42" class (42" Diagonal)
47" class (46.9" Diagonal)
SLEEP
TV STB VCR DVD AUDIO
MODE
INPUT
V1 V2 V3 V4 V5
TV DVD/DVR DBB TUNER USB
123
456
789
TUNE
0
– CH + – VOL +
iPodMUTING
U
N
OK
E
M
F
A
V
O
R
I
T
E
A
DVR
STATUS
VIDEO
SOUND
SUB CH ML/MTS DISPLAY
SUB T.
TV/VCR
iTV
RM-C1480
TV
POWER
+
RETURN
TV
B
A
C
K
T
C
E
P
S
PCON
GUIDE
iPod is a trademark of Apple Inc., registered in the
U.S. and other countries.
Important Note:
In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this
guide. Keep this user’s guide in a convenient place for future reference. Keep the carton
and original packaging for future use.
CAUTION: To reduce the risk of electric shock. Do not
remove cover (or back). No user serviceable
parts inside. Refer servicing to qualified service
personnel.
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES
REGARDING THE USE OF THIS UNIT.
1. Operate only from the power source specified on the unit.
2. Avoid damaging the AC plug and power cord.
3. Avoid improper installation and never position the unit where good ventilation is unattainable.
4. Do not allow objects or liquid into the cabinet openings.
5. In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair
it yourself or remove the rear cover.
Changes or modifications not approved by JVC could void the warranty.
* When you don’t use this TV set for a long period of time, be sure to disconnect both the
power plug from the AC outlet and antenna for your safety.
* To prevent electric shock do not use this polarized plug with an extension cord, receptacle or
other outlet unless the blades can be fully inserted to prevent blade exposure.
• As an “ENERGY STAR®” partner,
JVC has determined that this
product or product model meets the
“ENERGY STAR
efficiency.
®
” guidelines for energy
3
Warnings
IMPORTANT RECYCLING INFORMATION
This product has a fluorescent lamp that contains mercury. Disposal
of these materials may be regulated in your community due to
environmental considerations. For disposal or recycling information,
please contact your local authorities or for USA, the Electronic Industries
Alliance: http://www.eiae.org
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
4
Warnings
16) Place the television on a stable, flat surface. Failure to do so can result in the television
falling, causing injury.
17)DO NOT allow young children to play around or on the television. Do not hang from the
TV. Failure to do so can result in the television falling, causing injury.
18)DO NOT allow young children to play with the plastic bag that came with the television
when you unpacked it. Failure to do so can result in suffocation, causing injury.
19) Avoid improper installation and never position the unit where good ventilation is impossible.
When installing this TV, distance recommendations must be maintained between the set
and the wall, as well as inside a tightly enclosed area or piece of furniture. Keep to the
minimum distance guidelines shown for safe operation.
150 mm
5 7/8 in
200 mm
7 7/8 in
150 mm
5 7/8 in
200 mm
7 7/8 in
50 mm
2 in
20) Cautions for installation
— Do not tilt the TV towards the left or right, or towards the back.
— Install the TV in a corner on the floor so as to keep cords out of the way.
— The TV will generate a slight amount of heat during operation. Ensure that
sufficient space is available around the TV to allow satisfactory cooling.
— Have two people remove the TV from the box with the screen facing away
from you. It's possible your clothing, (such as a belt buckle or button) may
scratch the front of the TV. Do the same when moving the TV to another
location.
21) When attaching to a wall, use the optional JVC wall mounting unit.
For LT-42P789: JVC-XUF-2637 LCD FLAT WALL MOUNTFor LT-47P789: JVCPCM-MS2 TILT/FLAT WALL MOUNT
Caution
— Consult qualified installers.— See the included manual on mounting procedures.— JVC is not responsible for damages or injuries due to improper mounting.— Use with other wall mounting unit is capable of resulting in instability or causing possible
injury.
22) Make enough room for inserting and removing the power plug. Place the TV as close
to the outlet as possible. The main power supply for this TV is controlled by inserting or
removing the power plug.
23) Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
24) When this TV is connected to the wall outlet, it is always on standby even when all the LED
lamps are not lit. To shut down the TV, unplug the TV from the wall outlet.
5
Warnings
FCC Notice:
Caution: Changes or modifi cations not expressly approved by party responsible for
compliance could void the user's authority to operate the equipment.
We have an important note for customers who subscribe to basic cable services (do not have
a separate cable box) and plan to use their JVC TV remote control to select channels.
Once you run the Auto Tuner Setup (which detects and programs all the channels your TV is
receiving through the RF input), every channel number available from your cable company
will appear in your television’s Channel Summary and they will all be marked as available for
scanning. Even though every channel is detected and appears as available, you will only be
able to view those that you specifi cally subscribe to from your cable company. This will likely
mean there are blank channels between those channels you wish to scan or “surf”.
We apologize for any inconvenience this may cause but it is important to note that this is
not a malfunction of your television. If you want to sequentially scan those channels you
subscribe to without blank ones in between, you can contact your cable company for their
cable box and remote, or manually deselect them using the edit / skip feature on page 30.
Precautions
Avoiding Temporary Burn-in
Displaying fi xed images for extended periods of time can leave a subtle but temporary burn-in
image on your screen. To avoid this, mix your viewing pattern.
Examples include, but are not limited to the following:
• Stock-market report bars
• Shopping channel logos and pricing
displays
• Video game patterns or scoreboards
• Bright station logos
• Internet web sites or other computer-style
images
• DVD discs, video tapes, laser discs
• Broadcast, cable, satellite channels or
digital television tuners/converters
TV on
For example...
TV off
XYZXYZ
6
Precautions
Caring for the Cabinet
Normally, light dusting with a soft, non-scratching duster will keep your TV clean.
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly
moistened with water. You can add a few drops of mild liquid detergent to the water to help
remove spots of oily dirt.
• DO NOT allow liquid to enter the TV through the ventilation slots.
• DO NOT use strong or abrasive cleaners on the TV.
• DO NOT spray liquids or cleaners directly on the TV’s surface.
• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.
Caring for the Screen
The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.
Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.
These will remove the coating layer and cause discolorations.
Do not push or hit the screen. This could cause scratches on the screen surface and image
distortions.
Tidying the cables
A cable holder which keeps your connection cables tidy is attached to the back of the stand.
7
Precautions
Disconnecting the stand
If you disconnect the stand, attach the bottom cover and the screw (supplied) into the hole.
1) Place the TV face down on a soft cloth on a table.
2) Remove the six screws from the back of the TV.
3) Pull out the stand from the TV.
4) Cover the hole with the supplied bottom cover and tighten the screw.
Notes:
• To re-install the stand, reverse the procedure from 4) to 1).
• If you fi nd it diffi cult to remove the screws from inset screw wells, use a magnetized
screwdriver.
8
Package Contents
Make sure you have the following.
Precautions
Television x 1
Remote Control x 1
SLEEP
TV STB VCR DVD AUDIO
MODE
INPUT
V1 V2 V3 V4 V5
TV DVD/DVR DBB TUNER USB
123
456
789
RETURN
TUNE
0
– CH + – VOL +
iPodMUTING
U
N
OK
E
M
F
A
V
O
R
P
I
T
S
E
A
DVR
STATUS
VIDEO
SOUND
SUB CH ML/MTS DISPLAY
SUB T.
TV/VCR
iTV
RM-C1480
TV
Dock Adapter x 5
ABC
DE
Insert the batteries
Use two “AA” batteries (included).
Place the "–" end in the unit first, making sure the "+" and
"–" markings are correct. Place the "–" end in the unit
first.
AA Batteries x 2
+
POWER
+
TV
B
A
C
K
T
C
E
PCON
GUIDE
+
AA Alkaline
AA Alkaline
–
–
Screw x 1
Bottom Cover x 1
If this symbol is shown, it is only valid
in the European Union
9
TV DVD/DVR DBB TUNER USB
Remote Control
80
R
S
US
V
O
GUIDE
S
SUB C
S
DIS
SOUND
M
F
A
V
O
R
I
T
E
B
A
C
K
PCO
The following pages gives you a brief description of each button’s function. For more detailed
information on the remote control buttons, see pages 19 - 21. This remote can also control up
to four other devices. See page 52 - 58.
SLEEP
POWER
Choose how long the TV will stay on before
turning off. See page 19.
Turns the TV on or off.
TV STB VCR DVD AUDIO
MODE
Switch between “TV / STB /
VCR / DVD / AUDIO devices.
See page 52.
INPUT
V1 V2 V3 V4 V5
TV DVD/DVR DBB TUNER USB
Switch between devices
connected to Video-1, 2, 3,
4 and 5.
For V4 (Video-4) and V5 (Video-5) you must select the signal
input type fi rst (ie. composite, S-Video, or component). To do
so, you need to press the V4 or V5 button until the correct
type is highlighted. Select “Composite 1” for composite video
signal input, “S-Video” for S-video signal input, or “Component
1” for component video signal input. Select “Composite 2” for
composite video signal input or “Component 2” for component
video signal input.
123
456
789
TUNE
0
RETURN
TV
+
Change channels. Input
remote codes. See page 52.
Lets you decide the input channel and select
TUNE
it. After pressing the remote 0 - 9 buttons,
press TUNE.
+
RETURN
TV
Lets you go back to the previously selected
channel. See page 19.
POWER
SLEEP
TV STB VCR DVD AUDIO
MODE
INPUT
V1 V2 V3 V4 V5
TV DVD/DVR DBB TUNER USB
123
456
789
TUNE
RETURN
TV
0
– CH +– VOL +
iPodMUTING
U
N
OK
OK
E
M
F
A
V
O
R
I
T
E
DVR
DV
STATUS
TAT
VIDEO
SOUND
SUB CHML/MTSDISPLAY
H ML/MT
SUB T.
TV/VCR
TV/VCR
iTV
RM-C1480
RM-C14
IDE
UB T.
T
C
E
P
S
A
PCON
GUIDE
PLAY
TV
+
B
A
C
K
N
– CH +
– VOL +
iPod
MUTING
10
Move sequentially through the channels.
Raise or lower the volume.
Control your iPod connected to the TV.
See page 42.
Turns the TV volume to 0. Press again to
restore the volume.
STAT
Remote Control
R
A
T
4
TU
T
od
–
V3
V5
R
TUNER
80
U
N
E
M
B
A
C
K
F
A
V
S
A
SOUND
VIDEO
GUIDE
SUB CH
TV/VCR
ML/MTS
SUB T.
DISPLAY
Used to access the TV’s onscreen menus.
See page 22.
POWER
TBVC
POWER
UDIO
OK
Used to navigate through the TV’s
onscreen menus.
SLEEP
LEEP
TVSTBVCRDVDAUDIO
DE
MODE
INPUT
INPU
V1V2V3V4V5
Go back to a previous onscreen menu or to
correct a mistake.
VD/DV
123
B
TVDVD/DVRDBBTUNERUSB
456
O
R
I
T
E
T
C
E
P
Save your favorite channels. See page 19.
Change the aspect ratio of the image on your
TV screen. See page 20.
789
TUNE
NE
– CH +– VOL +
CH +– VOL +
iPodMUTING
P
RETURN
RETURN
TV
V
0
0
UTING
+
Choose several types of sound frequencies.
See page 20.
Choose different display settings according to
personal preferences. See page 20.
Programming information. (Digital channels
only). See page 21.
Used to select sub channels.
U
N
OK
E
M
F
A
V
O
R
I
T
E
DVR
STATUS
VIDEO
SOUND
SUB CH ML/MTS DISPLAY
SUB T.
TV/VCR
B
A
C
K
T
C
E
P
S
A
PCON
GUIDE
(Digital channels only). See page 21.
Listen to a program in stereo, mono or
iTV
another language (SAP). (Depending on
availability in the program). See page 21.
RM-C1480
View current channel information.
RM-C14
TV
* See page 52 for buttons that control your external devices.
11
TV Basic Controls
Before you connect your television to another device, please refer to the proper diagrams for
your specific TV and remote. These will help assist you in understanding how to connect your
television to another device, as well as use the remote to set up your television. Some of the
connection terminals are color coded for easy connection with the proper cables.
Front Panel
Illumination for iPod
TeleDock
Power Lamp
Remote Control Sensor
Notes:
• Do not use unreasonable force to the TeleDock.
• When not using the TeleDock, close the cover.
• Do not touch the connector pins of the TeleDock or the iPod terminal pins.
• Do not put different devices on the TeleDock. It may cause a connection failure.
Side Panel
12
INPUT
MENU
CHANNEL
VOLUME
BACK
POWER
PHOTO VIEWER
Input
Change the input
MENU
Used to access the TV’s onscreen menus.
+CH–
Move sequentially through the channels.
+VOL–
OK
Raises or lowers the volume.
POWER
Turn the TV on or off.
Photo Viewer Connector
• Do not use Photo Viewer connector to
connect the iPod
When you turn on your TV for the first time, the Initial Setup menu appears automatically.
These menus will help you setup your TV with basic information for Language, Time and
Tuner Setup. You can also set this setting in the “Plug in Menu”.
POWER
SLEEP
LEEP
TVSTBVCRDVDAUDIO
TB V
DE
MODE
INPUT
INP
V1V2V3V4V5
V
TVDVD/DVRDBBTUNERUSB
TV DVD/DVRBB TUNERB
V
123
456
789
7
TUNE
– CH +– VOL +
CH +– VOL +
iPodMUTING
o
U
N
E
M
F
A
V
O
R
I
T
DVR
STATUS
TAT
SOUND
OUND
SUB CHML/MTSDISPLAY
UB CH ML/MTS DISPLAY
TV/VCR
TV/V
iTV
iT
0
OK
E
VIDEO
IDEO
SUB T.
RM-C1480
RM-C14
TV
RETURN
TV
TIN
T
C
E
P
S
A
PCON
CON
GUIDE
UIDE
B T.
V
1) Turn on the TV
POWER
UDI
2) Set the language
Set Language/Langue/Idioma
English
+
V
B
A
C
K
Next
1 Select a language
OK
2 Select “Next”
OK
3 Move to next menu
3) Set time attribute
Set Time Attribute
Time Zone
D.S.T.
Atlantic
ON
Next
1 Change settings
OK
2 Select an item
3 Select “Next”
OK
4 Move to next menu
Time ZoneChoose the time zone you live in.
D.S.T.Changes the clock automatically for daylight
saving time. On / Off
16
Initial setup (Continued)
od
G
– VO
80
R
US
O
E
R
.
D
M
A
V
O
T
B
A
C
K
Setup
– CH +– VOL +
– CH +
iPodMUTING
P
U
N
E
M
F
A
V
O
R
I
T
E
DVR
V
STATUS
TAT
VIDEO
VIDE
SOUND
N
SUB CHML/MTSDISPLAY
B CHL/MTSISPLAY
SUB T.
TV/VCR
TV/VC
iTV
RM-C1480
OK
UB T
M-C14
L +
UTIN
T
C
E
P
S
A
PCON
GUIDE
ID
TV
4) Set TV attribute
Set TV Attribute
B
A
C
K
Tuner ModeAir
Start ScanExit
Tuner ModeChoose Air (antenna) or Cable
* If you use a set top box (satellite or cable box), press “Exit” to
skip this step.
Cable Users: After your auto tuner setup is complete, you may,
(depending on the type of hookup), have only 1 channel, usually
2, 3 or 4 in the auto tuner memory. This is normal.
1 Change settings
OK
2 Select an item
3 Select “Start Scan”
OK
4 Start scanning
channels
“Thank you! Setup is now complete”
Note:
• If you want to turn off the Auto Demo, press the MENU button.
17
Key Features
Your JVC TV is equipped with many features. Here is some key features
highlighted in detail.
1Simple playback of video and music on
TV. You can charge your iPod. You
can watch a program while listening
to the iPod (source of program must
be from TV’s Internal Tuner). You
can view photos from the iPod while
listening to the iPod.
2Stunning picture quality via 1920x1080 Full HD panel.
Dynamic Gamma and Color Management give further
fi ne tuned picture reproduction. Smart Picture adjusts the
best possible picture quality automatically scene by scene
based on the incoming signal from any source!
3JVC exclusive oblique cone speakers provide excellent
TV sound quality. OmniSurround sound provides you 4
different settings based on the program you are watching.
The equalizer will fi ne tune your listening preferences.
Dock adapter (supplied)
TeleDock
4Full connectivity with 3 HDMI, 2 Component, 1 S-video and others. The variety of
connections are explained in pages. 47 to 51.
x 3x 2
5Aspect mode will show every pixel you are getting in High Defi nition. The Native mode will
show 100% of 1080p. Full – with slight overscan. Panarama, Cinema will fi ll the screen
with various aspect settings. Mini Mode will show a better picture with a smaller screen for
low resolution content from your iPod.
Or...
Full or Widescreen Mode – For high
quality iPod sources.
18
Mini Mode – For low quality iPod
sources.
x 1
Remote Control Functions
SLEEP
Sleep
Allows you to choose how long the TV will stay on before turning off.
Notes:
• When you press the SLEEP button several times, you can set the interval at Off, 15, 30, 45,
60, 90, 120, 150 and 180 minutes.
• 60 seconds before the TV turns off, a message will appear and it will count the remaining
time. If you want to extend the time, press the SLEEP button and you can change the
interval. If you don’t press the SLEEP button, within 60 seconds the TV will turn off.
+
RETURN
TV
Return+ TV
Has three functions.
Return – Returns to the channel viewed just before the channel currently onscreen.
Return+ – Lets you program a specific channel to return to while scanning through the
channels using the – CH + button as you memorize the channel.
TV – Returns to the TV mode as you are watching a video, DVD, etc.
Note:
• Press TUNE and RETURN+ TV buttons. This will memorize the current channel to return
to while you scan through the other channels. To cancel, press TUNE and RETURN+ TV
buttons again.
F
A
V
O
R
I
T
E
Favorite
Allows you to save channels you like so you can view them easily. First you must register the
channels you like.
Notes:
• Go to the channel you want to register and press the FAVORITE. A list will appear. Press
the FAVORITE button again to register your channel.
• To view your favorite channels, press FAVORITE. Move to select your channel and
press OK.
• To erase your favorite channels, press FAVORITE. Move to select your channel and
press .
• Both analog and digital channels can be registered.
• The channels you registered will appear in numerical order at the top of the list.
19
Remote Control Functions
STAT
T
C
Aspect
E
P
S
A
Allows you to adjust the way the image appears on your TV based on the format that is being
received.
Panorama / Cinema / Full / Panorama Zoom / Cinema Zoom / Full Native / Regular / Slim
See page 28.
Notes:
• You can select the aspect mode by pressing the ASPECT button.
• You can also access the aspect modes using the buttons on the side of the TV, by using the
MENU button, then the – CH + button.
SOUND
Sound
You can choose several types of sound modes. Speech / Jazz / Classic / Rock / User
Notes:
• You can choose the different sound modes by pressing the SOUND button.
• If you select User, you can customize the various sound frequencies.
VIDEO
Video
Allows you to choose different picture settings according to personal preferences. You can
access this feature for each input (TV, V1, V2, V3, V4, V5).
Standard / Dynamic / Theater / Game
See page 23.
20
Loading...
+ 44 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.