JVC VU-V63KITU Instructions Manual

VU-V63KITU STATION KIT INSTRUCTIONS

ENGLISH

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

USING HOUSEHOLD AC PLUG ADAPTER

In case of connecting the unit’s power cord to an AC wall
outlet other than American National Standard C73 series
type use an AC plug adapter, called a “Siemens Plug”, as
shown.
For this AC plug adapter, consult your nearest JVC dealer.

CAUTIONS:

•If used near a radio, this unit may interfere with
reception.

•Prevent inflammables, water and metallic objects from
entering the unit.

•Do not disassemble or modify the unit.

•Do not apply shocks to the unit.

•Do not subject the unit to direct sunlight.

•Avoid using the unit in extremely hot or humid places.

•Avoid using the unit in places subject to vibrations.

CAUTION (applies to the AC Charger Station):

TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE
OF PLUG TO WIDE SLOT, FULLY INSERT.

WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO

NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.

The AC Charger Station should be used with AC 120V

``

``

`,

60 Hz only in the USA and Canada. In other countries,
this unit should be used with AC 110 – 240 V

``

``

`, 50/60 Hz

only.

CAUTION:

To prevent electric shocks and fire hazards, do NOT use
any other power source.

Plug adapter (optional)

CAUTION (applies to the AC Charger Station):

TO REDUCE THE RISK OF FIRE, DO NOT
REMOVE COVER (OR BACK). NO USER–
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.

E. O. E. Design and specifications subject to change without
notice.

Specifications

NOTE:

Perform charging where the temperature is
between 10˚ and 30˚C (50˚F and 86˚F). 20˚ to 25˚C
(68˚F to 77˚F) is the ideal temperature range for
charging. If the environment is too cold, charging
may be incomplete.

Cautions

● Do not incinerate or disassemble; may explode or release toxic chemicals.

● Do not short circuit; may cause burns.

● When charging a brand new Battery Pack, or one that’s been in storage for an extended period, the

Charging Indicator may not come on. In this case, remove the Battery Pack, then reattach and try
charging again.

● Vibration noise can sometimes be heard coming from the inside of the AC Power Adapter/Charger.
This is normal.

● The AC Charger Station processes electricity internally, and will become warm during use. This is
normal. Make sure to use the AC Charger Station in well-ventilated areas only.

Warning on lithium cell battery
(for remote control unit)

The battery used in this device may present a fire or
chemical burn hazard if mistreated. Do not recharge,
disassemble, heat above 100°C (212°F) or incinerate.
Replace battery with Maxell, Panasonic (Matsushita
Electronic), Sanyo or Sony CR2025; use of another battery
may present a risk of fire or explosion.

n Dispose of used battery properly.
n Keep away from children.
n Do not disassemble and do not dispose of in fire.

S-VIDEO cable

DC cord

VIDEO/AUDIO cable

(AC Charger Station

to TV or VCR,

RCA plug 4 RCA plug)

AC Charger Station

AA-V60U

Editing cable

(ø3.5 mini-plug, 2 poles)

Remote control unit

RM-V712U

Lithium battery CR2025

(for remote control unit)

Thank you for purchasing the JVC Station Kit.

•This product should be used with JVC Digital Video Cameras only.

•Before using, be sure to read these instructions as well as your Digital Video Camera's
Instruction manual carefully.

TW

Provided accessories

Power

Operating
temperature

Transmission range
Dimensions

Weight

DC 3 V
(CR2025 Lithium battery x 1)

0˚C to 40˚C (32˚F to 104˚F)

Approx. 5 m
54 mm (W) x 86 mm (H) x 12 mm (D)

(2-3/16" x 3-7/16" x 1/2")
Approx. 26 g (0.06 lbs)

RM-V712U Remote Control Unit

Power

Power consumption
Power output

Operating
temperature

Dimensions

Weight
Charging time for

BN-V607U Battery
pack (based on
room temperature
of 10˚C to 35˚C)

U.S.A. and Canada:
AC 120 V`, 60 Hz
Other countries:
AC 110 to 240 V`, 50/60 Hz

20 W
DC 7.2 V , 0.77 A (charge)

DV 6.3 V , 1.8 A (VTR)
0˚C to 40˚C (32˚F to 104˚F) (10˚C to

35˚C (50˚F to 95˚F) when charging)
80 mm (W) x 39 mm (H) x 146 mm (D)

(3-3/16" x 1-9/16" x 5-3/4")
Approx. 360 g (0.8 lbs)
Approx. 90 min.

AA-V60U AC Charger Station

U

0598HOV*UN*SW
LYT0215-001A

This Class B digital apparatus complies with Canadian
ICES-003

Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.

NOTE:

The rating plate (Serial number plate) of the AC Charger
Station is on the bottom of the unit.

NOTES:

●

If you connect the camcorder’s DC cord to the AC Charger Station during
battery charging, power is supplied to the camcorder and charging stops.

●

When using the AC Charger Station, be sure to use the supplied power
cord only.

●

When charging the Battery Pack for the first time or after a long storage
period, the Charger Indicator may not light. In this case, remove the
Battery Pack from the AC Charger Station, then try charging again.

●

Since the AC Charger Station processes electricity internally, it becomes
warm during use. Be sure to use it only in well-ventilated areas.

●

If the battery operation time remains extremely short even after having
been fully charged, the battery is worn out and needs to be replaced.
Please purchase a new one.

1

Plug the AC Charger Station’s power cord into an AC outlet. The power
lamp comes on.

2

Attach while making sure the marks are facing down and aligned
with the corresponding marks on the AC Charger Station.

•The Charger Indicator begins blinking to indicate charging has started.

3

When the charger indicator stops blinking but stays lit, charging is
finished.

4

Slide the battery in the direction of the arrow and lift off.

•Remember to unplug the AC Charger Station’s power cord from the AC
outlet.

ATTACH

To AC outlet

Power cord

Charger indicator

Power lamp

DETACH

Battery pack

AC Charger Station
AA-V60U

DC OUT jack

Power cord

Battery Approximate charging time

BN-V607U (optional) 90 min.

BN-V615U (optional) 180 min.

NOTE:

Since the AC Charger Station processes electricity internally, it becomes
warm during use. Be sure to use it only in well-ventilated areas.

Charging The Battery Pack

The battery pack has not been charged at the factory. Before using it, be sure to charge it with the AC Charger Station.

Indoor Use

When using the camcorder indoors, you can use the AC Charger Station instead of a battery.

1

Insert the coupler of the provided DC cord into the camcorder.

2

Connect the DC cord to the AC Charger Station’s DC OUT jack.

3

Plug the AC Charger Station’s power cord into an AC outlet.

Power lamp

When power is supplied,
the power lamp lights.

AC Charger Station
AA-V60U

Slide down the open switch.

To AC outlet

Power cord

DC cord

To DC OUT jack

Coupler

Remove.

Core filter

Refer to your Digital Video Camera’s Instruction manual for more
information.