As an “ENERGY STAR®” partner, JVC has determined that
this product or product model meets the “ENERGY STAR®”
guidelines for energy efficiency.
Please read the important notice for energy efficiency on page 7.
Important Note:
In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this
guide. Keep this user’s guide in a convenient place for future reference. Keep the carton
and original packaging for future use.
Serial Number:
Model Number:
LCT2520-002C-A
0709TMH-II-IM
Warnings
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock. Do
not remove cover (or back). No user serviceable
parts inside. Refer servicing to qualified service
personnel.
The lightning flash with arrowhead
symbol, within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the
appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES
REGARDING THE USE OF THIS UNIT.
1. Operate only from the power source specified on the unit.
2. Avoid damaging the AC plug and power cord.
3. Avoid improper installation and never position the unit where good ventilation is unattainable.
4. Do not allow objects or liquid into the cabinet openings.
5. In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair
it yourself or remove the rear cover.
Changes or modifications not approved by JVC could void the warranty.
* When you don’t use this TV set for a long period of time, be sure to disconnect both the
power plug from the AC outlet and antenna for your safety.
* To prevent electric shock do not use this polarized plug with an extension cord, receptacle or
other outlet unless the blades can be fully inserted to prevent blade exposure.
IMPORTANT RECYCLING INFORMATION
This product has a fluorescent lamp that contains mercury. Disposal
of these materials may be regulated in your community due to
environmental considerations. For disposal or recycling information,
please contact your local authorities or for USA, the Electronic Industries
Alliance: http://www.eiae.org
Do not attempt to service the product yourself
CautionTo prevent electrical shock, do not open the cabinet.
There are no user serviceable parts inside.
Please refer to qualifi ed service personnel for repairs.
2
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
16) Place the television on a stable, flat surface. Failure to do so can result in the television
falling, causing injury.
17) Do not allow young children to play around or on the television. Do not hang from the TV.
Failure to do so can result in the television falling, causing injury.
18) Do not allow young children to play with the plastic bag that came with the television when
you unpacked it. Failure to do so can result in suffocation, causing injury.
19) Avoid improper installation and never position the unit where good ventilation is
impossible. When installing this TV, distance recommendations must be maintained
between the set and the wall, as well as inside a tightly enclosed area or piece of furniture.
Keep to the minimum distance guidelines shown for safe operation.
150 mm
5 7/8 in
200 mm
7 7/8 in
150 mm
5 7/8 in
200 mm
7 7/8 in
50 mm
2 in
3
Important Safety Instructions
20) Cautions for installation— Do not tilt the TV towards the left or right, or towards the back.
— Install the TV in a corner on the floor so as to keep cords out of the way.
— The TV will generate a slight amount of heat during operation. Ensure that
sufficient space is available around the TV to allow satisfactory cooling.
— Have two people remove the TV from the box with the screen facing away
from you. It's possible your clothing, (such as a belt buckle or button) may
scratch the front of the TV. Do the same when moving the TV to another
location.
21) When attaching to a wall, use the optional JVC wall mounting unit.For LT-32J300 / LT-32JM30: JVC-XUF-2637 LCD FLAT WALL MOUNTFor LT-42J300: JVC-XUF-2637 LCD FLAT WALL MOUNTFor LT-46J300: JVCPCM-MS2 TILT/FLAT WALL MOUNT
Caution
— Consult qualified installers.— See the included manual on mounting procedures.— JVC is not responsible for damages or injuries due to improper mounting.— Use with other wall mounting unit is capable of resulting in instability or causing possible
injury.
22) Make enough room for inserting and removing the power plug. Place the TV as close
to the outlet as possible. The main power supply for this TV is controlled by inserting or
removing the power plug.
23) Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
24) When this TV is connected to the wall outlet, it is always on standby even when all the LED
lamps are not lit. To shut down the TV, unplug the TV from the wall outlet.
FCC Notice:
Caution: Changes or modifi cations not expressly approved by party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
Your JVC TV is equipped with many features. Here is some key features
highlighted in detail.
1Stunning picture quality via 1920x1080 Full HD panel.
Dynamic Gamma and Color Management give further
fi ne tuned picture reproduction. Smart Picture adjusts the
best possible picture quality automatically scene by scene
based on the incoming signal from any source!
2JVC exclusive oblique cone speakers provide excellent
TV sound quality. OmniSurround sound provides you 4
different settings based on the program you are watching.
The equalizer will fi ne tune your listening preferences.
3Full connectivity with 3 HDMI, 2 Component, 1 S-video and others. The variety of
connections are explained in pages 44 to 49.
x 3x 2
x 1
4Aspect mode will show every pixel you are getting in High Defi nition. The Full Native mode
will show 100% of 1080p. Full – with slight overscan. Panorama, Cinema will fi ll the screen
with various aspect settings.
Full or Widescreen Mode
6
Logos & Licenses
Getting started
As an “ENERGY STAR®” partner, JVC has determined that
this product or product model meets the “ENERGY STAR
guidelines for energy efficiency.
This JVC Television is factory set to “Home” mode, which is optimized for normal home viewing.
This setting reduces power consumption to help the environment and to comply with ENERGY
®
qualifi cation.
STAR
Enabling certain features and functionality in this TV (e.g., Video Status) may increase its energy
consumption, possibly beyond the limits required for ENERGY STAR
Manufactured under license from Dolby Laboratories. "Dolby", and
the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI Logo and High-Defi nition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
Notice:
• The open source software is embedded in this product. For more information, please go to:
http://software.jvc.com/opensource/lnx/DP/08_AtscQam_T/download.html
®
qualifi cation.
®
”
7
+
AAA Alkaline
–
+
AAA Alkaline
–
Package Contents
Television x 1
Remote Control x 1
AAA Batteries x 2
Insert the batteries
Use two “AAA” batteries (included).
Place the "–" end in the unit first, making sure the "+" and "–" markings are correct. Place the
"–" end in the unit first.
If this symbol is shown, it is only
valid in the European Union
8
Caring for the frame and stand
Your TV has a glossy frame and stand which have protection sheets attached to them. Peel
them off before use, but only after the TV has been properly placed. Take care with handling
the glossy frame and stand because these surfaces are delicate.
Normally, light dusting with a soft, non-scratching duster will keep your TV clean.
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly
moistened with water. You can add a few drops of mild liquid detergent to the water to help
remove spots of oily dirt.
• DO NOT allow liquid to enter the TV through the ventilation slots.
• DO NOT use strong or abrasive cleaners on the TV.
• DO NOT spray liquids or cleaners directly on the TV’s surface.
• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.
Frame
Stand
Getting started
Caring for the Screen
The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.
• DO NOT apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the
screen. These will remove the coating layer and cause discolorations.
• DO NOT push or hit the screen. This could cause scratches on the screen surface and image
distortions.
9
Package Contents
Avoiding Temporary Burn-in
Displaying fi xed images for extended periods of time can leave a subtle but temporary burn-in
image on your screen. To avoid this, mix your viewing pattern.
Examples include, but are not limited to the following:
• Stock-market report bars
• Shopping channel logos and pricing
displays
• Video game patterns or scoreboards
• Bright station logos
• Internet web sites or other computer-style
images
• DVD discs, video tapes, laser discs
• Broadcast, cable, satellite channels or
digital television tuners/converters
TV on
Disconnecting the back panel screw
The LT-46J300 has one screw on the back panel hole for safety use. Please remove the screw
when you are attaching a wall mounting unit and placing the TV onto a wall.
For example...
TV off
XYZXYZ
10
Install your TV
To prevent the TV from falling, thread the belt through the hole on the back of the stand and
secure it to the TV rack.
Hole
Belt and screw (not included)
Tidying the cables
A cable holder which keeps your connection cables tidy is attached to the back of the stand.
Getting started
Connect the stand
The LT-32J300 / LT-32JM30 TV stand is not attached to the TV when you purchased it. Please
follow the steps below on how to connect the stand to the TV.
1) Insert the TV stand onto the TV.
2) Tighten the 5 screws to the back of the
TV.
11
Package Contents
Disconnecting the stand
1) Place the TV face down on a soft cloth on a table.
2) Remove the screws from the back of the TV.
3) Pull out the stand from the TV.
Notes:
• To re-install the stand, reverse the procedure from 3) to 1).
• If you fi nd it diffi cult to remove the screws from inset screw wells, use a magnetized
screwdriver.
12
TV Basic Controls
Front Panel
Remote Control Sensor
1
Power Lamp
2
Basics
1
Side Panel
2
5
2
INPUT
MENU
CHANNEL
VOLUME
BACK
POWER
PHOTO VIEWER
Input
1
1
3
OK
4
6
Change the input
MENU
2
Used to access the TV’s onscreen
menus.
+CHANNEL–
3
Move sequentially through the
channels.
+VOLUME–
4
Raises or lowers the volume.
POWER
5
Turn the TV on or off.
Photo Viewer Connector
6
13
TV Basic Controls
Rear Panel
9
8
2
3
5
4
7
1
6
75 Ω
(VHF/UHF)
INPUT 1 INPUT 2 INPUT 3
14
HDMI™ Connector
1
* This is used when you are using
DVI analog audio
Before you connect your television to another device, please refer to the proper diagrams for
your specific TV and remote. These will help assist you in understanding how to connect your
television to another device, as well as use the remote to set up your television. Some of the
connection terminals are color coded for easy connection with the proper cables.
To find the best possible connection that your device can use, see pages 16 - 17.
For more detailed information about connecting external devices, see pages 44 - 49.