JVC LCT2518-001A-A, 1208TSH-II-IM User Manual

LCD Television Users Guide

1080p HDTV

LT-32P300
LT-42P300
LT-42PM30

32" class (31.5" Diagonal)

42" class (42" Diagonal)

42" class (42" Diagonal)

POWER

TIMER

TV STB VCR DVD AUDIO

MODE

INPUT

V1 V2 V3 V4 V5

TV DVD/DVR DBB TUNER USB

123

456

789

+

RETURN

TUNE

TV

0

– CH + – VOL +

iPod MUTING

B

U

A

N

C

OK

E

K

M

F

A

T

V

C

O

E

R

P

I

T

S

E

A

DVR

PCON

STATUS

VIDEO

GUIDE

SOUND

SUB CH ML/MTS DISPLAY

SUB T.

TV/VCR

iTV

RM-C1485

TV

As an “ENERGY STAR®” partner, JVC has determined that
this product or product model meets the “ENERGY STAR®”
guidelines for energy efficiency.

Please read the important notice for energy efficiency on page 7.

Important Note:

In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this
guide. Keep this user’s guide in a convenient place for future reference. Keep the carton
and original packaging for future use.

Serial Number:

Model Number:

LCT2518-001A-A

1208TSH-II-IM

Warnings

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: To reduce the risk of electric shock. Do
not remove cover (or back). No user serviceable
parts inside. Refer servicing to qualified service
personnel.

The lightning flash with arrowhead
symbol, within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.

The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the
appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES

REGARDING THE USE OF THIS UNIT.

1. Operate only from the power source specified on the unit.

2. Avoid damaging the AC plug and power cord.

3. Avoid improper installation and never position the unit where good ventilation is unattainable.

4. Do not allow objects or liquid into the cabinet openings.

5. In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair
it yourself or remove the rear cover.

Changes or modifications not approved by JVC could void the warranty.

* When you don’t use this TV set for a long period of time, be sure to disconnect both the

power plug from the AC outlet and antenna for your safety.

* To prevent electric shock do not use this polarized plug with an extension cord, receptacle or

other outlet unless the blades can be fully inserted to prevent blade exposure.

IMPORTANT RECYCLING INFORMATION

This product has a fluorescent lamp that contains mercury. Disposal of these materials
may be regulated in your community due to environmental considerations. For disposal
or recycling information, please contact your local authorities or for USA, the Electronic

Industries Alliance: http://www.eiae.org

Do not attempt to service the product yourself

Caution
To prevent electrical shock, do not open the cabinet.
There are no user serviceable parts inside.
Please refer to qualifi ed service personnel for repairs.

2

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's

instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.

15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,

such as vases, shall be placed on the apparatus.

16) Place the television on a stable, flat surface. Failure to do so can result in the television

falling, causing injury.

17) Do not allow young children to play around or on the television. Do not hang from the TV.

Failure to do so can result in the television falling, causing injury.

18) Do not allow young children to play with the plastic bag that came with the television when

you unpacked it. Failure to do so can result in suffocation, causing injury.

19) Avoid improper installation and never position the unit where good ventilation is

impossible. When installing this TV, distance recommendations must be maintained
between the set and the wall, as well as inside a tightly enclosed area or piece of furniture.
Keep to the minimum distance guidelines shown for safe operation.

150 mm

5 7/8 in

200 mm

7 7/8 in

150 mm

5 7/8 in

200 mm

7 7/8 in

50 mm

2 in

3

Important Safety Instructions

20) Cautions for installation
— Do not tilt the TV towards the left or right, or towards the back.

— Install the TV in a corner on the floor so as to keep cords out of the way.
— The TV will generate a slight amount of heat during operation. Ensure that

sufficient space is available around the TV to allow satisfactory cooling.

— Have two people remove the TV from the box with the screen facing away

from you. It's possible your clothing, (such as a belt buckle or button) may
scratch the front of the TV. Do the same when moving the TV to another
location.

21) When attaching to a wall, use the optional JVC wall mounting unit.
For LT-32P300: JVC-XUF-2637 LCD FLAT WALL MOUNT
For LT-42P300 / LT-42PM30: JVC-XUF-2637 LCD FLAT WALL MOUNT
Caution
— Consult qualified installers.
— See the included manual on mounting procedures.
— JVC is not responsible for damages or injuries due to improper mounting.
— Use with other wall mounting unit is capable of resulting in instability or causing possible

injury.

22) Make enough room for inserting and removing the power plug. Place the TV as close
to the outlet as possible. The main power supply for this TV is controlled by inserting or
removing the power plug.

23) Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

24) When this TV is connected to the wall outlet, it is always on standby even when all the LED

lamps are not lit. To shut down the TV, unplug the TV from the wall outlet.

FCC Notice:

Caution: Changes or modifi cations not expressly approved by party responsible for

compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV technician for help.

4

Table of Contents

Warnings . . . . . . . . . . . . . . . . . . 2

Important Safety Instructions . . . 3

Getting Started

Key Features . . . . . . . . . . . . . . . 6

Logos & Licenses . . . . . . . . . 7

Package Contents . . . . . . . . . 8

Basics

TV Basic Controls . . . . . . . . . . . 13

Remote Control . . . . . . . . . . . . . 18

Initial Setup . . . . . . . . . . . . . . . 22

Advanced

Customizing your TV . . . . . . . 24

Picture . . . . . . . . . . . . . . . . . 26

Video Status . . . . . . . . . . . . . . . . 26

Color Temp . . . . . . . . . . . . . . . . 27

Color Management . . . . . . . . . . . . . 27

Dynamic Gamma . . . . . . . . . . . . . . 27

Smart Picture . . . . . . . . . . . . . . . . 27

Digital VNR . . . . . . . . . . . . . . . . . 27

MPEG NR . . . . . . . . . . . . . . . . . 27

Natural Cinema . . . . . . . . . . . . . . . . . 27

Video Reset . . . . . . . . . . . . . . . . . 27

Display . . . . . . . . . . . . . . . . 28

Video Input Label . . . . . . . . . . . . . . 28

Photo Viewer . . . . . . . . . . . . . . . . 28

Aspect . . . . . . . . . . . . . . . . . . . . 30

TV . . . . . . . . . . . . . . . . . 31

Closed Caption . . . . . . . . . . . . . . . . 31

C.C. Type . . . . . . . . . . . . . . . . . . . 31

C.C. Setting . . . . . . . . . . . . . . . . . . . 31

Tuner Mode . . . . . . . . . . . . . . . . 32

Auto Scan . . . . . . . . . . . . . . . . 32

Add Channel . . . . . . . . . . . . . . . . 32

Edit Channel . . . . . . . . . . . . . . . . 33

V-Chip . . . . . . . . . . . . . . . . 33

Password . . . . . . . . . . . . . . . . 34

MPAA . . . . . . . . . . . . . . . . 35

Can. Eng. . . . . . . . . . . . . . . . . 36

Can. Fre. . . . . . . . . . . . . . . . . 36

TVPG . . . . . . . . . . . . . . . . . 37

Guide . . . . . . . . . . . . . . . . 37

PC . . . . . . . . . . . . . . . . . 38

Auto Adjustment . . . . . . . . . . . . . 38

Phase Adjustment . . . . . . . . . . . . 38

PC H-Position . . . . . . . . . . . . . . . . 38

PC V-Position . . . . . . . . . . . . . . . . 38

Reset . . . . . . . . . . . . . . . . . . 38

Sound . . . . . . . . . . . . . . . . . 39

MTS . . . . . . . . . . . . . . . . 39

Digital Audio (ML) . . . . . . . . . . . . 39

Surround . . . . . . . . . . . . . . . . 39

Sound Status . . . . . . . . . . . . . . . . 39

Audio Reset . . . . . . . . . . . . . . . . 39

Power . . . . . . . . . . . . . . . . . 40

Power Indicator . . . . . . . . . . . . 40

Illumination . . . . . . . . . . . . . . . . 40

Setting . . . . . . . . . . . . . . . . . 41

Plug-In Menu . . . . . . . . . . . . . . . . 41

Time Zone . . . . . . . . . . . . 41

D.S.T. . . . . . . . . . . . . . . . . 41

Language . . . . . . . . . . . . . . . . 41

Noise Mute . . . . . . . . . . . . 41

Front Panel Lock . . . . . . . . . . . . 41

Transparency . . . . . . . . . . . . 41

Auto Shut Off . . . . . . . . . . . . . . . . 41

Control with HDMI . . . . . . . . . . . . . 42

System Info . . . . . . . . . . . . . . . . 42

Auto Demo . . . . . . . . . . . . 42

Optical Out . . . . . . . . . . . . 43

PC Smart Input . . . . . . . . . . . 43

Sync Mode . . . . . . . . . . . . . . 43

Enjoy Movies/Music from your

iPod . . . . . . . . . . . . . . . . . . 44

Programming Your Remote . . . . 51

Etc.

Programming Codes . . . . . . . 53

Connecting Your Devices . . . . . 58

Troubleshooting . . . . . . . . . . . . 64

Specifi cations . . . . . . . . . . . . 66

Warranty . . . . . . . . . . . . 67

5

Key Features

Your JVC TV is equipped with many features. Here is some key features
highlighted in detail.

1 Simple playback of video and music on

TV. You can charge your iPod. You
can watch a program while listening
to the iPod (source of program must
be from TV’s Internal Tuner). You
can view photos from the iPod while
listening to the iPod.

2 Stunning picture quality via 1920x1080 Full HD panel.

Dynamic Gamma and Color Management give further
fi ne tuned picture reproduction. Smart Picture adjusts the
best possible picture quality automatically scene by scene
based on the incoming signal from any source!

3 JVC exclusive oblique cone speakers provide excellent

TV sound quality. OmniSurround sound provides you 4
different settings based on the program you are watching.
The equalizer will fi ne tune your listening preferences.

Dock Adapter

Dock

4 Full connectivity with 3 HDMI, 2 Component, 1 S-video and others. The variety of

connections are explained in pages. 58 to 63.

x 3 x 2

x 1

5 Aspect mode will show every pixel you are getting in High Defi nition. The Full Native mode

will show 100% of 1080p. Full – with slight overscan. Panorama, Cinema will fi ll the screen
with various aspect settings.

Full or Widescreen Mode

6

Logos & Licenses

Getting started

As an “ENERGY STAR®” partner, JVC has determined that
this product or product model meets the “ENERGY STAR
guidelines for energy efficiency.

This JVC Television is factory set to “Home” mode, which is optimized for normal home viewing.
This setting reduces power consumption to help the environment and to comply with ENERGY

®

qualifi cation.

STAR

Enabling certain features and functionality in this TV (e.g., Video Status) may increase its energy
consumption, possibly beyond the limits required for ENERGY STAR

iPod is a trademark of Apple Inc.,
registered in the U.S. and other countries.

Manufactured under license from Dolby Laboratories. "Dolby", and
the double-D symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI Logo and High-Defi nition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.

®

qualifi cation.

®

”

Notice:

• The open source software is embedded in this product. For more information, please go to:
http://software.jvc.com/opensource/lnx/DP/08_AtscQam_T/download.html

7

Package Contents

Television x 1

Remote Control x 1

POWER

TIMER

TV STB VCR DVD AUDIO

MODE

INPUT

V1 V2 V3 V4 V5

TV DVD/DVR DBB TUNER USB

123

456

789

+

RETURN

TUNE

TV

0

– CH + – VOL +

iPod MUTING

B

U

A

N

C

OK

E

K

M

F

A

T

V

C

O

E

R

P

I

T

S

E

A

DVR

PCON

STATUS

VIDEO

GUIDE

SOUND

SUB CH ML/MTS DISPLAY

SUB T.

TV/VCR

iTV

RM-C1485

TV

Bottom Cover x 1

AA Batteries x 2

+

+

AA Alkaline

AA Alkaline

–

–

Screw x 1

Insert the batteries

Use two “AA” batteries (included).

Place the "–" end in the unit first, making sure the "+" and "–" markings are correct. Place the
"–" end in the unit first.

If this symbol is shown, it is only
valid in the European Union

8

Caring for the frame and stand

Your TV has a glossy frame and stand which have protection sheets attached to them. Peel
them off before use, but only after the TV has been properly placed. Take care with handling
the glossy frame and stand because these surfaces are delicate.

Normally, light dusting with a soft, non-scratching duster will keep your TV clean.
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly
moistened with water. You can add a few drops of mild liquid detergent to the water to help
remove spots of oily dirt.

• DO NOT allow liquid to enter the TV through the ventilation slots.

• DO NOT use strong or abrasive cleaners on the TV.

• DO NOT spray liquids or cleaners directly on the TV’s surface.

• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.

Frame

Stand

Getting started

Caring for the Screen

The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.

• DO NOT apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the

screen. These will remove the coating layer and cause discolorations.

• DO NOT push or hit the screen. This could cause scratches on the screen surface and image

distortions.

9

Package Contents

Avoiding Temporary Burn-in

Displaying fi xed images for extended periods of time can leave a subtle but temporary burn-in
image on your screen. To avoid this, mix your viewing pattern.

Examples include, but are not limited to the following:

• Stock-market report bars

• Shopping channel logos and pricing

displays

• Video game patterns or scoreboards

• Bright station logos

• Internet web sites or other computer-style

images

• DVD discs, video tapes, laser discs

• Broadcast, cable, satellite channels or

digital television tuners/converters

TV on

For example...

TV off

XYZ XYZ

10

Install your TV

To prevent the TV from falling, thread the belt through the hole on the back of the stand and
secure it to the TV rack.

Hole

Belt and screw (not included)

Tidying the cables

A cable holder which keeps your connection cables tidy is attached to the back of the stand.

Getting started

Connect the stand

The LT-32P300 TV stand is not attached to the TV when you purchased it. Please follow the

steps below on how to connect the stand to the TV.

1) Insert the TV stand onto the TV.

2) Tighten the 5 screws to the back of the

TV.

11

Package Contents

Disconnecting the stand

If you disconnect the stand, attach the bottom cover and the screw (supplied) into the hole.

1) Place the TV face down on a soft cloth on a table.

2) Remove the screws from the back of the TV.

3) Pull out the stand from the TV.

4) Cover the hole with the supplied bottom cover and tighten the screw.

Notes:

• To re-install the stand, reverse the procedure from 4) to 1).

• If you fi nd it diffi cult to remove the screws from inset screw wells, use a magnetized
screwdriver.

12

TV Basic Controls

Front Panel

1

3

Side Panel

4

2

Diffuser Illumination

1

Dock

2

Notes:

• Do not use unreasonable force to the
Dock.

• When not using the Dock, close the
cover.

• Do not touch the connector pins of the
Dock or the iPod terminal pins.

• Do not put different devices on the
Dock. It may cause a connection
failure.

Remote Control Sensor

3

Power Lamp

4

Basics

INPUT

MENU

1

2

CHANNEL

OK

VOLUME

BACK

5

POWER

PHOTO VIEWER

3

4

6

Input

1

Change the input

MENU

2

Used to access the TV’s onscreen
menus.

+CHANNEL–

3

Move sequentially through the
channels.

+VOLUME–

4

Raises or lowers the volume.

POWER

5

Turn the TV on or off.

Photo Viewer Connector

6

Note:

• Do not use Photo Viewer connector
to connect the iPod

13

TV Basic Controls

Rear Panel

9

8

2

3

5

7

4

10

1

6

75 Ω

(VHF/UHF)

INPUT 1 INPUT 2 INPUT 3

14

HDMI™ Connector

1

* This is used when you are using

HDMI analog audio

Before you connect your television to another device, please refer to the proper diagrams for
your specific TV and remote. These will help assist you in understanding how to connect your
television to another device, as well as use the remote to set up your television. Some of the
connection terminals are color coded for easy connection with the proper cables.

To find the best possible connection that your device can use, see pages 16 - 17.

For more detailed information about connecting external devices, see pages 58 - 63.

Basics

1

2

3

5

6

7

8

HDMI
(INPUT 1, 2, or 3)

HDMI ANALOG AUDIO

Composite / Component

4

(INPUT 4 or 5)

S-Video

Antenna / Cable

DIGITAL AUDIO
OPTICAL OUT

AUDIO OUT

DVD Player

Video Camera

PC (with HDMI)

Audio System

STB (Digital Cable,
satellite) Tuner Box

Game Console

9

10

D-SUB

USB type B (for PC)
See page 50.

PC

15

TV Basic Controls

Video

Best

Video Connection Connection Cable TV Connection

HDMI HDMI Cable INPUT 1, 2 or 3

Good

Audio

Best

DVI + Audio

Component

Video + Audio

S-Video + Audio

Composite

Video + Audio

Audio Connection Connection Cable TV Connection

OPTICAL INPUT

DVI – HDMI Cable,

Audio Cable

Component

Video + Audio INPUT 4 or 5

S-Video Cable,

Audio Cable

Composite

Video + Audio INPUT 4 or 5

OPTICAL AUDIO

Cable

Input 1 +

HDMI ANALOG AUDIO

INPUT 4 +

AUDIO Input

DIGITAL AUDIO

OPTICAL OUT

16

Good

AUDIO INPUT

(L / R)

Audio Cable

AUDIO OUT

(L / R)

Compatible Signal Notes

Input

• HDMI (Digital)
SD: 480i, 480p
HD : 720p, 1080i, 1080p/24Hz,

1080p/30Hz, 1080p/60Hz

Audio L/R

HDMI™ (v.1.3, HDMI™ CEC Support)

Please usa a High Speed HDMI™ Cable.
High Speed HDMI™ Cable are tested to
carry an HD signal up to 1080p and higher.

See pages 62, 63.

Input

• DVI (Digital)
SD: 480i, 480p
HD : 720p, 1080i, 1080p/24Hz,

1080p/30Hz, 1080p/60Hz

• Audio L/R (Analog)

Input

• Component (Analog)
SD: 480i, 480p
HD: 720p, 1080i

• Audio L/R (Analog)

Input

• S-Video (Analog)

• Audio L/R (Analog)

Input

• Composite (Analog)

• Audio L/R (Analog)

Compatible Signal Notes

Basics

See page 61, 63.

See page 59.

See pages 59, 61.

See page 59.

Output

• Audio L/R (Digital)
(PCM or Dolby Digital)

Output

• Audio L/R (Analog)
(Fixed)

See page 60.

See page 60.

17

Remote Control

+

The following pages gives you a brief description of each button’s function.
This remote can also control up to four other devices. See pages 51 - 52.

Allows you to set the TV to turn on and set the TV to turn off
automatically after a set amount of time and channel of your choice.

On Timer / Input / Sleep Timer

Timer

TIMER

POWER

TV STB VCR DVD AUDIO

MODE

V1 V2 V3 V4 V5

123

456

789

TUNE

RETURN

TV

0

On Timer

Input

Sleep Timer

0 h 0 m

0 - 0

0 min

Notes:

¥ 

• If you set the interval of On Timer by pressing the

buttons,

select channel at Input and press OK.

• After you set On Timer and turn off the TV, power lamp lights.

• You can check the remaining time of On Timer by displaying
this menu again.

• You can set the interval of Sleep Timer by pressing the ¥



buttons.

• 60 seconds before the TV turns off, a message will appear and it
will count the remaining time.

• See page 50, “On Timer using iPod”.

Turns the TV on or off.

Switch between “TV / STB / VCR / DVD / AUDIO devices.
See page 51.

Switch between devices connected to Video-1, 2, 3, 4 and 5. For
V4 (Video-4) and V5 (Video-5) you must select the signal input type
fi rst (ie. composite, S-Video, or component). To do so, you need
to press the V4 or V5 button until the correct type is highlighted.
Select “Composite 1” for composite video signal input, “S-Video”
for S-video signal input, or “Component 1” for component video
signal input. Select “Composite 2” for composite video signal input
or “Component 2” for component video signal input. Select PC for
PC signal input.

Change channels. Input remote codes. See page 51.

18

Lets you decide the input channel and select it. After pressing the

TUNE

remote 0 - 9 buttons, press TUNE.

RETURN

TV

Has three functions.

Return – Returns to the channel viewed

just before the channel
currently onscreen.

Return+ – Lets you program a specific

channel to return to while
scanning through the
channels using the – CH +

+

button as you memorize the
channel.

TV – Returns to the TV mode as you are

watching a video, DVD, etc.

TIMER

TV STB VCR DVD AUDIO

MODE

INPUT

V1 V2 V3 V4 V5

TV DVD/DVR DBB TUNER USB

123

456

789

TUNE

Note:

• Press TUNE and RETURN+ TV
buttons. This will memorize the
current channel to return to while you

– CH + – VOL +

iPod MUTING

scan through the other channels. To
cancel, press TUNE and RETURN+
TV buttons again.

U

N

E

M

OK

POWER

Basics

+

RETURN

TV

0

B

A

C

K

– CH +

– VOL +

iPod

MUTING

U

N

E

M

OK

B

A

C

K

Move sequentially through the channels.

Raise or lower the volume.

Control your iPod connected to the TV.
See page 46.

Turns the TV volume to 0. Press again
to restore the volume.

Used to access the TV’s onscreen
menus. See page 24.

Used to navigate through the TV’s
onscreen menus.

Go back to a previous onscreen menu or
to correct a mistake.

RM-C1485

TV

19

Remote Control

Allows you to save channels you like so you can view them easily. First you
must register the channels you like.

F

A

V

O

R

I

T

E

Notes:

• Go to the channel you want to register and press the FAVORITE. A list will
appear. Press the FAVORITE button again to register your channel.

• To view your favorite channels, press FAVORITE. Move to select your
channel and press OK.

• To erase your favorite channels, press FAVORITE. Move to select your
channel and press

• Both analog and digital channels can be registered.

• The channels you registered will appear in numerical order at the top of the
list.

Allows you to adjust the way the image appears on your TV based on the format
that is being received.

T

C

E

P

S

A

Full / Regular / Slim / Panorama / Cinema / Full Native

See page 30.

Favorite

1

2

4

5

6

7

9

11

13

FAVORITE

¥ 

:Remove:Add

.

20

SOUND

VIDEO

GUIDE

You can choose several types of sound modes.

Speech / Jazz / Classic / Rock / User

See page 39.

Allows you to choose different picture settings according to personal
preferences. You can access this feature for each input (TV, V1, V2, V3, V4,
V5).

Standard / Dynamic / Theater / Game

See page 26.

You can view program information for Digital Channels.

Note:

• The GUIDE will not show the correct time and date depending on the Time
Zone and D.S.T. settings. See page 41.

SUB CH

TV/VCR

ML/MTS

SUB T.

DISPLAY

Digital broadcast sometimes offers sub channels.
By using the SUB CH button, you can select a
sub channel easily.

For example, to move to sub channel 123-45:

1) Press 1, 2 and 3 in order

2) Press the SUB CH button

3) Press 4 and 5 in order

4) Press the TUNE button

Allows you to listen to a program in Stereo,
Mono sound or another language (Sap) if
available. First you must set the MODE to TV on
your remote.

Notes:

• When you are receiving a digital broadcast, if
there are other languages, you can change the
language by pressing the ML/MTS button.

• Keep the TV in stereo mode to get the best
sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono
sound only.

• Choose the mono setting to reduce excessive
noise on a certain channel or broadcast.

• MTS is unavailable if your television’s Input
source is (V1, V2, V3, V4, V5).

• ML/MTS will not work when you are using
HDMI.

View current channel information.

F

A

V

O

R

I

T

E

DVR

STATUS

VIDEO

SOUND

SUB CH ML/MTS DISPLAY

SUB T.

TV/VCR

T

C

E

P

S

A

PCON

GUIDE

Basics

* See page 52 for buttons that control your external devices.

RM-C1485

TV

21