JVC SP50M-C, SP55M-C, SL42B-C, SL47B-C, Black Sapphire SP50M-C Quick Start Manual
...
Safety Precautions
1
Heed all warnings
Follow all instructions
Do not use this device near water
Clean only with dry cloth
Do not block any ventilation openings. Install in accordance with manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other heat-generation devices.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the device.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of
time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
When you connect the product to other equipment, turn off the power and unplug all
of the equipment from the wall outlet. Failure to do so may cause electric shock
and serious personnel injury. Read the owner’s manual of the other equipment
carefully and follow the instructions when making any connections.
Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break
and injury may occur.
Setting Up The TV
2
Package Contents
Your JVC Black Sapphire LCD TV is shipped with the items shown below:
Insert Batteries to Remotes
Open the battery compartment by pressing
the top of the cover and slide down
Insert the two AAA batteries provided with
correct polarity
Setting Up The TV
3
Attaching the Stand
Place TV on a flat surface
and the protective bag.
Screen face down.
Attach TV stand to rear of
television with the provided
four (4) pan head screws.
Mount the base to the stand
with the provided three (3)
flat head screws
Carefully lift TV up
Removing the TV Stand
When television needs to be transported, remove TV Stand and pack TV back in
its shipping box. To remove TV Stand, remove 4 pan head screws securing
stand to rear of television.
Setting Up The TV
4
Wall Mounting
Installing Wall Mount
A wall mount kit (not included with TV) allows you to mount the TV onto a wall.
For the proper and safe installation of a wall mount, follow the detailed
instructions included in the wall mount kit.
For product protection and safety reasons, JVC strongly
recommends contacting a professional installer or technician
for assistance with the installation of the wall mount and with
the setup of your TV. JVC will not be held responsible for any
damage to the product or injury to yourself and others should
you decide to install the wall mount and TV without the
assistance of a professional installer or technician.
Do not install your TV to the wall mount while the TV is turned
on. It can result in personal injury due to electric shock.
A minimum of two people should be used when moving TV,
and when installing TV onto a wall mount.
1
Turn off your TV and disconnect all cables.
2
Carefully place the TV face down on a flat, clean, and padded surface.
If available, put TV cover or protective sheet onto the TV before laying
the TV down on flat surface.
3
Using a cross-tip screwdriver, remove four screws securing TV stand
to rear of TV. Remove TV stand.
4
Follow instructions in wall mount kit and install wall mount. Install TV
onto wall mount in accordance with wall mount kit instructions.
NOTE: Wall mount screw hole pattern on rear of TV is VESA 400 x 400mm, with
M8 screws
Loading...