JVC GZ-RX625BEU User manual

Basic User Guide

CAMCORDER

GZ-RX625BE GZ-RX621BE

B5A-3007-01

Detailed User Guide

For more details on operating this product, please refer to the “Detailed User Guide” at the following website.

http://manual3.jvckenwood.com/index.html/

Dear Customers

Thank you for purchasing this JVC product. Before use, please read the Safety Precautions and Cautions on p. 2 and p. 15 to ensure safe use of this product.

Mobile User Guide

When you are outside, refer to the “Mobile User Guide”. Mobile User Guide can be viewed with standard browser for Android tablet and iPhone.

http://manual3.jvckenwood.com/mobile/eu/

Safety Precautions

Blue to N (Neutral) or Blac

k Brown to L (Live) or Red

IMPORTANT (for owners in the U.K.) Connection to the mains supply in the United Kingdom.

DO NOT cut off the mains plug from this equipment.

If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.

BE SURE to replace the fuse only with an identical approved type, as originally fitted, and to replace the fuse cover. If nonetheless the mains plug is cut off be sure to remove the fuse and dispose of the plug immediately, to avoid possible shock hazard by inadvertent connection to the mains supply. If this product is not supplied fitted with a mains plug then follow the instructions given below:

DO NOT make any connection to the Larger Terminal coded E or Green. The wires in the mains lead are coloured in accordance with the following code:

If these colours do not correspond with the terminal identifications of your plug, connect as follows: Blue wire to terminal coded N (Neutral) or coloured black. Brown wire to terminal coded L (Live) or coloured Red. If in doubt — consult a competent electrician.

CAUTIONS:

To prevent shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified personnel.

When you are not using the AC adapter for a long period of time, it is recommended that you disconnect the power cord from AC outlet.

CAUTION:

A built-in lithium-ion battery is inside the unit. When discarding the unit, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly.

NOTES:

The rating plate and safety caution are on the bottom and/or the back of the main unit.

The serial number plate is on the bottom and/or the back of the main unit.

The rating information and safety caution of the AC adapter are on its upper and/or lower sides.

WARNING:

The camcorder with battery installed should not be exposed to excessive heat such as direct sunlight, fire or the Iike.

CAUTION:

The mains plug shall remain readily operable.

Remove the mains plug immediately if the camcorder functions abnormally.

CAUTIONS:

Be sure to use the supplied AC adapter.

Do not use the supplied AC adapter with other devices.

CAUTION:

To avoid electric shock or damage to the unit, first firmly insert the small end of the power cord into the AC Adapter until it is no longer wobbly, and then plug the larger end of the power cord into an AC outlet.

Do not point the lens directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock.

CAUTION!

The following notes concern possible physical damage to this unit and to the user.

Carrying or holding this unit by the LCD monitor can result in dropping the unit, or in a malfunction.

Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the unit.

CAUTION!

Connecting cables (Audio/Video, etc.) to this unit and leaving it on top of the TV is not recommended, as tripping on the cables will cause this unit to fall, resulting in damage.

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.

Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts.

Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment.

Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

SOME DO’S AND DON’TS ON THE SAFE USE OF EQUIPMENT

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

DO be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way — switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure that your family knows how to do this. Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of road safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume, as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment.

EN 3

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.

ABOVE ALL

NEVER let anyone especially children push anything into holes, slots or any other opening in the case — this could result in a fatal electrical shock;

NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use.

Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com

Make a backup of important recorded data

JVC will not be responsible for any lost data. It is recommended to copy your important recorded data to a disc or other recording media for storage once every 3 months.

M/D on the unit denotes the month and year of production.

This unit is equipped with Water proof, Dust proof, Drop proof and Freeze proof.

Water proof: Equivalent to IEC

Standard publication 529 IPX8 and IPX6 (30 minutes at depths up to 5 m (16.4 ft))

Dust proof: Equivalent to IEC Standard publication 529 IP5X

Drop proof: This camera clears company testing compliant with "MIL-STD-810F Method; 516.5 Shock: dropping onto plywood 3 cm thick from a height of 1.5 m"

Freeze proof: Allowable operating temperatures: −10 °C to +40 °C Note: Temperatures between

−10 °C and 0 °C temporarily lower battery performance, reducing the time available for recording.

Precautions for waterproof function

Malfunction due to misuse by the customer is not covered by warranty.

Before use in water, be sure to read and understand the “Detailed User Guide”.

Close the terminal cover firmly until it clicks and confirm that the red sign completely goes off.

Make sure that there is no damage to and no foreign material adhered to the packing inside the cover.

Use the camcorder in marine water and fresh water not deeper than 5 m or for not more than 30 minutes.

The waterproof cannot be guaranteed if the camcorder is subject to impact such as dropping.

Do not jump or dive into water holding the camcorder.

Do not use the camcorder in strong water flows such as in rapids or under waterfalls. The strong water pressure may impair the waterproof performance.

Do not soak the camcorder in hot springs or water of 40 °C or higher.

Fogging inside the Lens

Open the terminal cover.

Lens protective glass

Models with waterproof function are airtight. When the temperature rises during recording, condensation can occur inside the lens due to the internal humidity.

During recording

To prevent the temperature of this unit from rising, we recommend that you use the unit in the following ways.

Avoid frequent exposure to direct sunlight.

Record under the shade or use an umbrella. Best if you could keep a wet towel cover the unit.

The use of a tripod is recommended.

Long hours of recording while holding the unit in your hands will cause the temperature of the unit to rise.

It is better to leave the terminal cover open while recording.

However, the waterproof, dust-proof and shockproof features do not function in this condition. Do take note of the environment when using the camera. (Do not use a wet towel.)

Make sure to turn off the power when you are not recording.

The power turns off when the LCD monitor is closed.

During charging

It is recommended to charge the unit in a low humidity environment.

The moist air inside the unit can cause condensation.

We recommend that you charge the unit in a room where humidifier is not in use, and in an air-conditioned room during summer.

When fogging occurs inside the lens

Open the terminal cover to reduce the temperature, close the LCD monitor and leave the camera as it is for a while.

Protecting the Lens

There is a protective glass in front of the lens to protect the lens.

If the protective glass is dirty, wipe clean using a commercially available cleaning cloth.

EN 5

Contents

Safety Precautions ................................. 2

Verifying the Accessories ...................... 6

Names of Parts and Functions ............... 7

Date and Time Setting ........................... 8

Open the terminal cover (SD card cover)

Getting Started

Charging the Battery ............................ 10

Inserting an SD Card ........................... 11

Recording

Video Recording .................................. 12

Video Quality ....................................... 13

...... 9

Playback

Playing Back/Deleting Files on this Unit

Further Information

Troubleshooting/Cautions .................... 15

Recordable Time/Specifications .......... 18

Verifying the Accessories

AC Adapter

UIA312-0520

Power Cord

Adapter Cable QAM1580-001

..... 14

USB Cable

(Type A - Micro Type B)

Core Filter (Large)

(for AV Cable)

Please consult your JVC dealer or the nearest JVC service center when purchasing a new AV cable.

Attach the lens cap when carrying the camera around and when the camera is not in use.

AV Cable

E3A-0085-00

Core Filter (small)

(for AC Adapter)

Lens Cap

Basic User Guide

(this manual)

6 EN

Names of Parts and Functions

Wind twice (for AC Adapter cable)

Release the stopper.

3 cm

To be connected to this unit

Wind once (for AV Cable)

Lens Protective Glass If the protective glass is dirty, wipe

using a commercially available cloth.

Light(GZ-RX625)

Stereo Microphone

LCD Monitor

CHARGE (Charging) Lamp (p. 10)

POWER/ACCESS (Power/Access) Lamp

Zoom/Volume Lever (p. 12, 14)

Attaching the Core Filter

Attach the core filter to the AV Cable and the AC Adapter cable as shown in the illustration. The core filter reduces interference when this unit is connected to other devices.

Use the small core filter for the AC Adapter cable and the big core filter for the AV Cable.

Do not attach the core filter to the supplied Adapter Cable.

START/STOP (Video Recording) Button (p. 12)

Terminal Cover (SD Card Cover)

SD Card Slot (p. 11)

Reset Button

HDMI Mini Connector

AV Connector

USB Connector

Date and Time Setting

SET DATE/TIME!

201912 10 00

TIME

DATE

SAVE

DATE & TIME

GMT

SAVE

DATE & TIME/AREA

Open the LCD monitor.

The unit turns on. When the LCD monitor is closed, the unit turns off.

Tap [OK] when [SET DATE/

TIME!] is displayed.

Set the date and time.

When the day, month, year, hour, or minute item is tapped, 3 and 2 will be displayed. Tap 3 or 2 to adjust the value.

Repeat this step to input the day, month, year, hour, and minute.

After setting the date and

time, tap [SAVE].

Select the region where you

live and tap [SAVE].

Time difference between the selected city and the GMT (Greenwich Mean Time) is displayed.

Tap 0 or 1 to select the city name.

8 EN

Open the terminal cover (SD card cover)

Not properly closed if the red mark is visible!

(Rear)

Open the LCD monitor.

Slide down the terminal cover lock and slide the cover aside

Lift the cover slowly.

To close

Leave the LCD monitor open first.

(The cover is not properly closed if the red mark at the terminal cover lock is visible.)

Flip down the cover slowly while making sure the gray waterproof seal fits into the opening at the terminals.

Press the entire cover against the camcorder with equal force and firmly attach the cover completely.

Slide the cover until it clicks into place.

CAUTION

Do not apply excessive force when opening or closing the terminal cover.

Do not open or close the terminal cover with wet or dirt/sand-covered hands.

Do not allow any dirt, lint, hair, sand, and other foreign substances to accumulate between the waterproof seal and the case.

Never damage or scratch the waterproof seal and terminal cover. Doing so can result in leaks. If the seal is damaged, contact your nearest JVC Service Center for a replacement. (Charges apply.)

Read the “Detailed User Guide” carefully before using the camcorder under water or in places exposed to water droplet.

EN 9

Charging the Battery

AC Adapter (Provided)

Adapter Cable (Provided)

Charging Lamp

To AC Outlet (100 V to 240 V)

A battery is built into the camcorder.

Open the terminal cover (p. 9)

Connect adapter cable to AC adapter.

Plug in the AC adapter to AC outlet (100 V to 240 V).

Connect the other side to USB socket on the unit.

CAUTION

At the time of purchase or in case of the battery is not used for a long period of time, the charging time will be longer than usual. The camera does not turn on if the remaining battery power is low. In this case, charge the battery for more than 40 minutes before turning on the power.

Charging time: Approx. 6 h 10 m (when charging at 25°C)

The battery cannot be charged outside the room temperature range of 10°C to 35°C. The CHARGE lamp does not light up when the battery is not being charged. If the temperature increases or decreases during charging, the CHARGE lamp will blink slowly and charging will stop. In this case, remove the AC adapter, press the Reset button and wait until the room temperature is within the above stated range before charging again.

You can record or play back videos during charging. (However, the charging time will be longer than usual. In addition, the remaining battery power may decrease according to conditions.) If the internal temperature rises when using the unit, stop the charging temporarily. (The CHARGE lamp goes off.)

If malfunctions (such as overvoltage) occur, charging will stop. In this case, the CHARGE lamp blinks quickly as a notification.

When the recording time becomes extremely short even when the battery is fully charged, the battery needs to be replaced. For details on replacing the built-in battery (subject to a fee), consult the nearest JVC service center.

For details on other charging methods, please refer to the “Detailed User Guide”.

10 EN

Inserting an SD Card

Insert an SD card.

Before inserting the SD card, close the LCD monitor to turn off this unit.

(Rear)

Label

Open the terminal cover.

The videos and the still images are recorded to the built-in memory at the initial settings. Insert a commercially available SD card if you want to record to the SD card. For details on switching the media, please refer to the “Detailed User Guide”.

To remove the SD card

Push the SD card inward once, then pull it out straight.

NOTE

Operations are confirmed on the following SD cards.

Manufacturer Panasonic, TOSHIBA, SanDisk Video A

Still Image B SD card (256 MB to 2 GB) / SDHC card (4 GB to 32 GB) /

Using SD cards (including SDHC/SDXC cards) other than those specified above may result in recording failure or data loss.

This unit is not guaranteed to operate with all SD cards, even when using the ones specified above. Some SD cards may not work due to specification changes, etc.

To protect the data, do not touch the terminals of the SD card.

When using an SDXC card, check its compatibility with the OS of your computer by referring to the Detailed User Guide.

Do not use a miniSD card or microSD card (even if the card is inserted in an adapter). It may cause malfunction to the camcorder.

Class 4 (

Class 4 ( Class 4 (

When recording with video quality [UXP], Class 6 ( or higher is recommended.

When recording in progressive format (50p), Class 6 (

) or higher compatible SD card (2 GB)/

) or higher compatible SDHC card (4 GB to 32 GB)/

) or higher compatible SDXC card (64 GB to 128 GB)

) or higher is required.

SDXC card (64 GB to 128 GB)

)

EN 11

Video Recording

Check if the recording mode is A video.

If the mode is B still image, tap B on the touch screen, then tap A to switch.

Start recording.

Press again to stop.

Zooming

(Wide angle)

(Telephoto)

Zoom Lever

If the mode is H Manual, tap H on the touch screen, then tap P to switch.

Check if the recording mode is P.

≪PLAY

0:00:00 [0:54]

REC

Recording in Progress Recording-Standby

Battery Indicator

Recording Media

Image Stabilizer

Video Quality

Remaining Recording Time

Scene Counter

Still Image

Recording Button

You can record without worrying about the setting details by using the P (Intelligent Auto) mode. Settings such as exposure and focus will be adjusted automatically to suit the shooting conditions.

Before recording an important scene, it is recommended to conduct a trial recording.

You can also tap 6 on the touch screen to record. To stop recording, tap

. In addition, you can also tap D to zoom.

Indications during video recording

NOTE

The estimated recording time of the supplied battery is approximately 2 hour 40 minutes of actual recording and up to 4 hours 50 minutes of continuous recording.

Do not remove SD card when the POWER/ACCESS lamp is lighted. The recorded data may become unreadable.

With [AUTO POWER OFF] operation, the camera automatically turns off if no operation is performed for 5 minutes, in order to conserve power. (The unit enters into standby mode when the AC adapter is used.)

The angle of view may change when the image stabilizer is turned on or off.

When recording underwater, the internal mechanical noise (such as zooming sound) may be easily picked up and recorded. This is not a malfunction.

Videos recorded in 50p mode (select [50p] in [SYSTEM SELECT]) can be played back only by the AVCHD Progressive compatible devices.

Video Quality

This unit can perform recording in high definition (1920x1080). Default setting of [VIDEO QUALITY] is XP.

To change the setting

Tap [MENU].

Tap [RECORD SETTING].

Tap [VIDEO QUALITY].

Tap the desired video quality.

AVCHD (1920x1080)

For the approximate video recording time, refer to p. 18.

Please refer to the “Detailed User Guide” when recording in progressive format (50p).

UXP Higher video quality

(Default)

More recording time

Playing Back/Deleting Files on this Unit

VOL.

＋

PLAY

Tap on the files to delete.

Ta p R.

To delete unwanted files

Turn up the volume

Turn down

the volume

Volume adjustment during playback

Ta p u to return to the video index screen.

Tap on the file to play back.

Tap "SET".

Ta p E to return to the recording mode.

Ta p F on the touch screen to select the playback mode.

Ta p e to pause playback.

Tap "OK".

Tap "EXECUTE" when the confirmation message appears.

Ta p A or B to select the video or still image mode.

A I mark appears on the selected file. To remove the I mark, tap again.

DELETE

SEL ALL REL ALL SET

QUIT

Ta p I/J to select the media for playback.

Select and play back the recorded videos or still images from an index screen (thumbnail display).

When playing back videos recorded in 50p mode (select [50p] in [SYSTEM SELECT]), please refer to the “Detailed User Guide”.

To capture a still image during playback

Pause the playback with e.

Press the START/STOP button or tap the A on the LCD.

NOTE

While this unit may be used with the LCD monitor reversed and closed, the temperature rises more easily. Leave the LCD monitor open when using this unit.

The power may turn off to protect the circuit if the temperature of this unit rises too much.

14 EN

Troubleshooting/Cautions

Troubleshooting

If you encounter problems with this unit, check the following before requesting service.

Refer to the “Troubleshooting” section in the “Detailed User Guide”.

If you have difficulties operating the unit, refer to the detailed descriptions in the “Detailed User Guide”.

http://manual3.jvckenwood.com/ index.html/

This unit is a microcomputercontrolled device. Electrostatic discharge, external noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly.

In such a case, reset the unit.

Remove all the cables from this unit.

Press the "Reset button" located inside of the terminal cover. (Before pressing the reset button, close the LCD monitor to turn off this unit.)

Reattach the AC adapter, open the LCD monitor and this unit powers on automatically.

If the above do not solve the problem, consult your nearest JVC dealer or JVC service center.

Built-in Battery

This unit is equipped with a built-in lithiumion battery. Before using this Unit, be sure to read the following cautions:

To avoid hazards

…

do not burn.

…

do not modify or disassemble.

…

do not expose this Unit to temperatures exceeding 60 °C, as this may cause the built-in battery to overheat, explode or catch fire.

To prevent damage and prolong service life

…

do not subject to unnecessary shock.

…

charge within the temperature range of 10°C to 35°C. Cooler temperatures require longer charging time, or in some cases stop charging at all.

Warmer temperatures prevent complete charging, or in some cases stop charging at all.

…

store in a cool, dry place. Extended exposure to high temperatures will increase natural discharge and shorten service life.

…

keep a 30% battery level (i) if the battery is not to be used for a long period of time. In addition, fully charge and then fully discharge the battery every 6 months, then continue to store it at a 30% battery level (i).

…

remove the AC adapter from the unit when not in use, as some machines use current even when switched off.

…

do not drop intentionally or subject to strong impact.

Recording Medium

Be sure to follow the guidelines below to prevent corruption or damage to your recorded data.

Do not bend or drop the recording medium, or subject it to strong pressure, jolts or vibrations.

Do not splash the recording medium with water.

Do not use, replace, or store the recording medium in locations that are exposed to strong static electricity or electrical noise.

Do not turn off the camcorder power during shooting, playback, or when otherwise accessing the recording medium.

Do not bring the recording medium near objects that have a strong

magnetic field or that emit strong electromagnetic waves.

Do not store the recording medium in locations with high temperature or high humidity.

Do not touch the metal parts.

When erasing data using the camcorder, the data won’t be erased completely. When handing over your camcorder and/or SD card, you are recommended to erase all of the data by either performing “FORMAT” or “FACTORY PRESET” operation on this unit, using commercially available software, or by physically destroying the camcorder.

LCD Monitor

To prevent damage to the LCD monitor, DO NOT

…

push it strongly or apply any shocks.

…

place the camcorder with LCD monitor on the bottom.

To prolong service life

…

avoid rubbing it with coarse cloth.

While the LCD monitor screen has more than 99.99% effective pixels, 0.01% of the pixels may be bright spots (red, blue, green) or dark spots. This is not a malfunction. The spots will not be recorded.

Main Unit

For safety, DO NOT

…

open the camcorder’s chassis.

…

disassemble or modify the unit.

…

allow inflammables, water or metallic objects to enter the unit.

…

disconnect the power supply while the power is on.

…

place naked flame sources, such as lighted candles, on the apparatus.

…

leave dust or metal objects adhered to the power plug or an AC wall outlet.

…

insert any objects in the camcorder.

Avoid using the unit

…

in places subject to soot or steam such as near a cooking stove.

…

in places subject to excessive shock or vibration.

…

near a television set.

…

near appliances generating strong magnetic or electric fields (speakers, broadcasting antennas, etc.).

…

in places subject to extremely high (over 40 °C) or extremely low (under -10 °C) temperatures.

DO NOT leave the unit

…

in places of over 50°C

…

in places where humidity is extremely low (below 35 %) or extremely high (above 80 %) with the terminal cover open.

…

in direct sunlight.

…

in a closed car in summer.

…

near a heater.

…

in high places such as on a TV. Leaving the unit in high places while a cable is connected may result in a malfunction if the cable is caught and the unit falls onto the floor.

To protect the unit, DO NOT

…

drop the unit or strike it against hard objects.

…

subject it to shock or excessive vibration during transportation.

…

keep the lens directed at extremely bright objects for long periods.

…

expose the lens to direct sunlight.

…

swing it excessively when using the hand strap.

…

swing the soft camcorder case excessively when the camcorder is inside it.

…

cover camcorder with a towel, cloth and so on.

To prevent the unit from dropping

Fasten the grip belt securely.

When using the camcorder with a tripod, attach the camcorder to the tripod securely.

If the camcorder drops, you may be injured and the camcorder may be damaged.

When a child uses the unit, there must be parental guidance.

Dear Customer, [European Union] This apparatus is in conformance with

the valid European directives and standards regarding Radio and RoHS.

European representative of JVC KENWOOD Corporation is: JVCKENWOOD Deutschland GmbH Konrad-Adenauer-Allee 1-11 61118 Bad Vilbel GERMANY

A copy of the Declaration of Conformity with regard to the RE Directive 2014/53/ EU can be downloaded from the following Web sites.

http://www3.jvckenwood.com/ecdoc/

Hereby, JVC declares that this system [GZ-RX625BE, GZ-RX621BE] is in compliance with the essential requirements and other relevant provision of Directive 2014/53/EU.

Wireless LAN

This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies.

In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services.

This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 - 2483.5 MHz For detailed information the end-user should contact the national spectrum authority in France.

Remember that this unit is intended for private consumer use only.

Any commercial use without proper permission is prohibited. (Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand.)

Trademarks

AVCHD Progressive and AVCHD Progressive logo are trademarks of Panasonic Corporation and Sony Corporation.

HDMI (High-Definition Multimedia Interface) and HDMI logo are either registered trademarks or trademarks of HDMI Licensing, LLC in the United States and/or other countries.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. SDXC logo is a trademark of SD-3C LLC. Windows® and Windows Vista® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Apple, Mac, Mac OS, OS X, iMovie, iPhoto, iPhone and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Google™, Android™, YouTube™, YouTube logo and Chrome™ are trademarks and/or registered trademarks of Google Inc. Wi-Fi, Wi-Fi logo, Wi-Fi CERTIFIED, Wi-Fi CERTIFIED logo, Wi-Fi Protected Setup, Wi-Fi Protected Setup logo, WPA, and WPA2 are trademarks or registered trademarks of Wi-Fi Alliance. QR Code is a registered trademark of Denso Wave Incorporated. Other product and company names included in this instruction manual are trademarks and/or registered trademarks of their respective holders. Marks such as ™ and ® have been omitted in this manual.

Recordable Time/Specifications

JVC KENWOOD Corporation

3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Approximate Video Recording Time

Built-in

Quality

UXP 35 m 20 m 40 m 1 h 20 m 2 h 40 m 5 h 40 m 11 h 30 m

XP 50 m 30 m 1 h 1 h 50 m 3 h 50 m 8 h 10 m 16 h 20 m EP 3 h 1 h 40 m 3 h 30 m 7 h 14 h 28 h 50 m 57 h 50 m

50P 30 m 15 m 35 m 1 h 10 m 2 h 30 m 5 h 10 h 10 m

The recordable time is only a guide. The actual recording time may be longer or shorter than the time indicated above.

memory

8 GB 4 GB 8 GB 16 GB 32 GB 64 GB 128 GB

Camera

Power supply Using AC adapter: DC 5 V Power

consumption

Dimensions 60 mm x 59.5 mm x 127 mm

Weight Approx. 295 g

2.3 W (when [LIGHT] is set to [OFF] (GZ-RX625) and [MONITOR BRIGHTNESS] is set to [3] (standard) and [SYSTEM SELECT] is set to [50i])

Rated Current Consumption: 2A

(W x H x D: excluding grip belt)

Wireless LAN

Frequency Range 1 - 13 ch ：2412 - 2472 MHz Output Power 11 b/g/n：12.21 dBm (max)

The specifications and appearance of this product are subject to changes for further improvement without prior notice.

For more information, please refer to the Detailed User Guide.

http://manual3.jvckenwood.com/index.html/

SDHC/SDXC Card

18 EN

0119TOH-SW-MT

B5A-3007-01

Grundlæggende brugervejledning

VIDEOKAMERA

GZ-RX625BE GZ-RX621BE

Detaljeret brugervejledning

For yderligere oplysninger om betjening af dette produkt, bedes du henvise til „Detaljeret brugervejledning“ på den følgende website.

http://manual3.jvckenwood.com/index.html/

Kære kunder

Vi takker dig for at købe dette JVC produkt. Inden du tager produktet i brug, bedes du læse Sikkerhedsforskrifterne og Forholdsreglerne på side. 2 og side. 15 for at sørge for sikker anvendelse af produktet.

Mobile Brugervejledning

Når du er udenfor, se „Mobile Brugervejledning“. Mobile Brugervejledning kan ses med en standardbrowser for Android tablet og iPhone.

http://manual3.jvckenwood.com/mobile/eu/

Sikkerhedsforskrifter

BEMÆRKNINGER:

Typebetegnelse og forsigtighedsregler er anbragt på undersiden og/eller bagsiden af hovedenheden.

Serienummerpladen er placeret på batteripakningens monteringsdel.

Information om mærkekapacitet og sikkerhedsforskrifter for lysnetadapteren sidder på over- og/eller undersiden.

FORSIGTIGHEDSREGLER:

Forsøg aldrig at lukke kabinettet op. Der er risiko for at få elektrisk stød. Der findes ingen dele i kameraet, som brugeren selv kan reparere. Reparationer og service skal udføres af fagfolk.

Hvis De ikke anvender lysnetadapter i længere tid, anbefales det, at De tager netledningen ud af stikkontakten i væggen.

FORSIGTIG:

For at undgå elektrisk stød eller beskadigelse af apparatet, skal den lille ende af netledningen trykkes godt ind i lysnetadapteren, indtil den ikke kan rokkes, hvorefter den store ende af netledningen sættes i et vekselstrømsudtag.

FORSIGTIG:

Der er et indbygget litium-ion-batteri inde i enheden. Når du kasserer enheden, bør du tage miljøproblemer i betragtning og overholde de lokale regler og love, der vedrører afhændelsen af disse batterier, til punkt og prikke.

ADVARSEL:

Videokameraet med installeret batteri må ikke udsættes for stærk varme som f.eks. direkte sollys, ild eller lignende.

FORSIGTIG:

Netstikket skal være umiddelbart tilgængeligt.

Fjern netstikket omgående, hvis denne enhed fungerer unormalt.

FORSIGTIGHEDSREGLER:

Sørg for at bruge den medfølgende lysnetadapter.

Den medfølgende lysnetadapter må ikke bruges med andre anordninger.

2 DA

Ret ikke objektivet direkte mod solen. Dette kan føre til øjenskader og bevirke, at det interne kredsløb ikke fungerer, som det skal. Desuden vil der være fare for brand og/eller elektrisk stød.

FORSIGTIG!

De følgende bemærkninger vedrører eventuel fysisk beskadigelse af kameraet og personskade.

Hvis De bærer eller holder kameraet i LCD-monitoren, risikerer De at tabe eller beskadige den.

Brug ikke et trebenet stativ, hvis underlaget er ustabilt eller ujævnt. Stativet kan vælte, hvorved kameraet kan lide skade.

FORSIGTIG!

Tilslutning af kabler (lyd/video, osv.) til kameraet og anbringelse af det ovenpå et fjernsyn frarådes, da der i så fald vil være fare for at snuble over kablerne med nedfald af kameraet og materiel skade og personskade til følge.

Dette produkt er godkendt ifølge AVC Patent Portfolio License for personlig brug af en forbruger eller andre brugere, som ikke modtager betaling for at (i) kode en video i overenstemmelse med AVCstandarden („AVC Video“) og/eller (ii) kode AVC video der er blevet kodet af en forbruger, som er engageret i en personlig aktivitet, og/eller er blevet indhentet fra en videoleverandør der har licens til at levere en AVC Video. Der er ikke bevilliget noget licens, eller det skal antyde nogen anden anvendelse.

Yderligere oplysninger kan fås fra MPEG LA, L.L.C. Se http://www.mpegla.com

Oplysninger om bortskafning af gammelt elektrisk udstyr og batterier (gælder for lande som har indført separate systemer for indhentning af affald)

Produkter og batterier med symbolet (vogn med kryds) må ikke kasseres som husholdningsaffald.

Gammelt elektrisk og elektronisk udstyr og batterier skal recirkuleres på et anlæg, der er i stand til at håndtere disse elementer og deres affaldsprodukter.

Kontakt de lokale myndigheder for oplysninger om et genbrugssted i nærheden af dig. Korrekt recirkulering og bortskaffelse af affald hjælper til med at bevare ressourcer mens det forebygger skadelige virkning af vores helbred og miljøet.

Bemærk: Tegnet „Pb“ under symbolet for batterier giver udtryk for at dette batteri indeholder bly.

Lav en sikkerhedskopi af vigtige optagede data

JVC er ikke ansvarlig for tab af data. Det anbefales, at du kopierer vigtige, optagede data til en disk eller et andet optagemedie til lagring en gang hver tredje måned.

M/D på enheden angiver måned og produktionsår.

DA 3

Husk på, at dette kamera udelukkende er beregnet til private indspilninger.

Enhver kommerciel anvendelse uden forudgående tilladelse er forbudt. (Selv i tilfælde hvor du indspiller en begivenhed såsom et show, en forestilling eller en udstilling til personlig brug, anbefales det stærkt, at du på forhånd indhenter tilladelse.)

Varemærker

AVCHD Progressive og AVCHD Progressive-logoet er varemærker, der tilhører Panasonic Corporation og Sony Corporation.

HDMI (High-Definition Multimedia Interface) og HDMI-logoet er enten registrerede varemærker eller varemærker der tilhører HDMI Licensing, LLC i USA og/eller andre lande.

Fremstillet under licens fra Dolby Laboratories. Dolby og dobbelt-D symbolet er varemærker, tilhørende Dolby Laboratories.

SDXC-logoet er et varemærke der tilhører SD-3C LLC.

Windows® er enten et registreret varemærke eller et varemærke tilhørende Microsoft Corporation i USA og/eller andre lande.

Apple, Mac, Mac OS, OS X, iMovie, iPhoto, iPhone og Safari er varemærker, der tilhører Apple Inc., registreret i USA og andre lande.

Intel og Intel Core er varemærker eller registrerede varemærker, der tilhører Intel Corporation eller deres datterselskaber i USA og andre lande.

Google™, Android™, YouTube™, YouTubelogoet og Chrome™ er varemærker og/eller registrerede varemærker, der tilhører Google Inc.

Wi-Fi, Wi-Fi logoet, Wi-Fi CERTIFIED, Wi-Fi CERTIFIED-logoet, Wi-Fi Protected Setup, Wi-Fi Protected Setup logo, WPA og WPA2 er varemærker eller registrerede varemærker, der tilhører Wi-Fi Alliance.

QR Code er et registreret varemærke tilhørende Denso Wave Incorporated.

Andre produkt- og firmanavne, der er omfattet i denne brugervejledning er varemærker og/eller registrerede varemærker der tilhører deres respektive ejere.

Mæker som for eksempel ™ og ® er blevet udeladt i denne manual.

Denne enhed er udstyret med Vandtæt, Støvtæt, Faldsikkert og Frostsikkert.

Vandtæt: Svarende til IEC

Standardpublikation 529 IPX8 og IPX6 (30 minutter ved dybder på op til 5 m)

Støvtæt: Svarende til IEC Standardpublikation 529 IP5X

Faldsikkert: Dette kamera overholder selskabets testning i overensstemmelse med „MILSTD-810F Method; 516.5 Shock: Falde ned på 3 cm tyk krydsfinér fra en højde på 1,5 m“

Frostsikker: Tilladt driftstemperatur: -10 °C til +40 °C Bemærk: Temperaturer mellem

-10 °C og 0 °C sænker midlertidig batteriets ydeevne og reducerer tiden tilgængelig til optagelse.

Forholdsregler for vandtæt funktion

Funktionsfejl på grund af forkert brug af kunden dækkes ikke af garantien.

Før anvendelse i vand skal du læse og forstå „Detaljeret brugervejledning“.

Luk terminaldækslet godt, indtil det klikker, og bekræft at det røde lys slukkes helt.

Sørg for, at der ingen skade er, og at ingen fremmedlegemer sidder fast på pakningen inden i dækslet.

Brug videokameraet i havvand og ferskvand, der ikke er dybere end 5 m, og ikke i mere end 30 min.

Vandtætheden kan ikke garanteres, hvis videokameraet udsættes for stød, som f.eks. ved tab.

Hop ikke i og dyk ikke ned i vand, mens du holder videokameraet.

Anvend ikke videokameraet i stærke vandstrømme ved eksempelvis rafting eller under vandfald. Det stærke vandtryk kan forringe vandtætheden.

Gennemvæd ikke videokameraet i varme kilder eller vand over 40 °C.

Tildugning indvendigt i objektivet

Åbn terminaldækslet.

Objektivets beskyttelsesglas

Modeller med vandtæt funktion er lufttætte. Når temperaturen stiger under optagelse, kan der opstå kondensering i objektivet som følge af fugtighed indvendigt.

Under optagelse

For at undgå temperaturstigning i denne enhed anbefaler vi dig, at du anvender enheden på følgende måder.

Undgå hyppig udsættelse for direkte sollys.

Optag i skygge, eller benyt en paraply. Mest optimalt vil det være at lade et vådt håndklæde dække enheden.

Det anbefales at anvende stativ.

Længere tids optagelse, mens du holder enheden i hænderne, medfører temperaturstigning i enheden.

Det er bedre at lade terminaldækslet stå åbent under optagelse.

Funktionerne for vandtæt, støvtæt og stødsikker virker dog ikke i denne tilstand. Vær opmærksom på omgivelserne ved anvendelse af kameraet. (Anvend ikke et vådt håndklæde).

Sørg for, at der er slukket for strømmen, når du ikke optager.

Strømmen slukker, når LCD-skærmen lukkes.

Under opladning

Det anbefales at oplade enheden i et område med lav luftfugtighed.

Fugtig luft inde i enheden kan medføre kondensering.

Vi anbefaler, at du oplader enheden i et rum, hvor der ikke benyttes luftfugter, og om sommeren i et rum med aircondition.

Når der opstår tildugning indvendigt i objektivet

Åbn terminaldækslet for at sænke temperaturen, luk LCD-skærmen, og lad kameraet være i et stykke tid.

Beskyttelse af objektivet

Der er beskyttelsesglas foran på objektivet for at beskytte det.

Hvis beskyttelsesglasset er snavset, skal du tørre det af med en renseklud, der fås i handelen.

DA 5

Indhold

Sikkerhedsforskrifter .............................. 2

Kontrol af medfølgende tilbehør ............. 6

Delenes navne og deres funktioner ....... 7

Indstilling af dato og tid .......................... 8

Åbn terminaldækslet (SD-kortets låg) .... 9

Kom godt i gang

Opladning af batteriet .......................... 10

Indsættelse af SD-kort ......................... 11

Optagelse

Videooptagelse .................................... 12

Videokvalitet ........................................ 13

Afspilning

Afspilning/sletning af filer på denne enhed

Yderligere oplysninger

Fejlfinding/Forholdsregler .................... 15

Optagelsestid/specifikationer .............. 18

Kontrol af medfølgende tilbehør

Lysnetadapter

UIA312-0520

Strømledning

Adapterkabel

QAM1580-001

........ 14

USB-kabel

(type A - Mikro type B)

Kernefilter (Stort)

(for AV-kabel)

Når du køber et nyt AV.-kabel bedes du kontakte din JVC-forhandler eller det nærmeste JVC servicecenter for yderligere oplysninger.

Montér linselåget, når du bærer kameraet rundt, og når kameraet ikke er i brug.

AV-kabel

E3A-0085-00

Kernefilter (lille)

(for lysnetadapter)

Linselåg

Grundlæggende brugervejledning

(denne håndbog)

6 DA

Delenes navne og deres funktioner

Sno to gange (for kabel til lysnetadapter)

Udløs stopperen.

3 cm

Den skal kobles til apparatet

Sno en gang (for AV-kabel)

Objektivets beskyttelsesglas Hvis beskyttelsesglasset er snavset,

skal du tørre det af med en klud, der fås i handelen.

Lys (GZ-RX625)

Stereomikrofon

LCD-skærm

CHARGE Lampen (opladning) (side. 10)

POWER/ACCESS Lampen (Strøm/ adgang)

Zoom/lydstyrke-reguleringsarm (side. 12, 14)

Fastgøring af kernefiltret

Fastgør kernefilteret på AV-kablet og kablet til lysnetadapter som vist i illustrationen. Kernefiltret reducerer interferensen, når dette apparat er koblet til andre enheder.

Anvend det lille kernefilter til kablet til lysnetadapteren og det store kernefilter til AV-kablet.

Fastgør ikke kernefilteret til det medfølgende Adapterkabel.

START/STOP (Video-optagelse)-knap (side. 12)

Terminaldæksel (SD-kortdæksel)

Port til SD-kort (side. 11)

Nulstillingsknap

HDMI mini-stikket

AV-stik

USB-stik

Indstilling af dato og tid

SET DATE/TIME!

201912 10 00

TIME

DATE

SAVE

DATE & TIME

GMT

SAVE

DATE & TIME/AREA

Åbn LCD-skærmen.

Enheden tænder. Enheden slukker, når LCD-skærmen er lukket.

Tryk [OK] når [SET DATE/

TIME!] bliver vist.

Angiv dato og klokkeslæt.

Når der trykkes på dag, måned, år, time eller minut, bliver 3 og 2 vist. Tryk på 3 eller 2 for at justere værdien.

Gentag dette trin til at indstille dag, måned, år, time og minut.

Efter indstilling af dato og

tid, tryk [SAVE].

Vælg din region og tryk på

[SAVE].

Tidsforskellen mellem den valgte by og GMT (Greenwich Mean Time) bliver vist.

Tryk på 0 eller 1 for at vælge byens navn.

8 DA

Åbn terminaldækslet (SD-kortets låg)

Ikke lukket ordentligt, hvis det røde mærke er synligt!

(Bagside)

Åbn LCD-skærmen.

Skub terminaldækslets lås ned, og skub dækslet til side

Løft dækslet langsomt.

For at lukke

Lad først LCD-skærmen være åben.

(Dækslet er ikke lukket ordentligt, hvis det røde mærke på terminaldækslets lås er synligt).

Klap dækslet langsomt ned, mens du sørger for, at den grå, vandtætte forsegling passer ind i åbningen ved terminalerne.

Tryk hele dækslet ned mod videokameraet med jævn kraft, og montér omhyggeligt dækslet helt.

Skub dækslet godt på plads, indtil den giver et klik.

FORSIGTIG

Du må ikke være for voldsom, når du åbner eller lukker terminaldækslet.

Åbn eller luk ikke terminaldækslet, hvis dine hænder er våde eller fyldt snavs/ sand.

Sørg for, at der ikke samler sig snavs, støv, hår, sand og andre fremmedlegemer mellem den vandtætte forsegling og kamerahuset.

Du må aldrig beskadige eller ridse den vandtætte forsegling og terminaldækslet. Gør du det, kan det medføre lækager. Hvis forseglingen er beskadiget, bedes du kontakte dit nærmeste JVC-servicecenter for udskiftning. (Udskiftningen er ikke gratis).

Læs „Detaljeret brugervejledning“ omhyggeligt, før du anvender videokameraet under vand eller på steder, der udsættes for vanddråber.

DA 9

Opladning af batteriet

Lysnetadapter (medfølger)

Adapterkabel (medfølger)

Ladelampe

Til stikkontakten (100 V til 240 V)

Et batteri er bygget ind i videokameraet.

Åbn terminaldækslet (side. 9)

Tilslut Adapterkablet til AC-adapteren.

Tilslut AC-adapteren til stikkontakten (100 V til 240 V).

Forbind den anden side til USB-stikket på Enheden.

FORSIGTIG

På købstidspunktet, eller hvis batteriet ikke anvendes i længere tid, er opladningstiden længere end normalt. Kameraet tændes ikke, hvis den resterende batterikapacitet er lav. Hvis dette er tilfældet, skal du oplade batteriet i mere end 40 minutter, før du tænder for strømmen.

Opladningstid: Ca. 6 t og 10 min (når der oplades ved 25°C)

Batteriet kan ikke oplades uden for en stuetemperatur på mellem 10 °C og 35 °C. Lampen CHARGE begynder ikke at lyse, når batteriet ikke lades op. Hvis temperaturen stiger eller falder under opladning, blinker lampen CHARGE langsomt, og opladningen stopper. I så fald skal du fjerne lysnetadapteren, trykke på knappen Nulstil og vente, til stuetemperaturen ligger inden for det ovennævnte interval, før du oplader igen.

Du kan optage eller afspille videoer under opladning. (Opladningstiden er dog længer end normalt. Derudover reduceres den tilbageværende batterikapacitet muligvis i henhold til forholdene). Hvis den indvendige temperatur stiger ved anvendelse af enheden, skal du midlertidigt indstille opladningen. (Lampen CHARGE slukker).

Hvis der opstår funktionsfejl (såsom overspænding), stopper opladningen. I så fald blinker lampen CHARGE hurtigt som underrettelse.

Når optagetiden bliver meget kort, selvom batteriet er fuldt opladet, skal du skifte batteriet ud. For detaljer om udskiftning af det indbyggede batteri (mod betaling), kontakt det nærmeste JVC-servicecenter.

For detaljer om andre opladningsmetoder, se „Detaljeret brugervejledning“.

10 DA

+ 64 hidden pages