JVC AV32S2EI, InteriArt AV32S2EI Instructions Manual

Download

AV28S2EI/AV32S2EI

6SHFLILFDWLRQV

6SHFLILFDWLRQV6SHFLILFDWLRQV

6SHFLILFDWLRQV

* A basic model number. The actual model number may have characters added (such as “S” for silver) showing the

colour of the TV set.

We may change the design and specifications without notice.

Pictures displayed on the screen using this TV’s ZOOM fun ctions sh ould not be s hown for any co mmercia l or demonst ration purpose in public places (cafes, hotels, etc.) without the consent of the owners of copyright of the original picture sources, as this would be an infringement of copyright.

Model

Item

AV28S2EI*

AV32S2EI

Broadcasting systems CCIR I Colour systems PAL

•

The EXT terminals also support the NTSC 3.58/4.43 MHz system. Channels and frequencies IR A-J, E2-E12, E21-E69, S1-S41, X, Y, Z, Z+1, Z+2, ITALY A-H, ITALY H+1, ITALY H+2 Sound-multiplex systems NICAM (I) system Teletext systems FLOF (Fastext), WST (World Standard Text) Power requirements 220 - 240 V AC, 50 Hz Power consumption Maximum: 168 W, Average: 115 W,

Standby: 0.8 W

Maximum: 172 W, Average: 121 W,

Standby: 0.8 W Picture tube size Viewable area 66 cm (measured diagonally) Viewable area 76 cm (measured diagonally) Audio output Rated Power output: 7.5 W + 7.5 W Speakers (20 cm

4 cm) oval × 2

EXT-1 terminal Euroconnector (21-pin, SCART)

•

Video input, Audio L/R inputs and RGB inputs are available.

•

TV broadcast outputs (Video and Audio L/R) are available.

EXT-2 terminal Euroconnector (21-pin, SCART)

•

Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

•

Video and Audio L/R outputs are available.

•

T-V LINK functions are available.

EXT-3 terminal Euroconnector (21-pin, SCART)

•

Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

EXT-4 terminal RCA connectors

S-VIDEO connector

•

Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

AUDIO OUT terminal RCA connectors

•

Variable audio L/R outputs are available.

•

Variable out 0-1 Vrms, low impedance Headphone jack Stereo mini-jack (3.5 mm in diameter) Dimensions (W

H × D) 800 mm × 500 mm × 498 mm 901 mm × 556 mm × 557 mm Weight 41 kg 57.4 kg Accessories Remote control unit RM-C55 × 1

AAA/R03 dry cell battery

LCT0896-001A-U 1200-T-CR-JMUK

AV28S2EI AV32S2EI

Contents

Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Setting up your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

T-V LINK functions. . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Using your TV–the basics . . . . . . . . . . . . . . . . . . . . . 8

Remote control buttons and functions

. . . . . . . . . . . . 11

Using the TV’s menus . . . . . . . . . . . . . . . . . . . . . . . 16

Picture setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Picture features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Sound setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

EXT SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

INSTALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

DEMO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Other menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Further preparation . . . . . . . . . . . . . . . . . . . . . . . . . 32

TV buttons and parts . . . . . . . . . . . . . . . . . . . . . . . . 34

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Specifications. . . . . . . . . . . . . . . . . . . . . . .Bac k Cover

Colour Television

INSTRUCTIONS

AV28S2EI_cover.fm Page 1 Friday, December 22, 2000 4:02 PM

Thank you for buying this colour television. To make sure you fully understand how to use your new TV, please read this manual thoroughly before you begin.

6DIHW\#SUHFDXWLRQV

6DIHW\#SUHFDXWLRQV6DIHW\#SUHFDXWLRQV

■■■■

:DUQLQJ

:DUQLQJ:DUQLQJ

To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

■■■■

&DXWLRQ

&DXWLRQ&DXWLRQ

To ensure personal safety, observe the following rules regarding the use of this unit.

1 Operate only from the power source specified (AC 220 –

240 V, 50 Hz) on the unit. 2 Avoid damaging the AC plug and power cord. 3 Avoid improper installation and never position the unit

where good ventilation is unattainable.

When installing this television, distance recommendations

must be maintained between the floor and wall, as well as

instalment in a tightly enclosed area or piece of furniture.

Please adhere to the minimum distance guidelines shown

for safe operation.

15 cm

10 cm 10 cm 15 cm

4 Do not allow objects or liquid into the cabinet openings. 5 In the event of a fault, unplug the unit and call a service

technician. Do not attempt to repair it yourself or remove

the rear cover. 6 The surface of the TV screen is easily damaged. Be very

careful with it when handling the TV.

Should the TV screen beco me soiled, w ipe it with a soft dry

cloth. Never rub it forcefully. Never use any cleaner or

detergent on it. 7 When you don’t use this TV set for a l ong period of ti me, be

sure to disconnect the power plug from the AC outlet.

■■■■

:DUQLQJ

:DUQLQJ:DUQLQJ

DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer.

If nonetheless th e mains plug is cut off, re mo ve the fus e and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

If a new mains plug has to be fitted, then follow the instruction given below:

Important

Do not make any connection to the larger terminal which is

marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow.

The wires in the mains lead on this product are coloured in accordance with the following code: Blue: Neutral Brown: Live

As these colours may not correspond with the coloured marking identifying the terminals in your plug proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

When replacing the fuse only a corre ctly rated approve d type should be used and be sure to re-fit the fuse cover.

If in doubt — consult a competent electrician.

How to replace the fuse

Open the fuse compartment with a blade screwdriver, and replace the fuse.

Fuse

■■■■

*XLGHOLQHV#IRU#VDIH#RSHUDWLRQ

*XLGHOLQHV#IRU#VDIH#RSHUDWLRQ*XLGHOLQHV#IRU#VDIH#RSHUDWLRQ

This equipment has been designed and manufactured to comply with international safety standards. However, as with any electrical appliance, care must be taken to ensure optimal results and operational safety.

• Before attempting to use this equipment, read the operating instructions thoroughly.

• Ensure that all elec trical conn ections ( inclu ding the mai ns plug, extensio n lead s, etc.) ha ve been mad e in a ccordance w ith the

manufacturer’s instru cti ons .

• If ever in doubt about the installation, operation or safety of this equipment, consult your dealer.

• Handle all glass panels or covers with care.

• Never operate this equipment if it appears damaged or operates abnormally. Turn the power off, disconnect the main power

plug and consult your dealer.

• Never remove any affixed panels or covers. Doing so may result in electrical shock.

• Never leave this equi pment op erating unattende d unless otherwise specifi cally s tated that it is des igned to do so or i n standb y

mode. Only use the des ignate d pow er switc h to turn o ff the po wer an d ensu re that al l poten tial us ers are i nstruc ted how to do so. Make special arrangements for infirm or handicapped persons.

• Never watch TV while operating a motor vehicle. It is illegal to watch TV while driving.

• Never listen to headphones at high volume. Doing so may damage your hearing.

• Never obstruct the ventilation of this equipment. Doing so may cause overheating and result in a malfunction or damage.

• Never use makeshift stands or attempt to affix legs with wood screws. When using a manufacturer’s approved stand or legs,

use only the fixtures provided and follow the installation instructions.

• Never allow this equipment to be exposed to rain or moisture.

• Never allow anyone, es pecially children , to insert a nything in to an openi ng in the c ase. Doing s o may res ult in a fata l electr ical

shock.

• Never guess or take chances with electrical equipment of any kind. It is better to be safe than sorry.

6HWWLQJ#XS#\RXU#79

AUDIO OUT

EXT-1

EXT-2

EXT-3

AUDIO OUT

EXT-1

EXT-2

EXT-3

E X T 4

Aerial

75-ohm coaxial

cable

aerial plug

Mains outlet

(AC 220 - 240 V,

50 Hz)

21-pin SCART Cable

aerial

plug

75-ohm

coaxial

cable

aerial plug

AV IN/OUT

terminal

to aerial

output

To Aerial

Input

power

Cord

6HWWLQJ#XS#\RXU#79

6HWWLQJ#XS#\RXU#796HWWLQJ#XS#\RXU#79

■■■■

&RQQHFWLQJ#WKH#DHULDO#DQG#YLGHR#FDVVHWWH#UHFRUGHU#+9&5,

&RQQHFWLQJ#WKH#DHULDO#DQG#YLGHR#FDVVHWWH#UHFRUGHU#+9&5,&RQQHFWLQJ#WKH#DHULDO#DQG#YLGHR#FDVVHWWH#UHFRUGHU#+9&5,

If you are connec ting a VC R, fol low A → B → C → D in the diagram opposite. If you are not connecting a VCR, follow 1 → 2.

• For more details, see the manuals that came with the

equipment you want to connect.

• The connecting cables are not provided.

• You can watch a video using the VCR without doing C.

For details, see your VCR instruction manual.

• To connect more equipment, please see “Further

preparation” on page 32.

• To connect external speakers and an audio system,

please see “Connecting speakers or an amplifier” on

page 33.

• If you connect a decoder to a T-V LINK compatible VCR,

set the DECODER (EXT-2) function to ON. For details, see

“Using the DECODER (EXT-2) function” on page 30.

Otherwise, you will not be able to watch scrambled

channels.

To use the T-V LINK functions, you must have a T-V LINK compatible VCR connected by a SCART cable C to the EXT-2

terminal on the TV. For details about T-V LINK

functions, see “T-V LINK functions” on page7.

■■■■

3XWWLQJ#EDWWHULHV#LQWR#WKH#UHPRWH#FRQWURO

3XWWLQJ#EDWWHULHV#LQWR#WKH#UHPRWH#FRQWURO3XWWLQJ#EDWWHULHV#LQWR#WKH#UHPRWH#FRQWURO

Use two AAA/R03 dry cell batteries. Insert the batteries holding from the ó end, making sure the

ô and ó terminals are correctly lined up. To open the battery co mp artm en t, s li de the do or downwards

and lift off. Replace the door by sliding it upwards until it fastens into place.

• Follow the warnings printed on the batteries.

• Battery life is about six months to one year, depending on

how much you use the remote control.

• If the remote control does not work properly, fit new

batteries.

• The batteries we supply are only for setting up and

• Always use good-quality batteries.

testing your TV. Please replace them as soon as you

need to.

■■■■

main power button

power lamp

,QLWLDO#VHWWLQJV

,QLWLDO#VHWWLQJV,QLWLDO#VHWWLQJV

When the TV is first turned on, it goes into the initial setting mode, and you will see the JVC logo. Follow the ins truc t io ns on the screen to make the initial settings.

Press the main power button on the TV

The power lamp l ights red (for po wer on), then gre en (for TV on) and the JVC logo is appears.

• If the power lamp stays red and does not change to

green: your TV is in the standby mode. Press the =

(standby) button on the remote control to turn your TV on.

• If the JVC logo does not appear this is because your

TV has already been turned on for the first time: use the “LANGUAGE” and “AUTO PROGRAM”

functions to make the initial settings. For details, see “INSTALL” on page 25.

Setting up your TV

Press the

The LANGUAGE menu appears.

Press the ë

button

3333

ë buttons to choose

ëë

ENGLISH

The on-screen display will then be in English.

1 2 3

4 5 6

7 8

TV OK

RM-C55

Setting up your TV

Press the

button to start the

3333

AUTO PROGRAM function

The AUTO PROGRAM menu appears and the TV channels you receive are automatically stored in the programme numbers list (PR).

To cancel the AUTO PROGRAM function:

Press the

After the TV channels have been

button.

4444

registered in the programme numbers list (PR), the EDIT menu appears

If you want to, you can now edit the programme numbers (PR) using the EDIT/MANUAL func tion. F or details , se e “EDIT/MANUAL” on page 26.

If you do not want to edit p rogra mm e n um be rs (PR), go to the next step.

Note:

• When your TV can detect the TV channel name from

the TV channel broadcast signal, it automatically registers the TV channel name (ID) to the Programme number (PR) in which the TV channel has been registered.

• If a TV channel you want to view is not set to a

programme number (PR), you can set it using the MANUAL function. For details, see “EDIT/MANUAL” on page 26.

• The AUTO PROGRAM function does not set the

programme number PR 0 (AV) for your video cassette recorder. You will need to set this using the MANUAL function.

• In some areas you may get TV reception from more

than one transmitter, for example different ITV regions. In this case each TV channel could be set twice. If this happens, the first set of channels will have the stronger signal. If you want to delete the second set of channels, you will have to do it manually (see page 28).

Press the

button to display the

3333

T-V LINK menu

Follow the T-V LINK menu according to the type of VCR you have connected to the EXT-2 term ina l

If you do not have a T-V LINK compatible VCR connected:

Press the

The T-V LINK menu disappears.

If you have a T-V LINK compatible VCR connected:

Follow the operating procedure “Downloading data to a VCR” on page 30 to transmit the programme number (PR) data.

Now, the initial settings are complete,

button to leave the T-V LINK menu.

4444

and you can watch the TV

709#/,1.#IXQFWLRQV

709#/,1.#IXQFWLRQV709#/,1.#IXQFWLRQV

When you have a T-V L INK compatible VCR connec ted to the EXT-2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features:

■■■■

3UH0VHW#GRZQORDG

3UH0VHW#GRZQORDG3UH0VHW#GRZQORDG

The VCR will automatically download the registered data on the TV channels from the TV. Th is means you do not nee d to set up the program channels on your VCR manually. The preset downl oad f unctio n aut omatic ally begi ns wh en the initial setting is complete or whenever you carry out the AUTO PROGRAM or EDIT/MANUAL functions.

You can also carry out this function using your VCR controls.

When “FEATURE NOT AVAILABLE” is displayed:

If “FEATURE NOT AVAILABLE” is displayed, the download was not performed co rrectly. Before trying to download again, check that:

•the VCR power is turned on

•the VCR is T-V LINK compatible

•the VCR is connected to the EXT-2 terminal

•the SCART cable is fully wired.

■■■■

'LUHFW#5HF

'LUHFW#5HF'LUHFW#5HF

“What You See Is What You Record” You can easily record to VCR the images that you are

watching on the TV. For details, read the manual for your VCR.

Use your VCR controls. “VCR IS RECORDING” is displayed.

In the following situations, the VCR w ill stop recording if the TV is turned off, if th e TV channel or in put is changed, or if the menu is displayed on the TV:

•when recording images from an external device connected

to the TV (for example a camcorder)

•when recording a TV channel aft er it has be en unscram bled

on a decoder

•when recording a TV channel by using the TV’s output

because the VCR’s own tuner cannot properly receive that channel

• You cannot carry out Direct Rec using your TV’s control.

• Generally, the VCR cannot record a TV channel that it

cannot receive properly on its own tuner, even if you can

view that TV channel on the TV. However, some VCRs

can record a TV channel by using the TV’s output if that

channel can be viewed on the TV. For details, see your

VCR instruction manual.

■■■■

79#DXWR#SRZHU#RQ29&5#

79#DXWR#SRZHU#RQ29&5#79#DXWR#SRZHU#RQ29&5# LPDJH#YLHZ

LPDJH#YLHZ

LPDJH#YLHZLPDJH#YLHZ

When the VCR starts playing, the TV automatically turns on and the images from the EXT-2 terminal appear on the screen.

When the VCR menu is operate d, the T V aut omatic ally turns on and the images from the EXT-2 terminal appear on the screen.

This function does not happen if your TV’s main power is turned off. Set your TV’s main power to on (standby mode).

Note:

• A “T-V LINK compatible VCR” means a JVC video

cassette recorder with the T-V LINK logo, or with one of the following logos. However, these VCRs may support some or all of the features described earlier. For details, see your VCR instruction manual.

“Q-LINK” (a trademark of Panasonic Corporation) “Data Logic” (a trademark of Metz Corporation) “Easy Link” (a trademark of Phillips Corporation) “Megalogic” (a trademark of Grundig Corporation) “SMARTLINK” (a trademark of Sony Corporation).

8VLQJ#\RXU#79²WKH#EDVLFV

main power button

power lamp

number buttons

8VLQJ#\RXU#79²WKH#EDVLFV

8VLQJ#\RXU#79²WKH#EDVLFV8VLQJ#\RXU#79²WKH#EDVLFV

■■■■

7XUQ#WKH#PDLQ#SRZHU#RQ

7XUQ#WKH#PDLQ#SRZHU#RQ7XUQ#WKH#PDLQ#SRZHU#RQ

Press the main power button on the TV

The power lamp lights red and your TV is in the standby mod e.

If the Power lamp lights green, the TV is already on.

To turn the main power off:

Press the main power button again.

The power lamp goes off.

To save energy, turn the main power off if you are not using the TV for a long time.

■■■■

7XUQ#WKH#79#RQ#IURP#VWDQGE\#PRGH

7XUQ#WKH#79#RQ#IURP#VWDQGE\#PRGH7XUQ#WKH#79#RQ#IURP#VWDQGE\#PRGH

Press the button, the

(standby) button, the

buttons or the number

ëë

4444

buttons

The power lamp goes from red to green and your TV will be turned on.

To turn the TV off:

Press the

The power lamp change s from gre en to red a nd the TV go es into standby mode.

■■■■

&KRRVH#D#79#FKDQQHO

&KRRVH#D#79#FKDQQHO&KRRVH#D#79#FKDQQHO

Choose the programme number (PR) that the TV channel has been set to.

Use the

Press the ëëëë buttons to choose the programme number (PR) you want.

Use the number buttons:

Enter the programme number (PR) of the channel using the number buttons.

Example

Use the PR LIST:

Press the

display the PR LIST

(standby) button again.

====

ëëëë

buttons:

• PR12

•PR6

→

press ~ and

→

press ¤.

(information) button to

1 2 3

4 5 6

7 8 9

TV OK

F.T/L

FREEZE

SUB-P

RM-C55

;

Using your TV–the basics

PR 0

EXT-1

EXT-4

EXT-2

EXT-3

TV mode

EXT modes

Programme

numbers

PR 1 to PR 99

Press the

ìììì

and

ëëëë

buttons to choose a

programme number (PR). Then press the

button.

3333

• For Programme numbers (PR) where you have the CHILD

LOCK function set, the

next to the programme number (PR) in the PR LIST.

• You cannot use the

number (PR) which has the CHILD LOCK set.

• Even if you try to choose a programme number (PR) with

the CHILD LOCK set, the

appear, and you cannot watch the TV channel. To watch

the TV channel, see “CHILD LOCK” on page 23.

• If the picture is tilted, correct it. See “PICTURE TILT” on

page 19.

■■■■

&KDQJLQJ#WKH#YROXPH

&KDQJLQJ#WKH#YROXPH&KDQJLQJ#WKH#YROXPH

Press the

ìì

(CHILD LOCK) mark appears

@@@@

ëëëë

buttons to choose a Programme

(CHILD LOCK) mark will

@@@@

buttons to change the

volume.

The volume indicator appears, and the volume changes, as you press the

■■■■

:DWFKLQJ#LPDJHV#IURP#

:DWFKLQJ#LPDJHV#IURP#:DWFKLQJ#LPDJHV#IURP# H[WHUQDO#HTXLSPHQW

H[WHUQDO#HTXLSPHQW

H[WHUQDO#HTXLSPHQWH[WHUQDO#HTXLSPHQW

Choose the EXT terminal that the external equipment has been connected to.

Use the

Press the Pressing the

CCCC

buttons.

button:

AAAA

button to choose an EXT terminal.

AAAA

button changes the choice as follows:

AAAA

TV mode EXT modes

Programme

numbers

PR 1 to PR 99

EXT-1

EXT-4

EXT-2

EXT-3

Use the

Press the

Use the PR LIST:

ëëëë

Press the

buttons:

ëëëë

buttons to choose an EXT terminal

(information) button to

display the PR LIST

and

ëëëë

buttons to choose

3333

button

Press the

ìììì

an EXT terminal. Then press the

• The EXT terminals are listed after programme number PR

99.

• You can choose two types of video input signal:

S-VIDEO (Y/C signal) and regular video (composite signal). For details, see “K(S-VIDEO input)” on page 21.

• If you do not have a clear picture or no colour appears,

change the colour system manually. See “COLOUR SYSTEM” on page 18.

• If you choose an EXT terminal with no input signal, the

EXT terminal number becomes fixed on the screen.

• This TV set can automatically change over the input

according to a special signal from an external device. (The EXT-4 terminal does not support it.)

To use the programme number PR 0 (AV):

When the TV and VCR are conne cted only by the aerial cable , choosing the programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to programme number PR 0 (AV) manually. For details, see “EDIT/MANUAL” on page26. Pressing the

• The VCR sends its playback image along the aerial cable

as an RF (radio frequency) signal.

• Also see your VCR instruction manual.

button changes the choice as follows:

AAAA

To return to a TV channel:

Press the buttons.

button, the

4444

ëëëë

buttons or the number

Using your TV–the basics

■■■■

8VLQJ#WKH#EXWWRQV#RQ#WKH#79

8VLQJ#WKH#EXWWRQV#RQ#WKH#798VLQJ#WKH#EXWWRQV#RQ#WKH#79

Press the P B

B buttons to turn the

TV on from standby mode

Press the P

buttons to choose a

programme number (PR) or an EXT terminal

Press the the

CCCC

buttons to change the volume

(volume) button and

DDDD

EXT-2

T 4

EXT-3

EXT-1

AUDIO OUT

Press the

(volume) button

DDDD

The volume level indicator appears

Press the

buttons while the volume

CCCC

level indicator is on screen

T 4

5HPRWH#FRQWURO#EXWWRQV#DQG#IXQFWLRQV

5HPRWH#FRQWURO#EXWWRQV#DQG#IXQFWLRQV5HPRWH#FRQWURO#EXWWRQV#DQG#IXQFWLRQV

1 0XWLQJ#EXWWRQ

0XWLQJ#EXWWRQ

0XWLQJ#EXWWRQ0XWLQJ#EXWWRQ

You can turn the sound off instantly.

1 2 3

4 5 6

7 8 9

TV OK

RM-C55

Press the sound. Pressing the

(muting) button to turn off the

>>>>

(muting) button again

>>>>

restores the previous volume level

2 1XPEHU#EXWWRQV

1XPEHU#EXWWRQV

1XPEHU#EXWWRQV1XPEHU#EXWWRQV

You can choose a programme number (PR) by entering the programme number

Example:

→

•PR12

•PR6

You can also press the EXT terminal.

3 =220#EXWWRQ

=220#EXWWRQ

=220#EXWWRQ=220#EXWWRQ

You can change the screen size by changing to the picture aspect ratio. The normal aspect ratio is 4:3 (width:height). Choose the ideal one from the following ZOOM modes.

press ~ and Ÿ .

→

press ¤.

AAAA

button repeatedly to choose an

AUTO:

For any picture format except normal picture (4:3 aspect ratio), the picture will be automatically displayed in the ideal screen size.

For normal picture (4:3 Aspect Ratio), you can choose a ZOOM mode from the 4:3 AUTO ASPECT menu. For details, see “4:3 AUTO ASPECT” on page 18.

• AUTO may not work properly with poor signal quality. In

this case, choose the best ZOOM mode manually.

• This TV supports WSS (wide-screen signals). When

broadcasts with WSS are received with the ZOOM mode set at AUTO, the most suitable ZOOM mode is automatically chosen according to the WSS received.

• With the ZOOM mode set to AUTO, when a special signal

from an external device such as a VCR or DVD etc. is received, the ZOOM mode automatically changes to 16:9 ZOOM. (Unless the external device is connected to EXT-4 terminal.)

How to open the cover

REGULAR:

Use to view a normal picture (4:3 aspect ratio) as this is its original shape.

Remote control buttons and functions

PANORAMIC:

This stretches the l eft and righ t sides o f a normal pi ctu re (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural.

• The top and bottom of the picture are slightly cut off.

14:9 ZOOM:

This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen.

16:9 ZOOM:

This zooms up the wide picture (16:9 aspect ratio) to the full screen.

16:9 ZOOM SUBTITLE:

This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen.

Press the

mode. Then press the

The picture expands and the chosen ZOOM mode is displayed in about 5 seconds.

• You can pre-set a ZOOM mode for the normal

picture. See “4:3 AUTO ASPECT” on page 18.

$GMXVWLQJ#WKH#YLVLEOH#DUHD#RI#WKH#

$GMXVWLQJ#WKH#YLVLEOH#DUHD#RI#WKH#$GMXVWLQJ#WKH#YLVLEOH#DUHD#RI#WKH# SLFWXUH

SLFWXUH

SLFWXUHSLFWXUH

If subtitles or the top (or bot tom) of th e picture are cut off, you can adjust the visible area of the picture manually.

Press the

The ZOOM menu appears.

Press the

ëëëë

buttons to choose a ZOOM

button

3333

button

5555

button to display the ZOOM

3333

mode indicatior.

The indicator appears.

While it is displayed, press the

ëëëë

buttons

to change the height of the picture.

• You cannot adjust the visible area in REGULAR or

FULL mode.

4 +<3(5#6281'#EXWWRQ

+<3(5#6281'#EXWWRQ

+<3(5#6281'#EXWWRQ+<3(5#6281'#EXWWRQ

You can enjoy sounds with a wider ambience.

Press the

(HYPER SOUND) button to turn

òòòò

the HYPER SOUND function on or off

FULL:

This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen.

• For 16:9 aspect ratio pictures that have been squeezed

into a normal picture (4:3 aspect ratio), use the FULL

mode to restore the picture to its original shape.

&KRRVH#WKH#=220#PRGH

&KRRVH#WKH#=220#PRGH&KRRVH#WKH#=220#PRGH

Press the

button to display the ZOOM

5555

• The HYPER SOUND function does not work properly with

mono sound.

• The HYPER SOUND function can be also turned on or off

by using the SOUND SETTING menu. For details, see “HYPER SOUND” on page 20.

5#,QIRUPDWLRQ#EXWWRQ

#,QIRUPDWLRQ#EXWWRQ

#,QIRUPDWLRQ#EXWWRQ#,QIRUPDWLRQ#EXWWRQ

You can display the PR LIST or the current time on the screen.

Press the

Pressing the display as follows:

(information) button

(information) button changes the

Remote control buttons and functions

9 &RORXU#EXWWRQV

&RORXU#EXWWRQV

&RORXU#EXWWRQV&RORXU#EXWWRQV

The colour buttons are used for the telete xt operati ons or the menu operations. For details , see “~ Teletext control buttons and VCR/(/DVD switch” on page 14 or “Using the TV’s menus” on page 16.

0 2.#EXWWRQ

2.#EXWWRQ

2.#EXWWRQ2.#EXWWRQ

The

button is us ed to operate menus. For details, see

3333

“Using the TV’s menus” on page 16.

ëë

You can choose a programme number (PR) or an EXT terminal.

#%XWWRQV

#%XWWRQV#%XWWRQV

Current time

No display

• You can choose programme numbers (PR) or EXT

terminals with the PR LIST. For details, see “Use the PR

LIST:” on page 8.

• This TV uses teletext data to set the time. If the TV has not

received a TV channel that has teletext programmes

since it was turned on, the time display is blank. To see

the time, choose a TV channel that has teletext

programmes. The time will still be displayed as long as

you do not turn off the TV, even if you choose other TV

channels.

• When watching videos, the incorrect time is sometimes

displayed.

• The

For details, see “Using the TV’s menus” on page 16.

6 79#EXWWRQ

79#EXWWRQ

79#EXWWRQ79#EXWWRQ

You can return to a TV channel instantly.

Press the

The TV returns to the TV mode and a TV channel appears.

• The

“Using the TV’s menus” on page 16.

ìì

You can adjust the volume.

Press the

• The

“Using the TV’s menus” on page 16.

8 6WDQGE\#EXWWRQ

6WDQGE\#EXWWRQ

6WDQGE\#EXWWRQ6WDQGE\#EXWWRQ

(information) button will also operate menus.

button.

4444

button will also operate menus. For details, see

4444

#%XWWRQV

#%XWWRQV#%XWWRQV

buttons to adjust the sound.

ìììì

buttons will also operate menus. For details, see

ìììì

Press the

ëëëë

buttons to choose a

Programme number (PR) or an EXT terminal.

The For details, see “Using the TV’s menus” on page 16.

= 9&52'9'#FRQWURO#EXWWRQV#DQG#

These buttons will opera te a JVC brand VC R or DVD pla yer. Pressing a button tha t looks t he same as the device’ s original remote control button has the same effect as the original remote control.

buttons will also operate menus.

ëëëë

9&52'9'#FRQWURO#EXWWRQV#DQG#

9&52'9'#FRQWURO#EXWWRQV#DQG#9&52'9'#FRQWURO#EXWWRQV#DQG# 9&52

9&52((((2'9'#VZLWFK

9&529&52

Set the VCR/((((/DVD switch to the VCR or

2'9'#VZLWFK

2'9'#VZLWFK2'9'#VZLWFK

DVD position.

VCR:

When you are using a VCR, set the switch to the VCR position.

DVD:

When you are usi ng a DV D player, set the s wi tc h to th e DVD position.

(Text):

((((

When you are viewing Teletext programmes, set the switch to the

Press the VCR/DVD control button to

(Text) position.

((((

control your VCR or DVD player

• If your device is not made by JVC, these buttons will

not work.

• Even if your device is made by JVC, some of these

buttons may not work, depending on the device you are using.

• You can use the

the VCR will receive, or choose the chapter the DVD player plays back.

• Some models of DVD player use the

both operating the fast forward/backward functions and for choosing the chapter. In this case, the 1/ ¡ buttons do not work.

buttons to choose a TV channel

BBBB

buttons for

BBBB

Press the

(standby) button to turn the TV

====

on or off.

When the TV is turned on, the powe r lamp c hanges from red to green.

Remote control buttons and functions

■■■■ ~

####7HOHWH[W#FRQWURO#EX WWRQV#DQG#9&52

7HOHWH[W#FRQWURO#EXWWRQV#DQG#9&52

7HOHWH[W#FRQWURO#EXWWRQV#DQG#9&527HOHWH[W#FRQWURO#EXWWRQV#DQG#9&52

TV OK

((((

2'9'

2'9'#VZLWFK

2'9'2'9'

Choose a teletext page by pressing the

ëëëë

buttons, number buttons or colour

#VZLWFK

#VZLWFK#VZLWFK

buttons

To return to the TV mode:

Press the

• If you have trouble receiving teletext broadcasts,

contact your local dealer or the teletext station.

• In Text mode, the ZOOM mode is fixed to FULL.

• You cannot operate menus when viewing a teletext

programme.

8VLQJ#WKH#/LVW#0RGH

8VLQJ#WKH#/LVW#0RGH8VLQJ#WKH#/LVW#0RGH

You can store the numbers of your favouri te teletext pages in memory and call them up quickly using the colour buttons.

button or

4444

(Text) button.

To store the page numbers:

Press the

button to go into the List

ùùùù

mode

The page numbers you have stored are displa yed at the bottom of the screen.

Press a colour button to choose a

position. Then press the number buttons to enter the page number

%DVLF#RSHUDWLRQ

%DVLF#RSHUDWLRQ%DVLF#RSHUDWLRQ

You can view two types of teletext broadcasts on the TV: FLOF (Fastext) and WST (World Standard Text).

Choose a TV channel with a teletext

broadcast Set the VCR/

/DVD switch to the

((((

(Text)

((((

position

Press the

(Text) button to display

the teletext

Pressing the follows:

(Text) button chan ges th e m od e a s

1 2 3

4 5 6

7 8 9

Press and hold down the

The four page numbers b link white to s how that they are stored in memory.

button

öööö

To call up a stored page:

Press the

Press a colour button having a stored page

To leave the List mode:

Press the

button to enter the List mode

ùùùù

button again.

TV mode

Text mode

+ROG

+ROG+ROG

You can hold a teletext page on the screen for as long as you want, even while several other teletext pages are being received.

Remote control buttons and functions

6L]H

6L]H6L]H

You can double the height of the teletext display.

Press the ÷

÷ button.

÷÷

Press the û

To cancel the Hold function:

Press the û

6XE0SDJH

6XE0SDJH6XE0SDJH

Some teletext pages include sub-pages that are automatically displayed.

You can hold any sub-page, or view it at any time.

Press the õ

sub-page function Press the Number buttons to enter a

sub-page number

To cancel the sub-page function:

Press the

• You can also choose a sub-page by pressing the

5HYHDO

5HYHDO5HYHDO

Some teletext pages include hidden text (such as the answers to a quiz).

You can display the hidden text.

Each time you press the ø hidden or revealed

û button

ûû

Hold indication

û button again.

ûû

õ button to operate the

õõ

Example:

button again.

õõõõ

→

• 3rd sub-page

red or green button.

press ), ), ) and 3.

ø button, text is

øø

,QGH[

,QGH[,QGH[

You can return to the index page instantly.

Press the

FLOF (Fastext)/WST (World Standard Text):

Returns to page 100 or a previously specified page.

List mode:

Returns to the page number displa yed in the lowe r left area of the screen.

&DQFHO

&DQFHO&DQFHO

You can search for a teletext page while watching TV.

Press the number button to enter a page

number, or press a colour button

The TV searches for a teletext page.

Press the

The TV programme appears. When the TV finds the teletext page, its page nu mber app ears in the upper lef t of the screen.

Press the

page when the page number is on the screen

úúúú

button

button.

üüüü

button to return to a tel etext

üüüü

Note:

• The TV mode cannot be resumed by pressing the

button. To return to the TV mode press the

üüüü

button.

4444

8VLQJ#WKH#79·V#PHQXV#

8VLQJ#WKH#79·V#PHQXV#8VLQJ#WKH#79·V#PHQXV#

This TV has a number of functions you can operate using menus. To use all your TV’s functions fully, you need to understand how to use the basic menus.

Press the 3 button to display the MENU (main menu)

The MENU (main menu) appears. In it, the titles of the menus are displayed.

Press the menu title, and press the

The menu appears.

buttons to choose a

button

Follow the menus according to the function you want to use

• For more details, see the descriptions of each menu

and its functions, on the following pages.

• The display appearing at the bottom of a menu

shows you a button on the remote control that you can use when you operate a chosen function.

Press the 3 button to complete the setting

The menu disappears.

To return to the previ ous menu:

Press the

To exit a menu instantly:

Press the 4 button.

(information) button.

3LFWXUH#VHWWLQJ

3LFWXUH#VHWWLQJ3LFWXUH#VHWWLQJ

To display the PICTURE SETTING menu:

Press the 3 button to display the MENU

(main menu) Press the ë buttons to choose PICTURE

SETTING, and press the

■■■■

7,17

7,177,17

You can select one of three TINT modes (three kinds of picture settings) to adjust the picture settings automatically.

Press the ë buttons to choose TINT

Press the ì buttons to choose a mode

COOL:

A cool white colour base with a boost in the colour and contrast levels that creates a more vivid picture.

WARM:

A warm orange/red colour base that creates the appropriate colour and c ontrast level s for watchin g films.

NORMAL:

A normal white colour base with normal colour and contrast levels.

button

• You can change the HUE setting (picture hue) only

when the colour system is NTSC 3.58 or NTSC 4.43. (See “Specifications” on the back cover.)

To return to the default settings in each TINT mode:

Press the blue button.

This returns the picture settings in the TINT mode you have chosen to the default settings, and stores them in the TINT mode.

Press the 3 button to complete the

settings

The menu disappears.

■■■■

(&2#02'(

(&2#02'((&2#02'(

When you set the ECO MODE function to ON, the screen contrast is automatic ally ad justed to a settin g suita ble f or the brightness of yo ur ro om . Th is reduces eye strain for you and the amount of power the TV uses.

Press the ë buttons to choose ECO

MODE Press the ì buttons to choose ON

To cancel the ECO MODE function:

Press the ì buttons to choose OFF.

Press the 3 button to complete the

setting

The menu disappears.

Press the 3 button to complete the

setting

The menu disappears.

■■■■

3LFWXUH#DGMXVWPHQW

3LFWXUH#DGMXVWPHQW3LFWXUH#DGMXVWPHQW

You can change the picture settings of each TINT mode as you like.

The picture settings changed are stored in the TINT mode.

Press the ë buttons to choose an item.

Press the ì buttons to change the

setting.

Lower

Darker

Softer

Lighter

Reddish

Item

CONTRAST

(picture contrast)

BRIGHT

(picture brightness)

SHARP

(picture sharpness)

COLOUR

(picture colour)

HUE

(picture hue)

Higher

Brighter

Sharper

Deeper

Greenish

3LFWXUH#IHDWXUHV

3LFWXUH#IHDWXUHV3LFWXUH#IHDWXUHV

To display the PICTURE FEATURES menu:

Press the 3 button to display MENU (main

menu) Press the ë buttons to choose PICTURE

FEATURES, and press the

■■■■

$872#915

$872#915$872#915

VNR Stands for “video noise reduction”. The AUTO VNR function reduces any “noise” (interf erence or snowing) in the current picture. The function also adjusts the optimum sharpness of the picture (SHARP).

Press the ë buttons to choose AUTO

VNR Press the ì buttons to choose AUTO

MIN:

The AUTO VNR function is cancelled. If you set the mode to AUTO but feel that the sharpness of th e original picture has not been reprod uced fully, cha nge the mode to MIN. However, any noise remaining in the original picture may be emphasized.

MAX:

This mode always reduces any noise as much as possible, irrespect ive of state of the picture. When you set the mode to AUTO but still notice some noise, change the mode to MAX. Howe ver, this may reduce the sharpness of the picture.

button

Press the ì buttons to choose the

appropriate colour system.

PAL:

PAL system

NTSC 3.58:

NTSC 3.58 MHz syste m

NTSC 4.43

NTSC 4.43 MHz syste m

AUTO:

This function detects a colour system from the input signal. You can only use this when you are viewing a picture from programme number PR 0 (AV), or on EXT terminal.

Press the 3 button to complete the

setting

The menu disappears.

• The AUTO function may not work properly if you

have poor signal quality. If the picture is abnormal in the AUTO function, choose another colour system manually.

• You cannot choose NTSC 3.58 or NTSC 4.43 for

programme numbers PR 0 (AV) to PR 99.

■■■■

7=6#$872#$63(&7

7=6#$872#$63(&77=6#$872#$63(&7

You can choose one of three ZOOM modes, REGULAR, PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal picture (4:3 aspect ratio).

Press the ë buttons to choose 4:3 AUTO

ASPECT. Then press the

The sub-menu of the 4:3 AUTO ASPECT function appears.

button

Press the 3 button to complete the

setting.

The menu disappears.

■■■■

&2/285#6<67(0

&2/285#6<67(0&2/285#6<67(0

The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually.

Press the ë buttons to choose COLOUR

SYSTEM. Then press the

The sub-menu of the COLOUR SYSTEM function appears.

button

Press the ë buttons to choose a ZOOM

mode Press the 3 button to complete the

setting

The menu disappears.

■■■■

3,&785(#7,/7

3,&785(#7,/73,&785(#7,/7

Sometimes the Earth’s own magnetic field may make the picture tilt. If this happens, you can correct the picture tilt.

Press the ë buttons to choose PICTURE

TILT. Then press the

The sub-menu of the PICTURE TILT function appears.

Press the ë buttons until the picture

becomes level Press the 3 button to complete the

setting

The menu disappears.

button

Picture features

6RXQG#VHWWLQJ

6RXQG#VHWWLQJ6RXQG#VHWWLQJ

To display the SOUND SETTING menu:

Press the 3 button to display the MENU

(main menu) Press the ë buttons to choose SOUND

SETTING. Then press the

■■■■

67(5(2#2#,‡,,

67(5(2#2#,‡,,67(5(2#2#,‡,,

When you are viewing a b ilingual broadcast p rogramme, y ou can choose the sound from Bilingual I (Sub I) or Bilingual II (Sub II). If you hav e poor reception o n a stereo broadca st, you can change from stereo to mono so und so tha t you can hea r the broadcast more clearly and easily.

Press the ë buttons to choose

STEREO / I • II Press the ì buttons to choose a sound

mode

:Stereo sound

:mono sound

ýýF

:Bilingual I (sub I)

:Bilingual II (sub II)

Press the 3 button to complete the

setting

The menu disappears.

• The sound mode you can choose differs depending

on the TV programme.

• This function does not work in the EXT modes. And

this function does not appear in the SOUND SETTING menu.

■■■■

6RXQG#DGMXVWPHQW

6RXQG#DGMXVWPHQW6RXQG#DGMXVWPHQW

You can adjust the sound to your liking.

Press the ë buttons to choose an item

button

■■■■

63($.(5

63($.(563($.(5

You can turn off the sound from the TV speakers; but you should only do this if you hav e connect ed an aud io syste m to the TV instead of the TV speakers. When you are using this function, see “Turning the TV’s speakers off” on page 31.

When there is no sound from the TV speaker:

If the SPEAKER function is set to O FF, there is no sound from the TV speaker. Press the ë buttons to choose SPEAKER. Then press ì buttons to choose ON.

■■■■

%%(

%%(%%(

You can use the BBE function to enjoy easy-to-listen sound that is faithful to the original sound recorded.

Press the ë buttons to choose BBE.

Press the ì buttons to choose ON.

To cancel the BBE function:

Press ì buttons to choose OFF.

Press the 3 button to complete the

setting.

The menu disappears.

•

Licensed by BBE Sound, Inc. BBE is a registered trademark of BBE Sound, Inc.

■■■■

+<3(5#6281'

+<3(5#6281'+<3(5#6281'

You can enjoy sounds with a wider ambience.

Press the ë buttons to choose HYPER

SOUND Press the ì buttons to choose ON

To cancel the HYPER SOUND function:

Press the ì buttons to choose OFF.

Press the 3 button to complete the

setting

The menu disappears

• The HYPER SOUND function does not work properly

with mono sound.

• You can turn the HYPER SOUND function on or off

with a single press. For details, see “4 HYPER SOUND button” on page 12.

Press the ì buttons to adjust it

Weaker Weaker

Left

Press the 3 button to complete the

setting

The menu disappears.

Item

BASS

TREBLE

BALANCE

Stronger Stronger

Right

(;7#6(77,1*

(;7#6(77,1*(;7#6(77,1*

To display the EXT SETTING menu:

Press the 3 button to display the MENU

(main menu) Press the ë buttons to choose EXT

SETTING. Then press the

■■■■

You can connect a d evice (s uc h a s an S-VHS VCR) to en joy the high-quality picture of the S-VIDEO signal (Y/C signal).

Preparation:

•First read the device’s instruction manual and

“Further preparation” on page 32 to connect the device to the TV properly. Second, follow the device’s instruction manual to set the device so that i t sends an S-VIDEO signal (Y/C signal) to the TV.

•Do not set KKKK(S-VIDEO input) to an EXT terminal

connected to a device which cannot output an S-VIDEO (Y/ C signal). If it is set wrongly, a picture cannot appear.

+609,'(2#LQSXW,

+609,'(2#LQSXW,+609,'(2#LQSXW,

Press the ë buttons or

button

buttons to

choose an EXT terminal

Press the 3 button to complete the

setting.

The menu disappears.

• The EXT-1 terminal does not support S-VIDEO signal

(Y/C signal) and you cannot set KKKK (S-VIDEO input) in the EXT-1 terminal.

• Setting KKKK (S-VIDEO input) changes the head

character from “E” to “S”. When an EXT terminal receives a normal video signal, “E1”, “E2”, “E3” or “E4” appears on the display. This changes to “S2”, “S3” or “S4” when it receives an S-VIDEO signal.

•

Even a device which can output an S-VIDEO signal (Y/C signal) may output a regular video signal (composite signal) depending on the device setting. If a picture cannot appear because the input)

setting has been made, read the device instruction manual carefully again to check for the device settings.

■■■■

/,67

/,67/,67

You can store a name for each of the devices connected to each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appea r on the screen, together with its name.

Press the ë buttons or ì buttons to

KKKK (S-VIDEO

choose an EXT terminal

EXT-1

EXT-3

EXT-2

EXT-4

EXT-1

Press the yellow button and set the

EXT-3

EXT-2

EXT-4

(S-VIDEO input)

KKKK

(S-VIDEO input) mark is displayed. You can view an S-VIDEO signal (Y/C signal) instead of the regular video signal (composite signal).

To cancel the

Press the yellow button and turn off the KKKK (S-VIDEO input) mark.

The regular video signal (comp osite sign al) pi ctures ar e resumed.

(S-VIDEO input) setting:

KKKK

Press the blue button to display the name

list (LIST)

EXT SETTING

Press the ë buttons to choose a name.

Then press the

The LIST disappears and the name is assigned to the EXT terminal.

To erase a name assigned to the EXT terminal:

Choose a blank space.

Press the 3 button to complete the

button.

setting.

The menu disappears.

• You cannot choose an EXT terminal name that is not

on the name list (LIST).

■■■■

'8%%,1*

'8%%,1*'8%%,1*

You can choose a signal source to be output fro m the EXT-2 terminal.

You can do this with the outpu t signal of the device con nected to another EXT terminal, or the picture and sound from a TV channel you are currently view in g.

Press the ì buttons to choose the EXT-2

terminal. Press the ë buttons to choose another

EXT terminal or TV.

Press the 3 button to complete the

setting.

The menu disappears.

• During dubbing, you cannot turn off the TV. Turning

off the TV also turns off the output from the EXT-2 terminal.

• When you choose an EXT terminal as an output, you

can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a device connected to the EXT terminal onto a VCR connected to the EXT-2 terminal.

• The RGB signals from TV games cannot be

output.Teletext programmes cannot be output.

The arrow in the menu represents a signal flow. The left side of the arrow sho w s a signal source outpu t f rom th e EXT-2 terminal.

EXT-1/EXT-3/EXT-4:

The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT-2 terminal.

TV:

The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal.

)($785(6

)($785(6)($785(6

To display the FEATURES menu:

Press the 3 button to display the MENU

(main menu) Press the ë buttons to choose

FEATURES. Then press the

■■■■

6/((3#7,0(5

6/((3#7,0(56/((3#7,0(5

You can set the TV to automatically turn off after a set time.

Press the ë buttons to choose SLEEP

TIMER. Then press the

A sub-menu of the SLEEP TIMER function appears.

button

■■■■

%/8(#%$&.

%/8(#%$&.%/8(#%$&.

You can set the TV to automatically chan ge t o a b lu e s cre en and mute the sound if the s ign al is weak or abs en t, or w hen there is no input from an external device.

Press the ë buttons to choose BLUE

BACK Press the ì buttons to choose ON

To cancel the BLUE BACK function:

Press the ì buttons to choose OFF.

Press the 3 button to complete the

setting

The menu disappears.

■■■■

&+,/'#/2&.

&+,/'#/2&.&+,/'#/2&.

When there is a TV channel you do not want yo ur ch ildren to watch, you can use the CHILD LO CK func tion to lock ou t the TV channel. Even when a child chooses a programme number (PR) for a locked TV c ha nne l th e s cre en w ill ch an ge to blue and display cannot be viewed. U nless you en ter a pre-set ID n umber by a special operation, the lock cannot be released and the child cannot view the TV channel.

(CHILD LOCK) so the TV channel

@@@@

Press the

time

You can set the time for up to 120 minutes (2 hours) in 10 minute steps.

To cancel the SLEEP TIMER function:

Press the ï button to set the period of time to “OFF.”

Press the 3 button to complete the

setting

The menu disappears.

• One minute before the SLEEP TIMER function turns

off the TV, “GOOD NIGHT!” appears.

• The SLEEP TIMER function cannot be used to turn

off the TV’s main power.

• When the SLEEP TIMER function is on, you can

display the sub-menu of the SLEEP TIMER function again to confirm or change the remaining period of time of the SLEEP TIMER function. Press the 3 button to leave the menu after confirming or changing the remaining time.

buttons to set the period of

7R#VHW#WKH#&+,/'#/2&.#IXQFWLRQ

7R#VHW#WKH#&+,/'#/2&.#IXQFWLRQ7R#VHW#WKH#&+,/'#/2&.#IXQFWLRQ

Press the ë buttons to choose CHILD

LOCK. Then press the A button.

“SET ID NO.” (ID number setting screen) appears.

To set the ID number you want

Press the ë buttons to choose a number

Press the ì buttons to move the cursor

Press the 3 button.

The sub-menu of CHILD LOCK appears.

Press the ë buttons to choose a TV

channel

Every time you press the ë buttons, the programme number (PR) changes, and the pi cture of the TV channel registered in the programme number (PR) is displayed on the screen.

FEATURES

Press the blue button and set the CHILD

LOCK function.

(CHILD LOCK) appears and the TV channel is locked.

To reset the CHILD LOCK function:

Press the blue button again.

(CHILD LOCK) disappears.

Press the 3 button to complete the

setting.

The menu disappears.

• To disable easy resetting of the CHILD LOCK

function, the menu disappears if you choose the CHILD LOCK function and press the

7R#YLHZ#D#ORFNHG#79#FKDQQHO

7R#YLHZ#D#ORFNHG#79#FKDQQHO7R#YLHZ#D#ORFNHG#79#FKDQQHO

Choose a programme number (PR) for a

button.

locked TV channel, by using the number buttons or PR LIST

The screen changes to blue and the @ (CHILD LOCK) appears. You cannot view the TV channel.

■■■■

'(&2'(5#+(;705,

'(&2'(5#+(;705,'(&2'(5#+(;705,

You can only use this function if you have a decoder connected to a T-V LINK compatible VCR, which in turn is connected to the EXT-2 terminal. To use this function, see “Using the DECODER (EXT-2) function” on page 30.

•If you have not connected a decoder with a T-V LINK compatible VCR to th e EXT-2 terminal, setting this fu nc tion to “ON” by mistake causes the picture/sound of a TV channel you are currently viewing to disapper.

Press the

(information) button to

display “ID NO.” (ID No. input screen)

Press the number buttons to enter the ID

number

The lock is temporaril y released so you ca n view th e TV channel.

If you have forgotten the ID number:

Perform step 1 of “To set the CHILD LOCK function”. After confirming the ID number, press the exit the menu.

• Even if you reset the lock temporarily, it does not

mean that the CHILD LOCK function set for the TV channel is cancelled. The next time anyone tries to view the TV channel, it will be locked again.

• When you want to cancel the CHILD LOCK function,

you must perform the operation “To set the CHILD LOCK function” again.

• To stop it being easy to choose the programme

number (PR) of a locked TV channel, the programme number (PR) has been set so that it cannot be chosen by the of the TV.

• To stop it being easy to reset of the lock, “ID NO.” (ID

No. input screen) is set so that it cannot appear unless you press the

buttons or the buttons

(Information) button.

button to

,167$//

,167$//,167$//

To display the INSTALL menu:

Press the

(main menu) Press the

INSTALL menu. Then press the

■■■■

/$1*8$*(

/$1*8$*(/$1*8$*(

You can choose the language you want to use for the on-screen display from the language list in the menu.

Press the

LANGUAGE. Then press the

A sub-menu of the LANGUAGE function appears.

Press the

language Press the

setting

The menu disappears.

■■■■

$872#352*5$0

$872#352*5$0$872#352*5$0

You can automatically store the TV channels for which you have the best reception. Store them in the TV’s programme numbers (PR) list by doing the following.

Press the

PROGRAM Press the

PROGRAM function

The AUTO PROGRAM menu appears and the TV channels you receive are aut omatically registered in the programme numbers (PR) list.

button to display the MENU

3333

buttons to choose the

ëëëë

3333

buttons to choose

ëëëë

button

3333

buttons to choose a

ëëëë

button to complete the

3333

buttons to choose AUTO

ëëëë

button to start the AUTO

3333

button

To cancel the AUTO PROGRAM function:

Press the 4 button.

After the TV channels have been stored in

the programme numbers (PR) list, the EDIT menu appears

You can now edit the programme numbers (PR) list using the EDIT/MANUAL function. For details, see “EDIT/MANUAL” on page26.

When not using the EDIT/MANUAL function:

If you do not need to use the EDIT/MANUA L function, go to the next step.

Press the

Operate the T-V LINK menu according to

the type of video cassette recorder (VCR) you have connected to the EXT-2 terminal

If you do not have a T-V LINK compatible VCR connected:

Press the 4 button to leave the T-V LINK menu.

The T-V LINK menu disappears, and all the s ettings are completed.

If you have a T-V LINK compatible VCR connected:

See “Downloading data to a VCR” on page 30 to transmit the programme number (PR) data to the VCR.

• When your TV can detect the TV channel name from

the TV channel broadcast signal, it automatically registers the TV channel name (ID) to the Programme number (PR) in which the TV channel has been registered.

• If a TV channel you want to view is not set to a

Programme number (PR), set it manually using the MANUAL function. For details, see “EDIT/MANUAL” on page 26.

• The AUTO PROGRAM function does not set the

programme number PR 0 (AV) for your video cassette recorder. You will need to set this using the manual function.

• In some areas you may get TV reception from more

than one transmitter, for example. different ITV regions. In this case each TV channel could be set twice. If this happens, the first set of channels will have the stronger signal. If you want to delete the second set of channels, you will have to do it manually (see page 28).

button to display the T-V LINK

3333

INSTALL

■■■■

(',720$18$/

(',720$18$/(',720$18$/

The EDIT/MANUAL functions are divided into two types:

editing the current programme numbers (PR)

•

(EDIT functions); and

manually storing a TV channel you want to view a

•

programme number (PR) (MANUAL function). Here are the details about these functions:

MOVE:

This function changes the programme number (PR) of a TV channel.

ID:

This function registers a channel name (ID) to a TV channel.

INSERT:

This function adds a new TV channel in the current programme numbers (PR) list by using the CH/CC number.

DELETE:

This function deletes a TV channel you do not want to list.

MANUAL:

This function manually stores a new TV channel in a programme number (PR).

• For programme number PR 0, “AV” appears in the

programme numbers (PR) list.

• An EXT terminal number does not appear in the

programme numbers (PR) list.

• The CH/CC number is a number unique to the TV and

corresponds to the channel number of a TV channel. For the relationship between a channel number and a CH/CC number, see “CH/CC NUMBER” on page 28.

• You cannot use the INSERT function if you do not know

the channel number of a TV channel. Use the MANUAL function to register a TV channel in the programme number (PR) list.

Caution:

•

Using the MOVE, DELETE or INSERT funct ions rewrites the current programme numbers (PR) list. Therefore, the programme numbers (PR) of some of the TV channels will change.

•

Using the MANUAL functio n for a TV ch ann el for which the CHILD LOCK function has been set cancels the CHILD LOCK function for that channel.

•

Using the MANUAL functio n for a TV ch ann el for which the DECODER (EXT-2) function has been set to ON returns the setting of the DECODER (EXT-2) function for that channel to OFF.

•

When a TV channel has already been registered in PR 99, using the INSERT function deletes that TV channel.

Press the

MANUAL. Then press the

ëëëë

buttons to choose EDIT/

button

3333

Follow the options for the function you

want to use Press the

button to complete the

3333

settings

The T-V LINK menu appears.

Follow the T-V LINK menu according to the

type of VCR you have connected to the EXT-2 terminal

If you do not have a T-V LINK compatible VCR connected:

Press the 4 button to leave the T-V LINK menu.

The T-V LINK menu disappears an d all the s etti ng s are completed.

If you have a T-V LINK compatible VCR connected:

Follow the operating procedure “Downloading data to a VCR” on page 30 to transmit the programme number (PR) data to the VCR.

029(

029(029(

Press the

ëëëë

buttons to choose a TV

channel

Every time you press the number (PR) changes, and the picture of the TV channel stored in the programme number (PR) appears on the screen.

Press the

îîîî

button to start the MOVE

ëëëë

buttons, the programme

function

Press the

ëëëë

buttons to choose a new

programme number (PR)

To cancel the MOVE function:

Press the

(information) button.

INSTALL

Press the

ïïïï

button to change the programme number (PR) of a TV channel to a new programme number (PR)

,','

Press the

ëëëë

buttons to choose a TV

channel

Every time you press the number (PR) changes, and the picture of the TV channel stored in the programme number (PR) appears on the screen.

Press the red button to start the ID

ëëëë

buttons, the programme

function

Press the

ëëëë

buttons to choose the first character of a channel name (ID) you want to give the TV channel

• You can give your own unique channel name (ID) to

the TV channel. When you have finished step 3, do not go to step 4. Press the cursor, and press the character of the channel name (ID). Then press the

button to register the channel name (ID) to the TV

3333

channel.

,16(57

,16(57,16(57

Preparation:

•You need to find the CH/CC number for the TV channel. Find the CH/CC number from the “CH/CC NUMBER” table on page 28 based on the channel number of the TV channel.

Press the

ëëëë

buttons to choose a

ìììì

ëëëë

buttons to move the

buttons to choose each

Programme number (PR) for which you will register a new TV channel

Press the green button and start the

INSERT function

To cancel the INSERT function:

Press the

(Information) button.

Press the blue button to display the ID LIST

(channel name list)

Press the

ëëëë

buttons to choose the

channel name (ID)

To cancel the ID function:

Press the

(Information) button.

button to give a channel

3333

name (ID) to a TV channel

Press the

ëëëë

buttons to choose “CC” or “CH” according to the CH/CC number of the TV channel.

To cancel the INSERT function:

Press the

Press the Number button to enter the re-

(Information) button.

maining CH/CC number.

The TV shifts to registration mode. When the registration i s completed , the pict ure of the TV

channel appears on the screen.

• The CH/CC number is a number given to each

broadcast frequency that carries a TV channel. If the TV cannot detect the TV channel corresponding to the broadcast frequency indicated by the CH/CC number, a “no-signal” picture appears.

INSTALL

CH Channel

CH 02 / CH 202 E2, IR A CH 03 / CH 203 E3, IR B, ITALY A CH 04 / CH 204 E4, IR C, ITALY B CH 05 / CH 205 E5, IR D, ITALY D CH 06 / CH 206 E6, IR E, ITALY E CH 07 / CH 207 E7, IR F, ITALY F CH 08 / CH 208 E8, IR G CH 09 / CH 209 E9, ITALY G CH 10 / CH 210 E10, IR H, ITALY H CH 11 / CH 211 E11, IR J, ITALY H+1 CH 12 / CH 212 E12, ITALY H+2 CH 21 / CH 221 E21 CH 22 / CH 222 E22 CH 23 / CH 223 E23 CH 24 / CH 224 E24 CH 25 / CH 225 E25 CH 26 / CH 226 E26 CH 27 / CH 227 E27 CH 28 / CH 228 E28 CH 29 / CH 229 E29 CH 30 / CH 230 E30 CH 31 / CH 231 E31 CH 32 / CH 232 E32 CH 33 / CH 233 E33 CH 34 / CH 234 E34 CH 35 / CH 235 E35 CH 36 / CH 236 E36 CH 37 / CH 237 E37 CH 38 / CH 238 E38 CH 39 / CH 239 E39

CH Channel

CH 40 / CH 240 E40 CH 41 / CH 241 E41 CH 42 / CH 242 E42 CH 43 / CH 243 E43 CH 44 / CH 244 E44 CH 45 / CH 245 E45 CH 46 / CH 246 E46 CH 47 / CH 247 E47 CH 48 / CH 248 E48 CH 49 / CH 249 E49 CH 50 / CH 250 E50 CH 51 / CH 251 E51 CH 52 / CH 252 E52 CH 53 / CH 253 E53 CH 54 / CH 254 E54 CH 55 / CH 255 E55 CH 56 / CH 256 E56 CH 57 / CH 257 E57 CH 58 / CH 258 E58 CH 59 / CH 259 E59 CH 60 / CH 260 E60 CH 61 / CH 261 E61 CH 62 / CH 262 E62 CH 63 / CH 263 E63 CH 64 / CH 264 E64 CH 65 / CH 265 E65 CH 66 / CH 266 E66 CH 67 / CH 267 E67 CH 68 / CH 268 E68 CH 69 / CH 269 E69

CC Channel

CC 01 / CC 201 S1 CC 02 / CC 202 S2 CC 03 / CC 203 S3 CC 04 / CC 204 S4 CC 05 / CC 205 S5 CC 06 / CC 206 S6 CC 07 / CC 207 S7 CC 08 / CC 208 S8 CC 09 / CC 209 S9 CC 10 / CC 210 S10 CC 11 / CC 211 S11 CC 12 / CC 212 S12 CC 13 / CC 213 S13 CC 14 / CC 214 S14 CC 15 / CC 215 S15 CC 16 / CC 216 S16 CC 17 / CC 217 S17 CC 18 / CC 218 S18 CC 19 / CC 219 S19 CC 20 / CC 220 S20 CC 21 / CC 221 S21 CC 22 / CC 222 S22 CC 23 / CC 223 S23 CC 24 / CC 224 S24 CC 25 / CC 225 S25 CC 26 / CC 226 S26 CC 27 / CC 227 S27 CC 28 / CC 228 S28 CC 29 / CC 229 S29 CC 30 / CC 230 S30

CC Channel

CC 31 / CC 231 S31 CC 32 / CC 232 S32 CC 33 / CC 233 S33 CC 34 / CC 234 S34 CC 35 / CC 235 S35 CC 36 / CC 236 S36 CC 37 / CC 237 S37 CC 38 / CC 238 S38 CC 39 / CC 239 S39 CC 40 / CC 240 S40 CC 41 / CC 241 S41 CC 75 / CC 275 X CC 76 / CC 276 Y CC 77 / CC 277 Z, ITALY C CC 78 / CC 278 Z+1 CC 79 / CC 279 Z+2

'(/(7(

'(/(7('(/(7(

Press the

buttons to choose a TV

ëëëë

channel

Every time you press the ë buttons, the programme number (PR) changes over, and the picture of the TV channel stored in the programme number list (PR) appears on the screen.

Press the yellow button to delete the TV

channel

The TV channel is deleted fro m the programme numbers (PR) list.

0$18$/

0$18$/0$18$/

■■■■

&+2

&+2&&#180%(5

&&#180%(5

&+2&+2

&&#180%(5&&#180%(5

• When you want to use the INSERT function on page 27, find the CH/CC number corresponding to the channel number of the TV channel from this table.

If you want to know a particular TV channel’s channel menu, look in TV listings magazines or contact the broadcaster.

Press the

ëëëë

buttons to choose a programme number (PR) for a new TV channel

Press the blue button to activate the

MANUAL function

To cancel the MANUAL function:

Press the

Press the green or red button t o search for

a TV channel

Scanning stops when the TV finds a TV channel. Then the TV channel is displayed.

Press the green or red button repeatedly

until the TV channel you want appears

If the TV channel reception is poor:

Press the blue or yellow button to fine-tune the TV channel.

Press the

channel to a programme number (PR)

The normal EDIT menu appears.

(Information) button.

button and register the TV

3333

'(02

'(02'(02

The DEMO function a utoma ticall y demon strates some of t he TV functions.

To display the DEMO menu:

Press the

(main menu) Press the

Then press the

button to display the MENU

3333

ëëëë

buttons to choose DEMO.

button

3333

Press the

setting

The DEMO function is set to ON, and the demons tration will start.

To stop the demonstration:

Press one of the buttons on the remote control.

When the DEMO function is set to ON:

Each time the TV is turned on, the demonstration st art s automatically. If you do not want that to happen, cancel the DEMO function:

Display the DEMO menu again

Press the

function

buttons to choose ON

ëëëë

button to complete the

3333

ëëëë

buttons to choose OFF

button to cancel th e DEMO

3333

2WKHU#PHQXV

2WKHU#PHQXV2WKHU#PHQXV

■■■■

'RZQORDGLQJ#GDWD#WR#D#9&5

'RZQORDGLQJ#GDWD#WR#D#9&5'RZQORDGLQJ#GDWD#WR#D#9&5

You can send to the latest pro gramm e numb ers (PR) dat a to a VCR with the T-V LINK function.

•You can only do this when a T-V LINK compatible VCR is connected to the EXT-2 terminal.

•This only works when the T-V LINK menu is being displayed.

Turn on the VCR

Press the

The data transmission begins.

The T-V LINK menu disappears once the data transmission ends.

When the T-V LINK menu changes over to another menu:

The TV has finished its menu. This new menu is opperated from the VCR. See the VCR instruction manual for what to do next.

• If “FEATURE NOT AVAILABLE” appears at the T-V

LINK menu, check the following three items. Then press the

− Has a T-V LINK compatible VCR been

connected to the EXT-2 terminal?

− Has the VCR power been turned on?

− Does the SCART cable that connects the EXT-2

terminal to the T-V LINK compatible VCR have all its proper connections?

■■■■

8VLQJ#WKH#'(&2'(5#+(;705,##

8VLQJ#WKH#'(&2'(5#+(;705,##8VLQJ#WKH#'(&2'(5#+(;705,## IXQFWLRQ

IXQFWLRQ

IXQFWLRQIXQFWLRQ

If you have a decoder connected to a T-V LINK compatible VCR, which in turn is connected to the EXT-2 terminal, use the DECODER (EXT-2) function to unscramble the scrambled TV channels.

Turn on the decoder power

Display the scrambled TV channel on the

Even if the decoder is working, a scrambled picture appears.

button

3333

button to retry data transmission.

3333

Press the

FEATURES. Then press the

The FEATURES menu appears.

Press the

DECODER (EXT-2) . Then press the buttons to choose ON

An unscrambled picture appears.

To cancel the DECODER (EXT-2) function:

Press the

setting

The T-V LINK menu appears.

Follow “Downloading data to a VCR” on

page 30 to transmit the programme number (PR) data to the VCR

If you have another TV channel you wa nt to

unscramble using a decoder, repeat steps 2 to 7.

• If the DECODER (EXT-2) function has been set to

“ON” but the TV channel cannot be unscrambled, check the following:

− Has the decoder been connected to the VCR

properly according to the VCR and decoder instruction manuals?

− Has the decoder power been turned on?

−

Can the TV channel be unscrambled with a decoder?

− Do you need to change the VCR settings in order

to connect the decoder? Confirm that the VCR is set properly by rechecking the VCR Instruction manual.

buttons to choose

ëëëë

buttons to choose

ëëëë

buttons to choose OFF.

ìììì

button to complete the

3333

button.

3333

ìììì

Press the

The MENU (main menu) appears.

button to display the MENU

3333

■■■■

7XUQLQJ#WKH#79·V#VSHDNHUV#RII

7XUQLQJ#WKH#79·V#VSHDNHUV#RII7XUQLQJ#WKH#79·V#VSHDNHUV#RII

Other menus

Press the

(main menu) Press the

SETTING. Then press the display the SOUND SETTING menu

The SOUND SETTING menu appears.

Press the

speaker. Then press the choose OFF

The sound from the TV speakers is cut.

Press the

settings

The menu disappears.

• You can use the ìììì buttons of the TV remote control

and the D (volume) button at the front panel of your TV set to control the volume of each speaker simultaneously.

button to display the MENU

3333

buttons to choose SOUND

ëëëë

button to

3333

buttons to choose

ëëëë

buttons to

ìììì

button to complete the

3333

)XUWKHU#SUHSDUDWLRQ

E X T

AUDIO OUT

EXT-1

EXT-2

EXT-3

E X T 4

)XUWKHU#SUHSDUDWLRQ

)XUWKHU#SUHSDUDWLRQ)XUWKHU#SUHSDUDWLRQ

■■■■

&RQQHFWLQJ#H[WHUQDO#HTXLSPHQW

&RQQHFWLQJ#H[WHUQDO#HTXLSPHQW&RQQHFWLQJ#H[WHUQDO#HTXLSPHQW

Connect the equipment to the TV, making the correct rear panel and front panel connections.

Before connecting anything:

• Read the manuals that came with the equipment.

Depending on the equipment, the connection method may be different from the diagram. Also, the equipment settings may need to change depending on the connection method.

• Turn off all the equipment including the TV.

• The “SPECIFICATIONS” on the back cover give the

details of the EXT terminals. If you are connecting equipment not listed in the following connection diagram, see the table to choose the best EXT terminal.

• Connecting cables are not supplied.

1 VCR (composite signal) 2 VCR (composite signal/S-VIDEO signal) 3 T-V LINK compatible VCR (composite signal/S-VIDEO

signal)

4 Decoder 5 DVD player (composite signal/S -VIDEO signal) 6 DVD player (composite signal/RGB signal) 7 TV game (composite signal/RGB signal) 8 TV game (composite signal/S-VIDEO signal) 9 Headphones 0 Camcorder (composite signal/S-VIDEO signal)

- SCART cable

= Audio cable ~ Video cable ! S-VIDEO cable

EXT-2

EXT-3

EXT-1

AUDIO OUT

T 4

AUDIO OUT

EXT-2

EXT-3

EXT-1

(TXLSPHQW#ZKLFK#FDQ#RXWSXW#WKH#

(Terminals on rear)

(TXLSPHQW#ZKLFK#FDQ#RXWSXW#WKH#

(TXLSPHQW#ZKLFK#FDQ#RXWSXW#WKH#(TXLSPHQW#ZKLFK#FDQ#RXWSXW#WKH# 609,'(2#VLJQDO#+<2&#VLJQDO,#VXFK#DV#

609,'(2#VLJQDO#+<2&#VLJQDO,#VXFK#DV#

609,'(2#VLJQDO#+<2&#VLJQDO,#VXFK#DV#609,'(2#VLJQDO#+<2&#VLJQDO,#VXFK#DV# DQ#609+6#9&5

DQ#609+6#9&5

DQ#609+6#9&5DQ#609+6#9&5

Connect the equipment to an EXT terminal (but not the EXT-1 terminal).

You can choose between an S-VIDEO signal (Y/C signal) an d a regular video signal (composite signal). For details of how to operate the equipment, see “K(S-VIDEO input)” on page 21.

709#/,1.#FRPSDWLEOH#9&5

709#/,1.#FRPSDWLEOH#9&5709#/,1.#FRPSDWLEOH#9&5

Be sure to connect the T-V LINK compatible VCR to the EXT-2 terminal. If not, the T-V LINK function will not work properly.

• When connecting a T-V LINK compatible VCR to the

EXT-2 terminal, be sure to connect the decoder to the VCR. If not, the T-V LINK function may not work properly. After you have stored TV channels in the programme numbers (PR) list, set the DECODER (EXT-2) function for the programme number (PR) to ON to unscramble a scrambled TV channel. For details, see “Using the DECODER (EXT-2) function” on page 30.

&RQQHFWLQJ#KHDGSKRQHV

&RQQHFWLQJ#KHDGSKRQHV&RQQHFWLQJ#KHDGSKRQHV

Connect the headphones with a stere o mini -ja ck (3.5mm diameter) to the headphone jack at the TV front panel.

• When you connect the headphones, the TV speakers go

off.

9LGHR#RU#VRXQG#VLJQDO#RXWSXW#IURP#

9LGHR#RU#VRXQG#VLJQDO#RXWSXW#IURP#9LGHR#RU#VRXQG#VLJQDO#RX WSXW #IURP# WKH#(;705#WHUPLQDO

WKH#(;705#WHUPLQDO

WKH#(;705#WHUPLQDOWKH#(;705#WHUPLQDO

You can change over the output of the video/sound signal from the EXT-2 terminal. This is use ful when y ou want t o dub the video/sound from a nother device onto the VC R connected to the EXT-2 terminal. For details on how to do this, see “DUBBING” on page 22.

Further preparation

■■■■

&RQQHFWLQJ#VSHDNHUV#RU#DQ#

&RQQHFWLQJ#VSHDNHUV#RU#DQ#&RQQHFWLQJ#VSHDNHUV#RU#DQ# DPSOLILHU

DPSOLILHU

DPSOLILHUDPSOLILHU

See the audio equipment connection diagram below and connect the audio equipment to the TV.

You can use external f ront speakers to listen to the T V sound, instead of the TV speakers. For details of how to use them, see “Turning the TV’s speakers off” on page 31.

Before connecting anything:

• Read the manuals that came with the amplifier and

speakers.

• Turn the TV and amplifier off.

• To prevent magnetism from the speakers affecting the TV

screen, use magnetic-shielded speakers for the front speakers.

• Connecting cables are not supplied.

1 Amplifier 2 Front speakers (magnetic-shielded type)

• Connecting headphones to the TV does not cut off the

output from the AUDIO OUT terminal. You cannot cut the sound from the front speaker even if you connect headphones to the TV.

• Setting the volume of the amplifier too high may damage

the front speakers.

79#RXWSXW#IURP#WKH#(;704#WHUPLQDO

79#RXWSXW#IURP#WKH#(;704#WHUPLQDO79#RXWSXW#IURP#WKH#(;704#WHUPLQDO

The video/sound signal of a TV channel you are viewing is always output from the EXT-1 terminal.

• Changing over a programme number (PR) also changes

over the TV output from the EXT-1 terminal.

• The video/sound signal from an EXT terminal cannot be

output.

• Teletext programmes cannot be output.

79#EXWWRQV#DQG#SDUWV

79#EXWWRQV#DQG#SDUWV79#EXWWRQV#DQG#SDUWV

■■■■

)URQW#SDQHO

)URQW#SDQHO)URQW#SDQHO

EXT-2

T 4

EXT-3

EXT-1

AUDIO OUT

T 4

Remote control sensor and ECO sensor

Power lamp pages 5 and 8

Main power button pages 5 and 8

Headphone jack (mini jack) page 32

■■■■

5HDU#3DQHO

5HDU#3DQHO5HDU#3DQHO

EXT-2

T 4

AUDIO OUT terminal page 33

Aerial sock et page 4

EXT-1 terminal pages 4, 21 and 32

EXT-3

EXT-1

AUDIO OUT

∨∨∨∨/∧

∧

buttons /

∧ ∧

DDDD

(Volume) button page 10

EXT-4 terminal pages 21 and 32

EXT-2 terminal pages 4, 7, 21 and 32

EXT-3 terminal pages 21 and 32

AUDIO OUT

–/+ buttons page 10

EXT-2

EXT-3

EXT-1

7URXEOHVKRRWLQJ

7URXEOHVKRRWLQJ7URXEOHVKRRWLQJ

If a problem arises while you are using the TV, please read this troubleshooting guide carefully before you ask to have the TV repaired. You may be able to fix it easil y by yourse lf. For example, if the main s plug is disco nnected from the mains ou tlet, or the TV aerial has problems, you may think there is a problem with the TV itself.

Important:

•This troubleshooting guide only covers problems whose causes are not easy to decide. If you have a question when you are operating a function, read the page(s) for that function carefully, not this troubleshooting guide.

•If you follow the advice in this troubleshooting guide without any success, unplug the mains plug and ask for your TV to be repaired. Do not attempt to repair the TV by yourself or to remove the rear cover of the TV.

,I#\RX#FDQQRW#WXUQ#RQ#WKH#79

,I#\RX#FDQQRW#WXUQ#RQ#WKH#79,I#\RX#FDQQRW#WXUQ#RQ#WKH#79

•Is the mains plug connected to the mains outlet?

•Is the power lamp lit? If not, press the main power button.

1R#SLFWXUH#RU#QR#VRXQG

1R#SLFWXUH#RU#QR#VRXQG1R#SLFWXUH#RU#QR#VRXQG

•Have you chosen a TV c hannel with ve ry poor recepti on? If so, the BLUE BACK function will be activated: the entire screen becomes blue, and the sound is muted. If you still want to view the TV channel, follow the description “BLUE BACK” on page 23 to try to change the BLUE BACK function setting to OFF.

•Have you connected headphones to the TV? Connecting headphones to the TV turns off the TV speakers.

•Have you set the speaker function to OFF? Follow the description “SPEAKER” on page 20 to check the speaker function setting.

3RRU#SLFWXUH

3RRU#SLFWXUH3RRU#SLFWXUH

•If noise (snow) totally block out the picture, there may be a problem with the aerial or aerial cable. Check the following to try to solve the problem:

− Have the TV and aerial been connected properly?

− Has the aerial cable been damaged?

− Is the aerial pointing in the right direction?

− Is the aerial itself faulty?

•If the TV or aerial suffers interference from other equipment,

stripes or noise may appear in the picture. Move any equipment sach as an amplifier, personal computer, or a hair drier, that can cause interference away from your TV. Or try moving the TV. If the aerial suffers interference from a radio tower or high-voltage wire, plea se contact your local dealer.

•If the TV suffers interference from signals reflecting from mountains or buildings, double-pictures (ghosting) will occur. Try to change the aerial’s direction or replace it with one with better directionality.

•Are your COLOUR SYSTEM settings correct? Follow the description “COLOUR SYSTEM” on page18 to try to solve the trouble.

•Have the COLOUR and BRIGHT settings been adjusted properly? Follow the description “Picture adjustment” on page 17 to try to adjust them properly.

•Videotaping teletext is not recommended because it may not record correctly.

•When a white and bright still image (suc h as a white dress) is displayed on the screen, the white part may look as if it is coloured. This is unavoidab le due to the nature of the picture tube itself, and not due to a TV failure. When the picture disappears from the screen, the unnatural colours will also disappear.

3RRU#VRXQG

3RRU#VRXQG3RRU#VRXQG

•Have you adjusted BASS or TREBLE properly? If not, follow the description “Sound adjustment” on page 20.

•When TV channel reception is poor, it can be hard to hear stereo or bilingual sound. In this case, follow the description “STEREO / I•II” on page 20 to hear the sound more easily by changing it to a mono sound.

,I#WKH#79#GRHV#QRW#UHVSRQG#WR#WKH#

,I#WKH#79#GRHV#QRW#UHVSRQG#WR#WKH#,I#WKH#79#GRHV#QRW#UHVSRQG#WR#WKH# UHPRWH#FRQWURO

UHPRWH#FRQWURO

UHPRWH#FRQWUROUHPRWH#FRQWURO

•Have the batteries of the remote control worn out? Follow the description “Putting batteries into the re mote con trol” on page 4 and replace them with new batteries.

•Have you attempted to use the remote control from the sides or rear of the T V or from m ore than s even metres away from the TV ? Use the remote control in the front of your TV or from less than seven metres away.

•When you are viewing a teletext programme, you cannot operate the menus. Press the ordinary TV programme, and then try operating the menus.

•If the TV will not respond suddenly, press the main power button on the TV and turn off the main power. Press the main power button again to turn on the TV. If the TV return s to a normal state, it is not a failure.

2WKHU#LVVXHV

2WKHU#LVVXHV2WKHU#LVVXHV

•When the SLEEP TIMER function operates, the TV is automatically turned of f. If the TV is turned off sudde nly, try to press the again. If the TV goes back to normal, there is no problem.

•When the TV is receiving a wide-screen signal (WSS) or a signal from an external d evice af fecting the s creen size, t he ZOOM mode automatically changes. When you want to resume the previous Z OOM mode, p ress t he ZOO M butt on again.

•If you bring a magnetised de vice such a s a spe aker ne ar to your TV, the picture may be warped or unnatur al colors now appear at the corners of the screen. In this case, keep the device away from your TV. If speakers cause this to ha ppen, use magnetic-shielded speakers instead.

•A picture may be tilted due to the eart h’s own magnetic field. If so, use the “PICTURE TILT” on page 19 to corect the tilt.

•The TV may make a crackling sound due to a sudden change in temperature . The picture or s ound may be no mal. If you hear crackling sounds frequently while you are viewing the TV, there may be othe r causes. As a precaution, ask your service technician to inspect it.

•Touching the screen may caus e yo u to feel a slight electric shock due to its sta tic ele ctr icity. This is u navoi dable due to the construction of the picture tube. It is not a problem with the TV. You can rest assured that this static discharge is no t harmful.

(standby) button to turn on the TV once

button to return to the

JVC AV32S2EI, InteriArt AV32S2EI Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual