JVC TK-S241U User Manual

R
1/3-INCH CCD B/W CAMERA
TK-S241U
High-Sensitivity and Quality B/W Surveillance System (AC 24 V/DC 12 V)
Cost Efficient and Easy-To-Install Surveillance Camera
Delivering High-Sensitivity , Distortion-Free Pictures
JVC’s high-sensitivity TK-S241U captures sharp pictures with no residual images or distortion
at a high sensitivity of 0.095 lux. It has genlock, horizontal dual-edge contour correction, and
is resistant to the effects of electric and magnetic fields. The TK-S241U is easy to install
as a single camera or as part of an existing system. Such powerful features make the TK-S241U
an exceptionally economic solution for a wide range of surveillance applications.
With a high-sensitivity of 0.095 lux, the TK-S241U delivers high picture quality under even the poorest light conditions.
Horizontal dual-edge contour correction ensures high­quality, distortion-free pictures under all shooting conditions.
The camera accepts AC 24 V or DC 12 V for easy installation in various systems.
Built-in genlock opens up a wide range of application possibilities by allowing the camera to be connected to most currently available video equipment.
Shown with optional lens.
The TK-S241U is suitable for indoor and outdoor applications using video iris with built-in EE amplifier or DC iris lens.
The automatic electronic shutter continuously adjusts the shutter speed to give the correct exposure even when a manual iris or a lens without an iris is used.
Built-in back light compensation function improves image quality when shooting back-lit subjects.
Adjustable lens mount and back-focus enable CS-mount or C-mount lenses to be attached to the camera.
R
JVC PROFESSIONAL PRODUCTS COMPANY
DIVISION OF US JVC CORP.
41 Slater Drive, Elmwood Park, N.J. 07407
TEL: (201) 794-3900, 1-800-526-5308
FAX: (201) 523-2077
JVC CANADA INC.
21 Finchdene Square, Scarborough, Ontario M1X 1A7
TEL: (416) 293-1311 FAX: (416) 293-8208
Internet Web Site http://www.jvcpro.com/
70
55
67
U1
115
126
1/4-20 UNC
23.5
55.3
!0
!1
!2 !3
!5!4
o
!8
!7 !6
w
e
y
r
t
q
Controls, Connectors and Indicators
iu
Specifications Dimensions
qCamera mounting screw holes (1/4") wCamera mounting bracket fixing screws eCamera mounting bracket rLens mount t[BF LOCK] Back focus locking screw yBack focus adjustment ring u[DC IRIS] DC iris connector i[LEVEL] Sensitivity adjustment volume o[DC 12 V/AC 24 V] Power input terminal !0[VIDEO IRIS] Video iris terminal !1[POWER] Power lamp !2[SYNC IN] Sync signal input connector !3[VIDEO OUT] Video signal output connector !4[LL COARSE] Phase coarse select !5[BLC] Back light compensation switch !6[AES] Automatic electronic shutter switch !7[SYNC] Synchronization select switch !8[PHASE] Line lock synchronization phase
adjustment
Image device 1/3" interline-transfer CCD Effective pixels 250,000 (512 (H) x 492 (V)) Sync system External, Internal and Line lock
Scanning frequency (H) 15.734 kHz, (V) 59.94 Hz Horizontal resolution 380 TV lines Video S/N 50 dB (AGC OFF) Minimum required illumination 0.095 lux (F1.2) Automatic electronic shutter 1:1670 (1/60 sec. to 1/100,000 sec.) Lens mount CS/C mount Power requirement AC 24 V (60 Hz), DC 12 V Power consumption 2.5 W (AC 24V)
Operating temperature range 14°F to 122°F (10°C to 50°C)
Weight 1.13 lbs (510 g)
(60 Hz regions only)
190 mA (AC 24V) 180 mA (DC 12V)
32°F to 104°F (0°C to 40°C ) (recommended)
DISTRIBUTED BY
Unit: inches (mm)
Design and specifications subject to change without notice.
Printed in Japan
KCN-1722 CETKS241UKN702
Loading...