Instruction Manual
Stereo Wireless Speaker
SP-AT3-B / SP-AT3-W
Contents
Safety Warnings.....................................................................................4
Unpacking ..............................................................................................6
Product Overview ..................................................................................7
Front View..................................................................................................................7
Top View ..................................................................................................................... 8
Rear View ...................................................................................................................9
Charging the Speaker .........................................................................10
Battery Life .............................................................................................................. 11
When the Battery is Almost Empty ............................................................... 11
General Operation...............................................................................12
Powering ON/OFF ................................................................................................12
Automatic Power O Function .......................................................................12
Adjusting the Volume .........................................................................................12
Stereo Speaker Connection ...............................................................13
Manual Disconnect the Stereo Speaker Connection.............................13
Mono Speaker Pairing ........................................................................................13
Manual Pairing for Stereo Speaker Connection.......................................14
Bluetooth® Operation ..........................................................................15
Listening to Music ...............................................................................16
Bluetooth® Mode ...................................................................................................16
AUX Mode ................................................................................................................ 17
Maintenance ........................................................................................18
Cleaning the Unit ..................................................................................................18
Hints and Tips.......................................................................................19
Product Fiche and Specifications ......................................................21
Others Information and Licences ......................................................22
4
Safety Warnings
• Read all the instructions carefully before using the unit and keep them
for future reference.
• Retain the manual. If you pass the unit onto a third party make sure to
include this manual.
Damage
• Please inspect the unit for damage after unpacking.
• Do not continue to operate the unit if you are in any doubt about
it working normally, or if it is damaged in any way - switch o and
consult your dealer.
Location of Unit
• The unit must be placed on a at stable surface and should not be
subjected to vibrations.
• Do not place the unit on sloped or unstable surfaces as the unit may
fall o or tip over.
• Do not place the unit close to table edge. It may fall o due to
vibration during high volume listening.
Temperature
• Avoid extreme degrees of temperature, either hot or cold. Place the
unit well away from heat sources such as radiators or gas/electric res.
• Avoid exposure to direct sunlight and other sources of heat.
Naked Flames
• Never place any type of candle or naked ame on the top of or near
the unit.
Moisture
• To reduce the risk of re, electric shock or product damage, do not
expose this unit to rain, moisture, dripping or splashing. No objects
lled with liquids, such as vases, should be placed on the unit. Do not
operate the unit with wet hands, near water or other liquid.
• If you spill any liquid into the unit, it can cause serious damage. Switch
it o at the mains immediately. Withdraw the mains plug and consult
your dealer.
5
Ventilation
• To prevent the risk of electric shock or re hazard due to overheating,
ensure that curtains and other materials do not obstruct the
ventilation vents.
• Do not install or place this unit in a bookcase, built-in cabinet or in
another conned space. Ensure the unit is well ventilated.
Interference
• Do not place the unit on or near appliances which may cause
electromagnetic interference. If you do, it may adversely aect the
operating performance of the unit, and cause a distorted sound.
Service
• To reduce the risk of electric shock, do not remove screws. The
unit does not contain any user-serviceable parts. Please leave all
maintenance work to qualied personnel.
• Do not open any xed covers as this may expose dangerous voltages.
Maintenance
• Do not use any type of abrasive pad or abrasive cleaning solutions as
these may damage the unit’s surface.
• Do not use liquids to clean the unit.
6
Thank you for purchasing your new JVC Speaker.
We recommend that you spend some time reading this
instruction manual in order that you fully understand all the
operational features it oers. You will also nd some hints and tips
to help you resolve any issues.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
Unpacking
Remove all items from the packaging. Retain the packaging. If you
dispose of it please do so according to local regulations.
The following items are included:
• Main Unit x 2
• USB to Micro USB Cable
• 3.5 mm to 3.5 mm Stereo Audio Cable
• Instruction Manual
• Quick Start Guide
7
Product Overview
Front View
1. Speaker
1
8
Top View
1. Button
• Press to switch the unit On.
• Press and hold to switch the unit O.
• Battery Charging Indicator
2. + / – Button
• Adjust the volume.
3. Button
• Press to disconnect the existing paired Bluetooth® device.
• Press to play / pause / resume playback in Bluetooth® mode.
31
22
9
Rear View
1. RESET Button
2. AUX IN Socket
3. L/R Channel Indicator
4. Stereo Pair Button
5. DC IN 5V Charging Port
1 42 3 5
10
USB to Micro USB
Cable (included)
Computer
USB charging
device
Charging the Speaker
The unit has a built-in rechargeable battery, which should be charged
before using the speaker for the rst time.
The battery is charged automatically whenever the unit is connected to
a computer or a USB charging device.
1. Connect the supplied micro-USB cable to the speaker, and then
connect the other end to a computer.
2. The light of the button will ash during charging. The light will go
o automatically after fully charge.
•Micro-USB socket is for charging the unit only.
•Do not overcharge the battery as it may shorten its life. Disconnect the USB cable
after the unit is fully charged.
11
•Use the supplied micro-USB cable only, and connect directly to a computer.
Charging will not be completed properly by an indirect connection, such as via
a USB hub.
•If the unit is not used for a long time, the light of the button may not light up
when you connect the micro-USB cable to charge the unit. In this case, do not
disconnect the micro-USB cable from the unit and wait until the light of the
button lights up.
•Charging time varies depending on conditions of use of the battery and the
output voltage of your charging device.
•The unit will get warm during charging. This is not a malfunction.
Battery Life
When using the Bluetooth® connection, the speaker has approx. 6 hours
of playback time in fully charge status and in medium sound level.
Time stated above may vary, depending on ambient temperature or
conditions of use.
When the Battery is Almost Empty
The light of the button will ash quickly and the unit will prompt
a continuous warning tone. When the battery becomes empty, the
speaker turns o automatically.
12
General Operation
Powering ON/OFF
• Press Button to switch on the unit.
• Press and hold Button to switch o the unit.
Automatic Power O Function
If the speaker is left in any of the following conditions for more than
approx 15 minutes, it turns o automatically.
• No Bluetooth® connection has been established between the unit
and the external mobile device.
• When the battery becomes empty, the unit turns o automatically.
Adjusting the Volume
During playback, press + / – buttons on the unit to increase or decrease
the volume. The unit beeps when set to the highest volume level in
Bluetooth® mode during playback.
13
Stereo Speaker Connection
The unit support true wireless stereo output with 2 speakers. After
both speakers are switched on, they will start pairing to each other
automatically. The STEREO PAIR L/R indicators of both speakers will
start ashing. The units will voice “CONNECTED” after stereo connection
is completed.
The STEREO PAIR L indicator and the STEREO PAIR R indicator will be
on to represent its audio channel.
• Press +/– on either one of the speakers to increase/decrease the
volume.
• Press and hold button on either one of the speaker to switch o
both the speakers.
• The Bluetooth Indicator will only work on the left channel speaker.
Before connecting your audio device to the speaker, make sure that both
speakers are switched on and connected for stereo connection.
Manual Disconnect the Stereo Speaker Connection
The wireless stereo connection will be disconnected in the following
circumstances:
• Press and hold the button on one of the speakers to disconnect the
Bluetooth® connection.
Mono Speaker Pairing
After you disconnect the wireless stereo connection between the
two speakers. You can use any one of them as a mono speaker. For
Bluetooth® pairing, please refer to the Bluetooth® Operation section
(p.15).
The operation range between both speakers for wireless stereo connection is
up to 8 metres.
14
Manual Pairing for Stereo Speaker
Connection
To manually pair the 2 speakers again for
wireless stereo connection:
• Switch o both the speakers and then
switch them on again. They will start
pairing to each other automatically.
OR
1. Press the Stereo Pair button on one of the
speakers, and then press the Stereo Pair
button on the other speaker. The STEREO
PAIR L/R indicators of both speakers will start ashing.
2. The unit will voice “CONNECTED” after stereo connection is
completed. The speaker you press the Stereo Pair button rst will
be the left channel speaker. The STEREO PAIR L indicator and the
STEREO PAIR R indicator will be on to represent its audio channel.
Clear Bluetooth memory
Press and hold
button and Stereo Pair button on the speaker to clear the
Bluetooth® memory of the speaker. It is recommended to clear the Bluetooth®
memory of both speakers. To reconnect the wireless stereo connection, refer to
Manual Pairing for Stereo Speaker Connection section above.
Rear view of the speaker
15
Bluetooth® Operation
Switch the speaker on. The unit will nd the last paired Bluetooth® device
and connect automatically.
If there is no previously paired device found, the speaker will enter
Bluetooth® pairing mode automatically. The light of button will ash
rapidly. Follow the steps below to pair the unit with a Bluetooth® device.
1. Activate your Bluetooth® device and select the search mode.
“SP-AT3-X” will appear on your Bluetooth® device list.
2. Select “SP-AT3-X” and enter “0000” for the password if necessary. If
connect successful, the light of button will light up and the unit will
voice “Connected”.
3. To disconnect the Bluetooth® function, disable the function from your
Bluetooth® device.
•Connect the stereo audio cable to disable Bluetooth® mode.
•You can enjoy music wirelessly from a smartphone, mobile phone, or music
player.
•The operational range between the unit and the device is up to 10 metres. Any
obstacle between the device and the unit can reduce operational range.
•Before connecting a Bluetooth® device to the unit, ensure you know the device’s
capabilities.
•Compatibility with all Bluetooth® devices is not guaranteed.
•Keep this player away from other electronic devices that may cause interference.
•The player will also be disconnected when your device is moved beyond the
operational range.
The model name “SP-AT3-X” shown in the Bluetooth® device list covers both SP-
AT3-B” and “SP-AT3-W”.
16
Listening to Music
Bluetooth® Mode
You can enjoy listening to music and basic remote control operation of
a Bluetooth® device via a Bluetooth® connection. The Bluetooth® device is
required to support the following Bluetooth® proles.
• A2DP (Advanced Audio Distribution Prole): you are enable to enjoy
high-quality audio content wirelessly.
• AVRCP (Audio Video Remote Control Prole): use the unit to control
play.
– To pause / resume playback, press once.
– To increase or decrease the volume, press + / – .
17
AUX Mode
Use the supplied 3.5 mm to 3.5 mm stereo audio cable to connect the
headphone socket of an audio device and the AUX IN socket of the unit.
The light of button will switch o and the unit will voice “LINE IN
mode”.
• To increase or decrease the volume, press + / – .
Disconnect the audio cable to enable Bluetooth® mode.
3.5 mm to 3.5 mm stereo
audio cable (included)
•Do not connect the unit to the device with output power more than 1V
(e.g. DVD player) to avoid sound distortion. You may refer to the instruction
manual of the external audio device for its output power.
•While using Stereo Speaker Connection (refer to p.13 for details), make sure
you connect the 3.5 mm to 3.5 mm stereo audio cable to the AUX IN socket
of the LEFT speaker The Bluetooth button will ash and the L Channel
Indicator the of the left speak will light up.
18
Maintenance
Cleaning the Unit
Ensure the unit is fully removed the cables from the unit before cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning uids containing alcohol, ammonia or
abrasives.
• Do not spray aerosol at or near the unit.
19
Hints and Tips
If a problem does occur, it may often be due to something very minor.
The following table contains various tips. If you require additional
assistance,
• for UK, please call our UK Call Centre on 0344 561 1234.
• for Ireland, please call our Ireland Call Center on 1 890 818 575.
Problem Solution
No power. • The battery may be exhausted. Connect
the USB cable and plug into a USB port of a
computer which is turned on.
• Ensure that the unit is switched on.
No Sound. • Ensure that the unit is switched on.
• Check the volume level of the unit.
• Check the sound input source.
There is no stereo
connection
between both
speakers.
• Before connecting your audio device to
the speaker, make sure that both speakers
are switched on and connected for stereo
connection.
• While using AUX mode, make sure that you
connect the 3.5 mm to 3.5 mm stereo audio
cable to the AUX IN socket of the LEFT
speaker.
Sound is distorted. • Volume is too high. Adjust the volume control.
Not charging. • Ensure that the micro-USB charging cable is
correctly connected with the unit.
20
Problem Solution
I cannot nd
“SP-AT3-X” on my
Bluetooth® device.
• Ensure that the unit is switched on.
• Ensure that the Bluetooth® function is
activated on your Bluetooth® device.
• The unit has a Bluetooth® function that can
receive a signal up to 10 metres. Keep a
distance within 10 metres between the unit
and your Bluetooth® device.
Voice interrupted
in Bluetooth®
mode.
• Ensure that the unit and Bluetooth® device is
connected within 10 metres.
• Ensure that no obstruction between the unit
and the Bluetooth® device.
No Sound in
LINE IN mode.
• Ensure the audio cable is properly connected.
The unit does not
respond when
pressing any
buttons.
• The unit may freeze up during use. Switch the
unit o and then on again to reset the unit.
• Press the RESET button to restart the unit.
21
Product Fiche and Specifications
Brand JVC
Model SP-AT3-B (Black) / SP-AT3-W (White)
Speaker Power Output 2 × 3W rms
Input (USB) 5V 600 mA
Rechargeable Li-ion
Battery
DC 3.7V 1500 mAh
Dimension (1 speaker) 95 mm (L) × 96 mm (H) × 95 mm (D)
Weight 278 g
Features and specications are subject to change without prior notice.
22
Others Information and Licences
Visit Partmaster.co.uk today for the easiest
way to buy electrical spares and accessories.
With over 1 million spares and accessories
available we can deliver direct to your door the very next day. Visit
www.partmaster.co.uk or call 0344 800 3456 (UK customers only).
Calls charged at National Rate.
For general information about this appliance and
handy hints and tips, please visit
www.knowhow.com/knowledgebank or call
UK: 0344 561 1234
Ireland: 1890 818 575.
The symbol on the product or its packaging indicates
that this product must not be disposed of with your
other household waste. Instead, it is your responsibility
to dispose of your waste equipment by handing it over
to a designated collection point for the recycling of
waste electrical and electronic equipment. The separate
collection and recycling of your waste equipment at the
time of disposal will help conserve natural resources and
ensure that it is recycled in a manner that protects human
health and the environment.
For more information about where you can drop o your
waste for recycling, please contact your local authority, or
where you purchased your product.
All trademarks are the property of their respective owners and all rights
are acknowledged.
The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of s uch marks by DSG Retail Limited
is under license. Other trademarks and trade names are those of their
respective owners and all rights are acknowledged.
Dear Customer,
This apparatus is in conformance with the valid European
directives compatibility and electrical safety.
European representative of the manufacturer is:
DSG Retail Ltd. (co. no. 504877)
1 Portal Way, London, W3 6RS, UK
For Help and Support Call
UK: 0344 561 1234
Ireland: 1890 818 575
The product is distributed and warranted exclusive by DSG Retail Ltd.
“JVC” is the trademark of JVC KENWOOD Corporation,
used by DSG Retail Ltd. under license.
(IB-SP-AT3-B_W-160516V1)
Loading...