JVC TK-C9201EG, TK-C9301EG, TK-C9300U, TK-C9300E, TK-C9200U User Manual

COLOR VIDEO CAMERA

For Customer Use:

Enter below the Serial No. which is located on the
body. Retain this information for future reference.

Model No. TK-C9200U,TK-C9200E,TK-C9201EG

Serial No.

TK-C9300U,TK-C9300E,TK-C9301EG

TK-C9200U
TK-C9200E
TK-C9201EG
TK-C9300U
TK-C9300E
TK-C9301EG

.

INSTRUCTIONS

LST0984-001A

Introduction

Contents

Introduction

Contents ............................................................................................................. 2

Features ............................................................................................................. 3

Operating Precautions ....................................................................................... 4

Connection/Installation

Mounting the Lens ............................................................................................. 6

Connection ......................................................................................................... 7

Mounting the Camera ........................................................................................ 9

Setting/Adjustment

Switch Settings ................................................................................................ 11

Adjusting the Back Focus ................................................................................ 12

Fine-tuning the Focus ...................................................................................... 13

Adjusting the Auto White Balance .................................................................... 14

Others

Specifications ................................................................................................... 15

2

Introduction

Thank you for purchasing this product.
Before use, please read this "INSTRUCTIONS" and the information materials
included to ensure proper use of this product.
The instructions in this manual are for TK-C9200U/TK-C9200E/TK-C9201EG/TK­C9300U/TK-C9300E/TK-C9301EG.

Features

v

Wide dynamic range (WIDE-D) function (TK-C9300U/TK-C9300E/TK-C9301EG
only)

v

DAY/NIGHT surveillance with auto IR cut filter on/off (Color/B&W shooting)
(TK-C9300U/TK-C9300E/TK-C9301EG)
Easy DAY/NIGHT function (TK-C9200U/TK-C9200E/TK-C9201EG)

v

3D noise reduction (3DNR)

v

4 areas privacy mask

v

Built-in display mode (CRT or LCD selectable)

How to read this manual

Conventions and symbols

: Indicates operating precautions.

Note

: Indicates reference data regarding limitations on functions, usage

Memo

and the like.

A

: Indicates a reference page or item.

Contents of this manual

v

JVC holds the copyright to this manual. Any part or all of this manual may not
be reproduced without prior consent from the company.

v

Product names of other companies described in this manual are trademarks
or registered trademarks of the respective companies. Symbols such as E, T,
and R are omitted in this manual.

v

Design, specifications and other contents described in this manual are
subject to change for improvements without prior notice.

3

Introduction

Operating Precautions

m

Storage and Location of Use

v

Do not install the camera in the following places.

- In a place exposed to rain or moisture.

- In a place with vapor or oil, for example in a kitchen.

- When the ambient temperature rises above or falls below the acceptable
range (from -10 f to 50 f)

- In a place at which corrosive gases are emitted.

- Near a source of radiation, X-rays, strong radio waves or magnetism.

- In a place subject to vibration.

- In a place with excessive dirt.

v

Using this unit in the vicinity of the transmitting antenna of a radio or TV,
devices that emit strong electromagnetic waves such as a transformer or motor,
or wireless devices such as a transistor or mobile phone may give rise to noises
in the image and changes in its color.

v

This camera has been designed for indoor use. When using it outdoors, it is
necessary to use an outdoor camera housing (optional).

m

Maintenance

v

Wipe the camera with a dry, soft cloth to remove any dirt.
Do not use benzene or thinner to wipe the camera. Doing so may melt the
surface or cause it to fog. For tough stains, wipe with a neutral detergent diluted
with water, followed by wiping with a dry cloth.

m

Energy Conservation

v

When the camera is not in use for a long time, turn off the power for safety and
energy conservation reasons.

m

Copyright Protection

v

With the exception of the user being the copyright holder or when permission
such as for duplication has been granted by the copyright holder, permission is
required in principle for the duplication, modification, or transmission of
copyrighted material.

v

Unauthorized duplication, modification, or transmission of copyrighted material
may constitute a copyright infringement, and the user may be liable to
compensate for any damages. When using copyrighted material, be sure to
check the license agreement of the copyrighted material thoroughly.

v

When rights or rights holders are involved with regard to the targeted
duplicating subject, permission may be required for shooting or using
(processing) it. Be sure to check the licensing conditions thoroughly.

m

Disclaimer

v

Motion detection is not a feature to prevent theft or fire. We do not accept
liability for any damages that may occur.

4

Introduction

v

We will not be responsible for any inconveniences or disturbances caused in
the event of privacy invasion as a result of camera footages of this product.

m

Others

v

When using this camera with [AGC] set to "MID" or "HIGH", the sensitivity
increases automatically for dark images and the screen may appear grainy, but
this is not a malfunction.

v

When the DAY/NIGHT switch is set to "AUTO", the image turns black-and-white
in a dark location. As the sensitivity level is increased in this case, the screen
may appear grainy and more white spots may appear. When switching between
modes, the brighter area on the screen is emphasized and visibility may be
reduced. However, this is not a malfunction.

v

Before mounting the camera to the mounting location, attach the lens to be
used on the camera and check the back focus.

v

When shooting an extremely bright object (e.g. lamp), the image on the screen
may have white vertical tailings (smear) or expansion (blooming) may appear
around it. This is a characteristic of the CCD and not a malfunction.

v

When the white balance of this camera is set to "ATW-N" or "ATW-W" and
depending on the conditions of the object, the color tone may differ slightly from
the actual color due to the principle of the automatic tracking white balance
circuit. This is not a malfunction.

v

When this camera is used under high temperatures, vertical stripes may appear
on the screen. This is a characteristic of the CCD and not a malfunction.

v

When this camera is moved from a cold to warm place, condensation may
occur and the camera may not work. In this case, leave the camera under room
temperature for about one hour before turning on the power.

v

When the power supply voltage is momentarily disrupted or drops due to
lightning, turning on the air-conditioner or the like, image distortion or noise may
occur.

v

When the power supply voltage of the camera drops, the input protection circuit
inside the camera operates, and the camera may be turned off. Make use of a
voltage rating within 510 % for the camera’s power supply voltage.

v

The 3D noise reduction function of this camera may result in afterimage of a
moving subject. Afterimage is more likely to occur when using the camera with
[DNR LEVEL] set to "HIGH". This is not a malfunction.

5