc playback sound level is lower than TV broadcast sound level.

\ Set the [D.RANGE CONTROL] preference to [TV

MODE].

Analog audio output is distorted.

\ Set the [OUTPUT LEVEL] preference to [LOW].

MP3/JPEG

No sound and/or no picture comes out.

\ MP3/JPEG disc is recorded with the “packet writing

(UDF file).” It cannot be played. Check the files you want to play back.

Files (tracks) are not played in the recorded order.

\ This player plays the files in the alphabetic order.

So, the playback order can vary.

Various playback mode

• To play back a disc continuously, select NORMAL.

Repeat playback

1. While stopped, press 5/∞/2/3 to move the cursor

bar to playback mode.

2. Press ENTER repeatedly to select the desired repeat mode.

• REPEAT 1: Repeats the current file.

• REPEAT GROUP: Repeats all files in the current group.

• REPEAT ALL: Repeats all files on the disc.

3. Press 3 to move the cursor bar to the file column, then press 3(SELECT).

Random playback

1. While stopped, press 5/∞/2/3 to move the cursor bar to playback mode.

2. Press ENTER repeatedly to select RANDOM.

3. Press 3 to move the cursor bar to the file column, then press 3(SELECT).

Program playback

1. While stopped, press 5/∞/2/3 to move the cursor bar to playback mode.

2. Press ENTER repeatedly to select PROGRAM.

3. Press 5/∞/2/3 to select the desired file, then press ENTER.

4. Repeat step 3 until all the desired files are selected.

• To erase the last programmed file, press 2 to move the cursor bar to the programmed files column, then press CANCEL.

5. Press 3(SELECT).

Various JPEG files playback

To zoom in a picture

Press ZOOM.

Each time you press ZOOM, you can magnify a JPEG file (x1.5/x2).

NOTE

This function is not available for some JPEG files depending on their resolution size and JPEG format.

To rotate/reflect a still picture

While a still picture is played back:

•Pressing 2/3 rotates the picture by 90°.

•Pressing 5 reflects the picture vertically.

•Pressing ∞ reflects the picture horizontally.

To select a JPEG files from the thumbnail list

1. Press and hold THUMBNAIL/LIST while a JPEG file is selected on the Control display.

2. Press 5/∞/2/3 to select the desired picture, then press ENTER.

• You can change the page of thumbnail list by pressing 4/¢.

Slide show playback of JPEG files

Press 3(SELECT) while a JPEG file is selected on the Control display.

• To select slide show effect Press and hold ANGLE-SLIDE EFFECT until [SLIDE EFFECT MODE:] and the current mode appears on the TV screen. By pressing and holding the button repeatedly, you can select the effect from 11 effects, random effect selection (RAND), and no effect (NONE). The effect is not applied to progressive JPEG files.

Initial settings

You can change the settings of this player according to your preferences and playing environment.

How to set the Initial settings

1 Press SET UP. 2 Press 2/3 to select the menu. 3 Press 5/∞ to move to select the item. 4 Press ENTER. 5 Press 5/∞ to select the options, then press

ENTER.

To dismiss a preference display

Press SET UP.

NOTES

• Some items in the menus cannot be changed during playback.

• During MP3 files playback, you cannot show the menus.

• If the upper and lower parts of the menu are cut off, adjust the picture size control of the TV.

• For settings of the LANGUAGE menu or the PARENTAL LOCK menu, see also “Language codes” below.

• Depending on the disc, the settings may not apply correctly.

Item Contents

MENU LANGUAGE You can select the default menu language of DVD VIDEO.

AUDIO LANGUAGE You can select the default audio language of DVD VIDEO.

SUBTITLE You can select the default subtitle language of DVD VIDEO.

ON SCREEN LANGUAGE

You can select “ENGLISH,” “FRENCH,” or “SPANISH” as the on-screen language.

LANGUAGE menu

PICTURE menu

Item Contents

MONITOR TYPE You can select the monitor type to match your TV when you play back DVD VIDEO

discs recorded for wide-screen televisions.

[16:9] (Wide television screen): For a wide-screen (16:9) TV. [4:3 LB] (Letter Box conversion): For a normal (4:3) TV. Displays a wide-screen

picture to fit the width of the TV screen keeping the aspect ratio.

[4:3 PS] (Pan Scan conversion): For a normal (4:3) TV. The picture is zoomed up

to filling the screen vertically and the left and right sides of the picture are cut off.

PICTURE SOURCE You can obtain optimal picture quality by selecting the source type of the disc

contents.

[AUTO]: Normally, select this option. The player recognizes the picture type (film or

video source) of the current disc according to the disc information.

[FILM]: For a film source disc. [VIDEO(NORMAL)]: For a video source disc with relatively a few movements. [VIDEO(ACTIVE)]: For a video source disc with relatively a lot of movements.

SCREEN SAVER You can set the screen saver function to ON or OFF.

BACKGROUND You can use your favorite image as the opening display.

[STANDARD]: Display the JVC original image. [USER]: Display your favorite image as the opening display when a JPEG image is

registered.

[SAVE AS BACKGROUND]: To register a new image, select this while a JPEG

image is displayed on the TV.

16:9 4:3 LB

4:3 PS

AUDIO menu

Item Contents

DIGITAL AUDIO OUTPUT

Set this item correctly according to the logo on your receiver or decoder.

[PCM ONLY]: Receiver/decoder bearing neither Dolby Digital nor DTS logo, or digital

recorder.

[DOLBY DIGITAL/PCM]: Receiver/decoder bearing Dolby Digital logo and no DTS. [STREAM/PCM]: Receiver/decoder bearing both Dolby Digital and DTS logos.

ANALOG DOWNMIX Set this item properly according to your analog audio connection to play the sound of

the surround multichannel audio on a DVD VIDEO.

[DOLBY SURROUND]: Select this when connecting to a surround decoder. [STEREO]: Select this when connecting to a stereo amplifier or TV, or in case you

want to record from a DVD VIDEO to a MiniDisc, cassette, etc.

D.RANGE CONTROL

Set this item to listen to DVD VIDEO recorded in Dolby Digital format at low or middle volume.

[WIDE RANGE]: You can enjoy powerful playback sound. [NORMAL]: Normally, select this. [TV MODE]: Select this if the sound level of DVD VIDEO is lower than the one of TV

program to make the sound at a lower volume clear.

OUTPUT LEVEL Set this item to attenuate the level of the signal output from the analog AUDIO OUT

terminals. If the sound from the speaker is distorted, select [LOW].

OTHERS menu

Item Contents

RESUME You can select the resume playback mode.

[ON]: The player resumes playback from the position where playback has been

stopped if the disc is still in the disc tray.

[OFF]: This function is deactivated. [DISC RESUME]: The player resumes playback of the last 10 discs played. The

player retains a memory of the stopped position of each disc even if the disc is removed from the disc tray.

ON SCREEN GUIDE Activate or deactivate the on-screen guide.

AUTO STANDBY Set the time until the player turns off (into standby) automatically if playback is stopped

for more than 30 minutes or 60 minutes.

PARENTAL LOCK Select this item, then press ENTER to show the PARENTAL LOCK menu for limiting

playback by children. Scenes which are limited by this function are not played or replaced with other scenes.

[COUNTRY CODE]: Select the code of your country/area. [SET LEVEL]: Select the level of restriction. (“1” is the strictest.) [PASSWORD]: Enter your 4-digit password by pressing the numeric buttons (0 to 9). [EXIT]: Select this and press ENTER to go back to the OTHERS menu.

Notes:

• Some DVD VIDEO cannot be played by this function. If you try to play such a disc, the PARENTAL LOCK menu appears on the TV and asks whether you want to release the lock or not. To release the lock and play, select “TEMPORARY RELEASE,” press ENTER, then enter your password. Otherwise, eject the disc.

• To change the setting of the limitation, you need to enter your password.

• If you forget your password, enter “8888.”

SET LEVEL

NONE

PASSWORD

_ _ _ _

PARENTAL LOCK

EXIT

COUNTRY CODE

Specifications

General

Readable discs:

DVD VIDEO, DVD-R (Video format), DVD-RW (Video format), SVCD, Video CD, Audio CD (CD-DA), CD-R/RW (CD-DA, SVCD, Video CD, MP3 format, JPEG)

Video format: NTSC, 480i/480p selectable

Other

Power requirements: AC 120 V , 60 Hz Power consumption:

11.0 W (POWER ON), 1.0 W (STANDBY mode)

Mass: 1.5 kg Dimensions (W x H x D):

435 mm x 44 mm x 201.5 mm

Video outputs

Component (pin jacks)

Y Output: 1.0 Vp-p (75 Ω) PB/PR Output: 0.7 Vp-p (75 Ω)

VIDEO (pin jack): 1.0 Vp-p (75 Ω) S-VIDEO (S jack)

Y Output: 1.0 Vp-p (75 Ω) C Output: 286 mVp-p (75 Ω)

Horizontal resolution: 500 lines or more

Audio outputs

ANALOG OUT (pin jack): 2.0 Vrms (10 kΩ) DIGITAL OUT (COAXIAL): 0.5 Vp-p (75 Ω termination)

Audio characteristics

Frequency response CD (sampling frequency 44.1 kHz): 2 Hz to 20 kHz DVD (sampling frequency 48 kHz):

2 Hz to 22 kHz(4 Hz to 20 kHz for DTS and Dolby Digital bitstream signals)

DVD (sampling frequency 96 kHz): 2 Hz to 44 kHz Wow and flutter: Unmeasurable (less than ± 0.002%) Total harmonic distortion: less than 0.009%

•Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

•“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

• This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Specifications and appearance are subject to change without prior notice.

Country/Area code list for Parental Lock

AD Andorra AE United Arab

Emirates AF Afghanistan AG Antigua and

Barbuda AI Anguilla AL Albania AM Armenia AN Netherlands

Antilles AO Angola AQ Antarctica AR Argentina AS American Samoa AT Austria AU Australia AW Aruba AZ Azerbaijan BA Bosnia and

Herzegovina BB Barbados BD Bangladesh BE Belgium BF Burkina Faso BG Bulgaria BH Bahrain BI Burundi BJ Benin BM Bermuda BN Brunei

Darussalam BO Bolivia BR Brazil BS Bahamas BT Bhutan BV Bouvet Island BW Botswana BY Belarus BZ Belize CA Canada CC Cocos (Keeling)

Islands CF Central African

Republic CG Congo CH Switzerland CI Côte d’Ivoire

CK Cook Islands CL Chile CM Cameroon CN China CO Colombia CR Costa Rica CU Cuba CV Cape Verde CX Christmas Island CY Cyprus CZ Czech Republic DE Germany DJ Djibouti DK Denmark DM Dominica DO Dominican

Republic DZ Algeria EC Ecuador EE Estonia EG Egypt EH Western Sahara ER Eritrea ES Spain ET Ethiopia FI Finland FJ Fiji FK Falkland Islands FM Micronesia

(Federated States

of) FO Faroe Islands FR France FX France,

Metropolitan GA Gabon GB United Kingdom GD Grenada GE Georgia GF French Guiana GH Ghana GI Gibraltar GL Greenland GM Gambia GN Guinea GP Guadeloupe GQ Equatorial Guinea GR Greece

GS South Georgia

and the South

Sandwich GT Guatemala GU Guam GW Guinea-Bissau GY Guyana HK Hong Kong HM Heard Island and

McDonald Islands HN Honduras HR Croatia HT Haiti HU Hungary ID Indonesia IE Ireland IL Israel IN India IO British Indian

Ocean Territory IQ Iraq IR Iran (Islamic

Republic of) IS Iceland IT Italy JM Jamaica JO Jordan JP Japan KE Kenya KG Kyrgyzstan KH Cambodia KI Kiribati KM Comoros KN Saint Kitts and

Nevis KP Korea,

Democratic

People’s Republic

of KR Korea, Republic

of KW Kuwait KY Cayman Islands KZ Kazakhstan LA Lao People’s

Democratic

Republic LB Lebanon LC Saint Lucia

LI Liechtenstein LK Sri Lanka LR Liberia LS Lesotho LT Lithuania LU Luxembourg LV Latvia LY Libyan Arab

Jamahiriya MA Morocco MC Monaco MD Moldova,

Republic of MG Madagascar MH Marshall Islands ML Mali MM Myanmar MN Mongolia MO Macau MP Northern Mariana

Islands MQ Martinique MR Mauritania MS Montserrat MT Malta MU Mauritius MV Maldives MW Malawi MX Mexico MY Malaysia MZ Mozambique NA Namibia NC New Caledonia NE Niger NF Norfolk Island NG Nigeria NI Nicaragua NL Netherlands NO Norway NP Nepal NR Nauru NU Niue NZ New Zealand OM Oman PA Panama PE Peru PF French Polynesia

PG Papua New

Guinea PH Philippines PK Pakistan PL Poland PM Saint Pierre and

Miquelon PN Pitcairn PR Puerto Rico PT Portugal PW Palau PY Paraguay QA Qatar RE Réunion RO Romania RU Russian

Federation RW Rwanda SA Saudi Arabia SB Solomon Islands SC Seychelles SD Sudan SE Sweden SG Singapore SH Saint Helena SI Slovenia SJ Svalbard and Jan

Mayen SK Slovakia SL Sierra Leone SM San Marino SN Senegal SO Somalia SR Suriname ST Sao Tome and

Principe SV El Salvador SY Syrian Arab

Republic SZ Swaziland TC Turks and Caicos

Islands TD Chad TF French Southern

Territories TG Togo TH Thailand TJ Tajikistan

TK Tokelau TM Turkmenistan TN Tunisia TO Tonga TP East Timor TR Turkey TT Trinidad and

Tobago TV Tuvalu TW Taiwan TZ Tanzania, United

Republic of UA Ukraine UG Uganda UM United States

Minor Outlying

Islands US United States UY Uruguay UZ Uzbekistan VA Vatican City State

(Holy See) VC Saint Vincent and

the Grenadines VE Venezuela VG Virgin Islands

(British) VI Virgin Islands

(U.S.) VN Vietnam VU Vanuatu WF Wallis and Futuna

Islands WS Samoa YE Yemen YT Mayotte YU Yugoslavia ZA South Africa ZM Zambia ZR Zaire ZW Zimbabwe

Language codes list for the LANGUAGE menu

AA Afar AB Abkhazian AF Afrikaans AM Ameharic AR Arabic AS Assamese AY Aymara AZ Azerbaijani BA Bashkir BE Byelorussian BG Bulgarian BH Bihari BI Bislama BN Bengali,Ban-

gla

BO Tibetan BR Breton

CA Catalan CO Corsican CS Czech CY Welsh DA Danish DZ Bhutani EL Greek EO Esperanto ET Estonian EU Basque FA Persian FI Finnish FJ Fiji FO Faroese FY Frisian GA Irish GD Scots Gaelic

GL Galician GN Guarani GU Gujarati HA Hausa HI Hindi HR Croatian HU Hungarian HY Armenian IA Interlingua IE Interlingue IK Inupiak IN Indonesian IS Icelandic IW Hebrew JI Yiddish JW Javanese KA Georgian

KK Kazakh KL Greenlandic KM Cambodian KN Kannada KO

Korean (KOR)

KS Kashmiri KU Kurdish KY Kirghiz LA Latin LN Lingala LO Laothian LT Lithuanian LV Latvian,

Lettish

MG Malagasy MI Maori MK Macedonian

ML Malayalam MN Mongolian MO Moldavian MR Marathi MS Malay (MAY) MT Maltese MY Burmese NA Nauru NE Nepali NL Dutch NO Norwegian OC Occitan OM

(Afan) Oromo

OR Oriya PA Panjabi PL Polish

PS Pashto,

Pushto

PT Portuguese QU Quechua RM Rhaeto-

Romance

RN Kirundi RO Rumanian RU Russian RW Kinyarwanda SA Sanskrit SD Sindhi SG Sangho SH Serbo-

Croatian

SI Singhalese SK Slovak

SL Slovenian SM Samoan SN Shona SO Somali SQ Albanian SR Serbian SS Siswati ST Sesotho SU Sundanese SV Swedish SW Swahili TA Tamil TE Telugu TG Tajik TH Thai TI Tigrinya TK Turkmen

TL Tagalog TN Setswana TO Tongan TR Turkish TS Tsonga TT Tatar TW Twi UK Ukrainian UR Urdu UZ Uzbek VI Vietnamese VO Volapuk WO Wolof XH Xhosa YO Yoruba ZU Zulu

JVC XV-N322S User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual