JVC GZ-VX700, GZ-VX705 User Guide
HD MEMORY CAMERA
Detailed User Guide
GZ-VX700/GZ-VX705
LYT2463-031A
Table of Contents
Beginner’s Guide ........................................................... 5
Charging .................................................................................. 5
Recording ................................................................................ 5
Playback .................................................................................. 5
Shooting Tips ........................................................................... 5
Holiday Season/Christmas ...................................................... 6
Wedding .................................................................................. 7
Travel ....................................................................................... 8
Amusement Park ................................................................... 10
Using Wi-Fi
Wi-Fi Capabilities ................................................................... 11
Operating Environment .......................................................... 12
Precautions on Using Wi-Fi ................................................... 12
Image Monitoring via Direct Connection (DIRECT
MONITORING) .................................................................. 13
Recording the Location Information ....................................... 16
Image Monitoring via an Access Point at Home (OUTSIDE
MONITORING) .................................................................. 17
Image Monitoring via the Internet (OUTSIDE MONITORING)
............................................................................................ 19
Send Still Images via E-mail upon Detection of Face or Movement
(DETECT/MAIL SETTING) ................................................ 23
Record and Send Videos via E-mail (VIDEO MAIL ATTN.) ... 24
Changing the Settings ........................................................... 26
Setting the Password (OUT MONITORING SET) .............. 28
Setting the UPnP of this Camera (OUT MONITORING SET)
........................................................................................ 28
Obtaining a Dynamic DNS (DDNS) Account ...................... 29
Setting Dynamic DNS (DDNS) on this Camera (OUT
MONITORING SET) ....................................................... 29
Setting the Sender’s E-mail Address .................................. 30
Registering the Recipient’s E-mail Address ....................... 33
Setting the Detection Method of this Camera (DETECT/MAIL
SETTING) ....................................................................... 34
Setting the Detection Interval of this Camera (DETECT/MAIL
SETTING) ....................................................................... 34
Setting Self Recording on this Camera (DETECT/MAIL
SETTING) ....................................................................... 35
Registering the Access Points to Connect (“ACCESS POINTS”
) ...................................................................................... 35
Setting the Password (DIRECT MONITORING) ................. 40
Setting the Enforced Group Owner (DIRECT MONITORING)
........................................................................................ 41
Checking the MAC Address of this Camera ....................... 41
Protecting the Network Settings with a Password .............. 42
Initializing the Network Settings ......................................... 42
Using Smartphone Applications ............................................. 43
Indications on the Screen ................................................... 43
Transferring Videos ............................................................ 44
Transferring Still Images .................................................... 45
Changing the Settings ........................................................ 47
Using the Wi-Fi Function from a Web Browser ...................... 49
Indications on the Screen ................................................... 49
Making Camera Settings from a Web Browser .................. 51
Troubleshooting ..................................................................... 56
Wi-Fi Specifications ............................................................... 59
Getting Started
Verifying the Accessories ...................................................... 61
Attaching the Core Filter ..................................................... 62
Charging the Battery Pack ..................................................... 63
Grip Adjustment ..................................................................... 64
Using as a Hand Strap ....................................................... 64
Inserting an SD Card ............................................................. 65
Types of Usable SD Card ................................................... 65
Using the Touch Screen ........................................................ 66
Names of Buttons and Functions on the LCD Monitor ....... 67
Clock Setting ......................................................................... 68
Resetting the Clock ............................................................ 69
Changing the Display Language ............................................ 70
Holding this Unit .................................................................... 70
Tripod Mounting .................................................................... 70
Using this Unit Overseas ....................................................... 71
Charging the Battery Pack Overseas ................................. 71
Setting the Clock to Local Time when Traveling ................. 71
Setting Daylight Saving Time ............................................. 72
Optional Accessories ............................................................. 72
Recording
Taking Videos in Auto Mode .................................................. 73
Zooming ............................................................................. 75
Capturing Still Images During Video Recording ................. 75
Taking Still Images in Auto Mode ........................................... 76
Zooming ............................................................................. 79
Manual Recording ................................................................. 79
Shooting According to Scene (Subject) ............................. 80
Adjusting Focus Manually .................................................. 82
Adjusting Brightness .......................................................... 83
Setting Shutter Speed ........................................................ 84
Setting Aperture ................................................................. 85
Setting White Balance ........................................................ 86
Setting Backlight Compensation ........................................ 87
Taking Close-up Shots ....................................................... 88
Recording with Effects ........................................................... 89
Recording with Animation Effects ...................................... 89
Recording with Face Decorations ...................................... 92
Recording with Decorative Stamps .................................... 93
Recording with Personal Handwriting ................................ 94
Capturing Subjects Clearly (TOUCH PRIORITY AE/AF) ....... 95
Capturing Smiles Automatically (SMILE SHOT) ................. 96
Capturing Pets Automatically (PET SHOT) ........................ 97
Recording while Displaying a Magnified View of a Selected
Face (FACE SUB-WINDOW) ......................................... 98
Registering Human Face Personal Authentication Information
.......................................................................................... 100
Setting SMILE%/NAME DISPLAY .................................... 102
Editing the Registered Face Information .......................... 103
Reducing Camera Shake ..................................................... 104
Slow-motion (High-speed) Recording .................................. 105
Recording at Intervals (TIME-LAPSE RECORDING) ........... 106
Recording Automatically by Sensing Movements (AUTO REC)
.......................................................................................... 107
Taking Group Shots (Self-timer) .......................................... 109
Recording Videos with Date and Time ................................. 111
Checking the Remaining Recording Time ........................... 112
Playback
Playing Back Videos ............................................................ 114
Checking the Recording Date and Other Information ....... 116
Checking the Content of Videos Quickly (Digest Playback)
...................................................................................... 116
Playing a Video with Defective Management Information . 117
Playing Back Still Images ..................................................... 118
Slideshow Playback ......................................................... 119
Searching for a Specific Video/Still Image by Date .............. 120
Connecting to and Viewing on TV ........................................ 120
Connecting via the HDMI Mini Connector ........................ 121
Connecting via the AV Connector .................................... 122
Playing Back Playlists .......................................................... 122
Playing Back a DVD or Blu-ray Disc Created on this Unit .... 123
Digest Playback on a Blu-ray or DVD Player .................... 123
Editing
Deleting Unwanted Files ...................................................... 124
Deleting the Currently Displayed File ............................... 124
Deleting Selected Files .................................................... 124
Protecting Files .................................................................... 125
2
Protecting/Releasing Protection of the Currently Displayed
File ................................................................................ 125
Protecting/Releasing Protection of Selected Files ............ 126
Capturing a Still Image in the Video During Playback .......... 127
Capturing a Required Part in the Video (TRIMMING) .......... 127
Capturing Videos for Uploading to YouTube ........................ 128
Creating Playlists from the Recorded Videos ....................... 130
Creating Playlists with Selected Files ............................... 130
Creating Playlists by Date ................................................ 131
Editing Playlists ................................................................ 132
Deleting Playlists .............................................................. 133
Copying
Creating Discs with a DVD Writer ........................................ 134
Preparing a DVD Writer (CU-VD3) ................................... 135
Preparing a DVD Writer (CU-VD50) ................................. 135
Creating a Disc ................................................................. 136
Playing Back with a DVD Writer ....................................... 140
Creating Discs with a BD Writer (External Blu-ray Drive) ..... 141
Preparing a BD Writer (External Blu-ray Drive) ................ 141
Creating a Disc ................................................................. 142
Playing Back with a BD Writer (External Blu-ray Drive) .... 147
Creating a Disc Using a Connected Blu-ray Recorder ......... 147
Dubbing Files to a Disc by Connecting to a DVD Recorder . 148
Dubbing Files to a VHS Tape by Connecting to a VCR ........ 148
Using a USB External Hard Disk Drive ................................ 149
Preparing a USB External Hard Disk Drive ....................... 149
Copying All Files .............................................................. 150
Playing Back Files in the USB External Hard Disk Drive .. 151
Deleting Folders in the USB External Hard Disk Drive ..... 151
Formatting the USB External Hard Disk Drive .................. 152
Importing Files from the USB External Hard Disk Drive .... 152
Copying to Windows PC ...................................................... 154
Verifying System Requirements (Guideline) ..................... 154
Installing the Provided Software ....................................... 155
Backing Up All Files ......................................................... 156
Organizing Files ............................................................... 157
Recording Videos to Discs ............................................... 158
Backing Up Files Without Using Provided Software ......... 159
List of Files and Folders ................................................... 161
Copying to Mac Computer ................................................... 162
Menu Settings
Operating the Menu ............................................................. 163
Operating the Shortcut Menu ........................................... 163
Operating the Main Menu ................................................. 164
Operating the Common Menu .......................................... 164
Recording Menu (Video) ...................................................... 165
INFO. ............................................................................... 167
SCENE SELECT .............................................................. 168
FOCUS ............................................................................ 168
BRIGHTNESS ADJUST ................................................... 168
SHUTTER SPEED ........................................................... 168
APERTURE PRIORITY .................................................... 168
WHITE BALANCE ............................................................ 168
BACKLIGHT COMP. ........................................................ 168
TELE MACRO .................................................................. 168
TOUCH PRIORITY AE/AF ............................................... 168
LIGHT .............................................................................. 168
GAIN UP .......................................................................... 169
WIND CUT ....................................................................... 169
ANIMATION EFFECT ...................................................... 169
DECORATE FACE EFFECT ............................................ 169
STAMP ............................................................................ 169
HANDWRITING EFFECT ................................................ 170
HIGH SPEED RECORDING ............................................ 170
TIME-LAPSE RECORDING ............................................. 170
AUTO REC ...................................................................... 170
Wi-Fi ................................................................................ 170
DATE/TIME RECORDING ............................................... 170
FACE SUB-WINDOW ...................................................... 170
SHUTTER MODE ............................................................ 170
SMILE SHOT ................................................................... 171
SMILE%/NAME DISPLAY ................................................ 171
FACE REGISTRATION .................................................... 171
PET SHOT ....................................................................... 171
VIDEO QUALITY .............................................................. 171
ZOOM .............................................................................. 172
x.v.Color ........................................................................... 173
ZOOM MIC ...................................................................... 173
Recording Menu (Still Image) .............................................. 174
SCENE SELECT .............................................................. 175
FOCUS ............................................................................ 175
BRIGHTNESS ADJUST ................................................... 175
SHUTTER SPEED ........................................................... 175
APERTURE PRIORITY .................................................... 175
WHITE BALANCE ............................................................ 175
BACKLIGHT COMP. ........................................................ 175
TELE MACRO .................................................................. 175
TOUCH PRIORITY AE/AF ............................................... 175
FLASH (GZ-VX705) ......................................................... 176
LIGHT (GZ-VX700) .......................................................... 176
SELF-TIMER .................................................................... 177
GAIN UP .......................................................................... 177
AUTO REC ...................................................................... 177
SHUTTER MODE ............................................................ 178
CONT. SHOOTING SPEED ............................................. 178
SMILE SHOT ................................................................... 179
SMILE%/NAME DISPLAY ................................................ 179
FACE REGISTRATION .................................................... 179
PET SHOT ....................................................................... 179
IMAGE SIZE ..................................................................... 179
Playback Menu (Video) ........................................................ 180
FILE INFORMATION ....................................................... 181
SEARCH DATE ................................................................ 181
DISPLAY DATE/TIME ...................................................... 181
DIGEST PLAYBACK ........................................................ 182
PLAYBACK PLAYLIST .................................................... 182
EDIT PLAYLIST ............................................................... 182
PROTECT/CANCEL ........................................................ 182
TRIMMING ....................................................................... 182
UPLOAD SETTINGS ....................................................... 182
PLAYBACK OTHER FILE ................................................ 182
K2 TECHNOLOGY .......................................................... 182
Playback Menu (Still Image) ................................................ 183
FILE INFORMATION ....................................................... 183
SEARCH DATE ................................................................ 183
SLIDE SHOW EFFECTS ................................................. 183
PROTECT/CANCEL ........................................................ 184
Common Menu .................................................................... 185
CLOCK ADJUST .............................................................. 187
DATE DISPLAY STYLE ................................................... 187
LANGUAGE ..................................................................... 187
MONITOR BRIGHTNESS ................................................ 187
OPERATION SOUND ...................................................... 188
SILENT MODE ................................................................. 188
AUTO POWER OFF ......................................................... 189
QUICK RESTART ............................................................ 189
DEMO MODE .................................................................. 190
TOUCH SCREEN ADJUST ............................................. 190
DISPLAY ON TV .............................................................. 191
VIDEO OUTPUT .............................................................. 192
HDMI OUTPUT ................................................................ 192
HDMI CONTROL ............................................................. 193
FACTORY PRESET ......................................................... 193
UPDATE .......................................................................... 193
FORMAT SD CARD ......................................................... 194
MOBILE USER GUIDE .................................................... 194
Names of Parts
Front .................................................................................... 195
Rear ..................................................................................... 195
3
Bottom ................................................................................. 196
Interior ................................................................................. 196
LCD Monitor ........................................................................ 197
Indications on the LCD monitor
Common Recording Indications .......................................... 198
Video Recording .................................................................. 198
Still Image Recording ........................................................... 199
Video Playback .................................................................... 199
Still Image Playback ............................................................ 200
Troubleshooting
When the unit is not working properly .................................. 200
Battery Pack ........................................................................ 201
Recording ............................................................................ 201
Card ..................................................................................... 202
Playback .............................................................................. 202
Editing/Copying ................................................................... 203
Computer ............................................................................. 203
Screen/Image ...................................................................... 204
Other Problems ................................................................... 204
Error Message? ................................................................... 205
Maintenance
Specifications
4
Charging
0
Refer to the operating instructions found in the animation on the Detailed
User Guide.
Recording
0
Refer to the operating instructions found in the animation on the Detailed
User Guide.
Playback
0
Refer to the operating instructions found in the animation on the Detailed
User Guide.
Shooting Tips
Basic Way to Hold a Camcorder
~ Recording Stable Images ~
Beginner’s Guide
o
[Getting Ready]
A Open your feet to the width of your shoulders.
B Extend your right hand and hold the camcorder over your head.
C Hold the LCD monitor with your left hand and adjust the angle
accordingly.
Caution :
0
Use this way of shooting only as a last resort as it is difficult to achieve
stable images.
0
Set to the wide angle as much as possible as the image will be prone to
camera shake.
0
Be considerate. Do not inconvenience the people around you.
Squatting and Shooting at Eye Level
This is the standard way of shooting while standing up.
Be sure to master this basic technique in order to achieve stable images.
o
[Getting Ready]
A Open your feet to the width of your shoulders.
B Keep the elbow of your right arm, which is holding the camcorder, close
to your side.
C Hold the LCD monitor with your left hand and adjust the angle
accordingly.
.
Extending Your Hands to Shoot
~ High-Angle Shooting ~
Staying low is a common position to take when shooting small children.
By recording from the eye level of the child, you can capture all his cute
expressions clearly.
o
[Getting Ready]
A Kneel down with your left knee while keeping your right foot on the
ground.
B Place the elbow of your right arm, which is holding the camcorder, on
your right knee.
C Hold the LCD monitor with your left hand and adjust the angle
accordingly.
.
Panning
0
Refer to the operating instructions found in the animation on the Detailed
User Guide.
Use this method to shoot a wide angle of view.
o
[Getting Ready]
A Shoot by rotating your body instead of moving your arms while keeping
the basic way of holding a camcorder as stated above.
B Stand facing the direction where the rotation will stop.
C Twist your upper body to the direction where recording will start.
D Press the start button and record for 2 seconds, then slowly twist back
your body to face the front.
Record for another 2 seconds while facing the front, then press the
stop button.
(The 90 degrees rotation should take about 5 seconds, giving the
feeling of a slow motion.)
Extend your hand when your subject is being hidden behind a crowd of
.
people.
5
Useful Shooting Techniques
Holiday Season/Christmas
Record the happy Christmas celebration with your family!
.
Decorating the Tree and Preparing the Dinner
The decoration of tree and preparation of dinner are part of the joy of
Christmas. Be sure to record these happy family times!
o
Decorating the tree
Recording the Christmas Party
.
After all preparations, it is finally the Christmas party itself.
Not only should you record the candle-blowing scene, but also the smiles of
the family while being surrounded by good food, or even the father who is
slightly drunk from champagne!
Finding the Presents
A tree is the most important thing to bring out the mood of Christmas.
.
Simply the scene of all family members engaging in the decorating of a fir
tree with various colorful ornaments is full of the feeling of happiness.
o
Preparing the Dinner
.
Record the scenes as everyone helps to prepare the feast of the night.
You can film the mother who is cooking, the children who are helping, and
of course, the process of making a cake!
For children, the greatest joy of Christmas is receiving presents the next
.
morning.
Their expression of delight when finding a present next to their pillow is a
recording opportunity not to be missed. Get ready to shoot before the
children wake up!
6
Useful Shooting Techniques
Wedding
Create an awesome wedding video for the bride and groom!
.
Discussing and Planning Before the Event
Before the day of the wedding reception, it is important to discuss with the
bride and groom about various details such as the order of the ceremony
and whether there are any entertainment programs or change of clothes.
By understanding the preferences of the bride and groom, you will be able
to shoot more appropriately.
o
Finding out the route of entrance
Recording the Expressions and Comments of Guests
o
Setting the shot from eye level to chest level
You can record comments from the guest by going around asking, "Please
say a few words for the bride and groom".
This can be done at the guests' waiting room, when the bride and groom are
changing, or during the entertainment programs.
.
The highlight of a wedding reception is the entrance of the bride and groom.
.
Find out which door they will enter from and the route they will take from the
person-in-charge of the wedding hall in advance. Set up the tripod at a place
where you can follow the couple using zoom without having to move around.
o
Number of times and timing of clothes-changing
Find out the timing of any changing of clothes so as to capture the scene well
when the bride and groom enter again.
You can also make use the time while the bride and groom are changing to
record comments of well wishes from the guests.
Finding the Right Angle to Capture Both Bride and Groom
o
Composing the picture with the guests in front and the
bride and groom at the back
The main characters of a wedding are of course the bride and groom. Record
their expressions clearly during the toast, speech, entertainment programs,
and other scenes.
Another recommendation is to capture the face shots of the guests, then pan
towards the groom. Picture composition containing the crowd of guests only
lacks fun, so be sure to pay attention to the shooting angle and size.
.
7
Useful Shooting Techniques
Advanced Operation with Two Camcorders
If video-editing is to be done, record using two camcorders so that a video
with varying scenes can be created. You can try asking a close friend who
has a camcorder at home.
Set the borrowed camcorder on a tripod to focus on taking close-up shots
of the bride and groom. In this way, the other camcorder can be moved
around to record other scenes, enabling an interesting video with changing
scenes to be created through editing and compilation.
As most people own at least a digital camera nowadays, even if you are really
unable to find an extra camcorder, inserting still pictures to the video at
various points is also a good way to add variety. Do give it a try!
o
<Camcorder 1>
Closing up on the bride and groom all the time
.
o
<Camcorder 2>
Recording the congratulatory messages from friends at the
same time
.
Travel
Capture all the good times of your domestic or overseas trips!
.
Bringing the Necessary Equipment
The necessary things to bring on a trip depends on your traveling purpose
and the destination.
For overseas trips in particular, you have to think about what to bring in
accordance to the local conditions.
Here are some suggestions for your consideration.
o
Camcorder
Think about how many hours of shooting you will usually perform in a day.
Be sure to prepare enough recording medium especially for long overseas
trips.
If you are recording in SD cards, get ready the sufficient number of cards,
including some for backup.
o
Battery Pack
Prepare a battery pack that is ready for double the expected recording time
in a day. For example, if you plan to record for 2 hours a day, prepare a
battery pack that is ready for 4 hours (actual recording time).
For a day trip, you can prepare a battery with low capacity but for a long trip,
do prepare a few batteries with high capacities.
o
AC Adapter
The JVC AC adapter supports voltages from 110 V to 240 V, and hence can
be used anywhere in the world.
Bring along the adapter if you are traveling for a long time. Charge the battery
pack while sleeping so that you can record with full battery power the next
day.
o
Power Plug Adapter
The shape of the power plug varies according to countries. Be sure to check
the shape of the power plug beforehand, and bring the appropriate power
plug adapter.
“Charging the Battery Pack Overseas” (A p. 71)
.
8
o
Tripod
Useful Shooting Techniques
Using Pan at the Places of Interest
Tourists spots with beautiful scenery or historical sites are places that you
would certainly want to record.
To capture the magnificence of a scene which cannot be fitted into a single
frame, try the panning technique.
Refer to “Shooting Tips” found in the “Beginner’s Guide” on this website on
how to use panning effectively.
In addition, you may also like to take a shot of the signs or monuments that
can often be found at the tourist spots.
A tripod is an essential item to take stable images. Select an appropriate
.
tripod in accordance to your purpose and style of traveling, such as a
compact one to be used on a table or one that is at least 1 m tall.
Recording the Excitement Before Departure
It may be a little abrupt to start your travel video at the destination suddenly.
Record also the preparations prior to departure if it is a family trip, or the time
when everyone is gathered at the meeting place if you are traveling with your
friends.
For overseas trips, taking a shot of the signs and displays at the airport of
the flight you are taking may be useful for future reference.
.
.
.
Showing Everyone Having a Good Time
When taking a video, it is rather dull to shoot only the scenery or historical
sites.
Talk about your feelings while recording the breath-taking scenery of an
attraction so that it will be an interesting scene to view later.
.
9
Useful Shooting Techniques
Amusement Park
Take more shots of the smiling faces of everyone in the family!
.
Taking Videos or Still Images According to the Attraction
You may choose to take videos all the time. However, you may want to take
some still images too.
The following section explains the scenarios suitable for taking videos or still
images.
o
Scenarios suitable for taking videos
Inducing Responses by Calling Out
.
Videos with no waving of hands nor laughter are not only dull when you view
them later, but also put the capability of the audio-recording function of the
camcorder to a waste.
When recording, induce more reactions by enthusiastically waving your
hands or shouting out "Is it fun?" and the like.
Capturing the Best Moment in a Video as a Still Image
.
Shots with the eyes closed are often taken by accident. To reduce such
mistakes, make use of the function to capture still images from videos.
As videos are actually continuous recording of 60 still images within 1 minute,
using this function allows you to select the best moment and save it as a still
image.
“Capturing a Still Image in the Video During Playback” (A p. 127)
Scenarios with changes in body movement are suitable for taking videos.
.
This includes situations where there are rapid changes in facial expressions
or voices of surprise and delight.
*Some amusement parks do not allow passengers to perform any recording.
Be sure to check beforehand.
[Examples]
0
Merry-go-round, go kart, coffee cup, etc.
o
Scenarios suitable for taking still images (photos)
.
Scenarios with little movement of the subject are suitable for taking still
images.
Try to take the still images from an angle such that the surroundings can be
seen clearly.
[Examples]
0
Carousal, ferris wheel, fun bicycle rides, etc.
Advanced Operation with Backlight Compensation
When the subject’s face is in backlight or when the expression cannot be
seen clearly, the Intelligent Auto function of this unit automatically increases
its brightness for recording.
If Intelligent Auto fails to function as expected or if the brightness correction
is insufficient, you can increase the brightness by using backlight
compensation in the Manual mode.
“Setting Details” (A p. 87)
o
<Without backlight compensation>
.
o
<With backlight compensation>
10
.
Wi-Fi Capabilities
This unit is equipped with Wi-Fi function.
You can do the following using a smartphone or computer via wireless connection.
Name of Function Capability
Using Wi-Fi
Direct Monitoring
GPS Recording
Outside Monitoring
Notification Mail
Video Mail
0
You can check the image on the camera via direct 1-to-1 connection (Wi-Fi Direct) with a smartphone (or
computer), without the need for an access point (wireless LAN router).
Recording of videos and still images may be performed while monitoring.
“Image Monitoring via Direct Connection (DIRECT MONITORING)” (A p. 13)
0
You can record the location information of the venue where recording is taking place via direct connection
(Wi-Fi Direct) with a smartphone.
The recorded location information can be used on the Everio MediaBrowser 4 software provided with this
unit.
“Recording the Location Information” (A p. 16)
0
You can check the image on the camera with a smartphone (or computer) via an access point at home
using wireless LAN router.
Recording of videos and still images may be performed while monitoring.
“Image Monitoring via an Access Point at Home (OUTSIDE MONITORING)” (A p. 17)
0
You can check the image on the camera via internet connection with a smartphone (or computer) while
you are outside.
Recording of videos and still images may be performed while monitoring.
“Image Monitoring via the Internet (OUTSIDE MONITORING)” (A p. 19)
0
A still image is automatically captured and sent via e-mail when faces or movements are detected by the
camera.
You can also set to record videos on the camera during detection.
“Send Still Images via E-mail upon Detection of Face or Movement (DETECT/MAIL SETTING)”
(A p. 23)
0
Videos of up to 15 seconds can be recorded and sent via e-mail.
“Record and Send Videos via E-mail (VIDEO MAIL ATTN.)” (A p. 24)
VIDEO TRANSFER・STILL IMAGE
TRANSFER
0
You can transfer recorded videos or still images using smartphone applications (or computer browsers).
Terms Used in this Guide：
0
In this guide, operations on the touch panel are described as “tap”.
0
While the names of the buttons on a smartphone are written as “MENU”
or “RETURN”, they may vary according to the smartphone in use.
Refer also to the instruction manual of your smartphone.
11
Using Wi-Fi
Operating Environment
To use the smartphone application “Everio sync.”, it is necessary to meet
the following requirements.
Android Smartphone
A OS: Android2.1 or higher
(This unit is not guaranteed to operate with all models.)
B Supports GPS function (for GPS recording)
C Able to connect to the internet or “Android Market™” (required for
software installation)
iPhone/iPad/iPod touch
A OS: iOS4.3.5 or higher
(This unit is not guaranteed to operate with all models.)
B Able to connect to the internet or “App Store™” (required for software
installation)
Computer
To check the image on the camera from a computer browser and to transfer
videos/still images, it is necessary to meet the following requirements.
A OS: Windows 7
B Supports wireless LAN or wired LAN
(For direct connections between the camera and computer, support
for wireless LAN is required.)
C Installation of Windows Media Player 12 or later
0
Confirmed operating environment:
Internet Explorer 9 or later
Caution :
0
There is no guarantee that the operations will work with all computer
environments. For example, the video download feature of mobile safari
browser, etc. is not supported.
Precautions on Using Wi-Fi
Cautions on Wi-Fi Function
0
Operation is not guaranteed on all devices.
0
This function is not designed for disaster or crime prevention.
0
To prevent the situation of forgetting to turn off the power, this unit will turn
off automatically after 10 days of continuous usage.
0
Communication may not be carried out properly near radio equipment or
broadcasting stations. In this case, change the location accordingly.
0
Radio wave interference by Bluetooth devices
Bluetooth devices make use of the same frequency bandwidth (2.4 GHz)
as that of Wi-Fi devices. Using this product near such devices may cause
radio wave interference, and result in a drop in communication speed or
connection failure. In this case, turn off the power of devices that are not
in use.
0
Security of Wireless LAN
An advantage of wireless LAN is that instead of using a LAN cable, it
transmits information using radio waves, thus enabling LAN connection
to be established within the area covered by the radio waves. However,
as radio waves penetrate through objects (such as walls) within the range
that they cover, security issues, such as interception of transmission or
illegal access, may arise if security settings are not configured.
Before you connect to the network in a wireless LAN environment, read
through the instruction manual for the wireless LAN device in use, and
configure the security settings accordingly. Failure to do so may increase
the risk of personal information being intercepted, such as user names,
passwords, and the content of your mails, or illegal access to the network.
0
Due to the design of wireless LAN, note that security may be breached by
unusual or unforeseeable means.
0
For more details on wireless LAN and network security, please consult the
manufacturer of your wireless LAN device.
0
JVC shall not be liable for any security issues, troubles, damages or losses
arising from the use of this feature.
Radio Waves Used by this Product
This product makes use of radio waves in the ISM band (2.4 GHz).
Although a radio station license is not required for using this product, please
take note of the following.
o
Do not use this product near the following places.
0
Industrial, scientific, or medical equipment, such as microwave ovens and
pacemakers
0
Specified low-power radio stations (radio station license not required)
0
Bluetooth devices
Equipment such as the above mentioned devices makes use of the same
frequency bandwidth as that of Wi-Fi.
Using this product near the above equipment may cause radio wave
interference, and result in communication failure or a drop in communication
speed.
o
Avoid using this product near a TV or radio set.
TV or radio sets make use of a radio wave frequency bandwidth that is
different from that of Wi-Fi, and therefore has no effect on communication
by this product or the TV/radio set.
However, when a TV/radio set is placed close to a Wi-Fi product,
electromagnetic waves emitted by the Wi-Fi product may cause noise to
occur in the sound or images of the TV/radio.
o
Radio signals are unable to penetrate through reinforced
steel, metal, or concrete.
The radio waves used by this product are unable to penetrate through
reinforced steel, metal, or concrete materials.
It may difficult for communication to be established if two rooms or floors are
separated by these materials.
*Communication may also get weaker when there are human subjects or
parts of the body in between the Wi-Fi devices.
o
Do not connect to wireless networks that you do not have
authorization for.
Once connected, it may be considered as unauthorized access and legal
actions can be taken against you.
12
o
REC
≪PLAY
MENU
Do not use the Wi-Fi function outside the country of
purchase.
Depending on the country, there may be restrictions on the use of radio
waves and any violations could be punishable by law.
Exporting/Bringing the Unit Overseas
Permission from the U.S. government may be required when bringing the
unit to an export controlled country set by the U.S. government (such as
Cuba, Iraq, North Korea, Iran, Rwanda, and Syria. As of November, 2011).
For more information, consult the U.S. Embassy Commercial Service.
Using Wi-Fi
Image Monitoring via Direct Connection (DIRECT MONITORING)
You can check the image on the camera via direct connection (Wi-Fi Direct)
with a smartphone (or computer), without the need for an access point
(wireless LAN router).
0
Recording of videos and still images may be performed while monitoring.
.
Caution :
0
This function is not designed for disaster or crime prevention.
0
To prevent the situation of forgetting to turn off the power, this unit will turn
off automatically after 10 days of continuous usage.
0
When not monitoring from a smartphone (or computer), the focus of the
camera is fixed.
0
Recording stops when the smartphone (or computer) is disconnected.
0
Even when monitoring from a smartphone (or computer), the focus of the
camera will be fixed if not operated for more than 3 hours. (Focus works
again when the camera is operated.)
0
You may have difficulty establishing a connection via direct monitoring in
an environment where the camera is placed away from the smartphone
(or computer). In this case, connect using the access point (wireless LAN
router).
“Image Monitoring via an Access Point at Home (OUTSIDE MONITORING)”
(A p. 17)
What You Need
0
Smartphone or Windows computer
(A wireless LAN that is compatible with WPA2 is necessary.)
Necessary Settings
To operate, it is necessary to connect a smartphone (or computer) to the
camera.
There are 2 ways to connect, namely “Wi-Fi Protected Setup (WPS)” and
“Search and Connect”.
Select the appropriate method of connection according to the device.
o
Wi-Fi Protected Setup (WPS)
1
Tap “MENU”.
(Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “DIRECT MONITORING” (S) in the shortcut menu.
(Operation on this camera)
3
Tap “WPS”.
(Operation on this camera)
13
********************************
WPSSTOP
PASS:********************************
SSID:********************************
CONNECTING
DIRECT MONITORING
CONTROLLED BY REMOTE
CAMERA NETWORK INFO.
CAMERA OPERATION
STOP
CURRENTLY BEING
DIRECT MONITORING
REC
≪PLAY
MENU
MENU
WPSQUIT
********************************
PASS:********************************
SSID:********************************
CONNECTING
DIRECT MONITORING
CONTROLLED BY REMOTE
CURRENTLY BEING
CAMERA NETWORK INFO.
CAMERA OPERATION
QUIT
DIRECT MONITORING
Using Wi-Fi
.
4
Activate WPS on the smartphone (or computer) within 2 minutes.
(Operation on the smartphone (or computer))
0
To activate WPS, refer to the instruction manual of the device in use.
5
A connection is established and Q appears on the camera’s screen.
.
o
Search and Connect
1
Tap “MENU”.
(Operation on this camera)
.
.
0
The shortcut menu appears.
2
Tap “DIRECT MONITORING” (S) in the shortcut menu.
(Operation on this camera)
.
3
Check the SSID and PASS shown on the camera’s screen, then add the
smartphone (or computer) to connect.
(Operation on the smartphone (or computer))
.
0
For details on connecting your smartphone (or computer) to a Wi-Fi
network, please refer to the instruction manual of the phone terminal
in use.
4
A connection is established and Q appears on the camera’s screen.
14
Operation Method
CONTROLLED BY REMOTE
CURRENTLY BEING
CAMERA NETWORK INFO.
CAMERA OPERATION
QUIT
DIRECT MONITORING
o
Smartphone (Android / iPhone)
Memo :
0
It is necessary to install the application on the smartphone.
“Installing Smartphone Applications” (A p. 43)
1
Start “Everio Sync.” on the smartphone after setting direct monitoring.
.
2
The smartphone starts to search for the camera automatically.
Using Wi-Fi
.
0
The URL for the computer to connect to appears.
2
Check the URL.
(Adds network information screen.)
0
After checking the URL, tap “QUIT” to return to the previous screen.
3
Start Internet Explorer (web browser) on the computer and enter the
URL.
0
Using the Wi-Fi function from the web browser
“Using the Wi-Fi Function from a Web Browser” (A p. 49)
0
To end operations, tap “STOP”.
.
0
Once the camera is found, it will be connected.
3
A connection is established.
(Adds application screen on the smartphone.)
0
Tap “CAMERA OPERATION” on the camera to enable operations
from it.
When operating from the camera, tap J on the camera to enable
operations from the smartphone application.
0
Using smartphone applications
“Using Smartphone Applications” (A p. 43)
0
To end operations, tap “STOP”.
o
Computer (Windows 7)
1
Tap “CAMERA NETWORK INFO.” after setting direct monitoring.
(Operation on this camera)
15
GPS
REC
≪PLAY
MENU
MENU
WPSQUIT
********************************
PASS:********************************
SSID:********************************
CONNECTING
DIRECT MONITORING
REC
≪PLAY
MENU
MENU
WPSQUIT
********************************
PASS:********************************
SSID:********************************
CONNECTING
DIRECT MONITORING
Using Wi-Fi
Recording the Location Information
You can record the location information of the venue where recording is
taking place via direct connection (Wi-Fi Direct) with a smartphone.
.
Memo :
0
To obtain the location information, it is necessary to start the smartphone
application and connect it to the camera.
Also, setting the “LOC INFO TRANS INT” for the smartphone application
is necessary.
“Using Smartphone Applications” (A p. 43)
0
Activate the GPS function of the smartphone in advance.
0
The recorded location information can be used on the software provided
with this unit.
For more information, refer to “MediaBrowser Help”.
What You Need
0
Smartphone
.
4
Activate WPS on the smartphone within 2 minutes.
(Operation on the smartphone)
0
To activate WPS, refer to the instruction manual of the device in use.
0
A connection is established and Q appears on the camera’s screen.
o
Search and Connect
1
Tap “MENU”.
(Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “DIRECT MONITORING” (S) in the shortcut menu.
(Operation on this camera)
Necessary Settings
To operate, it is necessary to connect a smartphone to the camera.
There are 2 ways to connect, namely “Wi-Fi Protected Setup (WPS)” and
“Search and Connect”.
Select the appropriate method of connection according to the device.
o
Wi-Fi Protected Setup (WPS)
1
Tap “MENU”.
(Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “DIRECT MONITORING” (S) in the shortcut menu.
(Operation on this camera)
.
3
Check the SSID and PASS shown on the camera’s screen, then register
them on the smartphone to connect.
(Operation on the smartphone)
.
0
A connection is established and Q appears on the camera’s screen.
0
For details on connecting your smartphone to a Wi-Fi network, please
refer to the instruction manual of the phone terminal in use.
.
3
Tap “WPS”.
(Operation on this camera)
16
CONTROLLED BY REMOTE
CURRENTLY BEING
CAMERA NETWORK INFO.
CAMERA OPERATION
QUIT
DIRECT MONITORING
11:00AM
Using Wi-Fi
Operation Method
1
Tap “CAMERA OPERATION” after setting direct monitoring.
(Operation on this camera)
.
0
The recording mode starts on this camera.
2
Activate the GPS function of the smartphone and start the application
on it.
(Check the “LOC INFO TRANS INT”)
“Using Smartphone Applications” (A p. 43)
3
Start recording.
(Operation on this camera)
.
Image Monitoring via an Access Point at Home (OUTSIDE MONITORING)
You can check the image on the camera with a smartphone (or computer)
via an access point at home using wireless LAN router.
0
Recording of videos and still images may be performed while monitoring.
.
Caution :
0
This function is not designed for disaster or crime prevention.
0
To prevent the situation of forgetting to turn off the power, this unit will turn
off automatically after 10 days of continuous usage.
0
When not monitoring from a smartphone (or computer), the focus of the
camera is fixed.
0
Recording stops when the smartphone (or computer) is disconnected.
0
Even when monitoring from a smartphone (or computer), the focus of the
camera will be fixed if not operated for more than 3 hours. (Focus works
again when the camera is operated.)
.
.
.
0
Z appears on the camera’s screen.
0
Tap J to return to the previous screen.
0
To end operations, tap “STOP”.
Memo :
0
Manual recording cannot be performed.
0
It is not possible to switch to the playback mode.
0
When operations from this unit are enabled, operations from the
smartphone do not work. To operate from a smartphone, tap J.
What You Need
0
Smartphone or Windows computer
0
Wireless LAN router (use a product that has a Wi-Fi certification logo)
Memo :
0
Depending on the wireless LAN router in use and signal strength, you may
experience connection problems or slow connections.
Necessary Settings
0
To operate, it is necessary to register the access point (wireless LAN
router) for the camera to connect to.
“Registering the Access Points to Connect (“ACCESS POINTS”)”
(A p. 35)
0
In addition, it is also necessary to connect the smartphone (or computer)
to the access point in advance.
*The above settings are not necessary if they have already been set for other
functions.
0
For details on connecting your smartphone (or computer) to a Wi-Fi
network, please refer to the instruction manual of the phone terminal in
use.
17
REC
≪PLAY
MENU
MENU
OUTSIDE MONITORING
Wi-Fi
Using Wi-Fi
Operation Method
o
Smartphone (Android / iPhone)
Memo :
0
It is necessary to install the application on the smartphone.
“Installing Smartphone Applications” (A p. 43)
1
Tap “MENU”.
(Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu.
(Operation on this camera)
.
3
Tap “OUTSIDE MONITORING”.
(Operation on this camera)
.
4
Start “Everio Sync.” on the smartphone.
.
5
The smartphone starts to search for the camera automatically.
.
0
If the camera cannot be found, enter the URL (LAN) displayed in
“CAMERA NETWORK INFO.” directly.
To display “CAMERA NETWORK INFO.”, refer to “Computer
(Windows 7)”.
6
Log in with your username and password.
(if authentication cannot be achieved)
18
.
0
The username is “everio” and the default password is “0000”.
“Changing the Settings” (A p. 27)
0
Using smartphone applications
“Using Smartphone Applications” (A p. 43)
0
To end operations, tap “STOP”.
o
Computer (Windows 7)
1
Tap “MENU”.
(Operation on this camera)
.
REC
≪PLAY
MENU
MENU
OUTSIDE MONITORING
Wi-Fi
CAMERA NETWORK INFO.
QUIT
CONTROLLED BY REMOTE
CURRENTLY BEING
OUTSIDE MONITORING
QUIT
CAMERA NETWORK INFO.
URL(LAN):http://***************
***************/
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu.
(Operation on this camera)
.
3
Tap “OUTSIDE MONITORING”.
(Operation on this camera)
.
4
Tap “CAMERA NETWORK INFO.”.
(Operation on this camera)
.
0
The URL (LAN) for the computer to connect to appears.
5
Check the URL (LAN).
Using Wi-Fi
Image Monitoring via the Internet (OUTSIDE MONITORING)
You can check the image on the camera via internet connection with a
smartphone (or computer).
*Connection to the internet is established via a wireless LAN router.
0
Recording of videos and still images may be performed while monitoring.
.
Caution :
0
Too much usage may cause high communication fees to be incurred, and
there may be a limit to the volume of communication. For more details,
please check your Internet or smartphone subscription.
0
If the network connection is slow, video images may appear jumpy, or
audio sound may be interrupted or delayed.
0
This function is not designed for disaster or crime prevention.
0
To prevent the situation of forgetting to turn off the power, this unit will turn
off automatically after 10 days of continuous usage.
0
When not monitoring from a smartphone (or computer), the focus of the
camera is fixed.
0
Recording stops when the smartphone (or computer) is disconnected.
0
Even when monitoring from a smartphone (or computer), the focus of the
camera will be fixed if not operated for more than 3 hours. (Focus works
again when the camera is operated.)
0
To monitor images while you are out, make sure in advance that you can
establish a connection via the Internet by entering the URL (WAN)
displayed in “Network Information”.
However, you cannot monitor (operate) in the same way as while you are
out when your smartphone (or computer) is connected to a home network
via Wi-Fi.
0
Start using after changing the password.
If the password is not changed, there is a high risk of unauthorized access
from others.
Also, avoid using easily guessable passwords, such as birth dates.
You are recommended to change your password periodically.
“Setting the Password (OUT MONITORING SET)” (A p. 28)
0
There is no guarantee that the operations will work with all computer
environments. For example, the video download feature of mobile safari
browser, etc. is not supported.
.
0
After checking the URL, tap “QUIT” to return to the previous screen.
6
Start Internet Explorer (web browser) on the computer and enter the
URL.
7
Log in with your username and password.
0
The username is “everio” and the default password is “0000”.
“Changing the Settings” (A p. 27)
0
Using the Wi-Fi function from the web browser
“Using the Wi-Fi Function from a Web Browser” (A p. 49)
0
To end operations, tap “STOP”.
Setting Multiple Cameras in the Same Network：
Take note of the following.
0
When UPnP is in use, cameras that are connected to the network later will
be connected via the internet.
0
To set up multiple cameras, you need to fix the IP address for each of the
cameras (configure the LAN settings of the access point manually). In
addition, it is also necessary to perform settings of the wireless LAN router
in use manually. (For setting details, refer to the instruction manual of the
wireless LAN router in use.)
“Editing LAN Settings of Access Points (Wireless LAN Router)”
(A p. 39)
19
REC
≪PLAY
MENU
MENU
OUTSIDE MONITORING
Wi-Fi
CAMERA NETWORK INFO.
QUIT
CONTROLLED BY REMOTE
CURRENTLY BEING
OUTSIDE MONITORING
URL(LAN):http://***************
***************/
QUIT
***************/
URL(WAN):http://***************
CAMERA NETWORK INFO.
Using Wi-Fi
What You Need
0
Smartphone or Windows computer
0
Wireless LAN router that supports UPnP (use a product that has a Wi-Fi
certification logo)
To check whether UPnP is supported, please refer to the instruction manual
of the wireless LAN router in use.
0
Internet connection with an obtainable global IP address
Memo :
0
Depending on the wireless LAN router in use and signal strength, you may
experience connection problems or slow connections.
Necessary Settings
To operate, it is necessary to connect the camera to the internet via an
access point (UPnP compatible wireless LAN router) in the house. As such,
the following settings are required.
*The above settings are not necessary if they have already been set for other
functions.
0
Registering an access point
“Registering the Access Points to Connect (“ACCESS POINTS”)”
(A p. 35)
0
Obtaining a dynamic DNS account
“Obtaining a Dynamic DNS (DDNS) Account” (A p. 29)
0
Setting the account on this camera
“Setting Dynamic DNS (DDNS) on this Camera (OUT MONITORING SET)”
(A p. 29)
Caution :
0
Even if registration is done correctly to the camera, access may be
temporarily unavailable such as when the dynamic DNS server is down.
To check whether the dynamic DNS server is working properly, access
and check the DDNS server with a computer, etc.
Operation Method
o
Smartphone (Android / iPhone)
Memo :
0
It is necessary to install the application on the smartphone.
“Installing Smartphone Applications” (A p. 43)
1
Tap “MENU”.
(Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu.
(Operation on this camera)
.
3
Tap “OUTSIDE MONITORING”.
(Operation on this camera)
20
.
4
Tap “CAMERA NETWORK INFO.”.
(Operation on this camera)
.
0
The URL (WAN) for the smartphone to connect to appears.
(Does not appear if DDNS is not set or set incorrectly.)
0
[LUPnP] is displayed when UPnP cannot be used.
5
Check the URL (WAN).
.
0
After checking the URL, tap “QUIT” to return to the previous screen.
6
Start “Everio Sync.” on the smartphone.
Using Wi-Fi
.
7
Enter the confirmed URL (WAN) directly.
“Changing the Settings” (
0
Using smartphone applications
A p. 27)
“Using Smartphone Applications” (A p. 43)
0
To end operations, tap “STOP”.
.
8
Log in with your username and password.
(if authentication cannot be achieved)
.
0
The username is “everio” and the default password is “0000”.
21
REC
≪PLAY
MENU
MENU
OUTSIDE MONITORING
Wi-Fi
CAMERA NETWORK INFO.
QUIT
CONTROLLED BY REMOTE
CURRENTLY BEING
OUTSIDE MONITORING
URL(LAN):http://***************
***************/
QUIT
***************/
URL(WAN):http://***************
CAMERA NETWORK INFO.
Using Wi-Fi
o
Computer (Windows 7)
1
Tap “MENU”.
(Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu.
(Operation on this camera)
.
3
Tap “OUTSIDE MONITORING”.
(Operation on this camera)
0
To end operations, tap “STOP”.
.
4
Tap “CAMERA NETWORK INFO.”.
(Operation on this camera)
.
0
The URL (WAN) for the computer to connect to appears.
(Does not appear if DDNS is not set or set incorrectly.)
5
Check the URL (WAN).
.
0
After checking the URL, tap “QUIT” to return to the previous screen.
6
Start Internet Explorer (web browser) on the computer and enter the
URL.
7
Log in with your username and password.
0
The username is “everio” and the default password is “0000”.
“Changing the Settings” (A p. 27)
0
Using the Wi-Fi function from the web browser
“Using the Wi-Fi Function from a Web Browser” (A p. 49)
22
Send Still Images via E-mail upon Detection
REC
≪PLAY
MENU
MENU
DETECT/MAIL SETTING
Wi-Fi
RECIPIENT'S EMAIL
DETECT/MAIL SETTING
SET
RECIPIENT'S EMAIL
of Face or Movement (DETECT/MAIL
SETTING)
Using Wi-Fi
.
Memo :
0
The size of the still image that is captured in “DETECT/MAIL SETTING” is
640 x 360.
0
Operation via connection to a smartphone (or computer) using “OUTSIDE
MONITORING” may be performed even during detection standby.
0
When the camera is connected to a smartphone (or computer), “DETECT/
MAIL SETTING” will be temporarily unavailable.
0
You can set to record videos on this unit automatically during detection.
“Recording on this unit” (A p. 27)
0
To prevent too many e-mails from being sent in case of detections
occurring frequently, you can set the interval of e-mail delivery.
“Setting detection interval” (A p. 27)
Caution :
0
This function is not designed for disaster or crime prevention.
0
To prevent the situation of forgetting to turn off the power, this unit will turn
off automatically after 10 days of continuous usage.
0
While on standby for notification mails, the focus is fixed. Perform the
camera settings first, then enable notification mails.
Focus may not be set correctly if the notification mails start before camera
settings are made. In this case, disable notification mails temporarily, then
enable it again.
0
Be careful not to cause too much sending of e-mails. Depending on the
internet provider that provides the e-mail service, the e-mails may be
marked as spam or the usage limited may be exceeded.
Be sure to check the terms of the internet provider in advance to find out
if there are any restrictions on the number or size of e-mails that can be
sent.
0
When setting another person as the recipient, be sure to obtain his/her
consent in advance.
0
If you reply to the received e-mail by using this unit, the receiver can not
check your replied e-mail by using this unit.
Check the e-mails sent by this unit from computer, etc.
0
JVC will not be responsible for any trouble that occurs upon the sending
of mails.
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu.
(Operation on this camera)
.
3
Tap “DETECT/MAIL SETTING”.
(Operation on this camera)
.
4
Tap “RECIPIENT'S EMAIL”.
(Operation on this camera)
What You Need
0
Wireless LAN router (use a product that has a Wi-Fi certification logo)
0
Internet connection
0
Account for sending e-mails (Supports SMTP. E-mail services that is only
accessible from the web cannot be used.)
Necessary Settings
To send e-mails, the following settings are required.
*The above settings are not necessary if they have already been set for other
functions.
0
Registering an access point
“Registering the Access Points to Connect (“ACCESS POINTS”)”
(A p. 35)
0
Setting the account for sending e-mails
“Setting the Sender’s E-mail Address” (A p. 30)
0
Registering the recipient’s e-mail address
“Registering the Recipient’s E-mail Address” (A p. 33)
o
Selecting the Recipient’s E-mail Address
1
Tap “MENU”.
(Operation on this camera)
.
5
Tap the e-mail address to be set as recipient.
(Operation on this camera)
.
0
An icon a appears beside the recipient’s e-mail address.
0
After setting, tap “SET”.
0
Settings will not be saved until “SET” is tapped.
23
REC
≪PLAY
MENU
MENU
DETECT/MAIL
Wi-Fi
Using Wi-Fi
Operation Method
1
Set up the camera at the recording location.
2
Tap “MENU”.
(Operation on this camera)
.
0
The shortcut menu appears.
3
Tap “Wi-Fi” (Q) in the shortcut menu.
(Operation on this camera)
.
4
Tap “DETECT/MAIL”.
(Operation on this camera)
.
0
Images are captured automatically when moving subjects or human
faces appear on the camera’s screen. (The PHOTO icon appears on
the screen upon detection.)
“Changing the Settings” (A p. 27)
0
The captured still images will be sent via e-mail to the selected
recipients.
Record and Send Videos via E-mail (VIDEO MAIL ATTN.)
Videos of up to 15 seconds can be recorded and sent via e-mail.
With this function, short videos can be delivered easily even on a daily basis,
such as to show the growing up of small children to their distant
grandparents.
.
Memo :
0
Specifications of the videos sent via video mail are as follows:
System: MP4
Video:
- H.264/MPEG-4 AVC baseline profile codec
- 640 x 360 resolution
- 30p frame rate
- 1 Mbps bit rate
Audio:
- Advanced Audio Coding (AAC) system
- 48 kHz sampling rate
- 16 bit
- 2 channels
Caution :
0
Be careful not to cause too much sending of e-mails. Depending on the
internet provider that provides the e-mail service, the e-mails may be
marked as spam or the usage limited may be exceeded.
Be sure to check the terms of the internet provider in advance to find out
if there are any restrictions on the number or size of e-mails that can be
sent.
0
When setting another person as the recipient, be sure to obtain his/her
consent in advance.
0
Depending on the e-mail service provider, the sending of video mail may
not be supported.
0
Too much usage may cause high communication fees to be incurred, and
there may be a limit to the volume of communication. For more details,
please check your Internet or smartphone subscription.
0
If you reply to the received e-mail by using this unit, the receiver can not
check your replied e-mail by using this unit.
Check the e-mails sent by this unit from computer, etc.
0
JVC will not be responsible for any trouble that occurs upon the sending
of mails.
0
Videos captured via video mail are not saved to the camera or SD card.
0
Videos that have already been captured cannot be sent.
24
What You Need
0
Wireless LAN router (use a product that has a Wi-Fi certification logo)
0
Internet connection
0
Account for sending e-mails (Supports SMTP. E-mail services that is only
accessible from the web cannot be used.)
REC
≪PLAY
MENU
MENU
VIDEO MAIL ATTN.
Wi-Fi
SET
VIDEO MAIL ATTN.
REC
≪PLAY
MENU
MENU
REC
0:00:15
VIDEO MAIL
Using Wi-Fi
Necessary Settings
To send e-mails, the following settings are required.
*The above settings are not necessary if they have already been set for other
functions.
0
Registering an access point
“Registering the Access Points to Connect (“ACCESS POINTS”)”
(A p. 35)
0
Setting the account for sending e-mails
“Setting the Sender’s E-mail Address” (A p. 30)
0
Registering the recipient’s e-mail address
“Registering the Recipient’s E-mail Address” (A p. 33)
o
Selecting the Recipient’s E-mail Address
1
Tap “MENU”.
(Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu.
(Operation on this camera)
Operation Method
1
Tap “MENU”.
(Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “VIDEO MAIL” (R) in the shortcut menu.
(Operation on this camera)
.
3
Start recording.
.
3
Tap “VIDEO MAIL ATTN.”.
(Operation on this camera)
.
4
Tap the e-mail address to be set as recipient.
(Operation on this camera)
.
.
.
0
Recording starts after the countdown (5 seconds).
0
0
0
.
An icon a appears beside the recipient’s e-mail address.
After setting, tap “SET”.
Settings will not be saved until “SET” is tapped.
.
0
You can allow the recording to be performed for 15 seconds or press
the START/STOP button to stop.
4
Tap “SEND”.
(Operation on this camera)
25
PLAY TO CHECK
STOP
SEND
SEND THIS VIDEO?
VIDEO MAIL
Using Wi-Fi
.
0
Sending of the video mail starts.
0
To check the file, tap “PLAY TO CHECK”.
0
When it is complete, tap “OK”.
Changing the Settings
To use the Wi-Fi function, it may be necessary to perform some settings on
the camera and smartphone (or computer).
0
Registering the access points to connect (wireless LAN router)
“Registering the Access Points to Connect (“ACCESS POINTS”)”
(A p. 35)
0
Obtaining a dynamic DNS account
“Obtaining a Dynamic DNS (DDNS) Account” (A p. 29)
0
Setting the account on this camera
“Setting Dynamic DNS (DDNS) on this Camera (OUT MONITORING SET)”
(A p. 29)
0
Setting the sender’s e-mail address
“Setting the Sender’s E-mail Address” (A p. 30)
0
Registering the recipient’s e-mail address
“Registering the Recipient’s E-mail Address” (A p. 33)
26
Menu Settings
Setting Details
OUT MONITORING SET Configures various settings related to outside monitoring.
0
PASSWORD (Default: “0000”)
Selects the password to access the camera.
“Setting the Password (OUT MONITORING SET)” (A p. 28)
0
UPnP (Default: “ON”)
Sets the UPnP of the camera.
・OFF: Disables UPnP.
・ON: Enables UPnP.
“Setting the UPnP of this Camera (OUT MONITORING SET)” (A p. 28)
0
DDNS SETTING
Configures various settings related to DDNS.
“Setting Dynamic DNS (DDNS) on this Camera (OUT MONITORING SET)” (A p. 29)
Using Wi-Fi
VIDEO MAIL ATTN. Selects the recipient’s e-mail address for video mails.
DETECT/MAIL SETTING Configures various settings related to notification mails.
NETWORK SETTINGS Configures various settings related to the network.
“Record and Send Videos via E-mail (VIDEO MAIL ATTN.)” (A p. 25)
0
RECIPIENT'S EMAIL
Selects the recipient’s e-mail address for notification mails.
“Registering the Recipient’s E-mail Address” (A p. 33)
0
DETECTION METHOD (Default: “MOTION DETECTION”)
Sets the detection method to start recording.
・MOTION DETECTION: Starts recording upon detection of subject’s movements.
・FACE DETECTION: Starts recording upon detection of human faces.
“Setting the Detection Method of this Camera (DETECT/MAIL SETTING)” (A p. 34)
0
DETECTION INTERVAL (Default: “10 minutes”)
Sets the time period to enable detection again after the previous one.
“Setting the Detection Interval of this Camera (DETECT/MAIL SETTING)” (A p. 34)
0
SELF RECORDING (Default: “ON”)
Sets whether to record videos on this camera during detection.
・OFF: Does not record videos on this camera.
・ON: Records videos on this camera.
“Setting Self Recording on this Camera (DETECT/MAIL SETTING)” (A p. 35)
0
ACCESS POINTS
Adds, deletes, or perform LAN settings of access points (wireless LAN router).
“Registering the Access Points to Connect (“ACCESS POINTS”)” (A p. 35)
0
Wi-Fi DIRECT SETTING
Configures various settings related to direct monitoring.
・PASSWORD
Sets the password for direct monitoring.
ENFORCED GROUP OWNER (Default: “ON”)
Sets whether to enforce authorization of the group owner.
・OFF: Set this if connection to devices that support Wi-Fi Direct fails. (When set to OFF, connection to
devices that do not support Wi-Fi Direct will be disabled.)
・ON: It is recommended to set this usually.
“Setting the Password (DIRECT MONITORING)” (A p. 40)
“Setting the Enforced Group Owner (DIRECT MONITORING)” (A p. 41)
0
MAIL SETTING
Sets the e-mail addresses of the sender and recipient.
“Setting the Sender’s E-mail Address” (A p. 30)
“Registering the Recipient’s E-mail Address” (A p. 33)
0
MAC ADDRESS
Displays the MAC address of the camera.
(The above shows the MAC address when connected to an access point, while the below shows the
address during direct connection.)
“Checking the MAC Address of this Camera” (A p. 41)
0
SET FROM WEB BROWSER
Enables configuration of the camera settings from a web browser.
“Using the Wi-Fi Function from a Web Browser” (A p. 49)
0
LOCK SETTINGS
Sets a password to prevent others from seeing the network settings.
“Protecting the Network Settings with a Password” (A p. 42)
0
INITIALIZATION
Returns the network settings to their default values.
“Initializing the Network Settings” (A p. 42)
27
REC
≪PLAY
MENU
MENU
OUT MONITORING SET
Wi-Fi
OUT MONITORING SET
PASSWORD
SET
DELETE
PASSWORD
SET
CANCEL
REC
≪PLAY
MENU
MENU
OUT MONITORING SET
Wi-Fi
SET
UPnP
OUT MONITORING SET
Using Wi-Fi
Setting the Password (OUT MONITORING SET)
Sets the password to access the camera. (Not more than 8 characters)
1
Tap “MENU”.
(Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu.
(Operation on this camera)
.
3
Tap “OUT MONITORING SET”.
(Operation on this camera)
Setting the UPnP of this Camera (OUT MONITORING SET)
Sets the UPnP of the camera.
1
Tap “MENU”.
(Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu.
(Operation on this camera)
.
3
Tap “OUT MONITORING SET”.
(Operation on this camera)
4
Tap “PASSWORD”.
(Operation on this camera)
5
Enter the password.
(Operation on this camera)
0
Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0
Tap “DELETE” to delete a character.
0
Tap “CANCEL” to exit.
0
Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0
Tap E or F to move one space to the left or right.
0
After setting, tap “SET”.
.
4
Tap “UPnP”.
.
(Operation on this camera)
.
0
0
0
0
.
.
Tap “ON” or “OFF”.
Select “ON” to enable UPnP.
Select “OFF” to disable UPnP.
After setting, tap “SET”.
28
REC
≪PLAY
MENU
MENU
OUT MONITORING SET
Wi-Fi
OUT MONITORING SET
DDNS SETTING
SET
ON
DOMAIN NAME
PASSWORD
USERNAME
STREAM SERVER SETTING
DDNS
Using Wi-Fi
Obtaining a Dynamic DNS (DDNS) Account
By obtaining a dynamic DNS account, this unit may be used on the web as
usual even if the IP address changes when it is connected to the internet.
0
Only the JVC dynamic DNS service can be set on this camera.
To obtain (register) an account, perform the following steps.
1
Access the following URL and register for an account.
(Operation on a computer or smartphone)
https://dd3.jvckenwood.com/user/
Set your e-mail address as the username.
2
Check that you have received a confirmation e-mail to the address used
in registration, and access the URL stated in the e-mail.
(Operation on a computer or smartphone)
3
Set the username and password used in registration on the camera.
(Operation on this camera)
“Setting Dynamic DNS (DDNS) on this Camera (OUT MONITORING
SET)” (A p. 29)
4
Execute “OUTSIDE MONITORING”.
(Operation on this camera)
If “OUTSIDE MONITORING” is executed while dynamic DNS settings
are enabled, the camera will access the dynamic DNS server.
5
Tap “CAMERA NETWORK INFO.” to check that the URL (WAN) is
displayed.
(Registration complete)
“Image Monitoring via the Internet (OUTSIDE MONITORING)”
(A p. 19)
Caution :
0
Registration will be canceled if you do not access the dynamic DNS server
from the camera within 3 days.
Perform the registration again in this case.
0
Registration will not be complete if the username and password set on this
camera are incorrect. Be sure to check that they are correct.
0
Successful registration will be canceled too if you do not access the
dynamic DNS server for 1 year.
Setting Dynamic DNS (DDNS) on this Camera (OUT MONITORING SET)
Sets the dynamic DNS information of the obtained account on the camera.
1
Tap “MENU”.
(Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu.
(Operation on this camera)
.
3
Tap “OUT MONITORING SET”.
(Operation on this camera)
.
4
Tap “DDNS SETTING”.
(Operation on this camera)
.
5
Tap “DDNS”, then tap “ON”.
(Operation on this camera)
.
29
CANCELSET
DELETE
USERNAME
REC
≪PLAY
MENU
MENU
Wi-Fi
NETWORK SETTINGS
MAIL SETTING
NETWORK SETTINGS
SENDER'S EMAIL
RECIPIENT'S EMAIL
MAIL SETTING
Using Wi-Fi
6
Enter the DDNS settings (username/password).
(Operation on this camera)
.
0
Tap “USERNAME” or “PASSWORD” to display the respective input
screens.
0
Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0
Tap “DELETE” to delete a character.
0
Tap “CANCEL” to exit.
0
Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0
Tap E or F to move one space to the left or right.
0
After setting, tap “SET”.
Memo :
0
Only the JVC dynamic DNS service can be set on this camera.
Setting the Sender’s E-mail Address
Sets the address to be used for sending e-mails on the camera.
Memo :
0
By using Gmail as the sender’s mail address, some of the settings can be
omitted.
Use of Gmail is recommended for users who have a Gmail account.
1
Tap “MENU”.
(Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu.
(Operation on this camera)
.
3
Tap “NETWORK SETTINGS”.
(Operation on this camera)
.
4
Tap “MAIL SETTING”.
(Operation on this camera)
.
5
Tap “SENDER'S EMAIL”.
(Operation on this camera)
30
.
0
Enter the e-mail address and tap “SET”.
Loading...