JVC LM-150, LM-170 User Manual

LCD DISPLAY MONITOR
ENGLISH

LM-170 LM-150

INSTRUCTIONS
The illustration of the monitor is of LM-170.

Safety Precautions

IMPORTANT SAFEGUARDS

• All the safety and operating instructions should be read before the product is operated.
• The safety and operating instructions should be retained for future reference.
• All warnings on the product and in the operating instructions should be adhered to.
• All operating instructions should be followed.
FCC NOTICE (U.S.A. only) CAUTION: Changes or modifications not approved by JVC could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
2
POWER CONNECTION
The power supply voltage rating of this product is AC 100 – 240 V. The power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure safety and EMC regulations of each countries.
For U.S.A. and Canada: AC 120 V
• This product is equipped with a grounding-type plug to satisfy FCC rule. If you are unable to insert the plug into the outlet, contact your electrician.
For European and Asian countries: AC 220 – 240 V
For United Kingdom: AC 220 – 240 V
• This product should be operated only with the type of power source indicated on the label. If you are not sure of the type of power supply of your home, consult your product dealer or local power company.
Warning:
• Do not use the same power cord for AC 120 V as for AC 220 – 240 V. Doing so may cause malfunction, electric shock or fire.
ENGLISH
Note for United Kingdom power cord only
The plug on United Kingdom power cord has a built-in fuse. When replacing the fuse, be sure to use only a correctly rated approved type, re-fit the fuse cover. (Consult your dealer or qualified personnel.)
How to replace the fuse
Open the fuse compartment with the blade screwdriver, and replace the fuse.
Fuse
3
Safety Precautions (cont.)
• Make enough room for inserting or removing the power plug. Place the product as close to the outlet as possible. The main power supply for the product is controlled by inserting or removing the power plug.
• When the product is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cables.
• Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock.
• Use only the accessory cord designed for this product to prevent shock.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltages and other hazards. Refer all service to qualified service personnel.
• Do not put heavy objects on the product.
• Do not rest your arm on the product or lean against the product.
• Do not hang on the product when installing the product on the wall.
The illustration of the monitor is of LM-170.
• When the product is used on a table with casters, lock the casters to prevent the product from falling over.
• Do not use the monitor for a long time if the sound is distorted. (LM-170 only)
• Do not use this product near water.
• Do not use immediately after moving from a low temperature to high temperature, as this causes condensation, which may result in a fire, electric shock, or other hazards.
When installing the monitor on a stand Unit: mm (inch)
Front view Side view
100
(4)
100 (4)
100
(4)
100 (4)
• Leave the following distance of space (minimum) around the monitor (see diagram below).
This product may become hot during use. To avoid
overheating, keep enough space around the product and take enough care when handling the product.
When installing the monitor on the wall
Front view Side view
100 (4)
100
(4)
100 (4)
100
(4)
Unit: mm (inch)
50 (2)
4
• Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock.
• Never spill liquid of any kind on the product.
Under the following conditions,
1. Turn off the power.
2. Unplug this product from the wall outlet.
3. Refer service to qualified service personnel.
a) When the product emits smoke or unusual smell. b) When the product exhibits a distinct change
in performance —for example, no picture or no sound.
c) If liquid has been spilled, or objects have fallen on
the product. d) If the product has been exposed to rain or water. e) If the product has been dropped or damaged in
any way. f) When the power supply cord or plug is damaged.
• Slots and openings in the cabinet are provided
for ventilation. These ensure reliable operation of the product and protect it from overheating. These openings must not be blocked or covered.
• The openings should never be blocked by placing
the product on bed, sofa, rug, or similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer’s instructions have been adhered to.
ENGLISH
Do not install this product in the following places:
• in a damp or dusty room
• where the product is exposed to soot or steam,
such as near the cooking counter or a humidifier
• near heat sources
• where condensation easily occurs, such as near
the window
• When connecting other products such as VCR’s
and personal computers, you should turn off the power of this product for protection against electric shock.
• Do not use attachments not recommended by the
product manufacturer as they may be hazardous.
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or equivalents. Unauthorized substitutions may result in fire, electric shock, or other hazards.
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
5
Safety Precautions (cont.)

Maintenance

Unplug this product from the wall outlet before cleaning.
Screen
To avoid irreparable change in appearance of the screen such as uneven color, discoloration, scratches, be careful about the following:
• Do not paste or stick anything with any glues or adhesive tapes.
• Do not write anything on the screen.
• Do not strike the screen with a hard object.
• Avoid condensation on the screen.
• Do not wipe the screen with solvent such as alcohol, thinner, or benzine.
• Do not wipe the screen hard.
If the screen gets stained, wipe it with a soft dry cloth, a soft damp cloth, or a soft cloth soaked in water-diluted neutral detergent and wrung well.
Cabinet
To avoid the deterioration or damages of the cabinet such as its paint’s peeling away, be careful about the following:
• Do not wipe the cabinet using solvent such as alcohol, thinner, or benzine.
• Do not expose the cabinet to any volatile substance such as insecticides.
• Do not remain any rubber or plastic in contact for a long time.
• Do not wipe the cabinet hard.
Wipe stains off the cabinet with a soft cloth. If the cabinet gets heavily stained, wipe it with a soft cloth soaked in water-diluted neutral detergent and wrung well, and then wipe with a soft dry cloth.
Ventilation openings
• Use a vacuum cleaner to get rid of the dust around the intakes (all the openings). If a vacuum cleaner is not available, use a cloth and wipe it off. Leaving the dust around the intakes may raise up the internal heat and cause damage to the product.
Information for Users on Disposal of Old Equipment
[European Union]
This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling of electrical and electronic equipment for proper treatment, recovery and recycling in accordance with your national legislation.
By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health which could otherwise be caused by inappropriate waste handling of this product. For more information
Attention:
This symbol is only valid in the European Union.
about collection point and recycling of this product, please contact your local municipal office, your household waste disposal service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
(Business users)
If you wish to dispose of this product, please visit our web page www.jvc-europe.com to obtain information about the take-back of the product.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment.
6

Contents

Safety Precautions ........................................................ 2
IMPORTANT SAFEGUARDS ................................... 2
Maintenance ............................................................. 6
Controls and Features .................................................. 8
Front panel ............................................................... 8
Rear panel .............................................................. 10
Installation ................................................................... 11
Using the monitor on the stand ............................... 11
Installing the monitor on the wall ............................ 12
Installing the monitor on the rack ............................ 12
How to Use the MAIN MENU ....................................... 13
MAIN MENU items ................................................. 13
How to Use the SET-UP MENU ................................... 14
ENGLISH
SET-UP MENU items .............................................. 15
How to Use the External Control ............................... 17
About the external control ....................................... 17
How to use the MAKE/TRIGGER terminal ............. 17
Troubleshooting .......................................................... 18
Specifications .............................................................. 20
Dimensions ............................................................. 21
Available computer signals ..................................... 22
7
Loading...
+ 15 hidden pages