JVC SP-THC40S, XV-THC40, SP-THC60C, SP-THC60S, SP-THC60F User Manual

...

JVC

DVD DIGITAL THEATER SYSTEM

TH-C60

Consists of XV-THC60, SP-PWC60, SP-THC60F, SP-THC60C and SP-THC60S

TH-C50

Consists of XV-THC50, SP-PWC50, SP-THC60F, SP-THC60C and SP-THC50S

TH-C40

Consists of XV-THC40, SP-PWC40, SP-THC40F, SP-THC40C and SP-THC40S

DIGITAL

_ DIGITAL

VIDEO

_'_ _ _ H.--Irnl

SURROUND U LT I_

MPEG-4

ASF PLAYBACK

_lr _mWIIIF _ hl|Vfl

Anzr_umm mwAmv Digital DirectProgressiveScan

INSTRUCTIONS

For Customer Use:

Enter below the Model No. and Serial No. which are located either on the rear,

bottom or side of the cabinet. Retain this information for future reference.

Model No. Serial No.

LVT1504-003A

[a]

Warnings,CautionsandOthers/Misesengarde,pr6cautionset

indicationsdiverses

For U.S.A.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to

alert the user to the presence of uninsulated

"dangerous voltage" within the product's

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons. The exclamation point within an equilateral

triangle is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's

attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable

ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

CAUTION ATTENTION

Changes or modifications not approved by JVC Des changements ou modifications non approu_,_s could void the user's authority to operate the par JVC pourront invalider l'autoritd de l'utilisateur

equipment. "topdrer cet appareil.

For Canada

THIS DIGITAL APPARATUS DOES NOT

EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL

APPARATUS AS SET OUT IN THE INTERFERENCE-CAUSING EQUIPMENT

STANDARD ENTITLED "DIGITAL APPARATUS," ICES-003 OF THE

DEPARTMENT OF COMMUNICATIONS.

CAUTION!

To avoid personal injury or accidentally dropping the unit, have

two persons unpack, carry, and install the unit.

Pour le Canada

CET APPAREIL NUMERIQUE RESPECTE LES LIMITES DE BRUITS RADIOELECTRIQUES

APPLICABLES AUX APPAREILS NUMIRIQUES DE CLASSE B PRESCRITES DANS LA NORME

SUR LE MATERIEL BROUILLEUR: "APPAREILS NUMERIQUES", NMB-003

EDICTEE PAR LE MINISTRE DES COMMUNICATIONS.

ATTENTION!

Pour _viter tonte blessure personnelle ou toute chute accidentelle de

l'appareil, cehfi-ci doit 4tre ddballd, transportd et installd par deux personnes.

G-1

TH-C60:39 kg/86 Ibs TH-C50:33 kg/73 Ibs

TH-C40:24 kg/53 Ibs

TH-C60:39 k_86 Ibs TH-C50:33 k_73 Ibs

TH-C40:24 k_53 Ibs

Warnings, Cautions and Others/IVlises en garde, pr6cautions et indications diverses

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. OAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all

servicing to qualified service personnel.

3. CAUTION: Visible and/or invisible class IM laser radiation when open. Do not view directly

with optical instruments.

CAUTION

To reduce tile risk of electrical shocks, fire, etc.:

1. Do not remove screws, covers or cabinet.

2. Do not expose this appliance to rain or moisture.

CAUTION - (3/I button!

(XV-THC60/XV-THC50/

XV-THC40)

Disconnect the mains plug to shut the power oft"

completely (the STANDBY lamp goes off). When

installing the apparatus, ensure that the plug is

easily accessible. The d)/I button in any position does not disconnect

the mains line.

• When the system is on standby, the STANDBY

lamp lights red.

• When the system is turned on, the STANDBY

lamp goes oft'.

The power can be remote controlled.

IMPORTANT POUR PRODUITS LASER

1. PRODUIT LASER CLASSE 1

2. ATTENTION: N'ouvrez pas le couvercle

supdrieur. II n'y a aucune pibce r@arable par l'ntilisateur 5 l'intdrieur de l'appareil; confiez

toute r@aration "_un personnel qualifid.

3. ATTENTION: Rayonnement laser visible et/ou

invisible de classe IM une t_is ouvert. Ne pas regarder directement avec des instruments

optiques.

ATTENTION

Afin d'dviter tout risque d'dlectrocution, d'incendie, etc.:

1. Ne pas enlever les vis ni les panneaux et ne pas ouvrir le coffret de l'appareil.

2. Ne pas exposer l'appareil "t la pluie ni "t l'humidit&

ATTENTION - Touche &/I

(XV-THC60/XV-THC50/ XV-THC40)

Ddconnectez la fiche d'alimentation secteur pour couper l'alimentation complbtement (le tdmoin

STANDBY s'dteint). Lors de l'installation de l'appareil, assurez-vous que la fiche soit facilement

accessible. La touche Oil, clans n'importe quelle position, ne ddconnecte pas le systbme dn secteur.

• Quand le systbme est en attente, le tdmoin STANDBY est allured en rouge.

• Quand le systbme est sous tension, le tdmoin STANDBY s'&eint.

L'alimentation ne peut pas etre tdldcommandde.

CAUTION

(SP-PWC60/SP-PWC50/

SP-PWC40)

The power supply to the subwoofer is linked to the center unit. The POWER ON lamp on the

subwoofer lights green when the power is turned on.

[European Union only]

[Union europeenne seulement]

ATTENTION

(SP-PWC60/SP-PWC50/

SP-PWC40)

L'alimentation au caisson d'extr_mes graves passe par l'unitd centrale. Le tdmoin POWER ON vert sur

le caisson d'extr_mes graves s'allume quand le systbme est alhnnd.

G-2

Tableof contents

Introduction .................................................... 2

Notes on handling ..................................................................... 2

Supplied accessories .................................................................. 2

About discs ...................................................... 3

Playable disc types ..................................................................... 3

Playable file types ....................................................................... 4

Description of parts and controls .................. 5

Connections ..................................................... 8

Connecting the FM and AM antennas ................................... 8

Connecting the satellite (front, center, surround) speakers ...... 9

Speaker layout .......................................................................... 12

Connecting a TV ...................................................................... 12

Connecting the powered subwoofer ..................................... 13

Connecting to an analog component ................................... 13

Connecting to a digital component ...................................... 13

Connecting a USB mass storage class device ....................... 13

Connecting the power cord .................................................... 13

Operating external components with the

remote control .............................................. 14

Operating the TV ..................................................................... 14

Operating the DBS tuner or CATV converter .................... 15

Operating the VCR .................................................................. 15

Basic operations ............................................ 16

Turning the system on/off ...................................................... 16

Selecting the source to play .................................................... 17

Adjusting the volume [VOLUME] ....................................... 17

Listening with headphones (not supplied) .......................... 17

Turning offthe sound temporarily [MUTING] ................. 17

Adjusting the brightness of the indications [DIMMER] ... 17

Sleep Timer [SLEEP] ............................................................... 18

Adjusting the output level of the subwoofer and speakers ...... 18

Adjusting the sound ................................................................ 18

Changing the scan mode ........................................................ 18

Playback ........................................................ 19

Basic playback ........................................................................... 19

One Touch Replay ................................................................... 21

Fast-forward/fhst-reverse search ............................................ 21

Skip to the beginning of a desired selection ......................... 22

Skipping at about 5-minute intervals .................................... 22

Locating a desired title/group using number buttons ........ 22

Advanced operations ................................... 23

Using the surround mode ....................................................... 23

Using the on-screen bar .......................................................... 25

Playing from a specified position on a disc .......................... 26

Using the file control display .................................................. 27

Resume Playback ...................................................................... 28

Selecting a view angle .............................................................. 28

Selecting the subtitle ................................................................ 28

Selecting the audio ................................................................... 29

Special picture playback .......................................................... 29

Program Playback .................................................................... 30

Random Playback .................................................................... 31

Repeat Playback ........................................................................ 31

Tray lock .................................................................................... 32

Sound and other settings ......................................................... 32

Setting DVD preferences ............................. 33

Using the setup menus ............................................................ 33

Menu description ..................................................................... 33

Tuner operations .......................................... 36

Manual tuning .......................................................................... 36

Preset tuning ............................................................................. 37

Selecting the FM reception mode .......................................... 37

Reducing the noise of AM broadcast .................................... 37

AV COMPU LINK remote control system .... 38

References .................................................... 39

Maintenance ............................................................................. 39

Troubleshooting ....................................................................... 39

Specifications ............................................................................40

Introduction

• Importantcautions

Installation of the system

• Select a place which is level, dry and neither too hot nor too cold; between 5°C and 35°C (23°F and 95°F).

• Leave sufficient distance between the system and the TV.

• Do not use the system in a place subject to vibration.

Power cord

• Do not handle the power cord with wet hands.

• A small amount of power is ahvays consumed while the power cord is connected to the wall outlet (center unit only).

• When unplugging the power cord from the wall outlet, always pull on the plug, not the power cord.

To prevent malfunctions of the system

• There are no user-serviceable parts inside. If anything goes wrong, unplug the power cord and consult your dealer.

• Do not insert any metallic object into the system.

• Do not use any non-standard shape disc (like a heart, flower or credit card, etc.) available on the market, because it may damage

the system.

• Do not use a disc with tape, stickers, or paste on it, because it may damage the system.

• Safetyprecautions

Avoid moisture, water and dust

Do not place the system in moist or dusty places.

Avoid high temperatures

Do not expose the system to direct sunlight and do not place it near a heating device.

When you are away

When away on travel or f\_r other reasons fur an extended period of time, disconnect the power cord plugs from the wall outlet.

Do not block the vents

Blocking the vents may damage the system.

Care of the cabinet

When cleaning the system, use a soft cloth and fbllow the relevant instructions on the use of chemically-coated cloths. Do not use

benzene, thinner or other organic solvents including disinfectants. These may cause deformation or discoloring.

If water gets inside the system

Turn the system off and disconnect the power cord plug from the wall outlet, then call the store where you made your purchase. Using

the system in this condition may cause a fire or electrical shock.

Label sticker

Paste

Note about copyright laws

Check the copyright laws in your country befure recording from the discs, Recording of copyrighted material may infringe copyright

hnvs.

Note about copyguard system

The discs are protected by copyguard system. When _u connect the system to your VCR directly, the copyguard system activates and

the picture may not be played back correctly.

Check to be sure you have all of the supplied accessories. The number in parentheses is the quantity of the pieces supplied.

If awthing is missing, contact your dealer immediateb:

Remote control (1) Batteries (2)

FM antenna (1) AM loop antenna (1) Power cord (1)

System cord (1) Composite video cord (1)

Speaker cords (fur TH-C60/TH-C50) 4 m (13.2 ft): For satellite (front left/right) and center speakers (3)

I0 m (32.8 ft): For satellite speakers (surround left/right) (2)

• Screws TH-C60: M5 x 40 mm (MS x 1-5/8 inches) (4) M4 x 20 mm (M4 x 13/16 inches) (8)

TH-CS0: M5 x 40 mm (M5 x 1-5/8 inches) (2)

M4 x 20 mm (M4 x 13/16 inches) (4)

• Speaker cord clamps TH-C60 (4)

TH-CS0 (2)

Aboutdiscs

This system has been designed to play back the following discs:

V I D E O DIGITAL AUDIO

VIdeogD

The _'in the list below shows available disc types and recording formats.

DVD Video -- _,/ _,/ VCD/SVCD x' Audio CD _i

MP3 x' _'_2 WMA _i _'×.2

JPEG _i _'_2 ASF x' _'_2

MPEG-2 \,x.3 \%2

MPEG-1 \,x3 \'x2

DivX _i _i×.2

_1 This system can play finalized discs only.

_2 Recorded with UDF Bridge format. _3 This system may not be able to play back a file if the file size is

too large.

\,_.2

Notes on DVD-R and DVD-RW

• This system does not support "multi-border" disc,

• This system does not support a disc recorded with DVD VR format.

Notes on CD-R and CD-RW

• This system can play CD-Rs or CD-RWs recorded with IS() 9660 format.

• This system supports "multi-session" discs (up to 12 sessions).

• This system cannot play "packet write" discs.

Region code of DVD VIDEO

DVD VIDEO players and DVD VIDE() discs have their own Region Code nmnbers. This system can play back DVD VIDEO

discs whose Region Code numbers include the system's Region Code, which is indicated on the rear panel.

Example of playable DVD:

Ifa DVD with an improper Region Code number is loaded, "REGION CODE ERROR!" appears on the TV screen and playback

cannot start,

Some discs may not be played back because of their disc characteristics, recording conditions, or damage or stain on them.

Unplayable discs

DVD-ROM, DVD-RAM, CD-I (CD-I Ready), Photo CD, SACD, etc. Playing back these discs will generate noise and damage the

speakers.

• It is possible to play back finalized +R/+RW (DVD Video Format

only) discs. "DVD" lights on the display panel when a +R/+RW disc is loaded.

• This system accommodates the NTSC system, and also can play discs recorded with PAL system. Note that an PAL video signal on

a disc is converted to the NTSC signal and output.

• The Non-DVD side ofa "DualDisc" does not comply with the "Compact Disc Digital Audio" standard. Therefbre, the use of

Non-DVD side of a D ualDisc on this product may not be recommended.

• On some DVD VIDEOs, VCDs or SVCDs, their actu,'fl operation may he different from what is explained in this manual. This is due to the disc programming and disc

structure, not a malfunction of this system.

DVD Logo is a trademark of D\ D Format/Logo Licensing Corporation.

About discs

For all playable files

• The system can only recognize and play files with one of the lbllowing extensions, which can be in any combination of upper and lower case;

MP3: ".MP3", ".rap3" WMA: ".WMA", ".wmd'

IPEG: ".IPG", ".IPEG", ".jpg", ".jpeg" ASF: ".ASF", ".asf"

MPEG-2/MPEG- 1: ".MPG', ".MPEG", ".mpg", Lmpeg" DivX: ".DIVX', ".DIV", ".diwx", ".div", and ".AVI', ".avi"

• The system recognizes up to 150 tracks (files) per group, 99 groups per disc/device, and the total number of the tracks (files)

that the system can play is 4000.

• Some files may not be played back normally because of their disc characteristics or recording conditions.

• MP3/WMA!IPEG/ASF/MPEG-2/MPEG- 1/DNX files require a longer readout time. (It differs due to the complexity of the

directory/file configuration.)

• If different kinds of files are mixed, set the FILE TYPE setting in the PICTURE menu to the appropriate setting for the data to be

read ("AUDIO", "STILL PICTURE" or "VIDEO"). (See page 34.)

For MP3/WMA files

• The system supports MP3/WMA files recorded with a bit rate of 32 320 kbps and a sampling frequency of 16 kHz, 22.05 kHz, 24 kHz _, 32 kHz, 44.1 kHz, or 48 kHz.

• If the track infbrmation (track title, artist, and album name, etc.) is recorded, it appears in the file control display on the TV screen.

(See page 27.)

• We recommend to record each piece of material (song) at a sample rate of 44.1 kHz and at a data transfer rate of

128 (96 _) kbps.

For WMA only

For JPEG files

• We recommend to record a file at 640 x 480 resolution. (Ifa file has been recorded at a resolution of more than 640 x 480, it will

take a longer time to be displayed.)

• This system can only play baseline JPEG files.

For ASF files

• The systenl supports the types of the advanced simple profile as MPEG-4 files (MPEG-4 ASF).

• The system supports MPEG-4 files with the fl_llowing conditions: File format: ASF

Visual profile: MPEG-4 SP (Simple Profile) Audio CODEC: G.726

Max. picture size: 352 x 288 (CIF) Max. bit rate: 384 kbps

For MPEG-2/MPEG-1 files

• The stream format should confl_rm to MPEG systenl/program stream.

• 720 x 576 pixels (25 fps)/720 x 480 pixels (30 fps) is recommended fl_r the highest resolution.

• This system also supports the resolutions of 352 x 576/480 x 576/ 352 x 288 pixels (25 fps) and 352 x 480/480 x 480/352 x 240 pixels

(30 fps).

• The file [brmat should be MP_a)ML (Main Profile at Main Level)/ SP@ML (Simple Profile at Main Level)/MP@LL (Main Profile at

Low Level).

• Audio streams should confurm to MPEG1 Audio Layer-2 or MPEG2 Audio Layer-2.

For DivX files

• The system supports DivX 6.x, 5.x, 4.x and 3.11.

• The system supports DivX files whose resolution is 720 x 480 pixels or less (30 fps), and 720 x 576 pixels or less (25 fps).

• Audio stream should conf\_rm to Dolby Digital (including multi channel) or MPEGI Audio Layer-3 (MP3).

• The system does not support GMC (Global Motion Compression).

• The file encoded in the interlaced scanning mode may not be played back correctl)c

• The system has its own Registration Code fbr DivX playback.

• If necessary, you can confirm the Registration Code of your system using the OTHERS menu. (See page 35.)

• This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by Macrovision, and is intended fbr home and other limited

viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

• USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED, EXCEPT FOR USE BY A CONSUMER

ENGAGING IN PERSONAL AND NON-COMMERCIAL ACTIVITIES.

• DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license.

• Official DivX ®Ultra Certified product

• Plays all versions ofDivX ®video (including DivX ®6) with enhanced playback of DivX ® media files and the DivX ® Media

Format

Descriptionof partsandcontrols

Frontpanel(centerunit)

The numbers in the figures indicate the pages where the details of the parts are described.

Display window

24 36 37 20 24

t5t-,I

141-4

1314

1214

Rearpanel (center unit)

18 20 37 36 31 3I, 32

76 76 79 73 77

I\'2 \'#iJ

38 72

Descriptionof partsandcontrols

Poweredsubwoofer

SP-PWC60/SP-PWC50

SP-PWC40

POWER ON lamp: 15

Front

._ POWER ON

"-- ".... _l lamp: 76

Front Rear

Power cord: 13

Rear

Power cord: 13

NOTE

• For safety reasons, always ensure that there is sufficient space behind

the powered subwoof_r.

Do not block the ventilation openings to allow proper air circulation by the cooling fan.

Descriptionof partsandcontrols

Remotecontrol

17--

_C_ DBsCZ?

19--

l _ DISC 5

Number

buttons: 22 --

MEMORY

EZ_

_l -

voR jv

@ #lsc31} TV

T ,6

B 15

_ 74, 75

14-36

Putting batteries in the remote control

R03 (UM-4)/AAA (24F) type dry-ceil batteries (supplied)

If the range or effectiveness of the remote control decreases, replace both batteries.

CAUTION

• Do not expose batteries to heat or flame.

Operating the systemfrom the remote control

Aim the remote control directly to the front panel of the center unit.

• Do not block the remote sensor.

Connections [ Do not connect the power cord until all other connections have been made. ]

If reception is poor

Center unit

• AMloopantenna

Setting up supplied AM loop antenna

_, If the antenna cord is covered with the insulation

//_ coat, twist and pull the insulation coat off andremove.

Connecting AM loop antenna

Center unit

AM loop antenna_ c_

Outdoor single vinyl-covered wire antenna

(not supplied)

• FMantenna

Center unit

_,_,_ _xtend the supplied FM antenna

/ hurizontallv.

If reception is poor

Center unit

fM¢i

FM antenna (supplied)

Outdoor FMantenna (not

_-- Antenna cord

• Turn the loop antenna until you have the best reception during AM broadcast program reception.

NOTE

• Make sure the antenna conductors do not touch any other terminals, connecting cords or power cords. This could cause poor reception.

,¢-<

Standard type (75 f_ coaxial) connector

NOTE

• We recommend that you use coaxial cable [-;ortbe FM antenna as it is

well-shielded against interf_'rence.

Outdoor FM antenna cord (not

supplied) T

supplied)

Connections [ Donot connectthe powercorduntilallother connectionshavebeenmade. ]

Before assembling --

• Prepare a Phillips screwdriver (not supplied).

• Take care not to drop any component part while assembling; otherwise, it may cause damage to the floor or injur_,c

• Assemblingthespeakers-- TH-C60_TH-CSO

• For TH-C60: Assemble front speakers and surround speakers.

• For TH-C50: Assemble front speakers. For the surround speakers of TH-C50, see "Connecting the

surround speakers -- TH-C50". (See page 10.)

ForTH-C60

_ Stand

I _,,, (2) Screw MS x 40 mm/M5 x 1-5/8

'_"g'peaker

I \42 ch°s/supp'°dl

2 stand:

Front speaker Surround

(SP-THC6OF)(2) speaker

(SP-THC60S) (2)

• Check file model name of each speaker from the label on the rear to locate eacll speaker correctly.

For TH-CSO

Stand (4)

Base plate (4)

@: Use these screws (M4 x 45 mm/M4 x 1-13/16 inches)

when assembling the speaker

the base plate.

(SP-THC6OF)(2)

Stand (2)Front speaker Base plate (2)

Assembled speakers

With stand: Refer to steps 1 to Without stand: Refer to steps

3. 2 and 3.

Stand (or speaker directly) _

When assembling the speaker with the base plate, use the screws @.

Red White

You can route the speaker cord by using speaker cord clamp (supplied).

Screw M4 x 20 mm/M4 x 13/16 inches

(supplied) _

Base plate

Connections [ Donot connectthe powercordunti_allother connectionshavebeenmade. ]

• Connectingthesurroundspeakers-- TH-CSO

Surround speaker (SP-THC50S)(2)

___" Speaker

(bottom)

Red White

• Connectingthecenterspeaker-- TH-C60/TH-C50

Center speaker (SP-THC60C) (1)

Red White

Black Black

For TH-C40, the front, surround and center speakers are equipped with their speaker cords attached directly to their

speaker unit instead ofhaving speaker terminals on their cabinet.

Front speaker

(SP-THC40F)

Surround speaker Centerspeaker

(SP-THC40S) (SP-THC40C)

Connections [ Donot connectthe powercorduntilallother connectionshavebeenmade. ]

• Connectingthesatellitespeakersto thesubwoofer

Note that the illustration below is for SP-PWC60.

Before connecting the speaker cords;

Twist and pull the insulation coat off and remove.

Powered subwoofer TH-C60:SP-PWC60 TH-C50:SP-PWC50

TH-C40:SP-PWC40

TH-C60:SP-THC60F TH-C50:SP-THC60F TH-C40:SP-THC40F

Frontspeakers

@ @

@ @ @ @ @ @

Speaker cord

Connect the black cords to the black (@) terminals. Connect the white cords to the (@) terminals

referring to the table below:

FRONT SPEAKERS (LEFT) FRONT SPEAKERS (RIGHT)

CENTER SPEAKER SURROUND SPEAKERS (LEFT)

SURROUND SPEAKERS (RIGHT)

White

Red Green Blue

Gray

Centerspeaker TH-C60:SP-THC60C

TH-C50:SP-THC60C TH-C40:SP-THC40C

CAUTION

• If you connect speakers other than the supplied ones, use speakers of

the same speaker impedance (SPEAKER IMPEDANCE) indicated near the speaker terminals on the rear of the powered subwoofi.'r.

• DO NOT connect more than one speaker to one speaker terminal.

• When installing the satellite speakers on the wall;

- Be sure to have them installed on the wall by qualified personnel. DO NOT install the satellite speakers on the wall by yourself to avoid unexpected damage from thlling off the wall due to incorrect

installation or weakness in wall structure. Care must be taken in selecting a location lbr speaker installation

on a wall. Injury to personnel or damage to equipment may result

if the speakers installed interfere with daily activities.

Surround speakers TH-C60:SP-THC60S

TH-C50:SP-THC50S TH-C40:SP-THC40S

Precautions for daily use

• When moving the speakers, do not pull the speaker cords;

otherwise, the speakers may fiall over, causing damage or injur_

• Do not reproduce sounds at so high a volume that the sound is distorted; otherwise, the speakers may be damaged by internal

heat buildup.

For TH-C60/TH-C50:

• When holding a speaker, always grasp the lower portion.

• Do not lean against the speakers, as the speakers could fall down or break, possibly causing an iniur?c Especially be careful that

children do not lean against them.

Connections [ Donot connectthe powercorduntilallother connectionshavebeenmade. ]

NOTE

• This system outputs the signal to HDMI MONITOR OUT terminal

Tu obtain the best possible sound from this system, :ou need to place all the speakers except the subwoofer at the same distance

from the listening position.

Center speaker

Powered subwoofer

Surround left "'. .-" Surround right

speaker " speaker

If your speakers cannot be placed at the same distance from the

listening position Yuu can adjust the delay time of the speakers. See "Delay menu

(DELAY)"on page 35.

NOTE

• Place the satellite speakers o1"_a fiat and level surfhce.

• The front and center speakers aremagnetically shielded to avoid color distortions on TVs. However, if not installed properly, they may cause

color distortions. So, pay attention to the *bllowingwhen installing the speakers.

When placing the speakers near a TV set, turn offthe TV's main power switch or unplug it befZ_reinstalling the speakers. Then wait

at least 30 minutes bef_re turning on the TV's main power switch again.

Some TVs may still be affected even though you have tbllowed the above. If this happens, move the speakers away from the TV.

• The surround speakers are not magnetically shielded. If they are located nearby the TV or monitor, it will probably cause color distortion on the screen. To avoid this, do not place the speakers nearby the TV or monitor.

• Besure to place the powered subwoofer to the TV's right. Ifyou place the powered subwoof}r to the TV's left, keep suftlcient distance between them to prevent the TV screen from appearing mottled.

only when the source is DVD.

• This system outputs the audio signal of 48 kHz, 44.1 kHz, or 32 kHz Linear PCM from HDMI MONITOR OUT terminal. To activate or

deactivate the audio signal output from HDMI terminal, see page 34.

• HDMI indicator lights on the display window when the system and the TV recognize each other and are ready to send and receive signals.

• When you enjoy HDCP contents, sound and picture may not be transmitted to the speakers and TV tbr a fi.'wseconds in the beginning

lbr confirmation.

What is HDMI?

The HDMI (High Definition Multimedia Interface) is the standard interl:ace for the next-generation TV. By connecting this

system and a TV with the HDMI cable, digital video signals and audio signals are transmitted through the cable. You can enjoy

digital video and sound without AD/DA conversion with easy connection.

In addition, this system is compatible with HDCP (High- Bandwidth Digital Content Protection), and HDCP contents can

be viewed if you connect a HDCP compatible TV to this system.

• Toconnecta IV equippedwith the componentvideoinput

jacks

• With analog video connection, you can get better picture quality in the order -- Component video > S-video > Composite video.

• If }_ur TV supports progressive video input, you can enjoy a high quality picture by setting the progressive scan mode to active.

(See page 18.)

To component _ _

videoinput

Center unit Component video cord (not supplied)

NOTE

• If the component video input jacks of your TV are of the BNC type, use a plug adapter (not supplied) to convert the pin plugs to BNC plugs.

• The component video signals can be output only when you select DVD or USB MEMORY as the source to play. (See page 17.)

• Distortion of picture may occur when connecting to the TV via a

VCR, or to a TV with a built-in VCR.

• You need to set "MONITOR TYPE" in the PICTURE menu correctly according to the aspect ratio of your TV (See page 34.)

• ToconnectaIV equippedwiththe HDMIjack

HDMI connection allows you to enjoy high quality picture on your HDMI equipped TV with high-definition digital video signals.

• You can select the type of video signal from 480p, 1080i, or 720p. (See page 18.)

Center unit ]

To HDMI input

HDMI cable (not supplied)

• ToconnectaTVequippedwiththecompositeorS-videojacks

Center unit

_ Composite video cord (supplied)

or 1

(not supplied)

Align the • marks.

[_ S-video cord 1

To S-video input

To composite video input

+ 33 hidden pages