JVC VN-SE400U User Manual

External Device Controller Package

VN-SE400U

User’s Guide

<Precautions>

It is strictly prohibited to duplicate any part or the whole of this manual.

The contents of this manual may be subject to change without notice.

Take care not to violate the copyright of other persons.

JVC will not assume liabilities for damages incurred as a result of any error that occurs in this document.

V2.0.0

External Device Controller Package [VN-SE400U] is the software that provides you

some controllers for the devices connected with the Multi Viewer Software [VN-S400U]

through the encoders.

This software is exclusively for the users of the Multi Viewer Software [VN-S400U].

Please read this User’s Guide with referring to the User’s Guide of the Multi Viewer Soft-

ware [VN-S400U] and the respective instructions of the connected devices.

CONTENTS

1. TK-C655 Series Controller......................................................................3

2. TK-C1460U Series Controller .................................................................5

3. VR-510U Controller ................................................................................6

4. RM-P2580U(A) Controller....................................................................... 7

2

1. TK-C655 Series Controller

TK-S576 Series Controller controls the following models.

TK-C655E

TK-C676E

< Position tab >

Position Selecting Box

Position Shift button (forward)

Position Shift button (rewind)

[Position Memory]

Clicking on one of the buttons points the camera to the

previously registered position. Click on the Save tab for

registering positions.Up to 8 positions can be registered

in the memory.

[PAN/TILT Adjustment buttons]

Arrow buttons are provided to control the pan/tilt posi-

tion of the camera.

The camera position is returned to the home position by

[HOME] button.

Position Memory

[AUTO PAN]

The camera stars to pan itself automatically by click.

[Position Selecting Box]

Select one position to make the camera to point to the

previously registered position. (From POS1 to POS99,

or HOME)

[Position Shift button (forward)]

Used to set the number of registered position forward

per click, and the camera position is adjusted as the

position.(The position number unregistered any position

is skipped.)

The display of the Position Selecting box does not

change if the position is changed by this button.

PAN/TILT Adfustment buttons

[SPEED] (For PAN/TILT Adjustment)

Set the speed of the panning/tilting.

(1 is the slowest setting, and 8 is the fastest setting.)

[IRIS]

Adjust the camera iris.

CLOSE: Close the iris.

OPEN: Open the iris.

[FOCUS]

Adjust the focusing.

NEAR: Focus on the near subjects.

FAR: Focus on the far subjects.

AUTO FOCUS: Adjust the focusing automatically.

[ZOOM]

Adjust the zoom ratio.

WIDE: Wide angle

TELE: Tele angle

[Position Shift button (rewind)]

Used to rewind the number of registered position per

click, and the camera position is adjusted as the

position.(The position number unregistered any position

is skipped.)

The display of the Position Selecting box does not

change if the position is changed by this button.

[SPEED] (For ZOOM and FOCUS)

Set the speed of FOCUS and ZOOM.

(1 is the slowest setting, and 4 is the fastest setting.)

3