JVC GZ-HM690, GZ-HM650, GZ-HM670, GZ-HM440, GZ-HM450 User Guide

CAMCORDER

Detailed User Guide

GZ-HM690/GZ-HM670/
GZ-HM650/GZ-HM450/
GZ-HM440

LYT2268-002A

Table of Contents

Beginner's Guide ............................................................ 4

Charging .................................................................................. 4

Recording ................................................................................ 4

Playback .................................................................................. 4

Shooting Tips ........................................................................... 4

Holiday Season/Christmas ...................................................... 5

Wedding .................................................................................. 6

Travel ....................................................................................... 7

Amusement Park ..................................................................... 9

Playback

Playing Back Videos .............................................................. 50

Playing a Video with Defective Management Information

........................................................................................ 52

Playing Back Still Images ....................................................... 52

Slideshow Playback ........................................................... 53

Searching for a Specific Video/Still Image ............................. 54

Date Search ....................................................................... 54

Connecting to and Viewing on TV .......................................... 54

Connecting via the HDMI Mini Connector .......................... 55

Connecting via the Component Connector ........................ 56

Connecting via the AV Connector ...................................... 56

Getting Started

Key Features ......................................................................... 10

Model Differences ................................................................. 11

Verifying the Accessories ...................................................... 12

Charging the Battery Pack ..................................................... 13

Charging with USB Cable .................................................. 13

Grip Adjustment ..................................................................... 14

Using as a Hand Strap ....................................................... 14

Inserting an SD Card (GZ-HM450/GZ-HM650/GZ-HM670/GZ-

HM690) .............................................................................. 15

Types of Usable SD Card ................................................... 15

Using an Eye-Fi Card ......................................................... 16

Inserting an SD Card (GZ-HM440) ........................................ 17

Types of Usable SD Card ................................................... 17

Using an Eye-Fi Card ......................................................... 18

Using the Touch Screen ........................................................ 19

Names of Buttons and Functions on the LCD Monitor ....... 19

Clock Setting ......................................................................... 20

Resetting the Clock ............................................................ 21

Changing the Display Language ............................................ 22

Holding this Unit .................................................................... 22

Tripod Mounting .................................................................... 22

Using this Unit Overseas ....................................................... 23

Charging the Battery Pack Overseas ................................. 23

Setting the Clock to Local Time when Traveling ................. 23

Setting Daylight Saving Time ............................................. 24

Optional Accessories ............................................................. 25

Recording

Taking Videos in Intelligent Auto Mode .................................. 26

Zooming ............................................................................. 28

Capturing Still Images During Video Recording ................. 28

Taking Still Images in Intelligent Auto Mode .......................... 28

Zooming ............................................................................. 30

Manual Recording ................................................................. 30

Scene Selection ................................................................. 31

Adjusting Focus Manually .................................................. 32

Adjusting Brightness .......................................................... 33

Setting White Balance ........................................................ 33

Setting Backlight Compensation ........................................ 34

Taking Close-up Shots ....................................................... 34

Creating Animation Effects (ANIMATION EFFECT) .............. 35

Registering Human Face Personal Authentication Information

............................................................................................ 36

Setting SMILE%/NAME DISPLAY ...................................... 37

Editing the Registered Face Information ............................ 38

Capturing Subjects Clearly (TOUCH PRIORITY AE/AF) ....... 40

Capturing Smiles Automatically (SMILE SHOT) .................... 41

Recording while Displaying a Magnified View of a Selected Face

(FACE SUB-WINDOW) ...................................................... 42

Reducing Camera Shake ....................................................... 43

Recording at Intervals (TIME-LAPSE RECORDING) ............. 43

Recording Automatically by Sensing Movements (AUTO REC)

............................................................................................ 45

Taking Group Shots (Self-timer) ............................................ 46

Setting the USER Button ....................................................... 47

Remaining Recording Time/Battery Power ............................ 48

Editing

Deleting Unwanted Files ........................................................ 57

Deleting the Currently Displayed File ................................. 57

Deleting Selected Files ...................................................... 57

Protecting Files ...................................................................... 58

Protecting/Releasing Protection of the Currently Displayed File

........................................................................................ 58

Protecting/Releasing Protection of Selected Files .............. 58

Capturing a Still Image in the Video during Playback ............. 59

Combining Videos Recorded by Seamless Recording .......... 60

Capturing a Required Part in the Video (TRIMMING) ............ 61

Capturing Videos for Uploading to YouTube .......................... 62

Copying

Creating a Disc Using a Connected Blu-ray Recorder ........... 63

Dubbing Files by Connecting to a DVD Recorder or VCR

............................................................................................ 63

Dubbing Files to a VHS Tape Using a VCR ........................... 64

Copying Files to an SD Card .................................................. 65

Moving Files to an SD Card ................................................... 66

Copying to Windows PC ........................................................ 67

Verifying System Requirements (Guideline) ....................... 67

Installing the Provided Software (Built-in) ........................... 67

Backing Up All Files ........................................................... 69

Organizing Files ................................................................. 70

Recording Videos to Discs ................................................. 71

Backing Up Files Without Using Provided Software ........... 72

List of Files and Folders ..................................................... 72

Copying to Mac Computer ..................................................... 73

Menu Settings

Operating the Menu ............................................................... 74

Operating the Common Menu ............................................ 74

Operating the Main Menu ................................................... 74

Operating the Face Short Cut Menu ................................... 74

Main Menu for Video Recording ............................................ 76

SCENE SELECT ................................................................ 77

FOCUS .............................................................................. 77

BRIGHTNESS ADJUST ..................................................... 77

WHITE BALANCE .............................................................. 77

BACKLIGHT COMP. .......................................................... 77

TELE MACRO .................................................................... 77

TOUCH PRIORITY AE/AF ................................................. 77

LIGHT (GZ-HM650/GZ-HM670/GZHM690) ....................... 78

DIS ..................................................................................... 78

GAIN UP ............................................................................ 78

WIND CUT ......................................................................... 79

ANIMATION EFFECT ........................................................ 79

TIME-LAPSE RECORDING ............................................... 79

AUTO REC ........................................................................ 79

FACE SUB-WINDOW ........................................................ 79

SMILE SHOT ..................................................................... 79

SMILE%/NAME DISPLAY .................................................. 79

FACE REGISTRATION ...................................................... 79

VIDEO QUALITY ................................................................ 80

ZOOM ................................................................................ 80

SEAMLESS RECORDING ................................................. 81

2

x.v.Color ............................................................................. 81

USER BUTTON SETTING ................................................. 81

Main Menu for Still Image Recording ..................................... 82

SCENE SELECT ................................................................ 83

FOCUS .............................................................................. 83

BRIGHTNESS ADJUST ..................................................... 83

WHITE BALANCE .............................................................. 83

BACKLIGHT COMP. .......................................................... 83

TELE MACRO .................................................................... 83

TOUCH PRIORITY AE/AF ................................................. 83

LIGHT (GZ-HM650/GZ-HM670/GZHM690) ....................... 84

SELF-TIMER ...................................................................... 84

GAIN UP ............................................................................ 84

AUTO REC ........................................................................ 84

SHUTTER MODE .............................................................. 84

SMILE SHOT ..................................................................... 85

SMILE%/NAME DISPLAY .................................................. 85

FACE REGISTRATION ...................................................... 85

IMAGE SIZE ....................................................................... 85

USER BUTTON SETTING ................................................. 85

Main Menu for Video Playback .............................................. 86

SEARCH DATE .................................................................. 86

PROTECT/CANCEL .......................................................... 86

COPY ................................................................................. 86

MOVE ................................................................................ 87

TRIMMING ......................................................................... 87

UPLOAD SETTINGS ......................................................... 87

PLAYBACK OTHER FILE .................................................. 87

SEAMLESS REC CTRL ..................................................... 87

K2 TECHNOLOGY ............................................................ 87

Main Menu for Still Image Playback ....................................... 88

SEARCH DATE .................................................................. 88

SLIDE SHOW EFFECTS ................................................... 88

PROTECT/CANCEL .......................................................... 89

COPY ................................................................................. 89

MOVE ................................................................................ 89

Common Menu ...................................................................... 90

CLOCK ADJUST ................................................................ 91

DATE DISPLAY STYLE ..................................................... 91

LANGUAGE ....................................................................... 92

MONITOR BRIGHTNESS .................................................. 92

REC MEDIA FOR VIDEO (GZ-HM450/GZ-HM650/GZ-

HM670/GZ-HM690) ....................................................... 93

REC MEDIA FOR IMAGE (GZ-HM450/GZ-HM650/GZ-

HM670/GZ-HM690) ....................................................... 93

REC VIDEO TO SLOTS (GZ-HM440) ................................ 94

REC STILLS TO SLOTS (GZ-HM440) ............................... 94

OPERATION SOUND ........................................................ 95

AUTO POWER OFF ........................................................... 95

QUICK RESTART .............................................................. 96

DEMO MODE .................................................................... 96

TOUCH SCREEN ADJUST ............................................... 96

DISPLAY ON TV ................................................................ 97

VIDEO OUTPUT ................................................................ 98

COMPONENT OUTPUT .................................................... 98

HDMI OUTPUT .................................................................. 99

HDMI CONTROL ............................................................... 99

FACTORY PRESET ......................................................... 100

UPDATE .......................................................................... 100

PC SOFTWARE UPDATE ............................................... 100

FORMAT BUILT-IN MEM. (GZ-HM450/GZ-HM650/GZ-

HM670/GZ-HM690) ..................................................... 101

FORMAT SD CARD ......................................................... 101

ERASE ALL DATA (GZ-HM450/GZ-HM650/GZ-HM670/GZ-

HM690) ........................................................................ 102

Indications on the LCD monitor

Common Recording Indications .......................................... 106

Video Recording .................................................................. 106

Still Image Recording ........................................................... 107

Video Playback .................................................................... 107

Still Image Playback ............................................................ 108

Troubleshooting

Battery Pack ........................................................................ 109

Recording ............................................................................ 109

Card ..................................................................................... 110

Playback .............................................................................. 110

Editing/Copying ................................................................... 111

Computer ............................................................................. 111

Screen/Image ...................................................................... 112

Other Problems ................................................................... 112

Error Message? ................................................................... 113

Maintenance ............................................................... 115

Specifications ............................................................. 116

Names of Parts

Front .................................................................................... 103

Rear ..................................................................................... 103

Bottom ................................................................................. 104

Interior ................................................................................. 104

LCD Monitor ........................................................................ 105

3

Beginner's Guide

Charging

Refer to the operating instructions found in the animation on the Detailed

0

User Guide.

Recording

Refer to the operating instructions found in the animation on the Detailed

0

User Guide.

Playback

Refer to the operating instructions found in the animation on the Detailed

0

User Guide.

Shooting Tips

Basic Way to Hold a Camcorder
~ Recording Stable Images ~

This is the standard way of shooting while standing up.
Be sure to master this basic technique in order to achieve stable images.

[Getting Ready]

o

A Open your feet to the width of your shoulders.
B Keep the elbow of your right arm, which is holding the camcorder, close

to your side.

C Hold the LCD monitor with your left hand and adjust the angle

accordingly.

.

Extending Your Hands to Shoot
~ High-Angle Shooting ~

Extend your hand when your subject is being hidden behind a crowd of
people.

[Getting Ready]

o

A Open your feet to the width of your shoulders.
B Extend your right hand and hold the camcorder over your head.
C Hold the LCD monitor with your left hand and adjust the angle

accordingly.

.

Caution :

Use this way of shooting only as a last resort as it is difficult to achieve

0

stable images.
Set to the wide angle as much as possible as the image will be prone to

0

camera shake.
Be considerate. Do not inconvenience the people around you.

0

4

Useful Shooting Techniques

Squatting and Shooting at Eye Level

Staying low is a common position to take when shooting small children.
By recording from the eye level of the child, you can capture all his cute
expressions clearly.

[Getting Ready]

o

A Kneel down with your left knee while keeping your right foot on the

ground.

B Place the elbow of your right arm, which is holding the camcorder, on

your right knee.

C Hold the LCD monitor with your left hand and adjust the angle

accordingly.

.

Panning

Refer to the operating instructions found in the animation on the Detailed

0

User Guide.

Use this method to shoot a wide angle of view.

[Getting Ready]

o

A Shoot by rotating your body instead of moving your arms while keeping

the basic way of holding a camcorder as stated above.

B Stand facing the direction where the rotation will stop.
C Twist your upper body to the direction where recording will start.
D Press the start button and record for 2 seconds, then slowly twist back

your body to face the front.
Record for another 2 seconds while facing the front, then press the
stop button.
(The 90 degrees rotation should take about 5 seconds, giving the
feeling of a slow motion.)

Holiday Season/Christmas

Record the happy Christmas celebration with your family!

.

Decorating the Tree and Preparing the Dinner

The decoration of tree and preparation of dinner are part of the joy of
Christmas. Be sure to record these happy family times!

Decorating the tree

o

A tree is the most important thing to bring out the mood of Christmas.
Simply the scene of all family members engaging in the decorating of a fir
tree with various colorful ornaments is full of the feeling of happiness.

Preparing the Dinner

o

Record the scenes as everyone helps to prepare the feast of the night.
You can film the mother who is cooking, the children who are helping, and
of course, the process of making a cake!

.

.

5

Useful Shooting Techniques

Recording the Christmas Party

.

After all preparations, it is finally the Christmas party itself.
Not only should you record the candle-blowing scene, but also the smiles of
the family while being surrounded by good food, or even the father who is
slightly drunk from champagne!

Finding the Presents

Wedding

Create an awesome wedding video for the bride and groom!

.

Discussing and Planning Before the Event

Before the day of the wedding reception, it is important to discuss with the
bride and groom about various details such as the order of the ceremony
and whether there are any entertainment programs or change of clothes.
By understanding the preferences of the bride and groom, you will be able
to shoot more appropriately.

Finding out the route of entrance

o

For children, the greatest joy of Christmas is receiving presents the next

.

morning.
Their expression of delight when finding a present next to their pillow is a
recording opportunity not to be missed. Get ready to shoot before the
children wake up!

The highlight of a wedding reception is the entrance of the bride and groom.

.

Find out which door they will enter from and the route they will take from the
person-in-charge of the wedding hall in advance. Set up the tripod at a place
where you can follow the couple using zoom without having to move around.

Number of times and timing of clothes-changing

o

Find out the timing of any changing of clothes so as to capture the scene well
when the bride and groom enter again.
You can also make use the time while the bride and groom are changing to
record comments of well wishes from the guests.

Finding the Right Angle to Capture Both Bride and Groom

Composing the picture with the groom in front and the

o

guests at the back

The main characters of a wedding are of course the bride and groom. Record

.

their expressions clearly during the toast, speech, entertainment programs,
and other scenes.
Another recommendation is to capture the face shots of the guests, then pan
towards the groom. Picture composition containing the crowd of guests only
lacks fun, so be sure to pay attention to the shooting angle and size.

6

Useful Shooting Techniques

Recording the Expressions and Comments of Guests

Setting the shot from eye level to chest level

o

.

You can record comments from the guest by going around asking, "Please
say a few words for the bride and groom".
This can be done at the guests' waiting room, when the bride and groom are
changing, or during the entertainment programs.

Closing Up on the Bride's Face During the Thank You Speech

The climax of the event finally comes during the bride and groom’s thank you
speech and presentation of flowers. The touching words of appreciation from
the bride and tears of joy from the parents are scenes that must not be
missed.
Start by closing up on the bride’s face using zoom. As the tears start to form
in the bride’s eyes, continue shooting for a little longer. Then, slowly zoom
out to the wide angle to show the parents who are moved by the speech.

Advanced Operation with Two Camcorders

If video-editing is to be done, record using two camcorders so that a video
with varying scenes can be created. You can try asking a close friend who
has a camcorder at home.
Set the borrowed camcorder on a tripod to focus on taking close-up shots
of the bride and groom. In this way, the other camcorder can be moved
around to record other scenes, enabling an interesting video with changing
scenes to be created through editing and compilation.
As most people own at least a digital camera nowadays, even if you are really
unable to find an extra camcorder, inserting still pictures to the video at
various points is also a good way to add variety. Do give it a try!

<Camcorder 1>

o

Closing up on the bride and groom all the time

Travel

Capture all the good times of your domestic or overseas trips!

.

Bringing the Necessary Equipment

The necessary things to bring on a trip depends on your traveling purpose
and the destination.
For overseas trips in particular, you have to think about what to bring in
accordance to the local conditions.
Here are some suggestions for your consideration.

Camcorder

o

Think about how many hours of shooting you will usually perform in a day.
Be sure to prepare enough recording medium especially for long overseas
trips.
If you are recording in SD cards, get ready the sufficient number of cards,
including some for backup.

Battery Pack

o

Prepare a battery pack that is ready for double the expected recording time
in a day. For example, if you plan to record for 2 hours a day, prepare a
battery pack that is ready for 4 hours (actual recording time).
For a day trip, you can prepare a battery with low capacity but for a long trip,
do prepare a few batteries with high capacities.

AC Adapter

o

The JVC AC adapter supports voltages from 100 V to 240 V, and hence can
be used anywhere in the world.
Bring along the adapter if you are traveling for a long time. Charge the battery
pack while sleeping so that you can record with full battery power the next
day.

Power Plug Adapter

o

.

<Camcorder 2>

o

Recording the congratulatory messages from friends at the
same time

.

The shape of the power plug varies according to countries. Be sure to check

.

the shape of the power plug beforehand, and bring the appropriate power
plug adapter.
“Charging the Battery Pack Overseas” (A p. 23)

7

Useful Shooting Techniques

Battery Charger

o

Using Pan at the Places of Interest

Tourists spots with beautiful scenery or historical sites are places that you
would certainly want to record.
To capture the magnificence of a scene which cannot be fitted into a single
frame, try the panning technique.
Refer to the "Shooting Tips" found in this website on how to use panning
effectively.
In addition, you may also like to take a shot of the signs or monuments that
can often be found at the tourist spots.

Recording cannot be performed when an AC adapter is connected to the

.

camcorder for battery charging.
You can bring an additional battery charger to charge battery packs if you
plan to use the camcorder for recording at night. You can also charge
multiple battery packs by using both the battery charger and this camcorder
at the same time.

Tripod

o

.

A tripod is an essential item to take stable images. Select an appropriate
tripod in accordance to your purpose and style of traveling, such as a
compact one to be used on a table or one that is at least 1 m tall.

Recording the Excitement Before Departure

It may be a little abrupt to start your travel video at the destination suddenly.
Record also the preparations prior to departure if it is a family trip, or the time
when everyone is gathered at the meeting place if you are traveling with your
friends.
For overseas trips, taking a shot of the signs and displays at the airport of
the flight you are taking may be useful for future reference.

.

.

Showing Everyone Having a Good Time

When taking a video, it is rather dull to shoot only the scenery or historical
sites.
Talk about your feelings while recording the breath-taking scenery of an
attraction so that it will be an interesting scene to view later.

.

.

8

Useful Shooting Techniques

Amusement Park

Take more shots of the smiling faces of everyone in the family!

.

Taking Videos or Still Images According to the Attraction

You may choose to take videos all the time. However, you may want to take
some still images too.
The following section explains the scenarios suitable for taking videos or still
images.

Scenarios suitable for taking videos

o

Inducing Responses by Calling Out

.

Videos with no waving of hands nor laughter are not only dull when you view
them later, but also put the capability of the audio-recording function of the
camcorder to a waste.
When recording, induce more reactions by enthusiastically waving your
hands or shouting out "Is it fun?" and the like.

Capturing the Best Moment in a Video as a Still Image

.

Shots with the eyes closed are often taken by accident. To reduce such
mistakes, make use of the function to capture still images from videos.
As videos are actually continuous recording of 60 still images within 1 minute,
using this function allows you to select the best moment and save it as a still
image.
“Capturing a Still Image in the Video during Playback” (A p. 59)

Scenarios with changes in body movement are suitable for taking videos.

.

This includes situations where there are rapid changes in facial expressions
or voices of surprise and delight.
*Some amusement parks do not allow passengers to perform any recording.
Be sure to check beforehand.
[Examples]

Merry-go-round, go kart, coffee cup, etc.

0

Scenarios suitable for taking still images (photos)

o

.

Scenarios with little movement of the subject are suitable for taking still
images.
Try to take the still images from an angle such that the surroundings can be
seen clearly.
[Examples]

Carousal, ferris wheel, fun bicycle rides, etc.

0

Advanced Operation with Backlight Compensation

When the subject’s face is in backlight or when the expression cannot be
seen clearly, the Intelligent Auto function of this unit automatically increases
its brightness for recording.
If Intelligent Auto fails to function as expected or if the brightness correction
is insufficient, you can increase the brightness by using backlight
compensation in the Manual mode.
“Setting Details” (A p. 34)

<Without backlight compensation>

o

.

<With backlight compensation>

o

.

9

Getting Started

Key Features

Key features of your camcorder

Full High Definition (1920×1080 pixels) Video Recording

1

3.2 M (2400×1344 pixels) Still Image Recording (GZ-HM670/GZ-

2

HM650)

i.AUTO (Intelligent Auto Recording): Detects 12 types of pre-set scenes

3

“Scenes of Intelligent Auto” (A p. 26)

2.7” Touch Screen

4

“Using the Touch Screen” (A p. 19)

Enhanced Digital Image Stabilizer

5

“Reducing Camera Shake” (A p. 43)

40x Optical Zoom

6

“ZOOM” (A p. 80)

Personal Authentication and Face Registration: Registering Human

7

Face Personal Authentication Information

“Registering Human Face Personal Authentication Information”
(A p. 36)

Zoom-in Picture: Record while viewing both overall and zoomed-in

8

images

“Recording while Displaying a Magnified View of a Selected Face
(FACE SUB-WINDOW)” (A p. 42)

Smile Shot: Just smile and your happy face will be automatically

9

detected and captured!

“Capturing Smiles Automatically (SMILE SHOT)” (A p. 41)

TOUCH PRIORITY AE/AF: Coordinate exposure and focus area through

10

face or color tracking

“Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 40)

Auto Recording: Automatically starts recording when subject enters the

11

detecting area

“Recording Automatically by Sensing Movements (AUTO REC)”
(A p. 45)

Time-lapse Recording: Watch long hours of recording in a few seconds

12

“Recording at Intervals (TIME-LAPSE RECORDING)” (A p. 43)

Fun Animation Effects for Recording

13

“Creating Animation Effects (ANIMATION EFFECT)” (A p. 35)

Eye-Fi Card Ready: Upload Videos through your home Wi-Fi networks

14

“Using an Eye-Fi Card” (A p. 16)

Easy Uploading to YouTube with the supplied software Everio

15

MediaBrowser 3

“Copying to Windows PC” (A p. 67)

10

Model Differences

Confirm the model name of your camcorder.

Getting Started

Model Recording

Media

GZ-HM440 SDHC/SDXC - Dual SD - 1/5.8" 1.50M

GZ-HM450 SDHC/SDXC/

Built-in
Memory

GZ-HM650 SDHC/SDXC/

Built-in
Memory

GZ-HM670 SDHC/SDXC/

Built-in
Memory

GZ-HM690 SDHC/SDXC/

Built-in
Memory

Built-in

Memory

8 GB SD - 1/5.8" 1.50M

8 GB SD Light 1/4.1" 3.32M

32 GB SD Light 1/4.1" 3.32M

64 GB SD Light 1/4.1" 3.32M

Memory Card

Slot

LED Light Image

Sensor

CMOS

CMOS

BSI CMOS

BSI CMOS

BSI CMOS

Pict. Size

(16:9)

Max. Pict.

Size

(Super

Resolution)

2M

2M Built-in

2M (SR 3.2M) Built-in

2M (SR 3.2M) Built-in

2M (SR 3.2M) Built-in

Seamless

Recording

Slot A N Slot B Slot A N Slot B

memory N SD
card

memory N SD
card

memory N SD
card

memory N SD
card

Copy/Move

Files

Built-in
memory N SD
card

Built-in
memory N SD
card

Built-in
memory N SD
card

Built-in
memory N SD
card

11

Getting Started

Verifying the Accessories

If any of the items are missing or defective, consult your JVC dealer or the nearest JVC service center.

Illustration Description

AC Adapter
AC-V11U

Connects to this unit to charge the battery pack.

0

It can also be used when recording or playing back videos indoors.

.

Battery Pack
BN-VG114U

Attaches to this unit to supply power.

0

.

AV Cable

Connects this unit to a TV to play back recorded images on the TV.

0

.

USB Cable
(Type A - Mini Type B)

Connects this unit to a computer.

0

.

Basic User Guide

Read well and keep in a safe place where it can be accessed easily when necessary.

0

.

Memo :

SD cards are sold separately.

0

“Types of Usable SD Card” (A p. 15)
“Using an Eye-Fi Card” (A p. 16)

When using the AC adapter overseas, please prepare a commercially available converter plug for the country or region of visit.

0

“Charging the Battery Pack Overseas” (A p. 23)

12

Charging the Battery Pack

Charge the battery pack immediately after purchase and when the remaining
battery power is low.
The battery pack is not charged at the time of purchase.

Attach the battery pack.

1

Getting Started

You can connect this unit to the AC adapter to record for long hours

0

indoors.
(Battery charging begins when the LCD monitor is closed.)

Detaching the Battery Pack

.

Align the top of the battery with the mark on this unit, and slide in until

0

the battery clicks into place.

Connect the AC adapter to the DC connector.

2

.

Plug in the power.

3

.

The charging lamp blinks when charging is in progress.

0

It goes out when charging is finished.

Caution :

Be sure to use JVC battery packs.

If you use any other battery packs besides JVC battery packs, safety and

0

performance cannot be guaranteed.
Charging time: Approx. 2 h 30 m (using supplied battery pack)

0

The charging time is when the unit is used at 25°C (77°F). If the battery
pack is charged outside the room temperature range of 10°C to 35°C (50°F
to 95°F), charging may take a longer time or it may not start. The
recordable and playable time may also be shortened under some usage
conditions such as at low temperature.

Be sure to use the supplied JVC AC adapter.

If you use any other AC adapters besides the supplied JVC AC adapter,

0

malfunctions may occur.

Slide the battery release lever to detach the battery from this unit.

.

Approximate Battery Charging Time (Using AC Adapter)

Battery Pack Charging Time

BN-VG114U
(Supplied)

BN-VG121U 3 h 30 m

BN-VG138U 6 h 10 m

When the battery life is reached, the recording time becomes shorter even

0

if the battery pack is fully charged.
(Replace the battery pack with a new one.)

* The charging time is when the unit is used at 25°C (77°F). If the battery
pack is charged outside the room temperature range of 10°C to 35°C (50°F
to 95°F), charging may take a longer time or it may not start. The recordable
and playable time may also be shortened under some usage conditions such
as at low temperature.
“Approximate Recording Time (Using Battery)” (A p. 49)

2 h 30 m

Charging with USB Cable

Close the LCD monitor to turn off the camcorder and disconnect the AC

1

adapter as well as battery pack from the camcorder.

Turn on the computer and connect the USB cable to the camcorder.

2

Rechargeable Batteries：

When using the battery in a low temperature environment (10°C (50°F) or

0

below), the operating time may be shortened, or it may not function
properly. When using this unit outdoors in the winter weather, warm the
battery, such as by placing it in the pocket, before attaching it. (Keep away
from direct contact with a warm pack.)

Do not expose the battery to excessive heat, such as direct sunlight or fire.

0

After removing the battery, store it in a dry place between 15°C to 25°C

0

(59°F to 77°F).

0

Keep a 30 % battery level (X) if the battery pack is not to be used for a
long period of time. In addition, fully charge and then fully discharge the
battery pack every 2 months, then continue to store it at a 30 % battery

level (X).

Memo :

.

Do not attach the battery pack before connecting the USB cable.

0

Attach the battery pack.

3

The charging lamp blinks when charging is in progress.

0

It goes out when charging is finished.

Memo :

USB charging is not possible while the AC adapter is connected to the

0

camcorder.
Do not turn off or set the computer to sleep mode during charging (the

0

charging will stop).
With some types of computers, charging is possible even when the

0

computer is turned off. Refer to the instruction manual of the computer or
consult its manufacturer.

13

Getting Started

Charging is also possible with an optional USB AC adapter (AC-V10L). If

0

you use any other USB AC adapters besides JVC AC adapters, safety
and performance cannot be guaranteed.

If charging does not start, detach the battery pack and try again from step

0

1.
You cannot record or play back videos while the camcorder is connected

0

to a computer. Disconnect the USB cable after charging.

Approximate Battery Charging Time (Using USB Cable)

Battery Pack Charging Time

BN-VG114U
(Supplied)

BN-VG121U 25 h

BN-VG138U 45 h 30 m

18 h 30 m

Grip Adjustment

.

A Open the lever on the strap lock
B Adjust the length of the belt
C Close the lever

Caution :

Be sure to fasten the grip belt properly.

0

If the belt is loose, this unit may drop and result in injuries or damages.

Using as a Hand Strap

Adjust the length of the belt and loop it around your wrist.

.

14

Getting Started

Inserting an SD Card (GZ-HM450/GZ-HM650/ GZ-HM670/GZ-HM690)

When a commercially available SD card is inserted, recordings can still be
made to the card without stopping when the remaining recording time on the
built-in memory runs out.
“Types of Usable SD Card” (A p. 15)
“Using an Eye-Fi Card” (A p. 16)
“Approximate Video Recording Time” (A p. 49)

Close the LCD monitor.

1

.

Open the cover.

2

Removing the Card

Push the SD card inward once, then pull it out straight.

.

Types of Usable SD Card

The following SD cards can be used on this unit.
Operations are confirmed on the SD cards from the following manufacturers.

Panasonic

0

TOSHIBA

0

SanDisk

0

Eye-Fi

0

SD Card

.

Insert an SD card.

3

.

Insert with the label facing outward.

0

Warning

Make sure not to insert the card in the wrong direction.

0

It may cause damage to the unit and card.
Turn off the power of this unit before inserting or removing a card.

0

Do not touch the metal contact area when inserting the card.

0

Memo :

When “SEAMLESS RECORDING” is set to “ON”, recordings can still be

0

made to the SD card without stopping when the remaining recording time
on the built-in memory runs out.

“SEAMLESS RECORDING” (A p. 81)

To record to the card, it is necessary to perform media settings.

0

When no card is available, set media settings to “BUILT-IN MEMORY” for
recording.

“REC MEDIA FOR VIDEO (GZ-HM450/GZ-HM650/GZ-HM670/GZ­HM690)” (A p. 93)
“REC MEDIA FOR IMAGE (GZ-HM450/GZ-HM650/GZ-HM670/GZ­HM690)” (A p. 93)

To use cards that have been used on other devices, it is necessary to

0

format (initialize) the card using “FORMAT SD CARD” from media
settings.

“FORMAT SD CARD” (A p. 101)

.

This unit supports 256 MB to 2 GB SD cards.

0

Use a Class 4 or higher compatible SD card (2 GB) for video recording.

0

SDHC Card

.

Use a Class 4 or higher compatible SDHC card (4 GB to 32 GB) for video

0

recording.

15

Getting Started

SDXC Card

.

Use a Class 4 or higher compatible SDXC card (Max. 64 GB).

0

Memo :

Using SD cards (including SDHC/SDXC cards) other than those specified

0

above may result in recording failure or data loss.
To record videos with “VIDEO QUALITY” set to “UXP”, use of a Class 6

0

compliant SDHC/SDXC card is recommended.
Class 4 and Class 6 are guaranteed to have a minimum transfer rate of 4

0

MB/s and 6 MB/s respectively during reading or writing of data.
You can also use a Class 10 compliant SDHC/SDXC card.

0

To protect the data, do not touch the terminals of the SD card.

0

Using an Eye-Fi Card

Eye-Fi is an SD memory card with wireless LAN function.
Using an Eye-Fi card, you can transfer videos and still images to a computer
or the web. (A broadband wireless LAN environment is required.)
Use of Eye-Fi card may be illegal and prohibited in countries and regions
where it has not been approved by competent authorities. Please contact
Eye-Fi support for the details of approved countries and regions.

Types of Cards

The following Eye-Fi cards can be used on this unit.
Eye-Fi X2 Series

Eye-Fi Connect X2

0

Eye-Fi Explore X2

0

Eye-Fi Pro X2

0

Using the Eye-Fi Card

Make settings on the Eye-Fi card with Eye-Fi Center.
For how to install and operate the Eye-Fi Center, refer to its instruction
manual.

Recorded videos and still images are automatically transferred. (The files

0

already transferred earlier are not transferred again.)

Memo :

You cannot transfer files during the recording mode, editing and formatting

0

of the card.
You cannot transfer video files larger than 2 GB. (as of December, 2010)

0

Transfer may take long or be interrupted depending on the connection

0

conditions.

When your computer cannot recognize the SDXC card

Confirm and update the OS of your computer.

Windows XP /
Windows XP
SP1

Windows XP
SP2 / Windows
XP SP3

Windows Vista Necessary to update to SP1 or higher.

Windows Vista
SP1 / Windows
Vista SP2

Windows 7 Necessary to download the update software.

Necessary to update to SP2 or higher.

Necessary to download the update software.
(KB955704)

http://www.microsoft.com/downloads/details.aspx?
FamilyID=1cbe3906-ddd1-4ca2-b727­c2dff5e30f61&displaylang=en

Necessary to download the update software.
(KB975823)

32 bit version

0

http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=2d1abe01-0942-4f8a­abb2-2ad529de00a1

64 bit version

0

http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=7d54c53f-017c-4ea5­ae08-34c3452ba315

(KB976422)

32 bit version

0

http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=3ee91fc2-a9bc-4ee1­aca3-2a9aff5915ea

64 bit version

0

http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=73f766dd-7127-4445­b860-47084587155f

Icon Description

M

O

O

We recommend using the AC adapter when transferring files of large size.

0

If it doesn’t operate properly, first make use of Eye-Fi Helper to confirm

0

that the settings of the Eye-Fi card are correct. In addition, try the data
transfer by inserting the Eye-Fi card into other equipment such as a
computer.

Do not use the camcorder in places where wireless use is prohibited such

0

as on a plane.
Before deleting a file, check that you have transferred it to a computer or

0

uploaded it to a video sharing website.
For the latest information on the Eye-Fi card, refer to the website of Eye-

0

Fi, Inc.

http://www.eye.fi/

Identifying the Eye-Fi card

Ready for transfer from the Eye-Fi card

Transferring from the Eye-Fi card (animated)

Mac OS X 10.4
Tiger / Mac OS X

10.5 Leopard

Mac OS X 10.6
Snow Leopard

16

Not compatible.

Necessary to upgrade to 10.6.5.

Inserting an SD Card (GZ-HM440)

Insert a commercially available SD card before recording.
This unit comes with two SD card slots. When two SD cards are inserted,
recordings can be continued on the other card even if one card is full.
“Types of Usable SD Card” (A p. 17)
“Using an Eye-Fi Card” (A p. 18)
“Approximate Video Recording Time” (A p. 49)

Close the LCD monitor.

1

.

Open the cover.

2

Getting Started

.

Types of Usable SD Card

The following SD cards can be used on this unit.
Operations are confirmed on the SD cards from the following manufacturers.

Panasonic

0

TOSHIBA

0

SanDisk

0

Eye-Fi

0

SD Card

.

Insert an SD card into slot A.

3

.

Insert with the label facing outward.

0

Caution :

Make sure not to insert the card in the wrong direction.

0

It may cause damage to the unit and card.
Turn off the power of this unit before inserting or removing a card.

0

Do not touch the metal contact area when inserting the card.

0

Memo :

Recording switches automatically from slot A to slot B after the card in slot

0

A is full.

“SEAMLESS RECORDING” (A p. 81)

To record to the card, it is necessary to perform media settings.

0

“REC VIDEO TO SLOTS (GZ-HM440)” (A p. 94)
“REC STILLS TO SLOTS (GZ-HM440)” (A p. 94)

To use cards that have been used on other devices, it is necessary to

0

format (initialize) the card using “FORMAT SD CARD” from media
settings.

“FORMAT SD CARD” (A p. 101)

.

This unit supports 256 MB to 2 GB SD cards.

0

Use a Class 4 or higher compatible SD card (2 GB) for video recording.

0

SDHC Card

.

Use a Class 4 or higher compatible SDHC card (4 GB to 32 GB) for video

0

recording.

Removing the Card

Push the SD card inward once, then pull it out straight.

17

Getting Started

SDXC Card

.

Use a Class 4 or higher compatible SDXC card (Max. 64 GB).

0

Memo :

Using SD cards (including SDHC/SDXC cards) other than those specified

0

above may result in recording failure or data loss.
To record videos with “VIDEO QUALITY” set to “UXP”, use of a Class 6

0

compliant SDHC/SDXC card is recommended.
Class 4 and Class 6 are guaranteed to have a minimum transfer rate of 4

0

MB/s and 6 MB/s respectively during reading or writing of data.
You can also use a Class 10 compliant SDHC/SDXC card.

0

To protect the data, do not touch the terminals of the SD card.

0

Using an Eye-Fi card, you can transfer videos and still images to a computer
or the web. (A broadband wireless LAN environment is required.)
Use of Eye-Fi card may be illegal and prohibited in countries and regions
where it has not been approved by competent authorities. Please contact
Eye-Fi support for the details of approved countries and regions.

Types of Cards

The following Eye-Fi cards can be used on this unit.
Eye-Fi X2 Series

Eye-Fi Connect X2

0

Eye-Fi Explore X2

0

Eye-Fi Pro X2

0

Video and still image files cannot be transferred without the Eye-Fi X2 series.

Using the Eye-Fi Card

Make settings on the Eye-Fi card with Eye-Fi Center.
For how to install and operate the Eye-Fi Center, refer to its instruction
manual.

Recorded videos and still images are automatically transferred. (The files

0

already transferred earlier are not transferred again.)

Memo :

You cannot transfer files during the recording mode, editing and formatting

0

of the card.
You cannot transfer video files larger than 2 GB. (as of December, 2010)

0

Transfer may take long or be interrupted depending on the connection

0

conditions.

Icon Description

When your computer cannot recognize the SDXC card

Confirm and update the OS of your computer.

Windows XP /
Windows XP
SP1

Windows XP
SP2 /
Windows XP
SP3

Windows
Vista

Windows
Vista SP1 /
Windows
Vista SP2

Windows 7 Necessary to download the update software.

Necessary to update to SP2 or higher.

Necessary to download the update software.
(KB955704)

http://www.microsoft.com/downloads/details.aspx?
FamilyID=1cbe3906-ddd1-4ca2-b727­c2dff5e30f61&displaylang=en

Necessary to update to SP1 or higher.

Necessary to download the update software.
(KB975823)

32 bit version

0

http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=2d1abe01-0942-4f8a­abb2-2ad529de00a1

64 bit version

0

http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=7d54c53f-017c-4ea5­ae08-34c3452ba315

(KB976422)

32 bit version

0

http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=3ee91fc2-a9bc-4ee1­aca3-2a9aff5915ea

64 bit version

0

http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=73f766dd-7127-4445­b860-47084587155f

M

O

O

We recommend using the AC adapter when transferring files of large size.

0

If it doesn’t operate properly, first make use of Eye-Fi Helper to confirm

0

that the settings of the Eye-Fi card are correct. In addition, try the data
transfer by inserting the Eye-Fi card into other equipment such as a
computer.

Do not use the camcorder in places where wireless use is prohibited such

0

as on a plane.
Before deleting a file, check that you have transferred it to a computer or

0

uploaded it to a video sharing website.
For the latest information on the Eye-Fi card, refer to the website of Eye-

0

Fi, Inc.

http://www.eye.fi/

Identifying the Eye-Fi card

Ready for transfer from the Eye-Fi card

Transferring from the Eye-Fi card (animated)

Mac OS Not compatible.

Using an Eye-Fi Card

Eye-Fi is an SD memory card with wireless LAN function.

18

Using the Touch Screen

Icon operation buttons, thumbnails, and menu items are displayed on the
touch screen according to the mode in use.

There are two ways to operate the touch screen, namely “tap” and “drag”.

0

The following are some examples.

A Tap the displayed button (icon) or thumbnail (file) on the touch screen
to make selection.
B Drag the thumbnails on the touch screen to search for the desired file.

.

Memo :

The touch screen of this unit is pressure-sensitive. When the touch screen

0

does not respond smoothly, apply slightly more force to your fingertip.
Tap the buttons (icons) on the touch screen accurately. The buttons may

0

not respond if they are not tapped on the right area.
Do not press or rub with excessive force.

0

If you apply a protect sheet or a sticker, the touch screen may not respond

0

smoothly.
Do not operate the touch screen using an object with a sharp or hard tip.

0

Pressing two or more places at a time may cause a malfunction.

0

Perform “TOUCH SCREEN ADJUST” if the reactive area of the screen is

0

misaligned with the touched area. (Adjust by lightly tapping with a corner
of an SD card, etc. Do not press with an object with a sharp tip or do not
press hard.)

“TOUCH SCREEN ADJUST” (A p. 96)

Names of Buttons and Functions on the LCD Monitor

The following screens are displayed during the video and still image modes,
and operate as the touch screens.

Recording Screen (Video/Still Image)

Getting Started

0

Tap and hold n button
Displays are fixed such that they do not disappear. After setting, the

display button changes from n to m.
Tap m to release the displays.

Playback Screen (Video)

.

Recording Mode Button

1

Switches to the recording mode.

0

Index Screen Button

2

“Operation Buttons for Video Playback” (A p. 50)

Delete Button

3

“Deleting the Currently Displayed File” (A p. 57)

Volume Adjustment Button

4

“Adjusting the Volume of Videos” (A p. 51)

Menu Button

5

“Operating the Menu” (A p. 74)

Operation Buttons

6

“Operation Buttons for Video Playback” (A p. 50)

Playback Screen (Still Image)

.

Face Short Cut Menu Button

1

Displays a short cut screen of face recognition functions.

0

“Operating the Face Short Cut Menu” (A p. 74)

Zoom Button

2

“Zooming” (A p. 28)

Playback Mode Button

3

Switches to the playback mode.

0

Recording Start/Stop Button

4

g: Video Recording Start Button

0
0

a: Video Recording Stop Button

0

Q: Still Image Recording Button

Menu Button

5

“Operating the Menu” (A p. 74)

Display Button

6

Some displays disappear after approximately 3 seconds.
Use the n button to change the displays as shown below.

0

Tap n button
Displays appear for approximately 3 seconds with every tap.

.

Recording Mode Button

1

Switches to the recording mode.

0

Index Screen Button

2

“Operation Buttons for Still Image Playback” (A p. 52)

Delete Button

3

“Deleting the Currently Displayed File” (A p. 57)

Menu Button

4

“Operating the Menu” (A p. 74)

Operation Buttons

5

“Operation Buttons for Still Image Playback” (A p. 52)

19

Getting Started

Index Screen

.

Date Button

1

“Operation Buttons for Video Playback” (A p. 50)
“Operation Buttons for Still Image Playback” (A p. 52)

Recording Mode Button

2

Switches to the recording mode.

0

Delete Button

3

“Deleting Selected Files” (A p. 57)

Playback Media Button

4

Switches between SD card and built-in memory or slot A and slot B

0

(GZ-HM440).

Menu Button

5

“Operating the Menu” (A p. 74)

Page Forward/Back Button

6

“Operation Buttons for Video Playback” (A p. 50)
“Operation Buttons for Still Image Playback” (A p. 52)

Clock Setting

The “SET DATE/TIME!” screen appears when you turn on this unit for the
first time after purchase, when it has not been used for a long time, or when
the clock is not set yet.
Set the clock before recording.

Open the LCD monitor.

1

.

The unit turns on.

0

When the LCD monitor is closed, the unit turns off.

0

Tap “YES” when “SET DATE/TIME!” is displayed.

2

.

Set the date and time.

3

Menu Screen

.

Help Button

1

Menu Items

2

Return Button

3

Common Menu Button

4

Close Button

5

“Operating the Menu” (A p. 74)

.

When the year, month, day, hour, or minute item is tapped, “∧” and

0

“∨” will be displayed.
Tap ∧ or ∨ to adjust the year, month, day, hour, and minute.

0

After setting the date and time, tap “SET”.

4

Select the region where you live and tap “SAVE”.

5

.

The city name and time difference are displayed.

0

Tap < or > to select the city name.

0

Memo :

The clock can be reset again later.

0

“Resetting the Clock” (A p. 21)

When using this unit overseas, you can set it to the local time for recording.

0

“Setting the Clock to Local Time when Traveling” (A p. 23)

“SET DATE/TIME!” is displayed when you turn on this unit after it has not

0

been used for a prolonged period.
Connect the AC adapter for more than 24 hours to charge the internal clock
battery of this unit before setting the clock.

20

Resetting the Clock

Set the clock with “CLOCK ADJUST” from the menu.

Tap “MENU”.

1

.

2

Tap “Q”.

.

Tap “CLOCK ADJUST”.

3

.

The city name and time difference are displayed.

0

Tap < or > to select the city name.

0

Getting Started

.

Tap ∧ or ∨ to move upward or downward for more selection.

0

Tap “CLOCK SETTING”.

4

.

Set the date and time.

5

.

When the year, month, day, hour, or minute item is tapped, “∧” and

0

“∨” will be displayed.
Tap ∧ or ∨ to adjust the year, month, day, hour, and minute.

0

After setting the date and time, tap “SET”.

6

Select the region where you live and tap “SAVE”.

7

21

Getting Started

Changing the Display Language

The language on the display can be changed.

Tap “MENU”.

1

.

2

Tap “Q”.

.

Tap “LANGUAGE”.

3

Holding this Unit

When holding this unit, keep your elbows close to your sides to prevent
camera shake.

.

Tap ∧ or ∨ to move upward or downward for more selection.

0

Tap to the desired language.

4

.

Tap ∧ or ∨ to move upward or downward for more selection.

0

.

Caution :

Be careful not to drop this unit during transportation.

0

Guardians should pay close attention when this unit is being used by

0

children.

Memo :

If camera shake is excessive, use the digital image stabilizer.

0

“Reducing Camera Shake” (A p. 43)

Tripod Mounting

This unit can be mounted on a tripod (or monopod). This is useful for
preventing camera shake and recording from the same position.

.

To prevent this unit from falling off, check the tripod mounting screw holes

0

and positioning holes on the unit carefully before mounting, and turn the
screws until they are fastened firmly.

Caution :

To prevent injuries or damages which may result if this unit falls off, read

0

the instruction manual of the tripod (or monopod) to be used and make
sure that it is securely attached.

Memo :

It is recommended to use a tripod or monopod when recording in

0

conditions prone to camera shake (such as in dark places or when zoomed
to the telephoto end).

Set the digital image stabilizer to Z (OFF) when using a tripod for

0

recording.

“Reducing Camera Shake” (A p. 43)

22

Getting Started

Using this Unit Overseas

The shape of the power outlet varies according to countries and regions.
To charge the battery pack, you need a converter plug that matches the
shape of the outlet.
“Charging the Battery Pack Overseas” (A p. 23)
Change the date and time display to the local time by selecting your travel
destination in “AREA SETTING” of “CLOCK ADJUST”.
“Setting the Clock to Local Time when Traveling” (A p. 23)
When “ON” is selected in “DST SETTING” of “CLOCK ADJUST”, the time is
set 1 hour ahead.
“Setting Daylight Saving Time” (A p. 24)

Charging the Battery Pack Overseas

The shape of the power outlet varies according to countries and regions.
To charge the battery pack, you need a converter plug that matches the
shape of the outlet.

Setting the Clock to Local Time when Traveling

Change the date and time display to the local time by selecting your travel
destination in “AREA SETTING” of “CLOCK ADJUST”.
Restore the region settings after you returned from the trip.

Tap “MENU”.

1

.

2

Tap “Q”.

.

Tap “CLOCK ADJUST”.

3

.

Tap ∧ or ∨ to move upward or downward for more selection.

0

Tap “AREA SETTING”.

4

.

.

Select the area you are traveling to and tap “SAVE”.

5

.

The city name and time difference are displayed.

0

Tap < or > to select the city name.

0

Memo :

Setting “AREA SETTING” changes the clock time such that time difference

0

is accounted for.
After returning to your country, re-select the region that was set initially to
restore the original clock settings.

23

Getting Started

Setting Daylight Saving Time

When “ON” is selected in “DST SETTING” of “CLOCK ADJUST”, the time is
set 1 hour ahead.

Tap “MENU”.

1

.

2

Tap “Q”.

.

Tap “CLOCK ADJUST”.

3

.

Tap ∧ or ∨ to move upward or downward for more selection.

0

Tap “DST SETTING”.

4

.

Tap “ON”.

5

.

Memo :

What is daylight saving time?

0

Daylight saving time is the system of setting the clock 1 hour ahead for a
fixed period in summer.
It is used mainly in the Western countries.

Restore the daylight saving time settings after you returned from the trip.

0

24

Optional Accessories

You can record for a longer time by using the optional battery pack.

Product Name Description

Getting Started

Battery Pack

BN-VG114U

0

BN-VG121U

0

BN-VG138U

0

Battery Charger

AA-VG1

0

Component Cable

QAM1266-001

0

HDMI Cable

VX-HD310ES

0

VX-HD315ES

0

VX-HD320

0

VX-HD330

0

Provides a longer recording time. It can also be used as a spare battery pack.

0

Enables the battery pack to be charged without using this unit.

0

For viewing in high picture quality.

0

Consult your nearest JVC service center.

0

For viewing in high picture quality.

0

Transmits video, audio, and control signals between devices.

0

Memo :

For more information, refer to the catalog.

0

BN-VG114U is the same battery pack that comes with this unit.

0

Approximate Recording Time (Using Battery)

Battery Pack

GZ-HM440/
GZ-HM450

Actual Recording Time Continuous Recording Time

GZ-HM650/
GZ-HM670/
GZ-HM690

GZ-HM440/
GZ-HM450

GZ-HM650/
GZ-HM670/
GZ-HM690

BN-VG114U
(Supplied)

BN-VG121U 1 h 40 m 1 h 35 m 3 h 5 m 2 h 55 m

BN-VG138U 3 h 2 h 55 m 5 h 30 m 5 h 20 m

The above are values when “LIGHT” is set to “OFF” and “MONITOR BRIGHTNESS” is set to “3” (standard).

0

The actual recording time may be shorter if zooming is used or if recording is stopped repeatedly.

0

(It is recommended to prepare battery packs ready for three times the expected recording time.)
When the battery life is reached, the recording time becomes shorter even if the battery pack is fully charged.

0

(Replace the battery pack with a new one.)

1 h 5 m 1 h 5 m 2 h 1 h 55 m

25

Recording

Taking Videos in Intelligent Auto Mode

You can record without worrying about the setting details by using the
Intelligent Auto mode. Settings such as exposure and focus will be adjusted
automatically to suit the shooting conditions.

0

In case of specific shooting scenes such as night view (B), person (A)
etc., its icon is displayed on the screen.

Before recording an important scene, it is recommended to conduct a trial

0

recording.

Open the lens cover.

1

.

Open the LCD monitor and select the video mode.

2

.

The video mode icon appears.

0

Check if the recording mode is Intelligent Auto.

3

Indications During Video Recording

.

Display Icon Description

Time Displays the current time.

Touch Priority AE/AFDisplays the setting of “TOUCH PRIORITY AE/AF”

Video Quality Displays the icon of the “VIDEO QUALITY” setting

Image Stabilizer Sets whether to reduce camera shake.

Scene Counter
(Recorded Time)

Remaining
Recording Time

Recording Mode Press the i.AUTO button to switch the recording

“Clock Setting” (A p. 20)

. By default, it is set to “FACE TRACKING”.
“Capturing Subjects Clearly (TOUCH PRIORITY
AE/AF)” (A p. 40)

selected in the recording menu.
“VIDEO QUALITY” (A p. 80)

“Reducing Camera Shake” (A p. 43)

Displays the elapsed time of the video that is
currently being recorded.

Displays the remaining time for video recording.

mode between P (Intelligent Auto) and H
(Manual).

.

0

If the mode is H Manual, press the i.AUTO button to switch.
The mode changes between Intelligent Auto and Manual with every
press.

Start recording.

4

.

Press again to stop.

0

Some displays disappear after approximately 3 seconds.

0

Use the n button to change the displays.

“Operation Buttons for Video Recording” (A p. 27)

Battery Indicator Displays the approximate remaining battery

power.
Details of the battery power can be displayed by
pressing the INFO button.
“Remaining Recording Time/Battery Power”
(A p. 48)

Recording Media Displays the icon of the media where videos are

recorded to.
The recording media can be changed.
“REC MEDIA FOR VIDEO (GZ-HM450/GZ­HM650/GZ-HM670/GZ-HM690)” (A p. 93)
“REC VIDEO TO SLOTS (GZ-HM440)”
(A p. 94)

Scenes of Intelligent Auto

o

Display Icon

E

A

D

Captures one’s skin beautifully.

Allows people to be captured naturally.

Focuses at a far distance and captures a sharp

Description

image with vivid colors.

I

B

Records with minimal noise in the overall image.

Allows night scenes to be captured accurately with
minimal noise in the overall image.

26

J

G

H

F

C

Prevents colors from fading even when recording
in a bright environment.

Records while focusing on a near object.

Reproduces the green color of trees vividly.

Reproduces the colors of sunset naturally.

Adjusts settings so that the subject does not
appear too dark due to backlight.

K

L

Allows people to be captured naturally with minimal
noise in the overall image.

Records while focusing on a near object even in a
dark environment.

Memo :

Scenes can be detected according to the shooting conditions and

0

automatically adjusted in Intelligent Auto mode.
Some functions may not work properly depending on the shooting

0

conditions.

Operation Buttons for Video Recording

.

Operation Button Description

T/W Zoom Allows the same functions as the zoom lever to be

Playback Mode

L

performed.
Camera shake that often occurs when using the
zoom lever can be minimized.
“Zooming” (A p. 28)

Switches to the playback mode.

Recording

Do not expose the lens to direct sunlight.

0

Do not use this unit in the rain, snow, or places with high humidity like the

0

bathroom.
Do not use this unit in places subject to excessive humidity or dust, as well

0

as places exposed to steam or smoke directly.
Do not remove the battery pack, AC adapter, or SD card when the access

0

lamp is lighted. The recorded data may become unreadable.

“ACCESS (Access) Lamp” (A p. 103)

This unit is a microcomputer-controlled device. Electrostatic discharge,

0

external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, turn off the power, then remove
the AC adapter and battery pack. This unit will be reset.

Make a backup of important recorded data.

0

It is recommended to copy your important recorded data to a DVD or other
recording media for storage.
JVC will not be responsible for any lost data.

Memo :

Check the remaining recording time in the media before you start shooting.

0

If there is not enough space, move (copy) the data to a computer or disc.
When there are many files in the media, it may take time for them to be

0

displayed on the playback screen. Wait for a while as the access lamp
appears blinking, which indicates normal operation.

Do not forget to make copies after recording!

0

Recording stops automatically as it cannot be performed for 12 or more

0

consecutive hours according to specifications.
(It may take some time to resume recording.)

For long recordings, the file is split into two or more files if the size exceeds

0

4 GB.
You can connect this unit to the AC adapter to record for long hours

0

indoors.

Recording Start

g

Record-Standby

a

MENU Displays the various menus of video recording.

Display Button n

Functions as the START/STOP button.

“Operating the Menu” (A p. 74)

Some displays disappear after approximately 3
seconds.

Use the n button to change the displays as shown
below.

0

Tap n button
Displays appear for approximately 3 seconds
with every tap.

0

Tap and hold n button
Displays are fixed such that they do not
disappear. After setting, the display button

changes from n to m.
Tap m to release the displays.

Useful Settings for Recording

When “QUICK RESTART” is set to “ON”, this unit turns on immediately if

0

you open the LCD monitor within 5 minutes after the power is turned off
by closing the monitor.

“QUICK RESTART” (A p. 96)

When “AUTO POWER OFF” is set to “ON”, this unit turns itself off

0

automatically to conserve power when it is not operated for 5 minutes.
(only when using the battery pack)

“AUTO POWER OFF” (A p. 95)

When “TOUCH PRIORITY AE/AF” is set to “FACE TRACKING”, this unit

0

detects faces and automatically adjusts its brightness and focus to record
the faces more clearly.

“Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 40)

If the remaining space on the built-in memory runs out while “SEAMLESS

0

RECORDING” is set to “ON”, recording continues after switching to the
SD card.

“SEAMLESS RECORDING” (A p. 81)

Caution :

27

Recording

Zooming

The angle of view can be adjusted using zoom.

Use the W end (wide angle end) to shoot a wider field of view.

0

Use the T end (telephoto end) to magnify the subject for shooting.

0

.

Memo :

When digital zoom is used, the image becomes grainy as it is digitally

0

enlarged.
The zoom ratio range can be changed.

0

“ZOOM” (A p. 80)

Capturing Still Images During Video Recording

Still images can be captured by pressing the SNAPSHOT button while in the
video mode (standby or recording).

.

“PHOTO” lights up on the screen when a still image is being captured.

0

Taking Still Images in Intelligent Auto Mode

You can record without worrying about the setting details by using the
Intelligent Auto mode.

Open the lens cover.

1

.

Open the LCD monitor and select the still image mode.

2

.

The still image mode icon appears.

0

Check if the recording mode is Intelligent Auto.

3

.

The still images captured during video recording are saved to the

0

destination set in “REC MEDIA FOR IMAGE” or “REC STILLS TO SLOTS”
.

Memo :

The size of the still image that is captured in the video mode is 1920 x

0

1080.
Operation is invalid under the following conditions:

0

- when menu is being displayed

- when file information or remaining battery power is being displayed

- when “FACE SUB-WINDOW” is set

- when “ANIMATION EFFECT” is set

“Recording while Displaying a Magnified View of a Selected Face (FACE
SUB-WINDOW)” (A p. 42)
“Creating Animation Effects (ANIMATION EFFECT)” (A p. 35)

Still images cannot be captured during video recording when cables are

0

connected to the HDMI (with output other than 1080i) or AV connector.

.

0

If the mode is H Manual, press the i.AUTO button to switch.
The mode changes between Intelligent Auto and Manual with every
press.

Set the focus on the subject.

4

.

When focused, the focus icon lights up in green.

0

Take a still image.

5

.

PHOTO lights up when a still image is being captured.

0

Some displays disappear after approximately 3 seconds.

0

Use the n button to change the displays.

“Operation Buttons for Still Image Recording” (A p. 29)

28

Recording

Indications During Still Image Recording

.

Display Icon Description

Time Displays the current time.

Touch Priority AE/AFDisplays the setting of “TOUCH PRIORITY AE/AF”

Image Size Displays the icon of the image size.

Shutter Speed Displays the shutter speed.

Focus Lights up in green when focused.

Recording in
Progress

Remaining
Number of Shots

Scene of
Intelligent Auto

Recording Mode Press the i.AUTO button to switch the recording

“Clock Setting” (A p. 20)

. By default, it is set to “FACE TRACKING”.
“Capturing Subjects Clearly (TOUCH PRIORITY
AE/AF)” (A p. 40)

The size of still images can be changed.

0

“IMAGE SIZE” (A p. 85)

Appears when a still image is being captured.

Displays the remaining number of shots for still
image recording.

Displays the selected scene of Intelligent Auto.
“Scenes of Intelligent Auto” (A p. 26)

mode between P (Intelligent Auto) and H
(Manual).

Operation Buttons for Still Image Recording

.

Operation Button Description

T/W Zoom Allows the same functions as the zoom lever to be

Playback Mode

L

Snapshot

Q

Menu Displays the various menus of still image

Display Button n

performed.
Camera shake that often occurs when using the
zoom lever can be minimized.
“Zooming” (A p. 30)

Switches to the playback mode.

Functions as the SNAPSHOT button. However,
focus cannot be set by pressing halfway.

recording.
“Operating the Menu” (A p. 74)

Some displays disappear after approximately 3
seconds.

Use the n button to change the displays as shown
below.

0

Tap n button
Displays appear for approximately 3 seconds
with every tap.

0

Tap and hold n button
Displays are fixed such that they do not
disappear. After setting, the display button

changes from n to m.
Tap m to release the displays.

Battery Indicator Displays the approximate remaining battery

power.
Details of the battery power can be displayed by
pressing the INFO button.
“Remaining Recording Time/Battery Power”
(A p. 48)

Recording Media Displays the icon of the media where still images

are recorded to.
The recording media can be changed.
“REC MEDIA FOR IMAGE (GZ-HM450/GZ­HM650/GZ-HM670/GZ-HM690)” (A p. 93)
“REC STILLS TO SLOTS (GZ-HM440)”
(A p. 94)

Useful Settings for Recording

When “AUTO POWER OFF” is set to “ON”, this unit turns itself off

0

automatically to conserve power when it is not operated for 5 minutes.
(only when using the battery pack)

“AUTO POWER OFF” (A p. 95)

When “TOUCH PRIORITY AE/AF” is set to “FACE TRACKING”, this unit

0

detects faces and automatically adjusts its brightness and focus to record
the faces more clearly.

“Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 40)

To perform recording in a dark location, do so after setting “LIGHT”.

0

“LIGHT (GZ-HM650/GZ-HM670/GZHM690)” (A p. 84)

Caution :

Do not expose the lens to direct sunlight.

0

Do not use this unit in the rain, snow, or places with high humidity like the

0

bathroom.
Do not use this unit in places subject to excessive humidity or dust, as well

0

as places exposed to steam or smoke directly.
Do not remove the battery pack, AC adapter, or SD card when the access

0

lamp is lighted. The recorded data may become unreadable.
This unit is a microcomputer-controlled device. Electrostatic discharge,

0

external noise and interference (from a TV, a radio, etc.) might prevent it
from functioning properly. In such a case, turn off the power, then remove
the AC adapter and battery pack. This unit will be reset.

Memo :

Before recording an important scene, it is recommended to conduct a trial

0

recording.
The digital image stabilizer does not work when recording still images.

0

29

Recording

Zooming

The angle of view can be adjusted using zoom.

Use the W end (wide angle end) to shoot a wider field of view.

0

Use the T end (telephoto end) to magnify the subject for shooting.

0

.

The following zoom options are available:

0

- Optical Zoom (1 – 40x)

Memo :

Only optical zoom is available in the still image recording mode.

0

Manual Recording

You can adjust settings, such as brightness, by using the manual mode.
Manual recording can be set for both video and still image modes.

Open the lens cover.

1

.

Open the LCD monitor.

2

.

Open the LCD monitor and select the video or still image mode.

3

.

The video or still image mode icon appears.

0

Select the Manual recording mode.

4

.

If the mode is Intelligent Auto, press the i.AUTO button to switch.

0

The mode changes between Intelligent Auto and Manual with every
press.

Start recording.

5

.

Press again to stop.

0

Memo :

The manual settings are displayed only in the manual mode.

0

30