JVC RK-C28E1S, RK-C32E1S User Manual
A
x3
E
x2
REAR LEG
FRONT PROFILE
LEFT
RIGHT
CLAMP
X 4
PLASTIC SHELF
X 2
TV STAND
RK-C28E1S
RK-C32E1S
ASSEMBLY INSTRUCTIONS
(TO BE RETAINED BY CUSTOMER)
IMPORTANT NOTES
THIS STAND MUST BE USED ONLY WITH THE TV WITH
WHICH IT IS SUPPLIED
DO NOT USE ANY SCREWS OTHER THAN THOSE PROVIDED
DO NOT USE SOLVENTS FOR CLEANING THIS STAND. USE A
DAMP CLOTH TO REMOVE ANY HANDLING OR PACKAGING MARKS
DO NOT ATTEMPT TO MOVE THE ASSEMBLY WITH TV ATTACHED
AS THIS MAY RESULT IN PERSONAL INJURY AND OR DAMAGE TO
YOUR EQUIPMENT.
B
C
D
Also Required
x12
x4
x3
F
G
H
J
FIXING KIT - GA30096-001A-U
x3
x3
x2
x2
x1
GA20010-001A-U
LEFT - 28”
GA10138-001A-U
RIGHT - 28”
GA10139-001A-U
LEFT - 32”
GA10140-001A-U
RIGHT - 32”
GA10141-001A-U
GA40087-001A-U
METAL LEGS
LEFT
28”
GA20088-001A-U
32”
GA20093-001A-U
GA20091-001A-U
RIGHT
28”
GA20089-001A-U
32”
GA20094-001A-U
1
Cx4
Gx3
Fx3
Dx3
Ax3
2
NOTE !
IF YOU EXPERIENCE ANY PROBLEM
WITH YOUR STAND PLEASE REFER
TO THE SERIAL No. LOCATED ON THE
BACK OF THE STAND AND REPORT
TO YOUR DEALER.
Bx4
3
Jx2
Bx8
MANT0313-P1-01 GA30097-001A-U
4
5
GAP
2
Hx2
Ex2
6
1
ASSEMBLY TIP !
IF YOU EXPERIENCE A GAP BETWEEN
THE PLASTIC LEG COVERS AND TV
PLEASE UN-TIGHTEN THE SCREWS,
ADJUST AS SHOWN AND RE-TIGHTEN
SCREWS.
NO GAP
ASSEMBLY TIP !
IF THERE IS EXCESSIVE OVERHANG OF THE TV AS SHOWN
PLEASE ADJUST BY UN-SCREWING THIS SCREW UNTIL
THE TV AND STAND LEGS ARE ALIGNED
MANT0313-P2-01 GA30097-001A-U
Loading...