JVC VN-C3 Mounting Manual
1/1
S0L0006-01MM
V.NET Device Standard Mounting Manual
Model Name: VN-C3 (a sample procedure for mounting the VN-C3 to a wall using the VN-BK30
)
Dimensions
Specifications
Mass: 0.73 kg
: 0,27 kg
(
Main body of the camera
)
(
Fixtures
)
Total Mass: 1.0 kg
Materials
Screws
Quantity
4
M4 small screws or
M4 hexagon head bolts and nuts
VN-C3 Sample Mounting Procedure
In order to mount this model perform the steps detailed below (using the mounting kit VN-BK31
)
1. Secure the wall-mounting bracket to the wall using the
mounting screws M4 (4).
2. Using screws of M4 or larger or hexagon head bolts,
fix the fall-prevention wire to a secure place (See. Notes 2).
3. Connect both the signal and power supply cables to the main body of the camera.
4. After connecting the camera to the appropriate cables,
secure it to the wall-mounting bracket by using the provided screws M3 x 8 (3).
Wall-mounting bracket
Size of the mounting hole
KOBAN box
Notes
1. Make sure that the wall is strong enough to endure more than 10 times the weight of the camera and the mounting kit.
If the wall is judged not to be strong enough, make sure that some kind of reinforcement is used.
2. We recommend the use of a fall-prevention wire. Take the entire weight into consideration and use a wire strong
enough to withstand 10 times the weight of the camera and the mounting kit.
contact the JVC Optical Communications Division.
For further information,
*Not included in this package
Bracket mounting screws (M4, 4 places
)
(
M3 x 8) at 3 locations
Camera mounting screws
Front of the camera
Mounting side of the wall
Locations where the cables exit
(
2 ways
)
Fall-prevention wire
*Not included in this package
Situations in which it is possible to drill holes in a wall
Main body of the camera
(
VN-C3
)
Positions of the screw holes (4 locations
)
105
104
147.5
95
25
185.5
160.5
105
83.5
17.25
34.5
50
φ104
φ20(The hole which penetrates the wall for a cable pass.
)
Loading...