JVC LCT1885-001A-A, AV-56P786, AV-48P786, 0705JGI-II-IM User Manual

Download

Projection Television Users Guide

For Models:

AV-48P776 AV-56P776 AV-48P786 AV-56P786

POWER

DVD

CATVVCR

INPUT

SLEEP

DISPLAY C.C. D/A

TIMER

THEATER PRO

VIDEO STATUS

ASPECT

RETURN+

TUNE

SUB CH

/TV

ML/MTS SOUND GUIDE

FAVORITE

MUTING

CH +

VOL

–

CH –

BACK

VCR/DVD

VCR CHANNEL

TV/VCR

POWER

PREV NEXT

PLAY FFREW

REC

STOP PAUSE

OPEN/CLOSE

STILL/PAUSE

RM-C1270G

Illustration of AV-56P776 and RM-C1270G

Important Note:

In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user’s guide in a convenient place for future reference. Keep the carton and original packaging for future use.

Model Number:

Serial Number:

LCT1885-001A-A

0705JGI-II-IM

Important Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: To reduce the risk of electric shock. Do not

remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS TV

SET TO RAIN OR MOISTURE.

CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES

REGARDING THE USE OF THIS UNIT.

1. Operate only from the power source specified on the unit.

2. Avoid damaging the AC plug and power cord.

3. Avoid Improper installation and never position the unit where good

4. Do not allow objects or liquid into the cabinet openings.

5. In the event of trouble, unplug the unit and call a service technician. Do

Changes or modifications not approved by JVC could void the warranty.

* When you don’t use this TV set for a long period of time, be sure to

* To prevent electric shock do not use this polarized plug with an

ventilation is unattainable.

not attempt to repair it yourself or remove the rear cover.

disconnect both the power plug from the AC outlet and antenna for your safety.

extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

IMPORTANT RECYCLING INFORMATION

This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information, please contact your local authorities, or the Electronic Industries Alliance: http://www.eiae.org

• As an “ENERGY STAR®” partner, JVC has determined that this product or product model meets the “ENERGY STAR®” guidelines for energy efﬁ ciency.

Important Safeguards

CAUTION:

Please read and retain for your safety.

Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety. But improper use can result in potential electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this TV set, observe the following basic rules for its installation, use and servicing. Also follow all

warnings and instructions marked on your TV set.

INSTALLATION

1 Your TV set is equipped with a polarized AC line plug (one

blade of the plug is wider than the other). This safety feature allows the plug to fit into the power outlet only one way. Should you be unable to insert the plug fully into the outlet, try reversing the plug. Should it still fail to fit, contact your electrician.

2 Operate the TV set only from a power source as indicated on the TV set or refer to the

operating instructions for this information. If you are not sure of the type of power supply to your home, consult your TV set dealer or local power company. For battery operation, refer to the operating instructions.

3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords

and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement.

4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set

where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.

5 Do not use this TV set near water — for example, near a bathtub, washbowl, kitchen sink, or

laundry tub, in a wet basement, or near swimming pool, etc.

6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded

so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection requirements for the grounding electrode.

(POLARIZED-TYPE)

7 An outside antenna system should not be located in the vicinity of overhead power lines

or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

ANTENNA LEAD IN WIRE

GROUND CLAMP

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

ELECTRICAL SERVICE EQUIPMENT

NEC - NATIONAL ELECTRIC CODE

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ARTICLE 250, PART H)

8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during

operation to be released.

Therefore:

— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa,

rug, etc.

— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided. — Never cover the openings with a cloth or other material. — Never place the TV set near or over a radiator or heat register.

9 To avoid personal injury:

— Do not place a TV set on a sloping shelf unless properly secured.

— Use only a cart or stand recommended by the TV set manufacturer. — Do not try to roll a cart with small casters across thresholds or deep pile carpets. — Wall or shelf mounting should follow the manufacturer’s instructions, and should use a

mounting kit approved by the manufacturer.

Use

10 Caution children about dropping or pushing objects into the TV set through cabinet

openings. Some internal parts carry hazardous voltages and contact can result in a fire or electrical shock.

11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol

cleaner.

12 Never add accessories to a TV set that has not been designed for this purpose. Such

additions may result in a hazard.

PORTABLE CART WARNING

(Symbol provided by RETAC)

13 For added protection of the TV set during a lightning storm or when the TV set is to be left

unattended for an extended period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to product due to lightning storms or power line surges.

14 A TV set and cart combination should be moved with care. Quick stops, excessive force,

and uneven surfaces may cause the TV set and cart combination to overturn.

Service

15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel

under the following conditions: A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into the TV set. C. If the TV set has been exposed to rain or water. D. If the TV set does not operate normally by following the operating instructions. Adjust

only those controls that are covered in the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV set to normal operation.

E. If the TV set has been dropped or damaged in any way. F. When the TV set exhibits a distinct change in performance — this indicates a need for

service.

16 Do not attempt to service this TV set yourself as opening or removing covers may

expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

17 When replacement parts are required, have the service technician verify in writing that the

replacement parts he uses have the same safety characteristics as the original parts. Use of manufacturer’s specified replacement parts can prevent fire, shock, or other hazards.

18 Upon completion of any service or repairs to this TV set, please ask the service technician

to perform the safety check described in the manufacturer’s service literature.

19 When a TV set reaches the end of its useful life, improper disposal could result in a picture

tube implosion. Ask a qualified service technician to dispose of the TV set.

20 Note to CATV system installer.

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Warnings

Screen Burn-in

Displaying ﬁ xed images on your screen for extended periods of time can leave a subtle but permanent ghost image in your screen. This is referred to as "burn-in". To avoid this, mix your viewing patterns and aspect modes from time to time.

Examples include, but are not limited to the following:

• Stock-market report bars

• Shopping channel logos and pricing displays

• Video game patterns or scoreboards

• Bright station logos

• Internet web sites or other computer-style images.

• DVD discs, video tapes, laser discs

• Broadcast, cable, satellite channels or digital television tuners/converters.

• Aspect modes that leave solid black bars on the top and bottom, or both sides of the screen.

Note: Warranty DOES NOT cover screen burn-in or uneven picture tube aging.

TV on

Caring for the Cabinet

Normally, light dusting with a soft, non-scratching duster will keep your TV clean.

If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly moistened with water. You can add a few drops of mild liquid detergent to the water to help remove spots of oily dirt.

• DO NOT allow liquid to enter the TV through the ventilation slots.

• DO NOT use strong or abrasive cleaners on the TV.

• DO NOT spray liquids or cleaners directly on the TV’s surface.

• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.

For example...

TV off

XYZ XYZ

Caring for the Screen

The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.

Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen. These will remove the coating layer and cause discolorations.

Do not push or hit the screen. This could cause scratches on the screen surface and image distortions.

Important Safety Precautions . 2

Warnings . . . . . . . . . . . . 6

Quick Setup . . . . . . . . . . . 9

Unpacking your TV . . . . . . . . . . . . 9

TV Models . . . . . . . . . . . . . . . . 11

TV Remote Control . . . . . . . . . . . 12

Getting Started . . . . . . . . . . . . . 13

The Remote Control . . . . . . . . . . 13

Connecting Your Devices . . . . . . . 14

Interactive Plug In Menu . . . . . . . . 23

Remote Programming . . . . . 26

Setting CATV, VCR and DVD Codes . . . 26

CATV or Satellite Codes . . . . . . . . 26

VCR Codes . . . . . . . . . . . . . . 27

DVD Codes . . . . . . . . . . . . . . 28

Search Codes . . . . . . . . . . . . . 29

Onscreen Menus . . . . . . . . 30

Using the Guide . . . . . . . . . . . . . 30

Onscreen Menu System . . . . . . . . . 31

Initial Setup . . . . . . . . . . 33

Auto Tuner Setup . . . . . . . . . . . . 33

Channel Summary . . . . . . . . . . . . 34

Channel Label . . . . . . . . . . . . . 35

V-Chip . . . . . . . . . . . . . . . . . . 36

Set Lock Code . . . . . . . . . . . . . 42

Adjusting CRT Color Convergence . . . . 43

Language . . . . . . . . . . . . . . . . 45

Closed Caption . . . . . . . . . . . . . 46

Auto Shut Off . . . . . . . . . . . . . . 48

XDS ID . . . . . . . . . . . . . . . . . 48

Noise Muting . . . . . . . . . . . . . . 48

Front Panel Lock . . . . . . . . . . . . 49

V1 Smart Input . . . . . . . . . . . 49

Video Input Label . . . . . . . . . . 50

Position Adjustment . . . . . . . . . . . 51

Power Indicator . . . . . . . . . . . . . 51

Digital-In . . . . . . . . . . . . . . . . . 52

Digital-In Audio . . . . . . . . . . . . . 52

Picture Adjust . . . . . . . . . 53

Picture Settings . . . . . . . . . . . . . 53

Adjust Picture Settings . . . . . . . . . 53

Color Temperature . . . . . . . . . . . . 53

Digital Noise Clear . . . . . . . . . . . . 53

VSM . . . . . . . . . . . . . . . . 54

Natural Cinema . . . . . . . . . . . . . . . . 54

Reset . . . . . . . . . . . . . . . . . . 54

Table of Contents

Sound Adjust . . . . . . . . . 55

Sound Settings . . . . . . . . . . . . . 55

Adjust Sound Settings . . . . . . . . . 55

Reset . . . . . . . . . . . . . . . . 55

Clock/Timers . . . . . . . . . . 56

Set Clock . . . . . . . . . . . . . . . . 56

On/Off Timer . . . . . . . . . . . . . . . 57

Button Functions . . . . . . . 58

Power . . . . . . . . . . . . . . . . . . 58

Number Buttons . . . . . . . . . . . . . 58

Tune . . . . . . . . . . . . . . . 58

Input . . . . . . . . . . . . . . . . . . . 58

Channel +/- . . . . . . . . . . . . . 58

Volume +/- . . . . . . . . . . . . . 58

Return+/TV . . . . . . . . . . . . . . . 59

Sound . . . . . . . . . . . . . . . . . . 59

Video Status . . . . . . . . . . . . . . . 60

TheaterPro D6500K . . . . . . . . . . . 60

Sleep Timer . . . . . . . . . . . . . . . 61

ML/MTS . . . . . . . . . . . . . . . . . 61

Muting . . . . . . . . . . . . . . . . . . 61

Display . . . . . . . . . . . . . . . . . 62

C.C. . . . . . . . . . . . . . . . . . . . 62

Favorite . . . . . . . . . . . . . . . . 63

Aspect . . . . . . . . . . . . . . . . . 64

Aspect Ratios . . . . . . . . . . . . . 65

Menu . . . . . . . . . . . . . . . . . . 65

OK . . . . . . . . . . . . . . . . . . . 65

Back . . . . . . . . . . . . . . . . . . . 65

TV/CATV Slide Switch . . . . . . . . . . 66

VCR/DVD Slide Switch . . . . . . . . . 66

VCR Buttons . . . . . . . . . . . . . . . 66

DVD Buttons . . . . . . . . . . . . . . . 66

Super Focus . . . . . . . . . . . . . . . 66

Table of Contents

Digital Setup . . . . . . . . . 67

Digital Setup . . . . . . . . . . . . . 67

Antenna Level . . . . . . . . . . . . . 67

Digital Sound . . . . . . . . . . . . . 68

Software Version . . . . . . . . . . . . . 68

Software Update . . . . . . . . . . . . 68

Digital Button Functions . . . 69

Digital CH D/A (Digital/Analog) . . . . . 69

Sub Channel . . . . . . . . . . . . . 69

Guide . . . . . . . . . . . . . . . 69

OSD Information . . . . . . 70

Weak Signal . . . . . . . . . . . . . 70

No Program . . . . . . . . . . . . . 70

Appendices . . . . . . . . . . 71

Troubleshooting . . . . . . . . . . . . . 71

Warranty . . . . . . . . . . . . . . 72

Authorized Service Center . . . . . . . . . . 73

Specifications . . . . . . . . . . . . . 74

Notes . . . . . . . . . . . . . . . . . 75

Quick Setup Unpacking your TV

Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television, please check to make sure you have all of the following items. In addition to this guide, your television box should include:

Two AA

1 Television

DIGITAL IMAGE SCALING TECHNOLOGY

POWER

PULL/OPEN

1 Remote Control

POWER

DVD

CATVVCR

INPUT

SLEEP

DISPLAY C.C. D/A

TIMER

THEATER PRO

VIDEO STATUS

ASPECT

RETURN+

TUNE

SUB CH

/TV

ML/MTS SOUND GUIDE

FAVORITE

MUTING

CH +

VOL

–

CH –

BACK

VCR/DVD

VCR CHANNEL

TV/VCR

POWER

PREV NEXT

PLAY FFREW

REC

STOP PAUSE

OPEN/CLOSE

STILL/PAUSE

RM-C1270G

Batteries

AA Alkaline

Note: Your television and/or remote control may differ from the examples illustrated here.

Quick Setup Unpacking your TV

Once you have unpacked your television, the next step is to connect it to your antenna/ cable or satellite system and to connect the audio/video devices you want to use with your television. To make these connections you will use plugs like the ones illustrated below.

Coaxial Cables

Component Cables

Composite Cables

Audio Cables

Used to connect an external antenna or cable TV system to your TV.

S-Video Cable

Used to make video connections with S-Video VCRs, Camcorders and DVD players.

We recommend that before you start using your new television, you read your entire User’s Guide so you can learn about your new television’s many great features. If you’re anxious to start using your television right away, a quick setup guide follows on the next few pages.

Used to connect audio/ video devices like VCRs, DVD players, stereo amplifiers, game consoles, etc.

Quick Setup TV Models

NOTE: Before you connect your television to another device, please refer to the proper

diagrams for your specific TV and remote. These will help assist you in understanding how to connect your television to another device, as well as use the remote to set up your television.

Rear Panel Diagram

MODELS: AV-48P776 AV-56P776 AV-48P786 AV-56P786

Note: The terminal

labeled "SERVICE ONLY", is exclusively used to update the software version.

UNPLUG THE POWER CORD FROM AC OUTLET BEFORE REMOVING THE REAR COVER

When the rear cover is removed, follow "CAUTION AT DISASSEMBLY" procedure in the service manual before plugging the TV's power cord into an AC outlet. Failure to follow the procedure will result in PERMANENT damage to some of the television features. DÉBRANCHEZ LE CORDON DE LA PRISE DE COURANT C.A. AVANT DE RETIRER LE COUVERCLE ARRIÈRE. Une fois le couvercle arrière déposé suivez la procédure ««ATTENTION LORS DU DÉMONTAGE»» décrite dans la manuel de service avant de brancher le cordon du téléviseur dans une prise c.a. L'omission de suivre la procédure causera des dommages PERMANENTS à certaines fonctions du téléviseur.

Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

75Ω

(VHF/UHF)

OPTICAL OUT

Digital Audio

SERVICE

ONLY

AUDIO

R L

OUT

VIDEO S-VIDEO

OVER

INPUT-3

INPUT-2

INPUT-1

DIGITAL-IN

VIDEO (DIGITAL)

AUDIO (DIGITAL)

COMPONENT VIDEO

Y Pb Pr

Front Panel Diagram

DIGITAL IMAGE SCALING T

ECHNOLOG

POWER

PULL/OPEN

Pull to open the door

DIGITAL IMAGE SCALING TECHNOLOGY

POWER

PULL/OPEN

MODELS: AV-48P776, AV-56P776, AV-48P786, AV-56P786

INPUT- 4

S-VIDEO VIDEO AUDIO

OVER

RL / MONO

P U

- 4

S-VIDE

VIDEO

V E R

AUDIO L / M

DIGITAL IMAG

E SCALING T

ECHNOLOG

CHANNEL

– + – +

POWER

VOL

UME

OPE

RATE

SUPER FOCUS

PULL/OPEN

MENU CHANNEL VOLUME SUPER

– + – +

OPERATE

FOCUS

Quick Setup TV Remote Control

CATV VCR

SLEEP TIMER

THEATER PRO

VIDEO STATUS

ASPECT

SUB CH

FAVORITE

MUTING

VOL

–

VCR CHANNEL

PREV NEXT

REC

OPEN/CLOSE

POWER

DVD

INPUT

DISPLAY C.C. D/A

RETURN+

TUNE

ML/MTS SOUND GUIDE

CH +

VOL

CH –

BACK

VCR/DVD

TV/VCR

POWER

PLAY FFREW

STOP PAUSE

STILL/PAUSE

RM-C1270G

/TV

RM-C1270G

• For information on remote control buttons, see pages 58 - 66.

• SUB CHANNEL and GUIDE buttons are for digital channels. If your TV is connected to an ATSC antenna or Digital Cable, you can use these buttons.

Quick Setup Getting Started

Getting Started

These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away.

If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual.

Step 1 – The Remote Control

Before you can operate your remote control, you first need to install the batteries (included).

Lift and pull the latch on the back of the remote control to open. Insert two batteries (included) carefully noting the “+” and “–” markings, placing the “–” end in the unit first. Snap the cover back into place.

When you change the batteries, try to complete the task within three minutes. If you take longer than three minutes, the remote control codes for your VCR, DVD, and/or cable box/satellite receiver may have to be reset. See pages 26 - 29.

Key Feature Buttons

The four key feature buttons at the center of the remote can be used for basic operation of the television. The top and bottom buttons will scan forward and back through the available channels. To move rapidly through the channels using JVC’s Hyperscan feature, press and hold CH+ or CH –. The channels will zip by at a rate of five channels per second. The right and left buttons will turn the volume up or down. These buttons are also marked with four arrows and are used with JVC’s onscreen menu system. To use the onscreen menus, press the M

ENU button.

MUTING

VOL

–

CH +

CH –

VOL

BACK

Basic Operation

Turn the television on and off by pressing the POWER button at the top right corner of the remote. If this is the first time you are turning on the TV, the interactive plug-in menu appears.

• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if

you need to operate a cable box.

• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to

DVD to control a DVD player. Please see pages 26 to 29 for instructions on programming your remote control to operate a cable box, VCR or DVD player.

CATV

VCR DVD

POWER

Quick Setup Connections

Step 2 – Connecting Your Devices

Notes:

• These connections are examples.

• After you are finished connecting your devices, plug the power cord into the nearest power outlet and turn on the TV.

• To connect a DVD player, see VCR Connection. A DVD player is optional

• If you have a satellite television system, refer to the satellite TV manual.

No VCR Connection

Cable or Antenna Output

Coaxial Cable

75Ω

(VHF/UHF)

TV Rear Panel

OUT IN

Cable Box

Note:

• If you do not have a cable box, connect the cable wire from the wall outlet into the back of the TV.

Quick Setup Connections

VCR Connection

Notes:

• Green, blue and red are the most common colors for DVD cables. Some models may vary

colors. Please consult the user’s manual for your DVD player for more information.

• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete

one set of connections (DVD or audio output) before starting the other to avoid accidentally switching the cables.

• You may also connect the DVD player to Input 1.

Diagram #1

Cable or Antenna

Output

VCR

OUT

R L V

OUT

Coaxial Cable

(Attachment)

(VHF/UHF)

75Ω

OPTICAL OUT

Digital Audio

AUDIO

OUT

AUDIO

R L

VIDEO S-VIDEO

OVER

INPUT-3

INPUT-2

INPUT-1

COMPONENT VIDEO

Y Pb Pr

TV Rear Panel

Y P

AUDIO OUT

L R

DVD Player (OPTIONAL)

Note:

• If this connection setup does not work for you, try the connection setup on page 16.

OUT

Green

Blue

Red

Quick Setup Connections

Diagram #2

Cable or Antenna

Output

Two-Way Splitter

Coaxial Cable

(Attachment)

(VHF/UHF)

OPTICAL OUT

Digital Audio

TV Rear Panel

OUT OUT

OUT

R L V

OUT

VCR

OUT

AUDIO

R L

VIDEO S-VIDEO

OVER

AUDIO OUT

L R

INPUT-3

INPUT-2

INPUT-1

Y P PR

COMPONENT VIDEO

Y Pb Pr

OUT

Green

Blue

Red

75Ω

AUDIO

DVD Player (OPTIONAL)

Quick Setup Connections

Connecting to a Camcorder

You may connect a camcorder, game console or other equipment to your television by using the front input jacks (Input 4) located under the front panel door. To access, pull on the door to open it. You can also connect these using the television’s rear input jacks, using the same instructions.

INPUT- 4

S-VIDEO VIDEO AUDIO

OVER

RL / MONO

- OR -

1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on

the front of the TV, OR connect an S-Video cable from the front of the TV to the camcorder.

2) Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on

the front of the TV.

3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on

the front of the TV.

Note:

• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the

L/MONO on the front of the TV.

MENU CHANNEL VOLUME SUPER

– + – +

OPERATE

FOCUS

CAMCORDER

Quick Setup Connections

Connecting to an External Amplifier

TV Rear Panel

AUDIO

OUT

Speaker Speake

1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the LEFT AUDIO INPUT on the amplifier.

2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the RIGHT AUDIO INPUT on the amplifier.

Notes:

• Refer to your amplifier’s manual for more information.

• You can use AUDIO OUTPUT for your home theater system.

Amplifier

Quick Setup Connections

Connecting to an amplifier using your optical output

You can connect an amplifier that has an optical digital input terminal by using an optical digital cable from the optical output. The signal that is output can be PCM or Dolby Digital.

TV Rear Panel

OPTICAL OUT

Digital Audio

1) Connect the optical cable from the back of the TV to the back of the amplifier.

Notes:

• This terminal can only output digital audio.

• In order to use the optical output connection, select PCM or Dolby Digital on Digital Sound in

the Digital Setup Menu. See page 68.

• Refer to your owners manual on using your amplifier.

Amplifier

Quick Setup Connections

Connecting to a Digital TV Receiver

By connecting a Digital TV Reciever, high definition pictures can be displayed on your TV in their digital form.

DTV Decoder

AUDIO OUTDIGITAL OUT

75Ω

(VHF/UHF)

OPTICAL OUT

Digital Audio

AUDIO

OUT

AUDIO

R L

VIDEO S-VIDEO

OVER

COMPONENT VIDEO

Y Pb Pr

INPUT-3

INPUT-2

INPUT-1

TV Rear Panel

HDMI to DVI Cable

After the connections have been made,

DIGITAL-IN

VIDEO (DIGITAL)

AUDIO (DIGITAL)

tighten the screw to secure the cables.

1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to the DIGITAL-IN on the back of your television.

2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT, to the RIGHT AUDIO IN into VIDEO-3 on the back of your television.

3) Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFT AUDIO IN into VIDEO-3 on the back of your television.

• The digital-in terminal is not compatible with the picture signal of a personal computer.

• Use a HDMI to DVI cable (commercially available) in order to digitally connect the television

with a DTV decoder.

Notes:

• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance

may be slightly shifted. Access the “DIGITAL-IN” in the initial setup menu to adjust it. (Refer to page 52.)

• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to

ANALOG. See "DIGITAL-IN AUDIO", page 52.

Quick Setup Connections

Connecting to a HDMI Compatible Device

By connecting a HDMI compatible device, high definition pictures can be displayed on your TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI compatible device.

HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all digital audio/video interface. HDMI provides and interface between any audio/video source, such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a digital television (DTV).

HDMI Compatible Device

DIGITAL OUT

AUDIO OUT

HDMI Cable

TV Rear Panel

DIGITAL-IN

VIDEO (DIGITAL)

AUDIO (DIGITAL)

1) Connect the HDMI Cable from the DIGITAL OUT on the back of your DTV or HDMI device, to the DIGITAL-IN on the back of your television.

Notes:

• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to DIGITAL. See "DIGITAL-IN AUDIO", page 52.

• Some decoders may not respond depending on the equipment that you have connected when it is connected to the HDMI.

• If the HDMI output device signal is changed (for example, 480i/60Hz is changed to 480p/60Hz), the screen may turn green and there may be some distortion for a short time until the signal becomes stable.

Quick Setup Connections

Connecting to an AV Receiver using your television's V1 Smart Input

By connecting your AV Receiver to your television's V1 Smart Input, you can watch picture sources from many different devices, without having to change or use the other input connections on your TV. This allows you to free up the other input connections so you can connect more devices to your television.

AV Receiver

MONITOR

OUT

MONITOR OUT

TV Rear Panel

75Ω

(VHF/UHF)

OPTICAL OUT

Digital Audio

AUDIO

OUT

R L

VIDEO S-VIDEO

OVER

INPUT-3

INPUT-2

INPUT-1

COMPONENT VIDEO

Y Pb Pr

AUDIO

1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-1 on the back of your television.

2) Connect a Yellow Composite Cable from the AV Receiver's MONITOR OUT, into the VIDEO INPUT-1 on the back of your television.

3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y VIDEO INPUT-1 on the back of your television.

4) Connect a Blue Component Cable from the AV Receiver's P

B MONITOR OUT, into the Pb

VIDEO INPUT-1 on the back of your television.

5) Connect a Red Component Cable from the AV Receiver's PR MONITOR OUT, into the Pr VIDEO INPUT-1 on the back of your television.

Note:

• Please refer to your AV Receiver instruction manual for more information on connecting your

speakers and other devices like a DVD player.

• Use your AV Receiver's remote to switch to the different devices you have connected.

• Some AV Receivers may not respond when the V1 Smart Input function is turned on.

• If you have video connections for each input device connected to your AV Receiver, you

should not connect them using both S-Video and Composite connection at the same time when you are using V1 Input as the V1 Smart Input. In this case we recommend using the S-Video connection.

Quick Setup Plug-In Menu

Step 3 – The Interactive Plug In Menu

When you turn your television on for the first time the interactive plug-in menu will appear. The plug-in menu helps you to get your TV ready to use by letting you set your preferences for:

• The language in which you want the onscreen menus to appear.

• Setting the TV’s clock to the correct time so your timer functions will work properly. You can

choose “AUTO” or “MANUAL” for setting the clock.

• The auto tuner setup of which channels you wish to receive.

We recommend you complete the interactive plug-in items before you start using your television.

Notes:

• The interactive plug-in menu setting does not appear if your TV has been turned on before.

In this case use the onscreen menus to perform these settings. See pages 45, 56 and 33.

• If you press the Menu button while setting up the interactive plug-in menu, it will skip over it.

Language

After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically switches to the LANGUAGE settings. You can choose to view your onscreen menus in three languages: English, French (Français) or Spanish (Español).

LANGUAGE/LANGUE/IDIOMA

ENGLISH

SELECT OPERATE EXIT

√®

To choose a language:

(English, Français or Español)

†

To NEXT (To set clock)

(To be continued...)

Quick Setup Plug-In Menu

Auto Clock Set

Before you use any of your TV’s timer functions, you must first set the clock. You may precisely set your clock using the XDS time signal broadcast by most public analog broadcasting stations. If you do not have this in your area, you will have to set the clock manually. See manual clock set below. To set the clock using the XDS signal:

√®

SET CLOCK

MODE

TIME

TIME ZONE D.S.T.

SELECT OPERATE EXIT

AUTO

: --

ATLANTIC

Notes:

• D.S.T. can be used when it is set to ON in the SET CLOCK menu.

• Only when the MODE is set to AUTO, the Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in October.

• You will have to reset the clock after a power interruption. You must set the clock before

operating any timer functions.

Manual Clock Set

To choose AUTO

†

To TIME ZONE

√®

To select your time zone: (Atlantic, Eastern, Central, Mountain, Pacific, Alaska or Hawaii)

†

To move to D.S.T. (Daylight Savings Time)

√®

To turn D.S.T. ON or OFF

†

To NEXT (To Auto Tuner Setup)

To set your clock manually (without using the XDS signal), choose MANUAL. If you choose AUTO, see auto clock set above.

√®

SET CLOCK

MODE TIME TIME ZONE D.S.T.

START CLOCK

SELECT OPERATE EXIT

MANUAL

: --

ATLANTIC

To choose MANUAL

†

√®

†

To minute

√®

†

To TIME ZONE

√®

Central, Mountain, Pacific, Alaska or Hawaii)

†

To move to D.S.T. (Daylight Savings Time)

√®

†

To START CLOCK

To TIME

To set the hour

To set the minute

To select your time zone: (Atlantic, Eastern,

To turn D.S.T. ON or OFF

Note:

• You will have to reset the clock after a power interruption. You must set the clock before operating any timer functions.

(To be continued...)

Quick Setup Plug-In Menu

Auto Tuner Setup

In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the C

HANNEL +/– buttons) you will receive only clear, active channels.

AUTO TUNER SETUP

START

SELECT OPERATE EXIT

NOW

PROGRAMMING !

√®

skip AUTO TUNER SETUP)

AIRTUNER MODE

†

After Analog Auto Tuner Setup is finished, Digital Auto Tuner Setup starts.

To choose CABLE or AIR (or SKIP when you

To START

Now Programming...

When the setup is finished, "THANK YOU ! SETUP IS NOW COMPLETE" is displayed. Your quick setup is now complete. You can now begin watching your television, or you can continue on in this guide for more information on programming your remote control, or using the JVC onscreen menu system to customize your television viewing experience.

Notes:

• If you want to cancel the Auto Tuner Setup, press the MENU button.

• Noise muting will not work during Auto Tuner Setup.

• If you choose SKIP, it finished without doing the Auto Tuner Setup.

Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is normal.

STOP

The Quick Setup is complete

Remote Programming

Setting the CATV, VCR and DVD Codes

You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer.

Cable Box or Satellite Codes

The remote control is programmed with cable box and satellite codes for power on/off, channel up/down, and 10 key operation.

1) Find the cable box or satellite brand from the list of codes shown below.

2) Slide the 2-way selector switch to “CATV”.

3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10 key pad.

4) Release the DISPLAY button, and confirm the operation of the cable box/satellite receiver.

• If your cable or satellite box does not respond to the first code, try the others listed. If it does

not respond to any code, try the search codes function, on page 29.

Cable Box CODES

ABC Archer Cableview Citizen Curtis Diamond Eagle Eastern GC Brand Gemini General Instrument

Hamlin

Hitachi Jerrold

Macom

Magnavox Memorex

Movietime Oak Panasonic

Paragon

Philips

Pioneer Pulsar

024 032, 025 051, 032 022, 051 058, 059 024, 032, 025 029 034 032, 051 022, 043 065, 024, 025,

026, 027, 020, 021, 022, 057,

023 040, 041, 042, 045, 058, 064 049, 024

065, 024, 025, 026, 027, 020, 021, 022, 057, 023

049, 050, 051, 054

033 030 032, 051 039, 037, 048 055, 056, 060,

071, 073 063

028, 029, 030, 052, 053, 031, 069

047, 062

051, 032

Cable Box CODES

Puser RCA Realistic Regal

Regency Rembrandt

Samsung Scientific Atlanta SLMark Sprucer Stargate

Telecaption Teleview Texscan

Tocom Toshiba Unika

Universal

Videoway Viewstar Zenith Zenith/Drake

Satellite

032 061, 070 032 058, 064, 040,

041, 042, 045, 068 034

037, 032, 051, 038

051 057, 058, 059 051, 047 051, 056 032, 051

067 047, 051 044 035, 036, 066 050 032, 025

022, 032 052 029, 030 063, 046 046

Digital Satellite Systems

Echostar

Express VU

G.E. G.I. Gradiente

Hitachi

HNS (Hughes) Panasonic

Philips

Primestar

Proscan RCA Sony Star Choice Toshiba Uniden

CODES

100, 113, 114, 115

100, 113

106 108

112 104, 111

104 105 102, 103

108

106, 109, 110 106, 109, 110

107 104, 108 101 102, 103

Remote Programming

VCR Codes

The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward, rewind, pause, record, channel up/down operation.

1) Find the VCR brand from the list of codes shown below.

2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.

3) Press and hold down the D key pad.

4) Release the DISPLAY button, and confirm the operation of the VCR.

• If your VCR does not respond to the first code, try the others listed. If it does not respond to

any of the codes, try the search codes function on page 29.

• After you program your remote, some VCR buttons may not work properly. If so, use the

VCR’s remote.

• To record, hold down the R

ISPLAY button, then enter the first code number listed with the 10

EC button on the remote and press PLAY.

VCRs CODES

Admiral Aiwa Akai

Audio Dynamic Bell & Howell Broksonic Canon CCE Citizen Craig Curtis Mathes

Daewoo

DBX Dimensia Emerson

Fisher

Funai

G.E. Go Video

Goldstar Gradiente

Hitachi

Instant Replay Jensen JVC

Kenwood

LXI 027, 064, 058,

Magnavox

035 027, 032, 095 029, 072, 073,

074 003, 005 063, 071 020, 026, 094 023, 025 043 064 063, 029, 064 045, 024, 027,

093 043, 059, 024,

092 003, 004, 005 045, 093

043, 026, 077, 061, 025, 042, 020, 076

063, 066, 067, 065, 071, 091

027, 026, 020, 000

033, 045, 024 037, 051, 049,

050, 089 064 083, 084, 081,

000, 001 023, 045, 058,

027, 081, 093

024, 023 003 000, 001, 002,

003, 004, 005 003, 004, 064,

005

065, 066, 063, 067

031, 023, 024, 086

VCRs CODES

Marantz Marta Memorex MGA

Minolta Mitsubishi

Multitech NEC

Olympic Optimus

Orion Panasonic

Penney

Pentax

Philco

Philips

Pioneer Proscan

Quasar

Radio Shack

RCA

Realistic 024, 063, 036,

003, 004, 005 064 024, 067 038, 040, 047,

048, 041, 042 058, 045, 093 038, 040, 047,

048, 041, 042, 078, 090

047, 027, 062 003, 004, 005,

000 024, 023

028, 021, 035, 064 026, 020

023, 024, 021, 022

024, 058, 045, 063, 003, 004, 005, 093

058, 005, 045, 093

031, 024, 027, 023, 026, 020, 043

031, 023, 024, 086

023 045, 058, 023,

024, 031, 046, 059, 060, 033, 087, 093

021, 022, 023, 024

033, 024, 063, 036, 067, 040, 027

033, 045, 058, 023, 024, 031, 046, 059, 060, 083, 084, 085, 087, 093

067, 040, 027

VCRs CODES

Samsung

Samtron Sansui

Sanyo

Scott

Sears

Shintom Sharp

Signature 2000 Singer Sony

SV 2000 Sylvania

Symphonic Tashiro Tatung Tea c

Technics

Teknika Toshiba Vector Research Wards

Yamaha

Zenith 044, 082, 064,

037, 060, 062, 033, 089

089 003, 026, 020,

052 063, 067, 091,

071 059, 060, 062,

067, 038, 040, 047, 048, 026, 020

063, 064, 065, 066, 058, 000, 001 075

035, 036, 080, 088 027, 035

075 028, 029, 030,

053, 054, 055 027 031, 023, 024,

027 027, 081

064 003, 004, 005 003, 004, 027,

005 021, 022, 023,

024 024, 027, 070 059, 046, 079 005

035, 036, 067, 044, 064

063, 003, 004, 005

094

Remote Programming

DVD Codes

The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward, rewind, previous/next chapter, tray open/close, and still/pause operation.

1) Find the DVD player brand from the list of codes shown below.

2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.

3) Press and hold down the D key pad.

4) Release the D

• If your DVD player does not respond to the first code, try the others listed. If it does not

respond to any of the codes, try the search codes function on page 29.

• After you program your remote, some DVD buttons may not work properly. If so, use the

DVD player’s remote.

ISPLAY button, and confirm the operation of the DVD player.

ISPLAY button, then enter the first code number listed with the 10

DVD Player CODES

Aiwa Apex Denon Hitachi JVC Kenwood Konka Mitsubishi Onkyo Oritron Panasonic Philips Pioneer Raite

043 040 020, 037 030, 031 000 035 039 025 041 044 020 023, 036 022 033

DVD Player CODES

RCA Sampo Samsung Sharp Silvania Sony

021, 026 034 030 028 038

024, 045, 046,

047 Technics Toshiba

020

023 Vialta 050 Wave Yamaha Zenith

042

020

027, 032

Remote Programming

Search Codes

Cable/Satellite Search Codes Function

1) Slide the first 2-Way Mode Selector switch to CATV.

2) Press the POWER and RETURN+/TV buttons. Hold for at least three seconds and release.

3) Press the P

4) If there was a response, press R response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use the remote control that came with your equipment.

5) Press RETURN+/TV to exit.

VCR/DVD Search Codes Function

1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or “DVD”.

2) Press the VCR or DVD P and release.

3) Press the VCR or DVD POWER button, and see if the VCR or DVD responds.

4) If there was a response, press RETURN+/TV. The codes are now set. If there was no response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for the DVD player), and there is no response, use the remote control that came with your equipment.

5) Press RETURN+/TV to exit.

OWER button on the remote, and see if the cable or satellite box responds.

ETURN+/TV. The codes are now set. If there was no

OWER and RETURN+/TV buttons. Hold for at least three seconds

Onscreen Menus

Using the Guide

Certain symbols are used throughout this guide to help you learn about the features of your new television. The ones you will see most frequently are:

π†

Up and Down arrows mean press the CH+ or CH– buttons. Pressing the CH+ or CH–

buttons let you:

• Move vertically in a main menu screen

• Move through a submenu screen

• Move to the next letter, number, or other choice in a submenu

• Back up to correct an error

• Scan through TV channels (when not in a menu screen)

√®

Left and right arrows mean press the VOLUME+ or VOLUME– buttons to move left or right

to:

• Select a highlighted menu item

• Select an item in a submenu

• Select numbers in certain menu options

• Turn the volume up or down (when not in a menu screen)

The “press button” icon means you should press the button named on your remote

control. (Button names appear in S

The “helping arrow” icon points to the highlighted or selected item in a menu.

To bring up the onscreen menu, press the MENU button on the remote control. The item that appears in green is the one currently selected. If you use the Menu button on the TV’s front panel instead of the remote, an additional menu screen showing INPUT, VIDEO STATUS and ASPECT will appear between INITIAL SETUP and PICTURE ADJUST. The “interactive plug-in menu” will appear the first time the TV is plugged in.

MALL CAPITAL LETTERS.)

PREVIOUS AUTO TUNER SETUP CHANNEL SUMMARY V-CHIP SET LOCK CODE CONVERGENCE

NEXT PAGE SELECT OPERATE EXIT

INITIAL SETUP

(4/5)

Note:

• Menus shown in this book are illustrations, not exact replications of the television’s onscreen displays.

Onscreen Menus

The Onscreen Menu System

Your television comes with JVC’s onscreen menu system. The onscreen menus let you make adjustments to your television’s operation simply and quickly. Examples of the onscreen menus are shown on the next page. Detailed explanations on using each menu follow later in this guide. For information about the interactive plug-in Menu, see pages 23 - 25.

The Onscreen Menu System

To open the onscreen menu system, press the MENU button on the remote control. You navigate within the onscreen menus by using the four directional arrow buttons on the remote control. (These buttons are also the CH +/– and VOL +/– buttons. Channel and volume functions will not operate when the onscreen menu is active).

The selected feature and option on a menu screen are highlighted in a different color.

Selected Option (Green)

To move to a different feature use the π† arrows to move up or down the list. When you press the up arrow at the top of the list or the down arrow at the bottom, the next menu screen will appear. Use the arrows √ ® to select an option from the highlighted feature. Pressing

ENU on the remote control will close the onscreen menu system and return you to normal

M television viewing.

Each menu and its features will be discussed in the following pages of this guide.

Notes:

• If you do not press any buttons for a few seconds, the onscreen menu will automatically shut off.

• Button names in this guide are shown in S

• Menus may appear in different sizes onscreen depending on the aspect ratio selected.

• Some menu items may not appear in menu screens when certain aspect ratios or inputs are selected.

LANGUAGE CLOSED CAPTION

ENG. FRAN. ESP.

MALL CAPITAL LETTERS.

Selected Option (Blue)

Onscreen Menus

Press the MENU button

TO INITIAL SETUP 03

INITIAL SETUP

PREVIOUS AUTO TUNER SETUP CHANNEL SUMMARY V-CHIP SET LOCK CODE CONVERGENCE

NEXT PAGE SELECT OPERATE EXIT

INITIAL SETUP 04

INITIAL SETUP

PREVIOUS DIGITAL SETUP

NEXT PAGE SELECT OPERATE EXIT

INITIAL SETUP 05

PICTURE ADJUST

TINT COLOR PICTURE BRIGHT DETAIL COLOR TEMPERATURE

NEXT PAGE SELECT OPERATE

STANDARD 00 00 00 00 00

HIGH

PICTURE ADJUST 01

CLOCK / TIMERS

PREVIOUS SET CLOCK ON / OFF TIMER

(4/5)

SELECT OPERATE EXIT

CLOCK/TIMERS

SOUND ADJUST

BASS

TREBLE

BALANCE

RESET

(5/5)

NEXT PAGE SELECT OPERATE EXIT

SOUND ADJUST

PICTURE ADJUST

PREVIOUS STANDARD DIG. NOISE CLEAR NATURAL CINEMA VSM

RESET

(1/2)

EXIT

SELECT OPERATE EXIT

PICTURE ADJUST 02

OFF

AUTO

(2/2)

INITIAL SETUP

AUTO

DIGITAL

PREVIOUS DIGITAL-IN DIGITAL-IN AUDIO

SELECT OPERATE EXIT

INITIAL SETUP 01

INITIAL SETUP

PREVIOUS NOISE MUTING FRONT PANEL LOCK V1 SMART INPUT VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR

NEXT PAGE SELECT OPERATE EXIT

OFF

INITIAL SETUP 02

INITIAL SETUP

PREVIOUS LANGUAGE CLOSED CAPTION AUTO SHUT OFF XDS ID

SELECT OPERATE EXIT

ENG. FRAN. ESP.

OFF

INITIAL SETUP 03

(1/5)

(2/5)

(3/5)

TO INITIAL SETUP 04

Notes:

• The DIGITAL-IN menu can only be displayed when a 480p picture signal is input to the digital-in terminal and the picture is being displayed on the screen.

• When the Menu button on the TV front panel is pressed, the FRONT PANEL CONTROL menu between INITIAL SETUP 05 and PICTURE ADJUST 01 will appear.

• Regarding the digital setup menu, see page 67.

Initial Setup

Auto Tuner Setup

The auto tuner setup function is described on page 25 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below.

Press the M

π†

√® √®

Programming will take approximately 2 to 4 minutes. The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.

To AUTO TUNER SETUP To operate To choose CABLE or AIR Press the OK button to start

ENU button

AUTO TUNER SETUP

AIRTUNER MODE

PRESS OK TO START

SELECT OPERATE EXIT

Press the Menu button when finished

Initial Setup

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV. Regarding analog channels, you can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels. Regarding digital channels, the only channels that will appear are the ones that are broadcasting.

Press the M

π†

√®

To CHANNEL SUMMARY

To operate

ENU button

The Channel summary screen will now be displayed with the channels set to scan marked with an “√”. Regarding analog channels, you can delete channels from the scan by removing the “√”. If any channels were missed during auto tuner setup and you wish to add them, you may by placing an “√” next to the channel number.

• Digital channels can not be added to the channel summary if the auto tuner setup did not find them.

π† √® To the SCAN column

Press the OK button to include or delete from

scan

Press the MENU button when finished

Note:

• The number of a digital channel may change, depending on the time of some broadcastings. If this channel existed and now had disappeared, the lock channel or scanned channel by the channel summary for that channel will be cancelled.

Analog Channels

CHANNEL SUMMARY

CHNO.

SCAN CHNO. SCANID ID 01 02

MTV 03 04

A&E 05

SELECT OPERATE EXIT

06 07 08 09 10

Digital Channels

Channel Summary Digital

CH No.

Scan

Station Name

D01

D02

D10-1

D10-2

D12345

Operate

FOX

ABC

CNN

NBC

BOX

NHK

BACK

Back

HBO

Exit

Initial Setup

How to set the channel label. (This is only for analog broadcasting.)

Press the M

π†

√®

π†

To CHANNEL SUMMARY To operate To the ID column

Press the O

√®

π†

To select the character you want To move to the next space

...continue to follow these directions for all four

spaces

Press the OK button to finish

Your characters are now set

Press the M

If you want to reset the characters you set:

Press the MENU button

π†

√®

π†

To CHANNEL SUMMARY To operate To the ID column

Press the OK button to enter

π†

To select RESET

Press the O

Your characters are now reset

ENU button

K button to enter

ENU button when finished

K button to finish

CHANNEL 09

RESET

SELECT OPERATE EXIT

PRESS TO FINISH

Notes:

• You can use characters for: Alphabet, numbers, marks and spaces.

• It is possible to set the maximum of 40 channel labels.

• If you try to set more than the 40 maximum, the message "MEMORY OVERFLOW" will appear.

You can block access to a channel by activating the channel lock.

Press the MENU button

π†

To CHANNEL SUMMARY

√®

To operate

π† √® To the Lock Column ( )

Press the Z

Press the M

ERO button to lock or unlock that channel

ENU button when finished

Initial Setup

Channel Guard Message

When a viewer attempts to watch a guarded channel, the following message appears:

To watch a channel that you have locked, enter the Lock Code using the 10 key pad. If the wrong code is entered, the message “INVALID LOCK CODE!” will flash on the screen.

The channel cannot be accessed until the correct code is entered.

Notes:

• Once a channel has been unlocked, it will remain unlocked until the television is turned off.

• See also “Set Lock Code”, page 42.

V-Chip

Your TV is equipped with V-Chip technology which enables you to block channels or content that you feel to be inappropriate for children, based on US and Canada rating guidelines. V-Chip has no effect on video signals from DVD discs or Camcorder connection.

Note: Some programs, and movies are broadcast without a ratings signal. Even if you set up V-CHIP ratings limits, these programs will not be blocked. See page 37 for information on how to block unrated programs.

You can customize the V-Chip settings of your television to match your personal tastes. The V-Chip menu below is the starting point for your V-Chip settings

THIS CHANNEL IS LOCKED BY CHANNEL GUARD. PLEASE ENTER LOCK CODE BY 10 KEY PAD TO UNLOCK IT.

NO. - - - -

You can use US V-Chip settings and movie ratings. You may use any or all of the settings (US V-Chip and Movie ratings). Descriptions for setting each of the three V-Chip formats appear in the next five pages along with descriptions of the rating categories.

To access the rating categories:

Press the MENU button

π†

√®

To V-CHIP To operate (Lock icon will appear)

Press ZERO to access the V-Chip menu

√®

To turn V-Chip ON or OFF (V-Chip must be

V-CHIP V-CHIP SET US TV RATINGS SET MOVIE RATINGS SET CANADIAN RATINGS ENG SET CANADIAN RATINGS FRE UNRATED

OFF

VIEW

turned ON for rating settings to operate)

π†

To move to SET US TV RATINGS or

SELECT OPERATE EXIT

SET MOVIE RATINGS. (see following pages for descriptions of each item)

Initial Setup

Unrated Programs

Unrated programming refers to any programming which does not contain a rating signal. Programming on television stations which do not broadcast rating signals will be placed in the “Unrated Programming” category.

Examples of Unrated programs:

• Emergency Bulletins • Locally Originated Programming

• News • Political Programs

• Public Service Announcements • Religious Programs

• Sports • Weather

• Some Commercials

Note:

• TV programs or movies that do not have rating signals will be blocked if the unrated category is set to BLOCK.

Directions to Block Unrated Programs

You can block programs that are not rated.

Press the MENU button

π†

√®

To V-CHIP To operate (The lock icon appears)

Press ZERO to access V-Chip setup options

π†

√®

To UNRATED To VIEW or BLOCK

Press MENU when done

V-CHIP V-CHIP SET US TV RATINGS SET MOVIE RATINGS SET CANADIAN RATINGS ENG SET CANADIAN RATINGS FRE UNRATED

SELECT OPERATE EXIT

OFF

VIEW

Initial Setup

US V-Chip Ratings

U.S. PARENTAL RATING SYSTEMS Programs with the following ratings are appropriate for children.

❒ TV Y is Appropriate for All Children

Programs are created for very young viewers and should be suitable for all ages, including children ages 2 - 6.

❒ TV Y7 is for Older Children

Most parents would find such programs suitable for children 7 and above. These programs may contain some mild fantasy violence or comedic violence, which children should be able to discern from reality.

Programs with the following ratings are designed for the entire audience. ❒ TV G stands for General Audience

Most parents would find these programs suitable for all age groups. They contain little or no violence, no strong language, and little or no sexual dialog or situations.

❒ TV PG Parental Guidance Suggested

May contain some, but not much, strong language, limited violence, and some suggestive sexual dialog or situations. It is recommended that parents watch these programs first, or with their children.

❒ TV 14 Parents Strongly Cautioned

Programs contain some material that may be unsuitable for children under the age of 14 including possible intense violence, sexual situations, strong coarse language, or intensely suggestive dialog. Parents are cautioned against unattended viewing by children under 14.

❒ TV MA Mature Audiences Only

These programs are specifically for adults and may be unsuitable for anyone under 17 years of age. TV MA programs may have extensive V, S, L, or D.

Viewing Guidelines

In addition to the ratings categories explained above, information on specific kinds of content are also supplied with the V-Chip rating. These types of content may also be blocked. The content types are:

• V/FV is for VIOLENCE/FANTASY VIOLENCE

• S stands for SEXUAL CONTENT

• L stands for strong LANGUAGE

• D stands for suggestive DIALOG

Setting US V-Chip Ratings

Initial Setup

Press the MENU button

π†

√®

To V-CHIP To operate (lock icon appears)

Press ZERO to access the V-Chip menu

√®

π†

√®

To turn V-Chip ON or OFF To move to SET US TV RATINGS

To operate

V-CHIP

V-CHIP SET US TV RATINGS SET MOVIE RATINGS SET CANADIAN RATINGS ENG SET CANADIAN RATINGS FRE UNRATED

SELECT OPERATE EXIT

OFF

VIEW

Directions to set US V-Chip Ratings

Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and press the feature on or off. An item is locked if the icon appears instead of a “—”.

For example. To block viewing of all TV 14 shows, move the cursor to the top row of that column and add a lock icon. Once you’ve put a lock on the top row, everything in that column is automatically locked.

π† √®

Press the MENU button when finished

Note:

• If you want to change the setup, move the cursor to

π† or √®

to move the cursor to the correct location. Press OK to turn the locking

To the TV 14 Column

Press the OK button to lock

the top column and change the lock icon to “—” by pressing OK again. You may then select individual categories to block.

SET US TV RATINGS

TVMATV14TVPGTVGTVY7TV

V/FV S L D

SELECT OPERATE

EXIT

Initial Setup

Movies Ratings

❒ NR – Not Rated

This is a film which has no rating. In many cases these films were imported from countries which do not use the MPAA ratings system. Other NR films may be from amateur producers who didn’t intend to have their film widely released.

NR (Not Rated) Programming may contain all types of programming including children’s programming, foreign programs, or adult material.

❒ G – General Audience

In the opinion of the review board, these films contain nothing in the way of sexual content, violence, or language that would be unsuitable for audiences of any age.

❒ PG – Parental Guidance

Parental Guidance means the movie may contain some contents such as mild violence, some brief nudity, and strong language. The contents are not deemed intense.

❒ PG-13 – Parents Strongly Cautioned

Parents with children under 13 are cautioned that the content of movies with this rating may include more explicit sexual, language, and violence content than movies rated PG.

❒ R – Restricted

These films contain material that is explicit in nature and is not recommended for unsupervised children under the age of 17.

❒ NC-17 – No One Under 17

These movies contain content which most parents would feel is too adult for their children to view. Content can consist of strong language, nudity, violence, and suggestive or explicit subject matter.

❒ X – No One under 18

Inappropriate material for anyone under 18.

Directions to set Movie (MPAA) Ratings

Press the MENU button

π†

√®

To V-CHIP To operate (Lock icon appears)

Press ZERO to access V-Chip setup options

π†

√®

To SET MOVIE RATINGS To enter movies menu

For example:

To block viewing of X and NC-17 rated from shows:

π† √®

To the X Column

Press the OK button to lock

To the NC-17 Column

Press the OK button to lock

Press the MENU button to finish

SET MOVIE RATINGS

SELECT OPERATE

EXIT

Initial Setup

Canadian V-Chip Ratings

❒ E – Exempt

Exempt programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming.

❒ C – Programming Intended for Children

Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or unrealistic in nature.

❒ C8+ – Programming Intended for Children 8 and Over

Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low intensity and will show the consequences of the acts. There will be no offensive language, nudity or sexual content.

❒ G – General Audience

Programming will contain little violence and will be sensitive to themes which could affect younger children.

❒ PG – Parental Guidance

Programming intended for a general audience, but which may not be suitable for younger children. Parents may consider some content not appropriate for children aged 8-13.

❒ 14+ – 14 Years and Older

Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens. Programming may contain mature themes and scenes of intense violence.

❒ 18+ – Adult

Material intended for mature audiences only.

Directions to set Canadian V-Chip Ratings

Press the MENU button

π†

√®

To V-CHIP To operate (lock icon appears)

Press ZERO to access V-Chip setup options

π†

√®

To SET CANADIAN RATINGS ENG (for English) To enter ratings menu

For example:

To block viewing of programming rated 14+ and 18+:

√®

To the 18+ Column Press the OK button to lock

To the 14+ Column

Press the OK button to lock

Press the MENU button to finish

SET CANADIAN RATINGS ENG

14+

18+

SELECT OPERATE

EXIT

Note:

• For instructions on “SET CANADIAN RATINGS FRE (in French)”, please see page 41 in the French side of this user’s guide.

Initial Setup

Set Lock Code

Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes preset with a lock code of “0000”. You may change the code to any four-digit number you wish. To change the lock code, follow the steps below.

Press the M

π†

√®

To SET LOCK CODE

To operate (lock icon appears)

Press ZERO to access the lock code

ENU button

SET LOCK CODE

LOCK CODE

0000

The first digit will be highlighted

√®

To select the number

π†

To move to the next digit

SELECT OPERATE EXIT

PRESS TO FINISH

Continue to follow these directions for all four numbers

Press the OK button to finish (your lock code is now set)

Press the Menu button when finished

When a viewer attempts to watch a blocked channel, this message appears:

THIS PROGRAMMING EXCEEDS YOUR RATING LIMITS. PLEASE ENTER LOCK CODE BY 10 KEY PAD TO UNLOCK IT. NO. - - - -

The channel will remain blocked until the correct lock code is entered (see above for information on setting your lock code).

Notes:

• After a power interruption you must reset the lock code.

• Write your lock code number down and keep it hidden from potential viewers.

• If you forget the lock code, a new code may be set using the steps listed above.

Initial Setup

Adjusting CRT Color Convergence

This TV has three color projection tubes: one for red, green, and blue. When mixed together in the proper portions, the output of these three color tubes can produce any color. To produce these colors, however, the beams must be precisely aligned over each other so that the colors can be mixed. The produce of aligning these picture beams is called “convergence”.

Attention:

• Please have your TV on for at least 20 minutes before using this feature.

• This adjustment will be needed only when the colors of the characters/lines are separated and lack in distinction. If not, please don’t perform the adjustment.

Colors may become separated after the TV has been moved, or over a long period of time if regularly subjected to low levels of vibrations. If the colors become separated, please perform the adjustments below again. In the beginning, please be sure to

perform AUTO convergence adjustment.

Auto

Press the M

π†

To CONVERGENCE

√®

To Enter

π†

To select “AUTO” (The convergence adjustment will

ENU button

CONVERGENCE

AUTO

MANUAL

RESET

SELECT OPERATE

start. It will take about 50 seconds).

When the adjustment is finished, it will return to what you

were watching.

SUPER FOCUS

Note:

• You can reset the adjustment if you do not like the results. See the next page.

• If you want to adjust it more, you can perform the manual color convergence adjustment.

See the next page.

• You can also access this feature by pressing the SUPER FOCUS button on the front panel of your TV.

INPUT- 4

S-VIDEO VIDEO AUDIO

OVER

OPEN

RL / MONO

MENU CHANNEL VOLUME SUPER

– + – +

OPERATE

FOCUS

SUPER FOCUS

EXIT

Initial Setup

Adjusting CRT Color Convergence (continued...)

Manual

Press the MENU button

π†

To CONVERGENCE

√®

To Enter

π†

To choose MANUAL

√®

To Enter

If all the lines are white, no convergence adjustment is necessary. If not, you need to perform the manual color

convergence below.

Select the location you want to adjust by using the

number buttons on the remote control.

You can select any of the 81 points.

Press the S

box to the color of the cross you wish to adjust (red or blue).

π† √®

Adjust the three color crosses until they overlap and appear as a single white

Notes:

• When you adjust the convergence, make sure you start with the center position (position 5),

• When you make the adjustment in the center (position 5), you are making the adjustment for

• You can reset the adjustment if you do not like the results. See below.

• If you perform AUTO convergence after performing MANUAL convergence, your manual

Adjust the position of the cross.

Press the OK button

and work your way around radially for best results.

the whole screen. In other positions, you are making the adjustment only in that area.

convergence you performed will be cancelled.

LEEP TIMER button to change the color of the

cross.

Reset

RESET resets all convergence adjustments to the factory default settings.

Press the M

π†

To CONVERGENCE

√®

To Enter

π†

To RESET

√®

To enter

When the adjustment is reset, it will return to what you were watching.

ENU button

Initial Setup

Language

The language function is described on page 23 as the interactive plug-in menu. If you need to choose the language again, follow the steps below.

Press the Menu button

π†

√®

To LANGUAGE

To choose a language: ENG. (English),

FRAN. (French) or ESP. (Spanish)

Press the MENU button when finished

PREVIOUS LANGUAGE CLOSED CAPTION AUTO SHUT OFF XDS ID

INITIAL SETUP

ENG. FRAN. ESP.

OFF

SELECT OPERATE EXIT

(3/5)

Initial Setup

Closed Caption

Many broadcasts now include an onscreen display of dialog called closed captions. Some broadcasts may also include displays of additional information in text form. Your television can access and display this information using the closed caption feature. To activate the closed caption feature, follow the steps below. There are three methods. When you are watching analog channels, you can perform Analog Setting of closed caption. When you are watching digital channels, you can perform Digital Auto Setting or Digital Manual Setting.

Analog Setting

Press the MENU button

π†

√®

π†

√®

π†

√®

To CLOSED CAPTION

To enter

To MODE

To select CAPTION or TEXT in MODE

To CAPTION or TEXT

To select a caption (CC1 to CC4) or text

channel (T1 to T4)

Press the OK button to save

Press the MENU button when finished

Digital Auto Setting

Press the MENU button

π†

√®

π†

√®

Auto: Shows closed caption a priority for

Advanced: Shows only the digital closed

Basic: Shows only the analog closed

π†

√®

π†

√® √®

π†

Press the OK button to save

The font/type and color are set automatically.

Press the MENU button when finished

To CLOSED CAPTION

To enter

To Type

To select Auto, Advanced or Basic

digital channels over analog channels. It is set automatically.

caption.

To Service

To select 1, 2, 3, 4, 5 or 6

To Appearance

To enter To select Auto

To Set

CLOSED CAPTION

Back

AUTO

Auto

TEXTMODE

Exit

CAPTION TEXT

PRESS TO FINISH

SELECT OPERATE EXIT

Digital Closed Caption

Preview

Closed Caption Sample

Type

Service

Appearance

Cancel Set

Select

Digital Closed Caption > Appearance

Preview

Closed Caption Sample

Appearance Mode

Font

Colors

Opacities

Cancel Set

Select

Operate

BACK

CC1

Note:

• If you want to cancel the settings, select cancel.

Digital Manual Setting

Press the M

π†

√®

π†

√®

π†

√®

π†

√® √®

π†

√®

π†

√®

To CLOSED CAPTION

To enter

To Type

To select Auto, Advanced or Basic

To Service

To select 1, 2, 3, 4, 5 or 6

To Appearance

To enter To select Manual

To Font

To enter

To select Font Size or Font Style

To select the setting you like Font Size: Auto, Standard, Large or Small Font Style: Auto, Serif Mono, Serif, Sanserif mono,

Sanserif, Casual, Cursive or Small Capital

π†

To Set

Press the OK button to save

π†

√®

π†

√®

To Colors

To enter

To select Text, Edge or Background

To select the setting you like Auto, White, Black, Red, Green, Blue,

Yellow, Magenta or Cyan

π†

To Set

Press the OK button to save

π†

To Opacities

√®

To enter

π†

To select Text/Edge or Background

√®

To select Auto, Transparent, Translucent, Solid

or Flashing

π†

To Set

Press the OK button to save

ENU button

Initial Setup

Digital Closed Caption > Appearance

Preview

Closed Caption Sample

Appearance Mode

Font

Colors

Opacities

Cancel Set

Select

Operate

Digital Closed Caption > Appearance

Preview

Closed Caption Sample

Font Size

Appearance Mode

Font Style

Font

Colors

Opacities

Cancel Set

Select

Operate

Digital Closed Caption > Appearance

Preview

Closed Caption Sample

Text

Appearance Mode

Edge

Font

Background

Colors

Opacities

Cancel Set

Select

Operate

All fonts used for digital closed caption and digital menus are licensed from Monotype Imaging Inc.

Manual

BACK

Back

Standard

Manual

Auto

Cancel Set

BACK

Back

White

Manual

White

Back

Black

Cancel Set

BACK

Exit

Press the MENU button when finished

Notes:

• Closed caption subtitles are usually found on closed caption channel CC1. Some programs may include additional text information which is usually found on text channel T1. The other channels are available for future use.

• Closed captioning may not work correctly if the signal being received is weak or if you are playing a video tape.

• Most broadcasts containing closed captioning will display a notice at the start of the program.

• To select the mode, press the C.C. button. See page 62.

Initial Setup

Auto Shut Off

This function automatically shuts off your TV when there is no signal from the channel the TV is on.

Press the M

π†

To AUTO SHUT OFF

√®

To turn ON or OFF

Press the M

• If the channel that you have on does not receive a

signal for more than one minute, the blinking text “NOT RECEIVING A SIGNAL AUTO SHUT OFF IN 9 MIN.” appears on the screen, and starts the countdown. If no signal is being received within 10 minutes, the TV shuts itself off.

XDS ID

XDS ID Display provides a channel’s call letters, the network’s name, and even a program name. The XDS ID information is provided by the broadcaster.

Press the MENU button

π†

To XDS ID

√®

To turn ON or OFF

Press the MENU button when finished

ENU button

ENU button when finished

PREVIOUS LANGUAGE CLOSED CAPTION AUTO SHUT OFF XDS ID

SELECT OPERATE EXIT

LANGUAGE CLOSED CAPTION AUTO SHUT OFF XDS ID

INITIAL SETUP

ENG. FRAN. ESP.

INITIAL SETUP

ENG. FRAN. ESP.

OFF

(3/5)

OFF

SELECT OPERATE EXIT

Noise Muting

This feature inserts a blank gray screen over channels which are not broadcasting or are too weak to be received clearly.

Press the MENU button

π†

√®

To NOISE MUTING

To turn noise muting ON or OFF

Press the MENU button when finished

Notes:

PREVIOUS NOISE MUTING FRONT PANEL LOCK V1 SMART INPUT VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR

SELECT OPERATE EXIT

INITIAL SETUP

OFF

• Noise muting will not work during auto tuner setup or when you operate channel summary.

• Noise muting will not work when the digital TV is displayed.

(3/5)

(2/5)

Initial Setup

Front Panel Lock

This allows you to lock the keys on the front of the TV, so that a child may not accidentally change your viewing preferences.

Press the M

π†

To FRONT PANEL LOCK

√®

To turn ON or OFF

Press the MENU button when finished

You can turn off this feature in the following ways:

• Unplug the power cord, and plug it back in. Do this if your batteries die, or you lose your remote control.

• Use the remote control.

• Press the M for FRONT PANEL LOCK will appear.

Note:

• To turn ON/OFF the TV, press the power button for more than 3 seconds. This feature will remain ON.

V1 Smart Input

This feature is used if you have connected an AV Receiver to your television. By turning this feature on, your television can automatically detect the signal source from your components that are connected to your AV Receiver.

Press the M

π†

√®

Notes:

• If you do not have an AV Receiver connected to your

• Some AV Receivers may not work with this function.

To V1 SMART INPUT To turn ON or OFF

Press the MENU button when finished

television, turn this feature OFF.

ENU button

PREVIOUS NOISE MUTING FRONT PANEL LOCK V1 SMART INPUT VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR

NEXT PAGE SELECT OPERATE EXIT

ENU button on the front of the TV for more than 3 seconds. In this case, the OSD

ENU button

NOISE MUTING FRONT PANEL LOCK V1 SMART INPUT VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR

NEXT PAGE SELECT OPERATE EXIT

INITIAL SETUP

OFF

INITIAL SETUP

OFF

(2/5)

Initial Setup

Video Input Label

This function is used to label video input connections for the onscreen displays.

Press the M

π†

√®

π†

√®

To VIDEO INPUT LABEL

To enter

To select the desired video input

To select the desired preset input label (see

chart below)

Press the OK button to save

Press the MENU button when finished

ENU button

Preset Labels

VCR

DVD

DVHS

STB

SAT

AMP

GAME

CAM

DISC

PREVIOUS NOISE MUTING FRONT PANEL LOCK V1 SMART INPUT VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR

NEXT PAGE SELECT OPERATE EXIT

VIDEO INPUT LABEL

VIDEO-1 VIDEO-2 VIDEO-3 VIDEO-4 DIGITAL-IN

SELECT OPERATE EXIT

Select when...

You have a VCR connected to the video input

You have a DVD connected to the video input

You have a Digital VCR connected to the video input

You have a Set-top Box connected to the video input

You have a Satellite Receiver connected to the video input

You have an Amplifier connected to the video input

You have a Video Game connected to the video input

You have a Video Camera connected to the video input

You have a Video Disc player connected to the video input

INITIAL SETUP

PRESS TO FINISH

OFF

(2/5)

VCR DVD

SAT

GAME

STB

Initial Setup

Position Adjustment

Position adjustment allows you to adjust the position of the picture on the screen vertically when the aspect is set to panorama, cinema or full.

Press the M

π†

To POSITION ADJUSTMENT

√®

π†

To enter

√®

To adjust the position

ENU button

Press the MENU button to finish

Notes:

OPERATE

RESET EXIT

• To reset the adjustment to the center, press the

K button.

• When the arrow disappears, while you are adjusting the position, the position is at its maximum limit.

• If you select regular size with aspect, position adjustment option is not seen.

• When you change the screen size, perform the position adjustment again.

• Position adjustment allows you to adjust the screen position vertically and horizontally when the aspect is set Panorama Zoom or Cinema Zoom for 1080i and 720p signals.

Power Indicator

Power indicator allows you to adjust the brightness of the power indicator

Press the MENU button

π†

To POWER INDICATOR

√®

To adjust POWER INDICATOR LOW, HIGH

or OFF

Notes :

• If you set a timer on the TV, the power indicator will light even if the TV is on stand by.

PREVIOUS NOISE MUTING FRONT PANEL LOCK V1 SMART INPUT VIDEO INPUT LABEL POSITION ADJUSTMENT POWER INDICATOR

NEXT PAGE SELECT OPERATE EXIT

INITIAL SETUP

OFF

(2/5)

Initial Setup

Digital-In

The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when an HDMI480p picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the position can be adjusted by selecting either SIZE1 or SIZE2.

Press the M

π†

To DIGITAL-IN

√®

To enter

π†

To select AUTO, SIZE1 or SIZE2

Press the M

ENU button

ENU button to finish

DIGITAL-IN DIGITAL-IN AUDIO

SELECT OPERATE EXIT

INITIAL SETUP

AUTO

DIGITAL

(1/5)

Notes:

• The DIGITAL-IN menu can only be displayed when a HDMI or 480p picture signal is input to the Digital-In terminal and the picture is being displayed on the screen.

• You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the televison will select "SIZE1" or "SIZE2" automatically.

Digital-In Audio

This feature is used if you have a DTV or HDMI compatible component connected to your TV.

Press the MENU button

π†

To DIGITAL-IN AUDIO

√®

To select ANALOG, DIGITAL or AUTO

PREVIOUS DIGITAL-IN DIGITAL-IN AUDIO

Press the Menu button when ﬁ nished

Notes:

• If your DTV or HDMI component is capable of digital

SELECT OPERATE EXIT

audio and video, choose DIGITAL. If your DTV or HDMI component is capable of analog audio and digital video, choose ANALOG.

• Refer to your DTV or HDMI component’s instruction manual for more information.

• When you select AUTO, the television will select "ANALOG" or "DIGITAL" automatically, depending on the audio input from the HDMI.

• When you select DIGITAL, select PCM on Digital Sound in the Digital Setup menu. See page

68.

INITIAL SETUP

AUTO

DIGITAL

(1/5)

Picture Adjust

Picture Settings

These settings allow you to change and adjust the way the picture appears on your television.

TINT

Tint allows you to adjust the levels of red and green in your TV picture.

COLOR

The color function lets you make all the colors in the TV picture appear either more vivid or subtle.

PICTURE

Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker or brighter picture overall.

BRIGHT

You can adjust the overall brightness of the TV picture with the Bright control.

DETAIL

The Detail feature adjusts the level of fine detail displayed in the picture.

Adjust the Picture Settings

Press the MENU button

π† To TINT, COLOR, PICTURE, BRIGHT or

DETAIL

√ ®

To enter

TINT

√ ®

To adjust the setting

π†

To move to the next setting

+02

PICTURE ADJUST

PREVIOUS TINT COLOR PICTURE BRIGHT DETAIL COLOR TEMPERATURE

NEXT PAGE SELECT OPERATE

00 00 00 00 00

STANDARD

Press the MENU button when finished

Color Temperature

You can decide how strong or dull the colors appear on the TV screen.

Press the M

π†

To COLOR TEMPERATURE

√®

To enter

COLOR TEMPERATURE LOW HIGH

√®

To set LOW or HIGH

Press the MENU button when finished

ENU button

PICTURE ADJUST

PREVIOUS TINT COLOR PICTURE BRIGHT DETAIL COLOR TEMPERATURE

NEXT PAGE SELECT OPERATE

00 00 00 00 00

STANDARD

Digital Noise Clear

With digital noise clear, this helps take our static or noise from a channel that may not be coming in clearly.

Press the M

π†

To DIG. NOISE CLEAR

√®

To enter

π†

To select the mode LOW, HIGH or OFF

Press the MENU button when finished

ENU button

DIG. NOISE CLEAR

HIGH

(1/2)

EXIT

(1/2)

EXIT

OFF

LOW

HIGH

Picture Adjust

Natural Cinema

Natural cinema corrects the problem of blurred edges which may occur when viewing a program originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges of these programs, press N conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the television rate of 30 frames-per-second.

Press the NATURAL CINEMA button

π†

To NATURAL CINEMA

√®

To enter

π†

To select the mode “AUTO", "ON" or "OFF”

Press the MENU button when finished

Notes: The natural cinema mode is automatically set to “AUTO” in the following cases:

• Turning on or off

• Changing the channel or input mode

(VSM) Velocity Scan Modulation

Velocity scan modulation circuitry varies the electron beam’s horizontal scanning speed to help accentuate the differences in picture brightness to sharpen the edges of images.

Press the M

π†

√®

To VSM

To enter

VSM ON OFF

To turn VSM ON or OFF

ATURAL CINEMA and set it to AUTO. Natural Cinema helps correct

NATURAL CINEMA

ENU button

PICTURE ADJUST

PREVIOUS STANDARD DIG. NOISE CLEAR NATURAL CINEMA VSM

RESET

NEXT PAGE SELECT OPERATE EXIT

AUTO

OFF

ON ON

OFF

(2/2)

Reset

Reset resets all picture adjustments (tint, color, picture, bright, detail, color temperature et dig. noise clear) at once to the default settings.

Press the M

π†

To RESET

√®

To enter

The onscreen menu disappears for a moment,

ENU button

PICTURE ADJUST

PREVIOUS STANDARD DIG. NOISE CLEAR NATURAL CINEMA VSM

OFF

ON ON

and then the settings are reset to the default setting for all the picture adjustments.

Press the MENU button when finished

RESET

NEXT PAGE SELECT OPERATE EXIT

(2/2)

Sound Adjust

Sound Settings

These settings allow you to change and adjust the sound on your television.

You can increase or decrease the level of low-frequency sound in the TV’s audio with

BASS –

TREBLE –

BALANCE –

Adjust the Sound Settings

Press the MENU button

π† To BASS, TREBLE or BALANCE

√ ®

π†

Press the MENU button when finished

Note:

• You can reset the sound adjustments (BASS, TREBLE and BALANCE) you set at once as

• You can adjust BALANCE only when HYPER SURROUND. is off. See page 59.

the bass adjustment.

Use treble to adjust the level of high-frequency sound in your TV’s audio.

Adjust the level of sound between the TV’s left and right speakers with the

balance setting.

To adjust the setting

To move to the next setting

the default setting when you select reset. See page 54.

SOUND ADJUST

PREVIOUS BASS TREBLE BALANCE

RESET

NEXT PAGE SELECT OPERATE EXIT

00 00 00

Reset

Reset resets all Sound Adjustments (Bass, Treble and Balance) at once to the default settings. See page 54 on how to use reset.

Clock/Timers

Set Clock

The set clock function is described on page 24 as the interactive plug-in menu. You can choose to set the clock automatically or manually. If you need to set the clock again, follow the steps below.

Press the M

π†

To SET CLOCK

√®

To enter

When you set the clock automatically, choose AUTO by pressing the √ or ® arrows.

π†

√®

π†

√®

To TIME ZONE

To select your time zone

ATLANTIC

To D.S.T. (daylight savings time)

To turn D.S.T. ON or OFF

Press OK to finish

Press the MENU button when finished

When you set the clock manually, choose MANUAL by pressing the √ or ® arrows.

π†

√®

π†

√®

π†

√®

To move to the hours

To set the hours

To move to minutes

To set the minutes

To TIME ZONE

To select your time zone:

(Atlantic, Eastern, Central, Mountain, Pacific,

Alaska or Hawaii)

π†

To D.S.T. (daylight savings time)

√®

To turn D.S.T. ON or OFF

Press OK to start clock

THANK YOU !!

Press the MENU button when finished

ENU button

EASTERN

HAWAII

ALASKA

CENTRAL

PACIFIC

MOUNTAIN

SET CLOCK

MODE

TIME

TIME ZONE D.S.T.

PRESS TO FINISH

SELECT OPERATE EXIT

SET CLOCK

MODE TIME TIME ZONE D.S.T.

PRESS TO START CLOCK

SELECT OPERATE EXIT

AUTO

: --

ATLANTIC

MANUAL

: --

ATLANTIC

Notes:

• D.S.T. can be used when it is set to ON in the SET CLOCK menu.

• Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in October.

• You will have to reset the clock after a power interruption. You must set the clock before operating any timer functions.

Clock/Timers

On/Off Timer

The on/off timer lets you program your television to turn itself on or off. You can use it as an alarm to wake up, to help you remember important programs, or as a decoy when you’re not home.

Press the M

π†

√® √®

To ON/OFF TIMER

To enter (begins with ON TIME)

To set the hour (AM/PM) you want the TV to

turn on

†

To move to minutes

√®

To set the minutes

†

To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the

OFF TIME the same way as ON TIME

†

To accept OFF TIME and move to CHANNEL

√®

To select channel

†

To ON VOLUME

√®

To set the volume level

†

To move to MODE

√®

Choose ONCE or EVERYDAY

†

To ON/OFF TIMER

√®

Choose YES to accept the timer setting, choose NO if you don’t wish to accept

Press the OK button to finish

Press the MENU button to exit the menu

ENU button

ON/OFF TIMER ON TIME OFF TIME CHANNEL ON VOLUME MODE ON/OFF TIMER

SELECT OPERATE EXIT

PRESS TO FINISH

7:00 PM

10:00 PM

CURRENT

EVERYDAY

Notes:

• The on/off time cannot be set to locked or guarded channels.

• In order for the on/off timer to work, the clock must be set.

• After a power interruption, the timer settings must be reset.

Button Functions

Power

Turns the TV on or off.

Press the P

Number Buttons - 10Key Pad

Use the number buttons on the remote control to move directly to a specific channel. For example, to move to channel 12:

0 (Zero)

1 (One)

2 (Two)

Tune

OWER button

Lets you decide the input channel and select it. After you press the number buttons on the remote, press the T

1 (One)

2 (Two)

Press the TUNE button

UNE button. For example, to move to channel 12:

Input

Selects the signal input source for the television: Input-1, 2, 3, 4 or DIGIATL-IN for video devices like VCRs, DVD players, or camcorders.

Press the INPUT button

By every press of the I

Notes:

• When you return to TV mode, press the RETURN + button or direct 10 key pad.

• You can also access the FRONT CONTROL PANEL screen by using the MENU button on the front of the TV instead of the remote control. It appears between INITIAL SETUP and PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose INPUT by pressing MENU† on the front panel and choose a mode by using the CHANNEL +/buttons ( √ OPERATE ® ).

NPUT button, you can change the input mode.

Channel +/–

Use these buttons to move up or down all the available channels your TV is able to receive.

Volume +/–

Use these buttons to raise or lower the TV’s volume level.

Button Functions

Return +/TV

The RETURN+/TV button has three functions:

Return - Returns to the channel viewed just before the channel currently onscreen.

Return+ - Lets you program a specific channel to return to while scanning through the

TV - Returns to the TV mode.

Press the R

channels using the CH+ and CH– buttons.

ETURN+/TV and hold for three seconds

RETURN CHANNEL

PROGRAMMED!

The channel currently active has been programmed as your return+ channel. Now scan

through the channels using the CHANNEL+/– buttons.

Press the RETURN+/TV

You will return to your programmed channel.

• To cancel your return+ channel, press and hold the RETURN+ button for three seconds. The message “RETURN CHANNEL CANCELLED!” will appear.

• Return+ works only with the Channel+/– buttons. Pressing any number key will cancel

return+.

Sound

By pressing the SOUND button, you can change the Hyper Surround mode and SMART SOUND on or off.

HYPER SURROUND - Creates a deep, three-dimensional sound effect by channeling the audio through the TV’s front-firing speakers..

SMART SOUND - Decreases high sound levels, giving a regulated sound level.

Press the SOUND button

π†

√®

Press the M

To select HYPER SURROUND or SMART SOUND

To choose the setting

ENU when finished

Note: Smart Sound may become an unnatural effect, depending on the signal source.

SOUND EFFECT

HYPER SURROUND SMART SOUND

OPERATE EXIT

SELECT

ON OFF ON OFF

Button Functions

Video Status

The VIDEO STATUS button gives you a choice of four TV picture display settings, including a display of your own preferences.

Standard - Resets the picture display to the factory settings.

Dynamic - Gives a vivid picture with better contrast when viewing in

Theater - Gives a rich, film-like look to video when viewing in a

Game - Used for when you are playing video games connected to

Press the V By every press of the VIDEO STATU S button, you change the mode.

Note:

• You can also change the mode by pressing the

• You can also access the FRONT CONTROL PANEL screen by using the MENU button on the side of the TV instead of the remote control. It appears between INITIAL SETUP and PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose VIDEO STATUS by pressing MENU† on the side panel and choose a mode by using the CHANNEL +/- buttons ( √ OPERATE ® ).

a brightly lit room.

dimly lit room.

your TV.

IDEO STATUS button

π†

buttons.

TheaterPro D6500K

The TheaterPro D6500K color temperature technology function makes sure that the video you watch is set to the standard color temperature, so that what you see is as true to what the film to video editors intended it to be.

VIDEO STATUS

STANDARD

DYNAMIC THEATER

GAME

Press the THEATERPRO button

Button Functions

Sleep Timer

The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals of 15 minutes, for a total time of up to 180 minutes.

Press the S

LEEP button

0 15 30 45 60 75 90 105 120 135 150 165 180

Sleep Timer Message

60 seconds before the automatic shutoff, this message will appear:

GOOD NIGHT!!

PUSH SLEEP TIMER BUTTON

You then have 60 seconds to press the S

delay the shut off for another 15 minutes.

TO EXTEND

LEEP button to

ML/MTS

MTS technology allows several audio signals to be broadcast in analog at once, giving you a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast may also include a second audio program (SAP).

Press the ML/MTS button

By every press of the ML/MTS button, you change

the mode

ON AIR

MTS

STEREO

SAP

MONO

Notes:

• When you are receiving a digital broadcast, if there are other languages, you can change the language by pressing the M

• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo mode even if a certain broadcast is in mono sound only.

• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.

• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.

• MTS unavailable if your television’s Input source is in input 1, 2, 3 or 4 mode, as described on page 58.

• ML/MTS will not work when you are using the Digital-In and VIDEO 1 to 4.

• You can also change the mode by pressing the

L/MTS button.

π†

buttons.

Muting

The MUTING button instantly turns the volume down completely when you press it. Press MUTING and the volume level will instantly go to zero. To restore the volume to its previous level, press MUTING again.

Button Functions

Display

The display screen shows the current status of timers, inputs and XDS ID.

Press the D

ISPLAY button

The screen to the right shows the following information:

•

The current channel or AV input (Channel 05)

• The current time (12:20 pm)

• Sleep timer status/minutes remaining (The Sleep Timer is off)

• On/off timer status (Set to turn on everyday at 7:00 PM, off at 10:00 PM)

• Each Press of the D

ISPLAY button changes the

05 KLVX PBS JAZZ FESTIVAL NOW SLEEP TIMER ON/OFF TIMER ON TIME OFF TIME

display mode:

Display Time Channel Off

Display - Full screen shown above

Time - Shows the current time only

Channel - Shows the current channel

Off - Turns display off

Notes:

• You may also turn off the display at any step by pressing M

ENU.

• If the clock, sleep timer or on/off timer are not set, the display screen will show: “CLOCK NOT SET”, “SLEEP TIMER OFF”, and “ON/OFF TIMER OFF” respectively.

C.C. (Closed Caption)

Use the C.C. (Closed Caption) button to select the mode of closed caption.

Press the C.C. button

Notes:

• SMART CAPTION will appear when you press the MUTING button, only on channels where the broadcast contains closed captioning.

• When you select ON, it will be the mode selected in the Closed Caption Menu.

• See page 46 when you set the caption/text mode.

π†

• You can also change the mode by pressing the

buttons.

CLOSED CAPTION

SMART CAPTION

12:20 PM

OFF

EVERYDAY

7:00 PM

10:00 PM

OFF

Button Functions

Favorite

The Favorite button allows you to select your favorite channels easily. First, you must register the channels that you like. See how to register below.

Press the F

π†

To select the channel you want to watch

Press the OK button

Press the channel number you want to register

Press the F

Notes:

• Both analog and digital channels can be registered. The digital channels have a "D" in front of the channel number.

• The maximum number of channels you can register is 24.

• If you have registered the maximum number of channels, and try to register more channels, the oldest channel you registered will be deleted.

• Sub channels can not be registered.

• The newest channel you registered will appear at the top of the list.

• Regarding digital channels, see page 69 - 70.

AVORITE button

The favorite channel list will appear.

It will change to the channel you have selected.

The channel program will change.

AVORITE button for three seconds

The channel will be registered in the favorite channel list.

D103

D107

101 102

FAVORITE

CBS FOX

PBS2

HBO

ABC

Delete the favorite channel

Press the FAVORITE button

π†

√®

To enter

Press the OK button

Press the FAVORITE button when finished

Note:

• Before pressing the FAVORITE button when you are finished, press the √® button again, and

you can return to the deleted channel.

The favorite channel list will appear.

To select the channel you want to delete

The channel was deleted.

Button Functions

Aspect

This feature will help you adjust the picture you are watching to give you the best possible picture quality.

Aspect Ratios

PANORAMA - With this ratio a normal

4:3 aspect picture is stretched to fit the dimensions of the 16:9 aspect screen.

CINEMA - This ratio “zooms in” on the center part of a 4:3 aspect picture, blowing it up to fill the 16:9 screen.

FULL - This is the ratio to use when watching 16:9 High-Definition broadcasts.

PANORAMA ZOOM - This ratio stretches the High-Definition 16:9 aspect image to eliminate the black side bars.

REGULAR - The regular ratio is used when you want to watch a 4:3 broadcast or recorded program without modifying the original picture to fit the dimensions of your 16:9 screen. The 4:3 picture will fill the screen from top to bottom, while gray bars will appear to fill up the remaining space along the picture’s sides. The 4:3 picture will be centered within the boundaries of the 16:9 screen.

SLIM - This aspect mode shrinks the screen of 16:9 to 4:3. There are some programming that is already stretched by mistake at broadcasting companies, so this mode corrects it. Gray side bars will appear.

CINEMA ZOOM - This ratio stretches the High-Definition 16:9 aspect image to eliminate the black surrounding bars.

Button Functions

Aspect Ratios (Continued)

Press the ASPECT button

• By pressing the A

When you change the aspect ratios, it is different from their broadcast or recorded program.

SPECT button, you can change the size.

NTSC, 480i, 480p

ASPECT

PANORAMA

CINEMA

FULL

REGULAR

Notes:

• You can also choose the size by pressing the

• When you change the aspect ratio or signal, reset the picture position to center.

• You can also access the FRONT CONTROL PANEL screen by using the M the front of the TV instead of the remote control. It appears between INITIAL SETUP and PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose ASPECT by pressing MENU† on the front panel and choose a mode by using the CHANNEL +/- buttons ( √ OPERATE ® ).

• "SLIM" can only be dispalyed when the signal is ATSC (480i or 480p).

• If the televison receives a 16:9 signal from your HDMI device, the aspect mode will turn to FULL automatically. If the television receives a 4:3 signal from your HDMI device when you are in FULL aspect mode, it will return to REGULAR aspect mode. If you change the aspect mode after the televison changed it to FULL automatically, the televison will change to the aspect mode you choosed.

HD (1080i, 720p)

ATSC (1080i, 720p)

ASPECT

PANORAMA ZOOM

CINEMA ZOOM

FULL

π† buttons.

ATSC (480i, 480p)

ASPECT

PANORAMA ZOOM

CINEMA ZOOM

FULL SLIM

ENU button on

The MENU button allows you to access JVC’s onscreen menu system. Press MENU to activate the onscreen menu system.

• See individual topics like “Sound Adjust” for specific information on using menus.

This button confirms your selection when you are in one of the onscreen menus.

Back

This button allows you to go back in the menu to change a selection or correct a mistake.

Button Functions

TV/CATV Slide Switch

Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to operate the television’s built-in tuner. Move the switch to CATV to operate a cable box.

Note:

• See page 26 for information on programming your remote for cable box operation.

VCR/DVD Slide Switch

You can control a VCR or DVD player with the buttons on the lower part of the remote control. Move the slide switch to VCR or DVD to operate.

Notes:

• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other manufacturer’s brand VCR, please see the code chart and instructions on page 27.

• The remote is preset with the code 000 to control JVC-brand DVD players. For any other manufacturer’s brand DVD player, please see the code chart and instructions on page 28.

VCR Buttons

You can use this remote control to operate the basic functions of your VCR. These functions include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and power off.

Move the selector switch to VCR to operate.

• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other manufacturer’s brand VCR, please see the code chart and instructions on page 27.

DVD Buttons

You can also use this remote control to operate the basic functions of your DVD player. These functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close, power on, and power off.

Move the selector switch to DVD to operate.

• The remote is preset with the code 000 to control JVC-brand DVD players. For any other manufacturer’s brand DVD player, please see the code chart and instructions on page 28.

Super Focus

This button is only located on the front panel of your TV. When you press the SUPER FOCUS button on the front of the TV, you can access the auto convergence mode in the convergence menu screen automatically. See page 43.

Digital Setup

Use this function when you are receiving a digital broadcast.

Press the M

π†

√®

To DIGITAL SETUP

To enter

The onscreen will appear

Notes:

• Software Update will only appear when the SD Card is inserted.

• If you are watching an analog channel, you can still access the digital setup menu at anytime, while you are doing this, the background screen will turn blank. In this case, the tuner will switch to digital, since you are accessing the digital setup menu.

Antenna Level

Confirms the present antenna level.

Press the MENU button

π†

√®

π†

√®

To DIGITAL SETUP

To enter

To Antenna Level

To enter

ENU button

Digital Setup

Antenna Level

Digital Sound

Software Version

Software Update

Select

BACK

Back

BACK

Back

Operate

Antenna Level

Exit

PCM

Exit

Digital Setup

Digital Sound

You can select the optical digital sound output, either PCM or Dolby Digital when your TV is connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can enjoy listening in 5.1ch sound when watching digital broadcasts.

Press the M

π†

√®

π†

√®

Notes:

• If your amplifier does not have Dolby Digital decoder, select PCM. If you don't select PCM, it

• For connecting an amplifier using the optical output, see page 19.

To DIGITAL SETUP

To enter

To Digital Sound

To select PCM or DOLBY DIGITAL

Press the MENU button when finished

cannot output the sound from the speakers.

ENU button

Manufactured under license from Dolby Laboratories. "Dolby", and the double-D symbol are trademarks of Dolby Laboratories.

Software Version

You can confirm the Software Version.

Press the MENU button

π†

√®

π†

√® √®

Press the MENU button when finished

To DIGITAL SETUP

To enter

To Software Version

To enter

Select close when you are finished confirming your software version

Software Update

At first, insert the SD(Multi-media) card into the memory card slot. This function will appear only when you insert an SD Card.

Press the MENU button

π†

To DIGITAL SETUP

√®

To enter

π†

To Software Update

√®

To enter

π†

Checks the card if it needs an update or not

Press the MENU button when finished

Digital Button Functions

Digital CH D/A (Digital/Analog)

The D/A button changes the analog and digital channel. Each time you press the D/A button, you can switch back and forth the analog and digital channels. Digital channels have a "D" in front of the channel number.

Press the D/A button

To watch digital channels

For example, to move to channel D23:

Press 2 (Two)

Press 3 (Three)

Press the TUNE button

Sub Channel

The main channel sometimes has minor channels (Sub Channels). By using the SUB CH button, you can select a sub channel easily.

For example, to move to sub channel 123-45:

Press 1 (One)

Press 2 (Two)

Press 3 (Three)

Press the SUB CH button

Press 4 (Four)

Press 5 (Five)

Press the TUNE button

Note:

• If there are more than 2 major channels, select the digital channel by using the π† buttons

and then press the OK button.

Guide

You can view the program from the GUIDE.

Notes:

• The GUIDE function will only work when you are receiving digital programming only.

• The GUIDE will not show the correct time and date if you have not performed the set clock function on your television. See page 56.

OSD Information

Weak Signal

This OSD warning appears when the digital channel that you have selected is too weak to receive or no signal is being detected for that channel.

Weak Signal

No Program

If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM" appears on the television screen. It appears when that channel is not receiving a signal and you have the Noise Muting function OFF and you have a single screen. It moves automatically every two seconds to prevent the screen from burn-in. See page 6.

Note:

• Even if "NO PROGRAM" appears on the screen, your timer functions and auto shut off functions that you set, are still active.

Troubleshooting

PROBLEMS CHECK

There is no power

There is no picture or sound

• See if the power cord became unplugged.

• Check for a blown fuse or circuit breaker or a power outage.

• The antenna could be disconnected.

• The input mode could be set improperly. See page 50.

• The tuner (Auto Tuner Setup) could be set improperly. See page 33.

• The TV station may be having difficulties. Check to see if other stations are working.

Remote control is not operating properly or at all

You cannot select a certain channel

The power turns off by itself

The clock is wrong

The color quality is poor

There are lines across the picture

The picture is spotted

There are double pictures (ghosts)

Picture is snowy (image noise)

Screen is 40% black

Stereo or bilingual programs can't be heard

• Check to see that the batteries are still working and properly installed.

• Make sure the remote has a clear sight path to the TV.

• Check that the TV/CATV switch is in the proper position.

• You may be too far from the TV. You must be within 23 feet (7 meters).

• Make sure the channels have been programmed. See "Channel Summary", page 34.

• Check to see if the channel is locked. See "Channel Summary - Lock" page 35.

• Make sure the set did not become unplugged.

• Perhaps the On/Off Timer is set. See page 57.

• Check to see if the Sleep Timer was set. See page 61.

• The power was interrupted and the clock was not reset. See page 56.

• Tint and Color may be improperly adjusted. See page 53.

• The Video Status mode may be turned to the wrong setting. See page 67.

• There could be interference from another electrical appliance, such as a computer, another TV or VCR. Move any such appliances further away from the TV.

• There could be interference from a high-wattage appliance, like a hairdryer or vacuum, operating nearby. Move the antenna away from the appliance or change to a coaxial cable connection which is less prone to interference.

• A building or passing airplane can reflect the original signal and produce a second, slightly delayed one. Adjust your antenna position.

• Your antenna may be damaged, disconnected or turned. Check the antenna connection. If the antenna is damaged, replace it.

• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 46.

• Make sure the MTS settings are correct. See page 61.

Static electricity

You hear occasional crackling sounds

The square appears and blinking

It does not operate correctly

• It is normal to feel static electricity if you brush or touch the screen.

• It is normal for the TV to make crackling sounds when first turned on or off. Unless the sound or picture become abnormal, this is fine.

• It appears when you are operating the Auto Convergence. If not, then this may be a problem with the Auto Convergence. Contact a service agent.

• Press the CHANNEL- and VOLUME- buttons on the front panel of the TV simultaneously for a few seconds. The Digital Tuner will be reset. If this does not reset it correctly, unplug the power cord and plug it back in.

727374

Specifications

Model

Reception Format

Reception Range

Power Source

Power Consumption

Screen Size

Speakers 13 cm round X 2

Audio Output Full Range - 10W + 10W

Antenna Terminal

(VHF/UHF,

ATSC/DIGITAL

CABLE IN)

External Input Jacks

Component Input

Jack

S-Video Input Jacks

Audio Output Jacks

(FIX)

Optical Output

Digital Audio

Digital–In

Dimensions (inch)

W X H X D (cm)

Weight (lbs / kg)

Accessories

AV-48P776 AV-48P786

Rear Projection TelevisionType

NTSC, BTSC System (Multi-Channel Sound)

ATSC Terrestrial, Digital Cable

VHF 2 to 13, UHF 14 to 69 CATV 125 Sub, Mid, Super, Hyper and Ultra bands (181 channel frequency synthesizer system)

• Reception of channel A-5 ("95" of the TV set's on-screen cable channel numbers) is not recommended for your TV set.

AC 120V, 60 Hz

259W

48 inch /

122 cm

measured diagonally,

16:9 ratio

75 ohms (VHF/UHF)(F-type connector)

Video: 1 Vp-p, 75 ohms

Audio: 500 mVrms (-4dBs) high impedance

Y: 1Vp-p positive, 75 ohms (negative sync provided)

500mVrms (-4dBs) Low impedance (1000 Hz when modulated 100%)

HDMI jack x 1 Note: The Digital–In terminal is not compatible with picture signals of a personal computer

47 1/4 x 48 7/6 x 24 1/2

120 x 116.9 x 82.2

170 / 77

Pb/Pr: 0.7 Vp-p 75 ohms

C: 0.286 Vp-p (burst signal), 75 ohms

Digital Out (optical) x 1

remote control unit x 1 / AA batteries X 2

AV-56P776 AV-56P786

56 inch /

142 cm

measured diagonally,

16:9 ratio

56 7/8 x 51 1/8 x 28 3/8

136.6 x 129.6 x 66.7

184 / 83.5

Specifications subject to change without notice.

Note:

• The open source software is embedded in this product. For more information, please go to: http://software.jvc.com/opensource/lnx/DP/05_AtscQuam/download.html

Notes

JVC COMPANY OF AMERICA

Division of JVC Americas Corp.

1700 Valley Road

Wayne, New Jersey, 07470

JVC CANADA, INC.

21 Finchdene Square Scarborough, Ontario

Canada, M1X 1A7

JVC LCT1885-001A-A, AV-56P786, AV-48P786, 0705JGI-II-IM User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual