This model is a model to which Pick up of "XV-N320B,XV-N322S"that has already
been put on the market and "Circumference circuit of pick up" are changed.
Please see page 1-3 for details.
Readable discsDVD VIDEO, DVD-R (Video format), DVD-RW (Video format), SVCD, Video CD, Audio CD (CD-DA),
CD-R/RW (CD-DA, SVCD, Video CD, MP3 format, JPEG)
Video formatPAL, 625i/625p selectable
Other
Power requirementsAC 230 V~, 50 Hz
Power consumption11.0 W (POWER ON), 1.0 W (STANDBY mode)
Mass1.5 kg
Dimensions (W × H × D)435mm × 44mm × 201.5 mm
Video outputs
VIDEO OUT (pin jack)1.0 Vp-p (75 Ω)
RGB Output700mVp-p (75 Ω)
COMPONENT (pin jacks)Y Output: 1.0 Vp-p (75 Ω)
Pb/Pr Output: 0.7Vp-p (75 Ω)
Horizontal resolution500 lines or more
Audio outputs
ANALOG OUT (pin jack)2.0 Vrms (10 kΩ)
DIGITAL OUT (COAXIAL) 0.5 Vp-p (75 Ω termination)
Audio characteristics
Frequency responseCD (sampling frequency 44.1 kHz):2 Hz to 20 kHz
DVD (sampling frequency 48 kHz):2 Hz to 22 kHz
(4 Hz to 20 kHz for DTS and Dolby Digital bitstream signals)
DVD (sampling frequency 96 kHz):2 Hz to 44 kHz
Wow and flutterUnmeasurable (less than +- 0.002%)
Total harmonic distortionless than 0.009%
• Manufactured under license from DolbyLaboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
• This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use
of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
• “CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE “STANDARD
DEFINITION” OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p
AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.”
1-2 (No.YD056B)
For this service manual
This model is a model to which Pick up of "XV-N320B,XV-N322S" that has already been put
on the market and "Circumference circuit of pick up" are changed.
< When the label in figure is pasted in the main body >
The circumference circuit of pick up and pick up is different from the model to whom the label is not
pasted by the same model name, and use this manual, please.
Please already refer to the issued service manual when the label is not pasted.
The already published service manual
* ISSUE No.YD056 2005/3 XV-N320B, XV-N322S for EK,EU,EY,EZ,ER
GN30080-001A
0786
Used only service dealer
Please refer to service manual of an applicable model MK2.
or
inside
Outside of rear panelInside of rear panel
The position of the label might be somewhat different.
(No.YD056B)1-3
SECTION 1
PRECAUTION
Please refer to "XV-N320B,XV-N322S for EK,EU,EY,EZ,ER
(issue number : YD056)" about this section.
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
Please refer to "XV-N320B,XV-N322S for EK,EU,EY,EZ,ER
(issue number : YD056)" about this section.
SECTION 3
DISASSEMBLY
Please refer to "XV-N320B,XV-N322S for EK,EU,EY,EZ,ER
(issue number : YD056)" about this section.
SECTION 4
ADJUSTMENT
Please refer to "XV-N320B,XV-N322S for EK,EU,EY,EZ,ER
(issue number : YD056)" about this section.
SECTION 5
TROUBLESHOOTING
Please refer to "XV-N320B,XV-N322S for EK,EU,EY,EZ,ER
(issue number : YD056)" about this section.
1-4 (No.YD056B)
(No.YD056B)1-5
Victor Company of Japan, Limited
DIGITAL VIDEO STORAGE CATEGORY 12, 3-chome, Moriya-cho, kanagawa-ku, Yokohama, kanagawa-prefecture, 221-8528, Japan
(No.YD056B)
Printed in Japan
VPT
SCHEMATIC DIAGRAMS
DVD PLAYER
XV-N320BEK2, XV-N320BEU2,
XV-N320BEY2, XV-N320BEZ2,
XV-N320BER2, XV-N322SEK2,
XV-N322SEU2, XV-N322SEY2,
XV-N322SEZ2, XV-N322SER2
CD-ROM No.SML200512
Area Suffix
EK ------------------------ U.K.
EU -------- Western Europe
EY -------- Northern Europe
EZ --------- Eastern Europe
ER ---- Russian Federation
This model is a model to which Pick up of "XV-N320B,XV-N322S" that has already
been put on the market and "Circumference circuit of pick up" are changed.
Please see page 1-3 for details.
COPYRIGHT 2005 Victor Company of Japan, Limited
No.YD056BSCH
2005/12
CHARTS AND DIAGRAMS
NOTES OF SCHEMATIC DIAGRAM
Safety precautions
The Components indentified by the symbolare
critical for safety. For continued safety, replace safety
critical components only with manufacturer's recommended parts.
1. Units of components on the schematic diagram
Unless otherwise specified.
1) All resistance values are in ohm. 1/6 W, 1/8 W (refer to
parts list).
Chip resistors are 1/16 W.
K: KΩ(1000Ω), M: MΩ (1000KΩ)
2) All capacitance values are in µF, (P: PF).
3) All inductance values are in µH, (m: mH).
4) All diodes are 1SS133, MA165 or 1N4148M (refer to parts
list).
Note: The Parts Number, value and rated voltage etc. in
the Schematic Diagram are for references only.
When replacing the parts, refer to the Parts List.
2. Indications of control voltage
AUX : Active at high.
AUX or AUX(L) : Active at low.
!
4. Voltage measurement
1) Regulator (DC/DC CONV) circuits
REC : Colour bar signal.
PB : Alignment tape (Colour bar).
—: Unmeasurable or unnecessary to measure.
2) Indication on schematic diagram
Voltage indications for REC and PB mode on the schematic diagram are as shown below.
REC mode
12 3
2.5
(5.0)
PB mode
1.8
PB and REC modes
(Voltage of PB and REC modes
are the same)
Note: If the voltages are not indicated on the schematic
diagram, refer to the voltage charts.
6. Indication of the parts for adjustments
The parts for the adjustments are surrounded with the circle
as shown below.
3. Interpreting Connector indications
1
2
Removable connector
3
1
2
Wire soldered directly on board
3
1
Non-removable Board connector
2
3
1
2
4
Board to Board
3
Connected pattern on board
The arrows indicate signal path
7. Indication of the parts not mounted on the circuit board
“OPEN” is indicated by the parts not mounted on the circuit
board.