JVC RM-C1257G User Manual

Color Television Users Guide

For Model:

AV-32S565

Illustration of AV-32S565 and RM-C1257G

Important Note:

In the spaces below, enter the model and serial number of your television (located
at the rear of the television cabinet). Staple your sales receipt or invoice to the
inside cover of this guide. Keep this user’s guide in a convenient place for future
reference. Keep the carton and original packaging for future use.

Model Number:

Serial Number:

LCT1639-001A-A

0504TNH-II-IM

Important Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: To reduce the risk of electric shock. Do not

remove cover (or back). No user serviceable
parts inside. Refer servicing to qualified service
personnel.

The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS TV

SET TO RAIN OR MOISTURE.

CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES

REGARDING THE USE OF THIS UNIT.

1. Operate only from the power source specified on the unit.

2. Avoid damaging the AC plug and power cord.

3. Avoid Improper installation and never position the unit where good ventilation is unattainable.

4. Do not allow objects or liquid into the cabinet openings.

5. In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair
it yourself or remove the rear cover.

Changes or modifications not approved by JVC could void the warranty.

* When you don’t use this TV set for a long period of time, be sure to disconnect both the

power plug from the AC outlet and antenna for your safety.

* To prevent electric shock do not use this polarized plug with an extension cord, receptacle or

other outlet unless the blades can be fully inserted to prevent blade exposure.

IMPORTANT RECYCLING INFORMATION

This product utilizes both a Cathode Ray Tube (CRT) and other components that
contain lead. Disposal of these materials may be regulated in your community due to
environmental considerations. For disposal or recycling information, please contact
your local authorities, or the Electronic Industries Alliance: http://www.eiae.org

2

• As an “ENERGY STAR®” partner,
JVC has determined that this
product or product model meets the
“ENERGY STAR
efficiency.

®

” guidelines for energy

Important Safeguards

CAUTION:

Please read and retain for your safety.

Electrical energy can perform many useful functions. This TV set has been engineered and
manufactured to assure your personal safety. But improper use can result in potential
electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this
TV set, observe the following basic rules for its installation, use and servicing. Also follow all

warnings and instructions marked on your TV set.

INSTALLATION

1 Your TV set is equipped with a polarized AC line plug (one

blade of the plug is wider than the other). This safety feature
allows the plug to fit into the power outlet only one way.
Should you be unable to insert the plug fully into the outlet,
try reversing the plug. Should it still fail to fit, contact your
electrician.

2 Operate the TV set only from a power source as indicated on the TV set or refer to the

operating instructions for this information. If you are not sure of the type of power supply to
your home, consult your TV set dealer or local power company. For battery operation, refer
to the operating instructions.

3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords

and broken plugs. They may result in a shock or fire hazard. Call your service technician for
replacement.

4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set

where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.

5 Do not use this TV set near water — for example, near a bathtub, washbowl, kitchen sink, or

laundry tub, in a wet basement, or near swimming pool, etc.

6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded

so as to provide some protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna discharge unit, connection
requirements for the grounding electrode.

(POLARIZED-TYPE)

3

7 An outside antenna system should not be located in the vicinity of overhead power lines

or other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

ANTENNA
LEAD IN
WIRE

GROUND
CLAMP

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)

ELECTRICAL
SERVICE
EQUIPMENT

NEC - NATIONAL ELECTRIC CODE

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ARTICLE 250, PART H)

8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during

operation to be released.

Therefore:

— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa,

rug, etc.

— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.
— Never cover the openings with a cloth or other material.
— Never place the TV set near or over a radiator or heat register.

9 To avoid personal injury:

— Do not place a TV set on a sloping shelf unless properly secured.

— Use only a cart or stand recommended by the TV set manufacturer.
— Do not try to roll a cart with small casters across thresholds or deep pile carpets.
— Wall or shelf mounting should follow the manufacturer’s instructions, and should use a

mounting kit approved by the manufacturer.

Use

10 Caution children about dropping or pushing objects into the TV set through cabinet

openings. Some internal parts carry hazardous voltages and contact can result in a fire or
electrical shock.

11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol

cleaner.

12 Never add accessories to a TV set that has not been designed for this purpose. Such

additions may result in a hazard.

4

PORTABLE CART WARNING

(Symbol provided by RETAC)

13 For added protection of the TV set during a lightning storm or when the TV set is to be left

unattended for an extended period of time, unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to product due to lightning storms or power line surges.

14 A TV set and cart combination should be moved with care. Quick stops, excessive force,

and uneven surfaces may cause the TV set and cart combination to overturn.

Service

15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel

under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the TV set.
C. If the TV set has been exposed to rain or water.
D. If the TV set does not operate normally by following the operating instructions. Adjust

only those controls that are covered in the operating instructions as improper adjustment
of other controls may result in damage and will often require extensive work by a
qualified technician to restore the TV set to normal operation.

E. If the TV set has been dropped or damaged in any way.
F. When the TV set exhibits a distinct change in performance — this indicates a need for

service.

16 Do not attempt to service this TV set yourself as opening or removing covers may

expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.

17 When replacement parts are required, have the service technician verify in writing that the

replacement parts he uses have the same safety characteristics as the original parts. Use
of manufacturer’s specified replacement parts can prevent fire, shock, or other hazards.

18 Upon completion of any service or repairs to this TV set, please ask the service technician

to perform the safety check described in the manufacturer’s service literature.

19 When a TV set reaches the end of its useful life, improper disposal could result in a picture

tube implosion. Ask a qualified service technician to dispose of the TV set.

20 Note to CATV system installer.

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as practical.

5

Table of Contents

Quick Setup . . . . . . . . . . . 7

Unpacking your TV . . . . . . . . . . . . 7

TV Model . . . . . . . . . . . . . . . . 8

TV Remote Control . . . . . . . . . . . 9

Getting Started . . . . . . . . . . . . . 10

The Remote Control . . . . . . . . . . 10

Connecting Your Devices . . . . . . . 11

Auto Tuner Setup . . . . . . . . . . 15

Remote Programming . . . . . 16

Setting CATV, VCR and DVD Codes . . . 16

CATV or Satellite Codes . . . . . . . . 16

VCR Codes . . . . . . . . . . . . . . 17

DVD Codes . . . . . . . . . . . . . . 18

Search Codes . . . . . . . . . . . . . 19

Onscreen Menus . . . . . . . . 20

Using the Guide . . . . . . . . . . . . . 20

Onscreen Menu System . . . . . . . . . 21

Initial Setup . . . . . . . . . . 23

Auto Tuner Setup . . . . . . . . . . . . 23

Channel Summary . . . . . . . . . . . . 23

Channel Label . . . . . . . . . . . . 24

V-Chip . . . . . . . . . . . . . . . . . . 25

Set Lock Code . . . . . . . . . . . . . 31

Auto Demo . . . . . . . . . . . . . . . 31

Language . . . . . . . . . . . . . . . . 32

Closed Caption . . . . . . . . . . . . . 32

Auto Shut Off . . . . . . . . . . . . . . 33

Tilt Correction . . . . . . . . . . . . . . 33

Noise Muting . . . . . . . . . . . . . . 33

Front Panel Lock . . . . . . . . . . . . 34

Video Input Label . . . . . . . . . . . 34

Picture Adjust . . . . . . . . . 35

Picture Settings . . . . . . . . . . . . . 35

Adjust Picture Settings . . . . . . . . . 35

Color Temperature . . . . . . . . . . . . 35

Digital Noise Clear . . . . . . . . . . . . 36

VSM . . . . . . . . . . . . . . . . . . . 36

Natural Cinema . . . . . . . . . . . . 36

Reset . . . . . . . . . . . . . . . . . . 37

Sound Adjust . . . . . . . . . 38

Sound Settings . . . . . . . . . . . . . 38

Adjust Sound Settings . . . . . . . . . 38

MTS (Multi-channel Sound) . . . . . . . 38

Reset . . . . . . . . . . . . . . . . . . 38

Clock Timers . . . . . . . . . . 39

Set Clock . . . . . . . . . . . . . . . . 39

On/Off Timer . . . . . . . . . . . . . . . 40

Button Functions . . . . . . . 41

Multi Screen Function . . . . . . . . . . 41

Twin . . . . . . . . . . . . . . . . . 41

Index . . . . . . . . . . . . . . . . . 42

Freeze . . . . . . . . . . . . . . . . 42

Swap . . . . . . . . . . . . . . . . . 42

Select . . . . . . . . . . . . . . . . . 42

Power . . . . . . . . . . . . . . . . . . 43

Number Buttons . . . . . . . . . . . . . 43

Tune . . . . . . . . . . . . . . . 43

Input . . . . . . . . . . . . . . . . . . . 43

Channel +/- . . . . . . . . . . . . . . 43

Volume +/- . . . . . . . . . . . . . . . 43

Return+ . . . . . . . . . . . . . . . 44

Sound . . . . . . . . . . . . . . . . . . 44

Muting . . . . . . . . . . . . . . . . . . 44

Video Status . . . . . . . . . . . . . . . 45

TheaterPro D6500K . . . . . . . . . . . 45

Sleep Timer . . . . . . . . . . . . . . . 45

Display . . . . . . . . . . . . . . . . . 46

C.C. . . . . . . . . . . . . . . . . . . . 46

Aspect . . . . . . . . . . . . . . . . . 47

Aspect Ratios . . . . . . . . . . . . . 47

Menu . . . . . . . . . . . . . . . . . . 48

OK . . . . . . . . . . . . . . . . . . . 48

Back . . . . . . . . . . . . . . . . . . . 48

TV/CATV Slide Switch . . . . . . . . . . 49

VCR/DVD Slide Switch . . . . . . . . . 49

VCR Buttons . . . . . . . . . . . . . . . 49

DVD Buttons . . . . . . . . . . . . . . . 49

Light . . . . . . . . . . . . . . . . . . 49

Appendices . . . . . . . . . . 50

Troubleshooting . . . . . . . . . . . . . 50

Warranty . . . . . . . . . . . . . . . . . 51

Authorized Service Centers . . . . . . . 52

Specifications . . . . . . . . . . . . . 53

Notes . . . . . . . . . . . . . . 54

6

Quick Setup Unpacking your TV

Thank you for your purchase of a JVC Color Television. Before you begin setting up your new
television, please check to make sure you have all of the following items. In addition to this
guide, your television box should include:

Two AA

1 Television

TM

1 Remote Control

POWER

TV

CATVVCR

DVD

MULTI SCREEN

TWIN

INDEX

C.C.

SWAP

SELECT

INPUT

FREEZE

DISPLAY

1

3

2

SLEEP TIMER

4

6

5

SOUND

7

9

8

RETURN+

TUNE

VIDEO STATUS

0

THEATER PRO

LIGHT

ASPECT

MUTING

OK

CH +

VOL

VOL

+

–

CH –

BACK

MENU

VCR/DVD

VCR CHANNEL

TV/VCR

POWER

PREV NEXT

PLAY FFREW

REC

STOP PAUSE

OPEN/CLOSE

STILL/PAUSE

RM-C1257G

TV

Once you have unpacked your television, the next step is to connect it to your antenna/
cable or satellite system and to connect the audio/video devices you want to use with your
television. To make these connections you will use plugs like the ones illustrated below.

Batteries

AA Alkaline

AA Alkaline

Coaxial Cables

Component Cables

Composite Cables

Audio Cables

Used to connect an
external antenna or
cable TV system to
your TV.

S-Video Cable

Used to make video
connections with S-Video
VCRs, Camcorders and
DVD players.

We recommend that before you start using your new television, you read your entire User’s
Guide so you can learn about your new television’s many great features. If you’re anxious to
start using your television right away, a quick setup guide follows on the next few pages.

Used to connect audio/
video devices like
VCRs, DVD players,
stereo amplifiers, game
consoles, etc.

7

Quick Setup TV Model

NOTE: Before you connect your television to another device, please refer to the proper

diagrams for your specific TV and remote. These will help assist you in understanding
how to connect your television to another device, as well as use the remote to set up
your television.

Rear Panel Diagram

MODEL: AV-32S565

75Ω

( VHF/UHF )

AUDIO OUT

R L

INPUT 3

INPUT 2

INPUT 1

Front Panel Diagram

MODEL: AV-32S565

S–VIDEO VIDEO L/ MONO – AUDIO–R

AUDIO

OVER

R L

INPUT-4

UNPLUG THE POWER
CORD FROM AC OUTLET
BEFORE REMOVING THE
REAR COVER

When the rear cover is removed, follow
"CAUTION AT DISASSEMBLY"
procedure in the service manual before
plugging the TV's power cord into an
AC outlet. Failure to follow the
procedure will result in PERMANENT
damage to some of the television
features.

VIDEO S VIDEO

OVER

OVER

DÉBRANCHEZ LE CORDON DE LA
PRISE DE COURANT C. A. AVANT
DE RETIRER LE COUVERCLE
ARRIÈRE.

Une fois le couvercle arrière déposé
suivez l procédure « ATTENTION
LORS DU DÉMONTAGE » décrite
dans une prise c.a. L'omission de
suivre la procédure causera des
dommages PERMANENTS à
certaines fonctions du téléviseur.

COMPONENT VIDEO

INPUT 1INPUT 2

Y

P

b

Pr

MENU

Y

P

b

Pr

CHANNEL

OPERATE

VOLUME

8

Quick Setup TV Remote Control

TV

CATV VCR

FREEZE

DISPLAY

SLEEP TIMER

SOUND

VIDEO STATUS

THEATER PRO

MUTING

VOL

–

MENU

VCR CHANNEL

PREV NEXT

REC

OPEN/CLOSE

MULTI SCREEN

TWIN

SWAP

1

4

7

TUNE

ASPECT

CH +

CH –

PLAY FFREW

STOP PAUSE

RM-C1257G

TV

DVD

VCR/DVD

SELECT

POWER

POWER

INDEX

2

5

8

0

STILL/PAUSE

C.C.

INPUT

RETURN+

LIGHT

OK

VOL

+

BACK

TV/VCR

3

6

9

RM-C1257G

MODEL:

AV-32S565

• For information on remote control buttons, see pages 41 - 49.

9

Quick Setup Getting Started

Getting Started

These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away.

If you have questions, or for more detailed information on any of these steps, please consult
other sections of this manual.

Step 1 – The Remote Control

Before you can operate your remote control, you first
need to install the batteries (included).

Lift and pull the latch on the back of the remote control
to open. Insert two batteries (included) carefully noting
the “+” and “–” markings, placing the “–” end in the unit
first. Snap the cover back into place.

When you change the batteries, try to complete the
task within three minutes. If you take longer than
three minutes, the remote control codes for your
VCR, DVD, and/or cable box/satellite receiver may
have to be reset. See pages 16 - 18.

Key Feature Buttons

The four key feature buttons at the center of the remote
can be used for basic operation of the television. The top
and bottom buttons will scan forward and back through the
available channels. To move rapidly through the channels
using JVC’s Hyperscan feature, press and hold CH+ or
CH –. The channels will zip by at a rate of five channels per
second. The right and left buttons will turn the volume up or
down. These buttons are also marked with four arrows and
are used with JVC’s onscreen menu system. To use the
onscreen menus, press the M

ENU button.

MUTING

VOL

–

MENU

Basic Operation

Turn the television on and off by pressing the POWER button at the top right
corner of the remote.

• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if
you need to operate a cable box.

• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to
DVD to control a DVD player. Please see pages 16 to 18 for instructions on
programming your remote control to operate a cable box, VCR or DVD player.

10

CH +

CH –

OK

VOL

+

BACK

POWER

TV

CATV

VCR DVD

Quick Setup Connections

Step 2 – Connecting Your Devices

Please follow the flow chart below to determine which connection setup is right for you. Then,
refer to the appropriate diagrams to connect your television to other devices that you may
have. After you are finished connecting your devices, plug the power cord into the nearest
power outlet and turn on the TV.

A VCR is not necessary for operation of the television. If you follow these diagrams and the
television does not work properly, contact your local cable operator.

• To connect a DVD player, see Diagram #3. A DVD player is optional.

• If you have a satellite television system, please refer to the satellite TV manual.

Do you use a Cable TV Box?

Yes

Do you have a VCR? Do you have a VCR?

Yes No Yes No

Diagram #2

Diagram #1 Diagram #3 Diagram #1

No

11

Quick Setup Connections

Diagram #1

Cable or Antenna

Output

75Ω

( VHF/UHF )

Coaxial Cable

OR

OUT IN

TV Rear Panel

Cable Box

Note:

• If you do not have a cable box, connect the cable wire from the wall outlet into the back of

the TV.

Diagram #2

INPUT 3

INPUT 2

INPUT 1

AUDIO

R L

VIDEO S VIDEO

OVER

OVER

TV Rear Panel

75Ω

( VHF/UHF )

Cable or Antenna

OUT OUT

IN

Output

Coaxial Cable

OR

Two-Way
Splitter

VCR

IN

OUT

R L V

IN

OUT

OUT IN

Cable Box

Notes:

• If your VCR is a mono sound unit, it will have only one audio out jack. Connect it to the

LEFT AUDIO INPUT on the front of the TV.

• Use the S-Video connection if possible for superior picture quality.

• Your VCR must be turned on to view premium cable channels.

12

Quick Setup Connections

Notes:

• Green, blue and red are the most common colors for DVD cables. Some models may vary
colors. Please consult the user’s manual for your DVD player for more information.

• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete
one set of connections (DVD or audio output) before starting the other to avoid accidentally
switching the cables.

• You may also connect the DVD player to Input 1.

Diagram #3

Cable or Antenna

Output

Two-Way

Splitter

IN

OUT OUT

75Ω

( VHF/UHF )

TV Rear Panel

INPUT 3

INPUT 2

INPUT 1

Coaxial Cable

R L V

IN

OUT

AUDIO

R L

OR

VIDEO S VIDEO

OVER

OVER

AUDIO OUT

R L

IN

OUT

VCR

COMPONENT VIDEO

INPUT 1INPUT 2

Y

b

P

Pr

OUT

Y

b

P

Pr

Green

Y

Blue

P

B

Red

P

R

DVD Player (OPTIONAL)

13

Quick Setup Connections

r

Connecting to a Camcorder

You may connect a camcorder, game console or other equipment to your television by using
the front input jacks (Input 4) located under the front panel door. To acces, push on the door
to open it. You can also connect these using the television’s rear input jacks, using the same
instructions.

INPUT-4

OVER

S–VIDEO VIDEO L/ MONO – AUDIO–R

– OR–

MENU

CHANNEL

OPERATE

VOLUME

Camcorde

1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on

the side of the TV, OR connect an S-Video cable from the side of the TV to the camcorder.

2) Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on

the side of the TV.

3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on

the side of the TV.

Note:

• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the

L/MONO on the front of the TV.

14

Quick Setup Auto Tuner Setup

Step 3 – Auto Tuner Setup

JVC’s onscreen menu system lets you set your television up to meet your own personal viewing
preferences. The menu screens and their features are discussed in detail in this book. The menu
settings are optional, you can set as many or as few of them as you wish. But to begin watching
your television right away you will need to run the Auto Tuner Setup. This lets your television
learn the channels it is able to receive. To run the Auto Tuner Setup follow the steps below.

Press the Menu button on the remote control

π†

To AUTO TUNER SETUP

è

To operate

AUTO TUNER SETUP

TUNER MODE

OK

PRESS TO START

SELECT OPERATE EXIT

è

To choose CABLE (if you are connected to a cable system) or AIR (if you use an

antenna)

π†

To move to START

è

To start Auto Tuner Setup

The Auto Tuner will now memorize all of the clear, active channels your television can receive.
This will take one or two minutes.

CABLE

MENU

NOW

PROGRAMMING !

48

When the setup is finished, PROGRAMMING OVER ! is displayed. Your quick setup is now
complete. You can now begin watching your television, or you can continue on in this guide
for more information on programming your remote control, or using the JVC onscreen menu
system to customize your television viewing experience.

Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is
normal.

STOP

The Quick Setup is complete

15

Remote Programming

Setting the CATV, VCR and DVD Codes

You can program your remote to operate your cable box, satellite receiver, VCR or DVD
player by using the instructions and codes listed below. If the equipment does not respond
to any of the codes listed below or to the code search function, use the remote control
supplied by the manufacturer.

Cable Box or Satellite Codes

The remote control is programmed with cable box and satellite codes for power on/off,
channel up/down, and 10 key operation.

1) Find the cable box or satellite brand from the list of codes shown below.

2) Slide the 2-way selector switch to “CATV”.

3) Press and hold down the D

key pad.

4) Release the DISPLAY button, and confirm the operation of the cable box/satellite receiver.

• If your cable or satellite box does not respond to the first code, try the others listed. If it does

not respond to any code, try the search codes function, on page 19.

ISPLAY button, then enter the first code number listed with the 10

Cable Box CODES

ABC
Archer
Cableview
Citizen
Curtis
Diamond
Eagle
Eastern
GC Brand
Gemini
General Instrument

Hamlin

Hitachi
Jerrold

Macom

Magnavox
Memorex

Movietime
Oak
Panasonic

Paragon

Philips

Pioneer
Pulsar

024
032, 025
051, 032
022, 051
058, 059
024, 032, 025
029
034
032, 051
022, 043
065, 024, 025,

026, 027, 020,
021, 022, 057,
023
040, 041, 042,
045, 058, 064
049, 024

065, 024, 025,
026, 027, 020,
021, 022, 057,
023

049, 050, 051,
054

033
030
032, 051
039, 037, 048
055, 056, 060,

071, 073
063

028, 029, 030,
052, 053, 031,
069

047, 062
051, 032

Cable Box CODES

Puser
RCA
Realistic
Regal

Regency
Rembrandt

Samsung
Scientific Atlanta
SLMark
Sprucer
Stargate

Telecaption
Teleview
Texscan

Tocom
Toshiba
Unika

Universal
Videoway
Viewstar
Zenith
Zenith/Drake

Satellite

032
061, 070
032
058, 064, 040,

041, 042, 045,
068
034

037, 032, 051,
038

051
057, 058, 059
051, 047
051, 056
032, 051

067
047, 051
044
035, 036, 066
050
032, 025

022, 032
052
029, 030
063, 046
046

Digital
Satellite
Systems

Echostar

Express VU

G.E.
G.I.
Gradiente

Hitachi

HNS (Hughes)

Panasonic
Philips

Primestar

Proscan
RCA
Sony
Star Choice
Toshiba
Uniden

CODES

100, 113, 114,
115

100, 113

106
108

112
104, 111

104
105
102, 103

108

106, 109, 110
106, 109, 110

107
104, 108
101
102, 103

16

Remote Programming

VCR Codes

The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,
rewind, pause, record, channel up/down operation.

1) Find the VCR brand from the list of codes shown below.

2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.

3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10

key pad.

4) Release the D

• If your VCR does not respond to the first code, try the others listed. If it does not respond to

any of the codes, try the search codes function on page 19.

• After you program your remote, some VCR buttons may not work properly. If so, use the

VCR’s remote.

• To record, hold down the REC button on the remote and press PLAY.

ISPLAY button, and confirm the operation of the VCR.

VCRs CODES

Admiral
Aiwa
Akai

Audio Dynamic
Bell & Howell
Broksonic
Canon
CCE
Citizen
Craig
Curtis Mathes

Daewoo

DBX
Dimensia
Emerson

Fisher

Funai

G.E.
Go Video

Goldstar
Gradiente

Hitachi

Instant Replay
Jensen
JVC

Kenwood

LXI 027, 064, 058,

Magnavox

035
027, 032, 095
029, 072, 073,

074
003, 005
063, 071
020, 026, 094
023, 025
043
064
063, 029, 064
045, 024, 027,

093
043, 059, 024,

092
003, 004, 005
045, 093

043, 026, 077,
061, 025, 042,
020, 076

063, 066, 067,
065, 071, 091

027, 026, 020,
000

033, 045, 024
037, 051, 049,

050, 089
064
083, 084, 081,

000, 001
023, 045, 058,

027, 081, 093

024, 023
003
000, 001, 002,

003, 004, 005
003, 004, 064,

005

065, 066, 063,
067

031, 023, 024,
086

VCRs CODES

Marantz
Marta
Memorex
MGA

Minolta
Mitsubishi

Multitech
NEC

Olympic
Optimus

Orion
Panasonic

Penney

Pentax

Philco

Philips

Pioneer

Proscan

Quasar

Radio Shack

RCA

Realistic 024, 063, 036,

003, 004, 005
064
024, 067
038, 040, 047,

048, 041, 042
058, 045, 093
038, 040, 047,

048, 041, 042,
078, 090

047, 027, 062
003, 004, 005,

000
024, 023

028, 021, 035,
064
026, 020

023, 024, 021,
022

024, 058, 045,
063, 003, 004,
005, 093

058, 005, 045,
093

031, 024, 027,
023, 026, 020,
043

031, 023, 024,
086

023
045, 058, 023,

024, 031, 046,
059, 060, 033,
087, 093

021, 022, 023,
024

033, 024, 063,
036, 067, 040,
027

033, 045, 058,
023, 024, 031,
046, 059, 060,
083, 084, 085,
087, 093

067, 040, 027

VCRs CODES

Samsung

Samtron
Sansui

Sanyo

Scott

Sears

Shintom
Sharp

Signature 2000
Singer
Sony

SV 2000
Sylvania

Symphonic
Tashiro
Tatung
Tea c

Technics

Teknika
Toshiba
Vector Research
Wards

Yamaha 063, 003, 004,

Zenith 044, 082, 064,

037, 060, 062,
033, 089

089
003, 026, 020,

052
063, 067, 091,

071
059, 060, 062,

067, 038, 040,
047, 048, 026,
020

063, 064, 065,
066, 058, 000,
001
075

035, 036, 080,
088
027, 035

075
028, 029, 030,

053, 054, 055
027
031, 023, 024,

027
027, 081

064
003, 004, 005
003, 004, 027,

005
021, 022, 023,

024
024, 027, 070
059, 046, 079
005

035, 036, 067,
044, 064

005

094

17