JVC 0508TSH-II-IM, LCT2403-001A-A User Manual

LCD Television Users Guide

LT-42X899
LT-47X899

1080p HDTV

MODE

V1 V2 V3 V4 V5

TV STB VCR DVD AUDIO

INPUT

123

456

789

TUNE

0

– CH + – VOL +

LIGHT MUTING

U

N

OK

E

M

F

A

V

O

R

I

T

E

A

DVR

STATUS

VIDEO

SOUND

SUB CH C.C. DISPLAY

SUB T.

TV/VCR

TWIN SLEEP ML/MTS

SWAP

SELECT

RM-C1430

TV

POWER

+

RETURN

TV

B

A

C

K

T

C

E

P

S

GUIDE

Important Note:

In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this
guide. Keep this user’s guide in a convenient place for future reference. Keep the carton
and original packaging for future use.

Serial Number:

Model Number:

LCT2403-001A-A

0508TSH-II-IM

Table of Contents

Warnings . . . . . . . . . . . . . . . . . . 3

Precautions . . . . . . . . . . . . . . . . 7

Remote Control . . . . . . . . . . . . . 10

TV Basic Controls . . . . . . . . . . . 12

Key Features . . . . . . . . . . . . . . . 17

Setup . . . . . . . . . . . . . . . . . . . 18

Interactive Plug-In Menu . . . . . . . . . . 18

Remote Control Functions . . . . . 20

Return+ TV . . . . . . . . . . . . . . . . 20

Favorite . . . . . . . . . . . . . . . . . . . 20

Aspect . . . . . . . . . . . . . . . . 20

Sound . . . . . . . . . . . . . . . . 21

Video . . . . . . . . . . . . . . . . 21

Guide . . . . . . . . . . . . . . . . 21

SUB CH . . . . . . . . . . . . . . . . 21

C.C. . . . . . . . . . . . . . . . . . . . 22

TWIN . . . . . . . . . . . . . . . . . . . 22

Sleep . . . . . . . . . . . . . . . . . . . 23

ML/MTS . . . . . . . . . . . . . . . . 23

SWAP . . . . . . . . . . . . . . . . . . . 23

SELECT . . . . . . . . . . . . . . . . . . . 23

Customizing your TV . . . . . . 24

Initial Setup . . . . . . . . . . . . . . 25

Language . . . . . . . . . . . . . . . . 25

Tuner Setup . . . . . . . . . . . . . . . . 25

Set Clock . . . . . . . . . . . . . . . . 26

Set Lock Code . . . . . . . . . . . . . . . . 27

Interactive Plug-in Menu . . . . . . . . . . . 27

Software Version . . . . . . . . . . . . . . . . 27

Auto Demo . . . . . . . . . . . . . . . . . 27

V-Chip . . . . . . . . . . . . . . . . 28

V-Chip . . . . . . . . . . . . . . . . . . 29

Set US TV Ratings . . . . . . . . . . . . . . 29

Set Movie Ratings . . . . . . . . . . . . . . 30

Set Canadian Ratings English . . . . . . . 31

Set Canadian Ratings French . . . . . . . 31

Unrated . . . . . . . . . . . . . . . . . 31

Closed Caption . . . . . . . . . . 32

Closed Caption . . . . . . . . . . 32

Reset . . . . . . . . . . . . . . . . . 32

On/Off Timer . . . . . . . . . . . . . 33

Mode . . . . . . . . . . . . . . . . 33

On Time . . . . . . . . . . . . . . . . . . . 33

Off Time . . . . . . . . . . . . . . . . 33

Channel . . . . . . . . . . . . . . . . 33

On Volume . . . . . . . . . . . . . . . . 33

Picture Adjust . . . . . . . . . . . 34

Video Status . . . . . . . . . . . . . . . . 34

Natural Cinema . . . . . . . . . . . . 35

Theater Pro II . . . . . . . . . . . . . . . . 35

x.v.Color . . . . . . . . . . . . . . . . 35

Color Temp . . . . . . . . . . . . . . . . 35

Color Management . . . . . . . . . . . 36

Dynamic Gamma . . . . . . . . . . . . 36

Smart Picture . . . . . . . . . . . . . . . 36

Digital VNR . . . . . . . . . . . . . . . 36

MPEG NR . . . . . . . . . . . . . . . 36

Smart Sensor . . . . . . . . . . . . 36

Reset . . . . . . . . . . . . . . . . . 36

Sound Adjust . . . . . . . . . . . . 37

Balance . . . . . . . . . . . . . . . . 37

Turn On Volume . . . . . . . . . . . . . . 37

Volume Limit . . . . . . . . . . . . . . . . 37

Optical Out . . . . . . . . . . . . . . . . 38

Reset . . . . . . . . . . . . . . . . 38

Features . . . . . . . . . . . 39

Video-5 Input . . . . . . . . . . . . . . . 39

Noise Muting . . . . . . . . . . . . . 39

Front Panel Lock . . . . . . . . . . . . . 39

Auto Shut Off . . . . . . . . . . . . . . . 39

Quick Start-up . . . . . . . . . . . . . . . 39

Aspect . . . . . . . . . . . . . . . . . . . 40

Position Adjustment . . . . . . . . . . . . 41

Illumination . . . . . . . . . . . . 41

Power indicator . . . . . . . . . . . . 41

HDMI Size . . . . . . . . . . . . . . . . 41

Control with HDMI . . . . . . . . . . . 42

Video-1 Audio . . . . . . . . . . . . 42

Video Input Label . . . . . . . . . . . 42

Key Items . . . . . . . . . . . 43

Favorite . . . . . . . . . . . . . . . 43

Guide . . . . . . . . . . . . . . . . 43

Display . . . . . . . . . . . . . . . 43

Sleep Timer . . . . . . . . . . . . . . . 43

Multi Language/MTS . . . . . . . . . . . . 44

Photo Viewer . . . . . . . . . . . 45

Connecting Your Devices . . . . . 48

Programming Your Remote . . . . 55

Troubleshooting . . . . . . . . . . 62

Specifi cations . . . . . . . . . . . . 64

Warranty . . . . . . . . . . . . 65

Notes . . . . . . . . . . . . . . . . . . 67

2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Warnings

CAUTION: To reduce the risk of electric shock. Do not

remove cover (or back). No user serviceable
parts inside. Refer servicing to qualified service
personnel.

The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES

REGARDING THE USE OF THIS UNIT.

1. Operate only from the power source specified on the unit.

2. Avoid damaging the AC plug and power cord.

3. Avoid improper installation and never position the unit where good ventilation is unattainable.

4. Do not allow objects or liquid into the cabinet openings.

5. In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair
it yourself or remove the rear cover.

Changes or modifications not approved by JVC could void the warranty.

* When you don’t use this TV set for a long period of time, be sure to disconnect both the

power plug from the AC outlet and antenna for your safety.

* To prevent electric shock do not use this polarized plug with an extension cord, receptacle or

other outlet unless the blades can be fully inserted to prevent blade exposure.

• As an “ENERGY STAR®” partner,
JVC has determined that this
product or product model meets the
“ENERGY STAR
efficiency.

®

” guidelines for energy

3

Warnings

IMPORTANT RECYCLING INFORMATION

This product has a fluorescent lamp that contains mercury. Disposal

of these materials may be regulated in your community due to

environmental considerations. For disposal or recycling information,

please contact your local authorities or for USA, the Electronic Industries

Alliance: http://www.eiae.org

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's

instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.

15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,

such as vases, shall be placed on the apparatus.

4

Warnings

16) Place the television on a stable, flat surface. Failure to do so can result in the television
falling, causing injury.

17) DO NOT allow young children to play around or on the television. Do not hang from the
TV. Failure to do so can result in the television falling, causing injury.

18) DO NOT allow young children to play with the plastic bag that came with the television
when you unpacked it. Failure to do so can result in suffocation, causing injury.

19) Avoid improper installation and never position the unit where good ventilation is impossible.
When installing this TV, distance recommendations must be maintained between the set
and the wall, as well as inside a tightly enclosed area or piece of furniture. Keep to the
minimum distance guidelines shown for safe operation.

150 mm

5 7/8 in

200 mm

7 7/8 in

150 mm

5 7/8 in

200 mm

7 7/8 in

50 mm

2 in

20) Cautions for installation

— Do not tilt the TV towards the left or right, or towards the back.

— Install the TV in a corner on the floor so as to keep cords out of the way.
— The TV will generate a slight amount of heat during operation. Ensure that

sufficient space is available around the TV to allow satisfactory cooling.

— Have two people remove the TV from the box with the screen facing away

from you. It's possible your clothing, (such as a belt buckle or button) may
scratch the front of the TV. Do the same when moving the TV to another
location.

21) When attaching to a wall, use the optional JVC wall mounting unit.

For LT-42X899: JVC-XUF-2637 LCD FLAT WALL MOUNT
For LT-47X899: JVCPCM-MS2 TILT/FLAT WALL MOUNT
Caution
— Consult qualified installers.
— See the included manual on mounting procedures.
— JVC is not responsible for damages or injuries due to improper mounting.
— Use with other wall mounting unit is capable of resulting in instability or causing possible

injury.

22) Make enough room for inserting and removing the power plug. Place the TV as close
to the outlet as possible. The main power supply for this TV is controlled by inserting or
removing the power plug.

23) Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

24) When this TV is connected to the wall outlet, it is always on standby even when all the LED

lamps are not lit. To shut down the TV, unplug the TV from the wall outlet.

5

Warnings

FCC Notice:

Caution: Changes or modifi cations not expressly approved by party responsible for

compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV technician for help.

We have an important note for customers who subscribe to basic cable services (do not have
a separate cable box) and plan to use their JVC TV remote control to select channels.

Once you run the Auto Tuner Setup (which detects and programs all the channels your TV is
receiving through the RF input), every channel number available from your cable company
will appear in your television’s Channel Summary and they will all be marked as available for
scanning. Even though every channel is detected and appears as available, you will only be
able to view those that you specifi cally subscribe to from your cable company. This will likely
mean there are blank channels between those channels you wish to scan or “surf”.

We apologize for any inconvenience this may cause but it is important to note that this is
not a malfunction of your television. If you want to sequentially scan those channels you
subscribe to without blank ones in between, you can contact your cable company for their
cable box and remote, or manually deselect them using the edit / skip feature on page 25.

6

Precautions

Avoiding Temporary Burn-in

Displaying fi xed images for extended periods of time can leave a subtle but temporary burn-in
image on your screen. To avoid this, mix your viewing pattern.

Examples include, but are not limited to the following:

• Stock-market report bars

• Shopping channel logos and pricing

displays

• Video game patterns or scoreboards

• Bright station logos

• Internet web sites or other computer-style

images

• DVD discs, video tapes, laser discs

• Broadcast, cable, satellite channels or

digital television tuners/converters

TV on

Caring for the Cabinet

Normally, light dusting with a soft, non-scratching duster will keep your TV clean.

If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly
moistened with water. You can add a few drops of mild liquid detergent to the water to help
remove spots of oily dirt.

• DO NOT allow liquid to enter the TV through the ventilation slots.

• DO NOT use strong or abrasive cleaners on the TV.

• DO NOT spray liquids or cleaners directly on the TV’s surface.

• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.

For example...

TV off

XYZ XYZ

Caring for the Screen

The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.

Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.
These will remove the coating layer and cause discolorations.

Do not push or hit the screen. This could cause scratches on the screen surface and image
distortions.

7

Precautions

Tidying the cables

A cable holder which keeps your connection cables
tidy is attached to the back of the stand.

Install your TV

To prevent the TV from falling, thread the belt
through the hole on the back of the standand
secure it to the TV rack.

Disconnecting the stand

1) Place the TV face down on a soft cloth on a table.

2) Remove the five screws from the back of the TV.

3) Pull out the stand from the TV.

Hole

Belt and screw (not included)

Note:

• To re-install the stand, reverse the procedure from 3) to 1).

8

Package Contents

Make sure you have the following.

Precautions

Television x 1

Remote Control x 1

TV STB VCR DVD AUDIO

MODE

INPUT

V1 V2 V3 V4 V5

123

456

789

RETURN

TUNE

0

– CH + – VOL +

LIGHT MUTING

U

N

OK

E

M

F

A

V

O

R

P

I

T

S

E

A

DVR

STATUS

VIDEO

SOUND

SUB CH C.C. DISPLAY

SUB T.

TV/VCR

TWIN SLEEP ML/MTS

SWAP

SELECT

RM-C1430

TV

How to clean the frame and stand

Your TV has a glossy frame and stand which
have protection sheets attached to them. Peel
them off before use, but only after the TV has
been properly placed. Take care with handling
the glossy frame and stand because these
surfaces are delicate. If the glossy frame or
stand becomes dirty, first dust it off, then wipe it
softly with a cleaning cloth. If you wipe without
dusting off, you may damage it.

Insert the batteries

Use two “AA” batteries (included).

Place the "–" end in the unit first, making sure the "+" and
"–" markings are correct. Place the "–" end in the unit
first.

AA Batteries x 2

+

POWER

+

TV

B

A

C

K

T

C

E

GUIDE

AA Alkaline

–

+

AA Alkaline

–

Frame

Stand

If this symbol is shown, it is only valid
in the European Union

9

Remote Control

30

R

S

US

V

O

GUIDE

S

SUB CHC.C.

DIS

SOUND

F

A

V

O

R

I

T

E

S

S

P

ML/MTS

S

CT

The following pages gives you a brief description of each button’s function. For more detailed
information on the remote control buttons, see pages 20 - 23. This remote can also control up
to four other devices. See page 55 - 61.

POWER

TV STB VCR DVD AUDIO

MODE

INPUT

V1 V2 V3 V4 V5

123

456

789

TUNE

0

Lets you decide the input channel and select

TUNE

RETURN

TV

+

it. After pressing the remote 0 - 9 buttons,

Lets you go back to the previously selected

– CH +

– VOL +

LIGHT

MUTING

U

N

E

M

All remote control buttons are illuminated,

Turns the TV volume to 0. Press again to

Used to access the TV’s onscreen menus.

Turns the TV on or off.

Switch between “TV / STB /

VCR / DVD / AUDIO devices.

See page 55.

Switch between devices

connected to Video-1, 2, 3,

4 and 5.

Change channels. Input

remote codes. See page 55.

+

RETURN

TV

press TUNE.

channel. See page 20.

Move sequentially through the channels.

Raise or lower the volume.

except for the LIGHT button.

restore the volume.

See page 24.

POWER

TV STB VCR DVD AUDIO

MODE

INPUT

V1 V2 V3 V4 V5

123

456

789

TUNE

RETURN

TV

0

– CH + – VOL +

LIGHT MUTING

U

N

OK

E

M

F

A

V

O

R

I

T

E

DVR

DV

STATUS

TAT

VIDEO

SOUND

SUB CH C.C. DISPLAY

SUB T.

TV/VCR

TV/VCR

TWIN SLEEP ML/MTS

SWAP

SELECT

WAP

RM-C1430

RM-C14

ELE

IDE

UB T.

LEE

T

C

E

P

S

A

GUIDE

PLAY

TV

+

B

A

C

K

OK

B

A

C

K

Used to navigate through the TV’s

onscreen menus.

Go back to a previous onscreen menu or to

correct a mistake.

10

STAT

Remote Control

R

A

T

4

TU

T

T

–

M

B

A

C

K

V3

V5

30

F

A

V

O

R

I

T

E

Save your favorite channels. See page 20.

S

A

SOUND

VIDEO

GUIDE

SUB CH

TV/VCR

C.C.

SUB T.

DISPLAY

TWIN

SLEEP

T

C

E

P

Change the aspect ratio of the image on your

TV screen. See page 20.

Change the sound mode of the MaxxAudio

function. See page 21.

TV STB VCR DVD AUDIO

MODE

DE

INPUT

INPU

TBVC

POWER

POWER

UDIO

V1 V2 V3 V4 V5

Choose different display settings according to

personal preferences. See page 21.

Programming information. (Digital channels

only). See page 21.

Used to select sub channels.

(Digital channels only). See page 21.

Use the C.C. (Closed Caption) button to

select the mode of closed caption. See page

22.

View current channel information.

Activate the split screen option.

Choose how long the TV will stay on before

turning off. See page 23.

123

456

789

TUNE

NE

– CH + – VOL +

CH + – VOL +

LIGHT MUTING

LIGH

U

N

E

M

F

A

V

O

R

I

DVR

STATUS

SOUND

SUB CH C.C. DISPLAY

TV/VCR

TWIN SLEEP ML/MTS

SWAP

T

E

SELECT

0

0

OK

OK

VIDEO

SUB T.

S

A

RETURN

TV

UTING

T

C

E

P

GUIDE

V

+

B

A

C

K

ML/MTS

Listen to a program in stereo, mono or

another language (SAP). (Depending on

availability in the program). See page 23.

SWAP

Exchange the channel (or input) displayed in

the split screen window for the main screen

image.

SELECT

Select the picture (channel) while viewing split

screen.

* See page 56 for buttons that control your external devices.

RM-C1430

RM-C14

TV

11

TV Basic Controls

Before you connect your television to another device, please refer to the proper diagrams for
your specific TV and remote. These will help assist you in understanding how to connect your
television to another device, as well as use the remote to set up your television. Some of the
connection terminals are color coded for easy connection with the proper cables.

Front Panel

Illumination

POWER LED

Side Panel

INPUT MENU C H VOL

OK BACK

POWER

Rear Panel

• For governing the use of

the IR IN terminal, consult
your dealer.

12

Input

Change the input

MENU

Used to access the TV’s onscreen menus.

+CH–

Move sequentially through the channels.

+VOL–

Raises or lowers the volume.

POWER

Turn the TV on or off.

Antenna / Cable

IR IN

75 Ω

(VHF/UHF)

F

VIDEO

R – AUDIO – L

Y

P

R PR

VIDEO

R – AUDIO – L

Y

P

R PR

VIDEO

R – AUDIO – L

S-VIDEO

R – AUDIO – L

R – AUDIO – L

RS-232CINPUT 5INPUT 4INPUT 3FOR HDMI 1AUDIO OUT

INPUT 5 INPUT 2 INPUT 1

DIGITAL AUDIO
OPTICAL OUT

PC IN

(D-SUB)

PHOTO
VIEWER

TV Basic Controls

I

Digital Camera

A

J

A, BA

Audio System

RS-232CINPUT 5INPUT 4INPUT 3FOR HDMI 1AUDIO OUT

VIDEO

R – AUDIO – L

Y

P

R PR

VIDEO

R – AUDIO – L

Y

P

R PR

VIDEO

S-VIDEO

R – AUDIO – L

R – AUDIO – L

R – AUDIO – L

DIGITAL AUDIO

PHOTO

OPTICAL OUT

VIEWER

INPUT 5 INPUT 2 INPUT 1

PC IN
(D-SUB)

G

PC

DVD Player

• For more detailed information, see
pages 48 - 54.

• For governing the usage of the
RS-232C terminal, consult your
dealer.

STB (Digital Cable,

E

satellite) Tuner Box

* This is used when you are using

A, B, C, D, E, F, G, H, I, J: Types of connections.

C, E

Video Camera

C, D, E

a DVI device.

Game Console

H

Audio System

13

TV Basic Controls

Device Side With Cables TV Side

A

HDMI HDMI Cable INPUT 1, 2 or 5

B

Good Best

C

VIDEO and AUDIO

D

E

F

G

AUDIO

DVI + Audio

Component

Video + Audio

S-Video + Audio

Composite

Video + Audio

Antenna / Cable

(VHF / UHF) RF Cable

OPTICAL INPUT

DVI – HDMI Cable,

Audio Cable

Component

Video + Audio INPUT 3 or 4

S-Video Cable,

Audio Cable

Composite

Video + Audio INPUT 3, 4 or 5

OPTICAL AUDIO

Cable

INPUT 1 +

HDMI ANALOG AUDIO

INPUT 3 +

AUDIO Input

75Ω

(VHF / UHF)

DIGITAL AUDIO

OPTICAL OUT

H

Good Best

14

AUDIO INPUT

(L / R) Audio Cable

AUDIO OUT

(L / R)

Compatible Signal Notes

Input

• HDMI (Digital)
SD: 480i, 480p
HD: 1080/60p / 1080/30p / 1080/24p / 1080i / 720p
Audio L/R (Digital)

Input

• DVI (Digital)
SD: 480i, 480p
HD: 1080/60p / 1080i / 720p

• Audio L/R (Analog)

Input

• Component (Analog)
SD: 480i, 480p
HD: 1080i, 720p

• Audio L/R (Analog)

Input

• S-Video (Analog)

• Audio L/R (Analog)

TV Basic Controls

See page 52.

See page 51.

See page 49.

Input

• Composite (Analog)

• Audio L/R (Analog)

ATSC (Digital)
NTSC (Analog)
Clear QAM (Digital)

Output

• Audio L/R (Digital)
(PCM or Dolby Digital)

Output

• Audio L/R (Analog)
(Fixed)

See page 49.

See page 48.

See page 50.

See page 50.

15

TV Basic Controls

PC

Device Side With Cables TV Side

I

PC IN

(D-SUB)

(3.5 mm stereo mini jack)

USB

Device Side With Cables TV Side

J

D-SUB

+ Audio

USB

D-sub (15 pin) Cable

+ Audio Cable

USB Cable

PC IN (D-SUB)

+ INPUT 5 AUDIO Input

PHOTO
VIEWER

16

Key Features

Your JVC TV is equipped with many features. Here are some key features
highlighted in detail.

1 Stunning picture quality via 1920x1080 Full HD panel.

Dynamic Gamma and Color Management give further
fi ne tuned picture reproduction. Smart Picture adjusts the
best possible picture quality automatically scene by scene
based on the incoming signal from any source!

2 “120Hz Clear Motion Drive III technology displays

120 frames per second (120Hz) in the same time a
conventional LCD TV displayes 60 frames (60Hz). You
will be able to reduce blurring or image trails when there is
rapid or complex movement across the screen.

OffOn

i-clear Motion NR – Provides 3D noise reduction for moving images by applying the

Real 12bit Driver – JVC’s new bit extention technology takes 8-bit images and turns them into

high-precision motion prediction techniques.

images with 12-bit precision. It produces smooth, natural signal gradations
without sacrafi cing the original HD signal.

3 JVC exclusive twin oblique cone speakers provide excellent TV sound quality. MaxxAudio

sound provides you with 4 different settings based on the program you are watching. The
equalizer will fi ne tune your listening preferences.

4 Full connectivity with 3 HDMI, 2 Component, 1 S-video and others. The variety of

connections are explained on pages 47 to 51.

x 3 x 2

HDMI CEC (see page 42)

x 1

5 Aspect mode will show every pixel you are getting in High Defi nition. The Native mode will

show 100% of 1080p. Full – with slight overscan. Panorama and Cinema will fi ll the screen
with various aspect settings. See page 40.

6 Photo Viewer allows you to enjoy your digital pictures stored on your USB Mass Storage

Class devices. See page 45.

17

Setup

TV

CR

A

O

UT

4

TUNE

T

T

G

–

30

US

V

R

M

A

V

O

T

A

B

A

C

K

1

V2

V5

P

S

CT

Interactive Plug-In Menu

When you turn on your TV for the first time, the Interactive Plug-In Menu appears automatically.
These menus will help you setup your TV with basic information for Language, Time and

Tuner Setup.

POWER

TV STB VCR DVD AUDIO

MODE

V1 V2 V3 V4 V5

V

TB V

DE

INPUT

INP

V3V4

123

456

789

TUNE

– CH + – VOL +

CH + – VOL +

LIGHT MUTING

LIGH

U

N

E

M

F

A

V

O

R

I

DVR

STATUS

TAT

SOUND

UND

SUB CH C.C. DISPLAY

UB CH C.C.DISPLAY

TV/VCR

TV/VC

TWIN SLEEP ML/MTS

SWAP

WA

0

OK

T

E

VIDEO

IDEO

UB T.

SUB T.

LEEPML/MT

SELECT

ELE

RM-C1430

RM-C14

A

RETURN

P

S

GUIDE

TV

V

TIN

T

C

E

UIDE

TV

UDI

+

B

A

C

K

1) Turn on the TV

2) Set the language

Interactive Plug-In Menu

> Language/Langue/Idioma

Language/Langue/Idioma

Select

Set

Operate Exit

English

MENU

3) Set time attribute

Interactive Plug-In Menu

> Set Clock

Mode

Channel

Time

Time Zone

D.S.T

Select

Start Clock

Manual

– –

– – : – – – –

Pacific

Off

Operate Exit

Back

BACK

MENU

POWER

1 Select a language

OK

2 Select “Set”

OK

3 Move to next menu

1 Change settings

OK

2 Select an item
3 Select “Start

Clock”

OK

4 Move to next menu

Mode Auto (Analog), Auto (Digital), Manual

Channel Only can select when Mode is in Auto (Digital)

Time Only can select when Mode is in Manual

Time Zone Choose the time zone you live in.

D.S.T. Changes the clock automatically for daylight saving time. On / Off

18

Interactive Plug-In Menu (Continued)

G

– VO

30

R

US

O

E

R

.

CH.C.IS

D

M

A

V

O

T

B

A

C

K

S

CT

Setup

– CH + – VOL +

– CH +

LIGHT MUTING

LIGHT

U

N

E

M

F

A

V

O

R

I

T

E

DVR

V

STATUS

TAT

SOUND

N

SUB CH C.C. DISPLAY

B

TV/VCR

TV/VC

TWIN SLEEP ML/MTS

SWAP

SELECT

WAP

OK

VIDEO

VIDE

SUB T.

UB T

LEEP

ELE

RM-C1430

M-C14

UTIN

T

C

E

P

S

A

GUIDE

PLAY

L/MT

TV

L +

ID

4) Set TV attribute

Interactive Plug-In Menu

> Auto Tuner Setup

Tuner Mode

Scan Mode

B

A

C

K

Select

Start

Operate Exit

Cable

Auto

Back

MENU

BACK

Tuner Mode Choose Air (antenna), Cable or Skip

Scan Mode Auto, STD, HRC, IRC

* If you use a set top box (satellite or cable box), press “Exit” to

skip this step.

Cable Users: After your auto tuner setup is complete, you may,
(depending on the type of hookup), have only 1 channel, usually
2, 3 or 4 in the auto tuner memory. This is normal.

1 Change settings

OK

2 Select an item

3 Select “Start”

OK

4 Start scanning

channels

“Thank you! Setup is now complete”

19

Remote Control Functions

+

RETURN

TV

Has three functions.

Return – Returns to the channel viewed just before the channel currently onscreen.

Return+ – Lets you program a specific channel to return to while scanning through the

TV – Returns to the TV mode as you are watching a video, DVD, etc.

Note:

• Press the RETURN+ TV and hold for three seconds. This will memorize the current channel
to return to while you scan through the other channels. To cancel, press and hold the
RETURN+ TV button for three seconds.

F

A

V

O

R

Allows you to save channels you like so you can view them easily. First you must register the
channels you like.

Notes:

• Go to the channel you want to register and press the FAVORITE button for three seconds.

• To view your favorite channels, press FAVORITE. Move π† to select your channel and

press OK.

• To erase your favorite channels, press FAVORITE. Move π† to select your channel and

press ®.

• Both analog and digital channels can be registered.

• The newest channel you registered will appear at the top of the list.

RETURN+ TV

channels using the – CH + button as you memorize the channel.

FAVORITE

I

T

E

T

C

ASPECT

E

P

S

A

Allows you to adjust the way the image appears on your TV based on the format that is being
received.

Panorama / Cinema / Full / Panorama Zoom / Cinema Zoom / Full Native / Regular / Slim

See page 40.

Note:

• You can select the aspect mode by pressing the ASPECT button.

20

Remote Control Functions

U

DVR

STAT

SOUND

Change the sound mode of the MaxxAudio function. High / Mid / Low / Off

Notes:

• You can choose the different sound modes by pressing the SOUND button.

SOUND

ATUS

VIDEO

VIDEO

Allows you to choose different picture settings according to personal preferences. You can
access this feature for each input (TV, V1, V2, V3, V4, V5).

Standard / Dynamic / Theater / Game / Memory-1 / Memory-2

Note:

• You can select Video Status by pressing the VIDEO button. See page 34.

GUIDE

DISPLAY

GUIDE

You can view program information for Digital Channels.

Note:

• When the program information is not being broadcast, the correct information will not be
displayed.

• The GUIDE will not show the correct time and date depending on the Time Zone and D.S.T.

settings. See page 43.

SUB CH

TV/VCR

SUB CH

Digital broadcast sometimes offers sub channels. By using the SUB CH button, you can select
a sub channel easily.

For example, to move to sub channel 123-45:

1) Press 1, 2 and 3 in order

2) Press the SUB CH button

3) Press 4 and 5 in order

4) Press the TUNE button

21