JVC XV-N212S, XV-N310B, XV-N312S, XV-N315B, XV-N316S Instruction Manual

DVD PLAYER

XV-N315B/XV-N316S/ XV-N310B/XV-N312S/ XV-N210B/XV-N212S

VIDEO

Before operation

Preparations 4

Basic playback 9

Various kinds of playback 12

Audio/Video files playback 21

Region code of DVD VIDEO

This player can play back DVD VIDEO discs whose region code numbers include “2.”

Examples of playable DVD VIDEO discs:

ALL

The player’s region code is printed on the rear of the player.

INSTRUCTIONS

Changing the initial settings 25

Additional information 30

GNT0040-003C

[B]

Warnings, Cautions and Others

IMPORTANT for the U.K. DO NOT cut off the mains plug from this equipment. If the plug

fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. If this product is not supplied fitted with a mains plug then follow the instructions given below:

IMPORTANT. DO NOT make any connection to the terminal which is marked

with the letter E or by the safety earth symbol or coloured green or green-and-yellow. The wires in the mains lead on this product are coloured in accordance with the following code:

Blue : Neutral

Brown : Live As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1. Do not remove screws, covers or cabinet.

2. Do not expose this appliance to rain or moisture.

CAUTION

• Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out).

• Do not place any naked flame sources, such as lighted candles, on the apparatus.

• When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

• Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution: Proper Ventilation

To avoid risk of electric shock and fire and to protect from damage, locate the apparatus as follows: Front: No obstructions and open spacing. Sides: No obstructions in 3 cm from the sides. Top: No obstructions in 5 cm from the top. Back: No obstructions in 15 cm from the back. Bottom: No obstructions, place on the level surface.

pacing 15 cm or more

XV-N210B/XV-N212S XV-N310B/XV-N312S XV-N315B/XV-N316S

Front

Wall or obstructions

Stand height 5 cm or more

Floor

Caution –– STANDBY/ON button!

Disconnect the mains plug to shut the power off completely. The STANDBY/ON button in any position does not disconnect the mains line. The power can be remote controlled.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT.

G-1

Supplied accessories

Check that you have all the following accessories supplied to you. If anything is missing, consult your dealer immediately.

• Remote control unit (× 1)

• Lithium battery CR2032 (× 1)

About this manual

• The display window information and OSD (On Screen Display) menu items are put in brackets [ ] in the operation procedures.

• Usable disc(s) for each operation/function is (are) referred to by the icons;

Precautions

Notes on the power cord

• When you are away on travel or otherwise for an extended period of time, remove the plug from the wall outlet. A small amount of power (2.0W) is always consumed while the power cord is connected to the wall outlet.

• When unplugging the player from the wall outlet, always pull the plug, not the power cord.

• Do not handle the power cord with wet hands!

Avoid moisture, water and dust

• Do not place the player in moist or dusty places.

• If water gets inside the player, turn off the power and remove the plug from the wall outlet, then consult your dealer. Using the player in this state may cause a fire or electrical shock.

Table of contents

Supplied accessories................................................................1

About this manual .....................................................................1

Precautions ................................................................................ 1

Before operation................................................... 2

About discs ..............................................................................2

Names of parts and controls....................................................3

Preparations ......................................................... 4

Connections............................................................................. 4

Using the remote control unit................................................... 8

Basic playback ..................................................... 9

Turning the player on and off................................................... 9

Initial setup ..............................................................................9

Starting playback ...................................................................10

Restarting playback after stopping (resuming playback) ....... 11

Various kinds of playback ................................. 12

Playback at various speeds................................................... 12

Locating the beginning of a scene or song............................ 13

Playing from a specific position .............................................13

Changing the playback order.................................................14

Repeat playback.................................................................... 16

Changing the language, sound and scene angle ..................17

Special picture and sound effects.......................................... 18

Menu bar functions ................................................................19

Avoid high temperatures

• Do not expose the player to direct sunlight or place it near a heating device.

Notes on installation

• Select a place which is level, dry and neither too hot nor too cold between 5°C and 35°C.

• Leave sufficient distance between the player and the TV.

• Do not install the player in a place subject to vibrations.

• Do not put heavy objects on the player.

To prevent malfunction of the player

• There are no user-serviceable parts inside. If anything goes wrong, unplug the power cord and consult your dealer.

• Do not insert any metallic objects, such as wires, hairpins, coins, etc. into the player.

• Do not block the vents. Blocking the vents may damage the player.

To clean the cabinet

• Use a soft cloth. Follow the relevant instructions on the use of chemically-coated cloths.

• Do not use benzene, thinner or other organic solvents and disinfectants. These may cause deformation or discoloring.

Audio/Video files playback................................ 21

Outline ...................................................................................21

Basic operations ....................................................................22

Direct selection for JPEG files ...............................................22

Changing the playback order.................................................23

Repeat playback.................................................................... 23

Slide show playback ..............................................................23

Changing the picture of the opening display .........................24

Changing the initial settings ............................. 25

Selecting preferences ............................................................ 25

Limiting playback by children................................................. 28

Additional information ....................................... 30

Troubleshooting..................................................................... 30

Specifications ........................................................................31

Appendix A: Country/Area code list for Parental Lock........... 32

Appendix B: Table of languages and their abbreviations ......33

Appendix C: Digital output signal chart..................................34

Appendix D: Glossary............................................................ 35

Before operation

About discs

Playable disc types

Discs with the following marks can be played back on the player.

DVD VIDEO SVCD Video CD

VIDEO

The DVD Logo is a trademark. The player can also play back the following discs:

• DVD-R and DVD-RW discs written in the DVD VIDEO format and finalized

• CD-R and CD-RW discs written in the SVCD, Video CD or Audio CD format and finalized

• CD-R and CD-RW discs written in MP3/JPEG/MPEG-4 in accordance with the “ISO 9660” format (See page 21 for details.)

NOTE

If a disc gets dirty, scratched or warped, or due to the disc characteristics or recording conditions, it may take considerable time for the player to read the content, or the player may not be able to play back such discs.

The player can play back audio signals recorded in MIX-MODE CD, CD-G, CD-EXTRA and CD TEXT.

Audio CD

Digital audio formats

The player supports the following digital audio formats (see page 35 “Glossary” for descriptions of each audio format):

Linear PCM, MPEG Multichannel, Dolby Digital, DTS (Digital Theater Systems)

NOTE

Depending on the player’s [DIGITAL AUDIO OUTPUT] setting, digital audio signals may not be output as they are recorded on the disc. See “DIGITAL AUDIO OUTPUT” on page 27 for details.

Notes on discs

• With some DVD VIDEO discs, the player starts playback automatically after inserting the disc.

• The image may be sometimes poor or noisy due to defects in the disc itself.

• With some discs, operations described in this manual may not be possible.

Care and handling of discs

If a disc gets dirty, dusty, scratched or warped, playback sound and picture may be deteriorated. Take proper precautions when handling discs.

Handling

• Do not touch the surface of the disc.

• Do not damage, stick paper to, or use any adhesive on either the label side or playback side.

Storing discs

• Keep discs in their cases. If discs are piled on top of one another without their protective cases, they can be damaged.

• Do not put discs in a location where they may be exposed to direct sunlight, or where the humidity or temperature is high. Avoid leaving discs in a car!

Cleaning discs

• Wipe with a soft dry cloth, moving from the center outwards. If a disc is difficult to clean, wipe with a cloth moistened with water.

Color system format

This player accommodates the PAL system, and also can play back discs recorded with NTSC system whose Region Code numbers include “2.” Note that the NTSC video signal on a disc is converted to a PAL signal and output.

Unplayable discs

The player does not play back discs listed below. If you try to play back these discs, noise may generate causing damage to speakers.

• DVD-RW discs written in the VR format

• DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM, PHOTO CD, SACD

In addition, the player does not play:

• Unfinalized discs

• Discs of irregular shape or discs with tape, seals or paste on either the label side or playback side. Playing back these discs may damage the player.

• Never use record cleaners, petrol, alcohol or any anti-static agents.

Notes on copyright

Check the copyright laws in your country before recording from DVD VIDEO, SVCD, Video CD, Audio CD, MP3, JPEG, and MPEG-4 discs. Recording of copyrighted material may infringe copyright laws.

Names of parts and controls

5768

Remote control unit

Front panel

1 STANDBY/ON button (9) 2 STANDBY/ON indicator (9) 3 Disc tray (10) 4 0 button (10) 5 7 button (11, 13) 6 3 button (10, 13) 7 8 button (11, 12) 8 4 button (12, 13, 22) 9 ¢ button (12, 13, 22) 0 Display window (see the illustration below)

- Remote sensor (8) = QUICK PLAYBACK button (12)

Display window

2143

1 Progressive mode indicators

(for XV-N310B/XV-N312S/XV-N315B/XV-N316S)

[P] turns on in the progressive scanning mode. [DDP] turns on depending on the [PICTURE SOURCE] preference setting and the source type of the current DVD VIDEO disc (see page 6 for details).

2 Dolby Digital/DTS indicators

[Dolby D] turns on when playing back a Dolby Digital sound source. [DTS] turns on when playing back a DTS-encoded digital sound source.

3 Resume indicator

Turns on when playback is interrupted with the resume function activated.

4 Group/title/track/chapter indicators

Show what is indicated by the multi-information display during playback.

5 Repeat mode indicator

Turn on in the repeat playback mode and shows the currently selected repeat mode.

6 Program/random indicators

Turn on in the program playback mode/random playback mode respectively.

7 3 (play)/8 (pause) indicators

Turn on in the playback mode/pause mode respectively.

8 Multi-information window

Indicates various kinds of information by numbers and alphabets, such as the player’s current status (“READ,” “OPEN,” etc.) or currently played DVD’s title and chapter number.

DISPLAY

1 2

/DIMMER

SOUND EFFECT

5 6

ANGLE

SLIDE EFFECT

TOP MENU

9 0

SET UP

SLOW

PREVIOUS SELECT

= ~

STANDBY/ON

TITLE

/GROUP RETURN

SUB TITLE AUDIO ZOOM

CANCEL

213

546

879

010 +10

THUMBNAIL /LIST

ENTER

I/P ON SCREEN

CLEAR

$ %

& * (

) _

+ ¡

! @

(Illustration: for XV-N310B/XV-N312S/XV-N315B/XV-N316S)

1 DISPLAY/DIMMER button

Press to change the display window contents. Press and hold to change the brightness of the display window. You can select the display window brightness from three levels. Release the button at the desired brightness.

2 TITLE/GROUP button (14) 3 SOUND EFFECT button (19) 4 Numeric buttons 5 SUBTITLE button (17) 6 ANGLE - SLIDE EFFECT button (17, 24) 7 TOP MENU button (13) 8 Cursor selection (5 Up, ∞ Down, 2 Left, 3 Right) buttons 9 SET UP button (10, 24, 25) 0 ¡/SLOW + button (12)

- 1/SLOW – button (12)

= 4/PREVIOUS button (12, 13, 22) ~ 3/SELECT button (10, 22)

! button (12) @ 7/CLEAR button (11, 22) # Infrared signal window (8)

$ STANDBY/ON button (9) % RETURN button (13) ^ CANCEL button (14) & AUDIO button (17) * ZOOM button (18, 22) ( MENU - THUMBNAIL/LIST button (13, 22) ) ENTER button _ VFP button (for XV-N210B/XV-N212S) (18)

VFP - I/P button (for XV-N310B/XV-N312S/XV-N315B/

XV-N316S) (6, 18)

+ ON SCREEN button (10, 14, 16, 19) ¡ ¢/NEXT button (12, 13, 22)

8 button (11, 24)

Preparations

RIG

LEFT

DIGITA

AUDIO OU

OUT

OMPON

Connections

Before using the player, connect the player to a TV and/or amplifier.

Connecting to a TV

A Connecting to a TV with the SCART connector

You can enjoy using the player by simply connecting it to your television set with a 21-pin SCART cable.

Before making connections

• Do not connect the AC power cord until all other connections have been made.

• Connect VIDEO OUT of the player directly to the video input of your TV. Connecting VIDEO OUT of the player to a TV via a VCR may cause a monitor problem when playing back a copy-protected disc. You may also have a monitor problem when connecting the player to an integrated TV/ Video system.

• In the following description, “TV” may be substituted with

“monitor” or “projector.”

• Terminal names used for other components may be different

from those used in the following description.

SCART cable (not supplied)

XV-N210B/XV-N212S XV-N310B/XV-N312S/

XV-N315B/XV-N316S

Y/C

RGB/COMPOSITE

COMPOSITE

See “Setting the selector (for XV-N210B/XV-N212S)” below.

Y/C

COMPONENT

/COMPOSITE

See “Setting the selector (for XV-N310B/XV-N312S/ XV-N315B/XV-N316S)” below.

Setting the selector (for XV-N210B/XV-N212S)

When you connect the player to a TV with the SCART connector, set the COMPOSITE - Y/C - RGB/COMPOSITE selector correctly according to your TV.

• If your TV only accomodates the composite video signal: Set the selector to “COMPOSITE.”

• If your TV accomodates Y/C signals: Set the selector to “Y/C” so you can enjoy better-quality pictures.

• If your TV accomodates RGB signals: Set the selector to “RGB/COMPOSITE.”

• If your TV accommodates both RGB and Y/C, set the selector to “RGB/COMPOSITE.” Otherwise the picture cannot be displayed correctly.

RGB/COMPOSITE

S-VIDEO

VIDEO

AUDIO

Only for XV-N310B/XVN312S/XV-N315B/XV-N316S

The player

Setting the selector (for XV-N310B/XV-N312S/XV-N315B/ XV-N316S)

When you connect the player to a TV with the SCART connector, set the COMPONENT/COMPOSITE - Y/C - RGB/COMPOSITE selector correctly according to your TV.

• If your TV only accomodates the composite video signal: Set the selector to “COMPONENT/COMPOSITE” or “RGB/ COMPOSITE.”

• If your TV accomodates Y/C signals: Set the selector to “Y/C” so you can enjoy better-quality pictures.

• If your TV accomodates RGB signals: Set the selector to “RGB/COMPOSITE.”

• If your TV accommodates both RGB and Y/C, set the selector to “RGB/COMPOSITE.” Otherwise the picture cannot be displayed correctly.

NOTE

Do not connect multiple devices using multiple connectors.

B Connecting to a TV having composite video input jack

RIG

XIAL

DIGITA

L O

AUD

OMP

ENT

XV-N210B/XV-N212S XV-N310B/XV-N312S/

Y/C

COMPOSITE

RGB/COMPOSITE

XV-N315B/XV-N316S

Y/C

COMPONENT

/COMPOSITE

RGB/COMPOSITE

Ye l l o w

White

Red

VIDEO

UDIO

Only for XV-N310B/XV-N312S/ XV-N315B/XV-N316S

Set the COMPOSITE - Y/C RGB/COMPOSITE selector to “COMPOSITE.”

Set the COMPONENT/ COMPOSITE - Y/C - RGB/ COMPOSITE selector to “RGB/ COMPOSITE.”

Audio/video cable (not supplied)

NOTES

• Do not connect multiple devices using multiple connectors.

• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo audio output to monaural.

The player

Ye l l o w

White

Red

C Connecting to a TV with component jacks

VIDEO

XIA

DIGITAL OUT

VIDEO OUT

AUDIO OUT

OUT

COMPONENT

For XV-N310B/XV-N312S/XV-N315B/ XV-N316S only

You can enjoy picture of high-quality color reproduction by connecting the COMPONENT VIDEO OUT jacks on the player to your TV.

NOTES

• Connect “Y” to “Y,” “PB” to “PB” (CB), “PR” to “PR” (CR) correctly.

• The video output jack, scart connector and component jacks cannot be used at the same time.

• If your TV has component video input jacks of BNC type, use an adapter which converts a pin jack to a BNC jack (not supplied).

Progressive scan video playback available

In the progressive scanning mode, you can enjoy high quality picture with less flickers when the COMPONENT VIDEO OUT jacks are connected to a TV or monitor that supports the progressive video input.

About the scanning mode

Depending on the material source format, DVD VIDEO discs can be classified into two types; film source and video source (note that some DVD VIDEO discs contain both film source and video source). When the player plays back a film source material, uninterlaced progressive output signals are created using the original information. When a video source material is played back, the player interleaves lines between the interlaced lines on each to create the interpolated picture and outputs as the progressive signal.

Component video cable (not supplied)

Y/C

COMPONENT

/COMPOSITE

RGB/COMPOSITE

Set the COMPONENT/ COMPOSITE - Y/C - RGB/ COMPOSITE selector to “COMPONENT/COMPOSITE.”

Audio cable (not supplied)

Activating the Progressive scanning mode

Press and hold down VFP - I/P on the remote control unit for a few seconds. When the scanning mode is set to the Progressive mode, the [P] indicator lights up in the display window. Depending on the [PICTURE SOURCE] preference display and whether the current DVD VIDEO disc is film-source or videosource, the indicator that lights up in the display window differs, as shown in the table below.

Setting of [PICTURE SOURCE]

Source type of DVD VIDEO

Film source Video source

Blue

Green

Red

COMPONENT IN

White

VIDEO

AUDIO

Red

The player

GreenGreen

Red

Blue

White

Red

NOTES

• The Progressive scanning mode works only when you connect the player’s COMPONENT VIDEO OUT jacks to your TV.

• There are some progressive TV and High-Definition TV sets that are not fully compatible with the player, resulting in the unnatural picture when playing back a DVD VIDEO disc in the Progressive scanning mode. In such a case, use the Interlaced scanning mode. To check the compatibility of your TV set, contact your local JVC customer service center.

• All JVC progressive TV and High-Definition TV sets are fully compatible with the player (Example: AV-61S902).

AUTO [DDP] [P]

FILM [DDP] [DDP]

VIDEO (NORMAL)/(ACTIVE) [P] [P]

Connecting to optional audio equipment

RIG

LEF

DEO

AXIA

DIGITAL OUT

AUD

OUT

V OU

COMP

NENT

Connecting to a stereo audio amplifier/receiver

Connect the player’s AUDIO OUT (LEFT/RIGHT) jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver.

The player

Audio cable (not supplied)

Connecting to a digital audio device

You can enjoy sound of enhanced quality by connecting the player’s DIGITAL OUT (COAXIAL) jack to a digital input of an amplifier, etc., using a or coaxial digital cable. The digital audio signal on a disc will be transferred directly from the player. If the connected digital audio equipment is a Dolby Digital or DTS decoder or an amplifier with a built-in decoder, you can enjoy high-quality surround sound.

Amplifier or receiver

White

AUDIO

Red

Only for XV-N310B/XV-N312S/XV-N315B/XV-N316S

Red

White

NOTES

• It is not recommended to use the digital jacks for dubbing. When recording the sounds (DVD VIDEO, SVCD, Video CD or Audio CD) played back on the player, record them through the analog jacks.

• Depending on the disc, no signal may be output from the DIGITAL OUT. Make an analog connection in this case.

• Set [DIGITAL AUDIO OUTPUT] in the [AUDIO] preference display correctly according to the connected digital audio equipment. If setting made for [DIGITAL AUDIO OUTPUT] is incorrect, loud noise may be generated causing damage to the speakers (see page 27).

Digital equipment

The player

DIG

White

Red

Only for XV-N310B/XV-N312S/XV-N315B/XV-N316S

Coaxial digital cable (not supplied)

Red

V OU

OMPO

RIG

AUDIO OU

ENT

IGIT

OUT

EFT

AXIA

IDE

Audio cable (not supplied)

White

Connecting the power cord

When all the audio/video connections have been made, connect the AC power plug to the wall outlet. Make sure that the plugs are inserted firmly. The STANDBY/ON indicator lights in red.

Warning

• Disconnect the power cord:

- if you are not going to use the player for a long period of time.

- before cleaning the player.

- before moving the player.

• Do not:

- connect or disconnect the power cord with wet hands.

- pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or other accidents.

Precautions of the safe use of battery

• Store the battery in a place where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately.

• Do not recharge, short, disassemble or heat the battery or dispose of it in a fire. Doing any of these things may cause the battery to give off heat, crack, or start a fire.

• Do not leave the battery with other metallic materials. Doing this may cause the battery to give off heat, crack, or start a fire.

• When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may start to give off heat, crack, or start a fire.

• Do not poke the battery with tweezers or similar tools. Doing this may cause the battery to give off heat, crack, or start a fire.

• Dispose of batteries in the proper manner, according to federal, state, and local regulations.

Caution

• Do not alter, twist or pull the power cord, or put anything heavy on it, which may cause fire, electric shock, or other accidents.

• If the cord is damaged, consult a dealer and have the power cord replaced with a new one.

Using the remote control unit

To install battery

1 While pushing the lock lever (1), pull out the

battery holder (2).

2 Place the supplied battery on the battery

holder with the + side facing up.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Remote sensor

Point the top of the remote control unit toward the remote sensor as directly as possible. If you operate it from a diagonal position, the operating range (approx. 5 m) may be shorter.

Remote sensor

Lithium coin battery (product number: CR2032)

3 Insert the battery holder back into position.

Basic playback

STANDBY/ON

STANDBY/ON indicator

STANDBY/ON

• NOW READING (The player is reading the disc information.)

• REGION CODE ERROR! (The region code of the DVD VIDEO disc does not match the player. The disc cannot be played back.)

• CANNOT READ THIS DISC (The disc cannot be played back by the player.)

• OPEN (The disc tray is opening.)

• CLOSE (The disc tray is closing.)

• NO DISC (No disc is loaded.)

NOTES

• Even if you turn off the player, the player is not disconnected from the AC power source as long as it is connected to the wall outlet. This state is called standby mode. In this state, the player consumes a very small amount of power.

• You can change the picture of the opening display. (See page

24.)

Initial setup

When you turn on the player for the first time after purchase, the following message appears on the TV screen.

EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO SETTING YES - PRESS ENTER NO - PRESS CANCEL

You can set the display language, TV monitor type and digital output before using the player, by following the procedure below.

5/∞

ENTER

About invalid operation icon

When you press a button, and if the player does not accept its operation, appears on your TV screen. Operations are occasionally unacceptable even if is not displayed.

Note that some operations may not be accepted. For example, some discs may not allow rapid advance/reverse or slowmotion playback.

Turning the player on and off

Press STANDBY/ON on the remote control unit or press STANDBY/ON on the front panel.

The STANDBY/ON indicator on the front panel, which lights in red during standby, goes off.

The opening display appears on the TV screen, and the following messages may appear at the bottom of the opening display.

1 Press ENTER.

The first page of the DVD PLAYER SET UP display appears. The pull-down menu of the [ON SCREEN LANGUAGE] is already open.

DVD PLAYER SET UP

MENU LANGUAGE

AUDIO LANGUAGE

SUBTITLE

ON SCREEN LANGUAGE

SELECT

ENGLISH

ENGLISH FRENCH GERMAN

USE 5∞23 TO SELECT, USE ENTER TO CONFIRM TO EXIT, PRESS SETUP.

ON SCREEN LANGUAGE options

2 Press 5/∞ to select the desired language.

You can select the on-screen language for the preference displays, etc. from among ENGLISH, FRENCH and GERMAN.

3 Press ENTER.

The second page is shown, in which the pull-down menu of the [MONITOR TYPE] is already open.

DVD PLAYER SET UP

MONITOR TYPE

PICTURE SOURCE

SCREEN SAVER

BACK GROUND

SELECT

4:3 L.B.

16:9

AUTO

4:3 LB 4:3 PS

STANDARD

USE 5∞23 TO SELECT, USE ENTER TO CONFIRM TO EXIT, PRESS SETUP.

MONITOR TYPE options

NOW READING

Message area

4 Press 5/∞ to select the desired monitor type.

For a normal (conventional) TV, select [4:3 LB] or [4:3 PS]. For a wide-screen TV, select [16:9]. (See page 26.)

7380

Starting playback

1 Press 0 on the player to open the disc tray. 2 Place a disc in the disc tray.

DISPLAY/DIMMER

Numeric buttons

5/∞/2/3

SET UP

3 (SELECT)

ENTER ON SCREEN

8 7

5 Press ENTER.

The third page is shown, in which the pull-down menu of the [DIGITAL AUDIO OUTPUT] is already open.

DVD PLAYER SET UP

DIGITAL AUDIO OUTPUT

ANALOG DOWN MIX

D RANGE CONTROL

OUTPUT LEVEL

SELECT

DIGITAL AUDIO OUTPUT options

DOLBY DIGITAL/PCM

PCM ONLY

DOLBY PROLOGIC

DOLBY DIGITAL/PCM STREAM/PCM

USE 5∞23 TO SELECT, USE ENTER TO CONFIRM TO EXIT, PRESS SETUP.

6 Press 5/∞ to select a desired digital output

signal type.

Set this item correctly when you connect the player to an external surround decoder or D/A converter. (If you do not connect the player to such a device, you do not have to set this item.)

• When connecting to other digital device, select [PCM ONLY].

• When connecting to a Dolby Digital decoder, select [DOLBY DIGITAL/PCM].

• When connecting to a DTS decoder, select [STREAM/ PCM].

7 Press ENTER.

The TV screen returns to the opening display.

To bring up the DVD PLAYER SET UP display later

Press SET UP for a few seconds until the DVD PLAYER SET UP display appears.

With the label side up

• To insert an 8-cm disc, place it in the inner recess.

3 Press 0 on the player to close the disc tray. 4 Press 3 on the unit or 3 (SELECT) on the

remote control unit.

The player starts playback from the beginning.

• Depending on the disc, playback starts when you close the disc tray.

If a menu is shown on the TV screen

When inserting a DVD VIDEO, SVCD or Video CD disc, a menu may be shown on the TV screen. From the menu, you can select a desired item to be played back.

For DVD VIDEO

1Press 5/∞/2/3 to select a desired item. 2Press ENTER or 3 (SELECT).

The player starts playback of the selected item.

For SVCD/Video CD

Press the numeric buttons to select a desired item. The player starts playback of the selected item.

NOTES

• Do not insert an unplayable disc. (See page 2.)

• When inserting a disc on the disc tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the disc tray is closed, or you may not be able to remove the disc from the player.

To check the playback status

You can see the current selection number (the title/chapter number for DVD VIDEO or track number for SVCD/Video CD/ Audio CD), time information (the track or chapter time while stopped, or elapsed track or chapter time during playback) and the transport status (stop, playback, pause, etc.) on the TV screen.

Press ON SCREEN.

Example: for DVD VIDEO

Transfer rate

8.5Mbps

Current chapter

number

TITLE 33 TOTAL 1:25:58CHAP 33

Current title number

Current transport

status

Disc elapsed

time

+ 26 hidden pages