JVC GZ-E10, GZE10BUS, GZE10RUS, GZ-E10AUS User Manual

Basic User Guide

.

Basic User Guide

(this manual)

AV Cable

USB Cable

(Type A - Mini Type B)

Battery Pack
BN-VG107U

AC Adapter

AC-V11U

Verifying the Accessories

HD MEMORY CAMERA

GZ-E10 A

LYT2392-001A-M

FRSPEN

Detailed User Guide

.

For more details on operating this
product, please refer to the “Detailed
User Guide” at the following website.

http://manual3.jvckenwood.com/

o

index.html/

Dear Customers

Thank you for purchasing this JVC product.
Before use, please read the Safety Precautions
and Cautions on p. 2 and p. 18 to ensure
safe use of this product.

Mobile User Guide

.

When you are outside, refer
to the “Mobile User Guide”.

http://manual3.jvckenwood.com/

o

mobile/en/

For Future Reference:

Enter the Model No. (located on the bottom of the camera)
and Serial No.
(located on the battery pack mount of the camera) below.

Model No.
Serial No.

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.

NOTES:

•

The rating plate and safety caution are on the

bottom and/or the back of the main unit.

•

The serial number plate is on the battery pack

mount.

•

The rating information and safety caution of the

AC adapter are on its upper and lower sides.

Caution on Replaceable lithium battery

The battery used in this device may present a fire
or chemical burn hazard if mistreated.
Do not recharge, disassemble, heat above 100°C
(212°F) or incinerate.
Replace battery with Panasonic, Sanyo, Sony or
Maxell CR2025.
Danger of explosion or Risk of fire if the battery is
incorrectly replaced.

•

Dispose of used battery promptly.

•

Keep away from children.

•

Do not disassemble and do not dispose of in fire.

For USA-California Only

This product contains a CR Coin Cell Lithium
Battery which contains Perchlorate Material
– special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate

When the equipment is installed in a cabinet or on
a shelf, make sure that it has sufficient space on all
sides to allow for ventilation (10 cm (3-15/16") or
more on both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a
newspaper, or cloth etc. the heat may not be able
to get out.)
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
When discarding batteries, environmental
problems must be considered and the local rules or
laws governing the disposal of these batteries must
be followed strictly.
The apparatus shall not be exposed to dripping or
splashing.
Do not use this equipment in a bathroom or places
with water.
Also do not place any containers filled with water
or liquids (such as cosmetics or medicines, flower
vases, potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this
equipment, fire or electric shock may be caused.)

Do not point the lens directly into the sun. This
can cause eye injuries, as well as lead to the
malfunctioning of internal circuitry. There is also a
risk of fire or electric shock.

CAUTION!

The following notes concern possible physical
damage to this unit and to the user.
Carrying or holding this unit by the LCD monitor
can result in dropping the unit, or in a malfunction.
Do not use a tripod on unsteady or unlevel surfaces.
It could tip over, causing serious damage to the unit.

CAUTION!

Connecting cables (Audio/Video, etc.) to

this unit
and leaving it on top of the TV is not recommended,
as tripping on the cables will cause

this unit

to fall,

resulting in damage.

CAUTION:

WARNING:

The battery pack, the camcorder with battery
installed, and the remote control with battery
installed should not be exposed to excessive heat
such as direct sunlight, fire or the like.

The mains plug shall remain readily operable.

•

Remove the mains plug immediately if the
camcorder functions abnormally.

.

2

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifi ers) that produce heat.

9. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

10. Only use attachments/accessories specifi ed by
the manufacturer.

11. Use only with the cart,
stand, tripod, bracket,
or table specifi ed by
the manufacturer, or
sold with the apparatus.
When a cart is used,
use caution when
moving the cart/
apparatus combination
to avoid injury from tip-over.

12. Unplug this apparatus during lightning storms or
when unused for long periods of time.

13. Refer all servicing to qualifi ed service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

If this symbol is shown, it is only valid
in the European Union.

Remember that this unit is intended for
private consumer use only.

Any commercial use without proper permission
is prohibited. (Even if you record an event such
as a show, performance or exhibition for personal
enjoyment, it is strongly recommended that you
obtain permission beforehand.)

Trademarks

•

AVCHD and AVCHD logo are trademarks

of Panasonic Corporation and Sony Corporation.

•

HDMI is a trademark of HDMI

Licensing, LLC.

•

Manufactured under license from Dolby

Laboratories. Dolby and the double-D symbol

are trademarks of Dolby Laboratories.

•

Windows® is either registered trademark or
trademark of Microsoft Corporation in the
United States and/or other countries.

•

Macintosh is a registered trademark of Apple Inc.

•

iMovie and iPhoto are trademarks of Apple Inc.,
registered in the U.S. and other countries.

•

YouTube™ and the YouTube logo are
trademarks and/or registered trademarks of
Google Inc.

•

Intel, Intel Core, and Pentium are trademarks or
registered trademarks of Intel Corporation or its
subsidiaries in the United States and other countries.
Android

™ is a trademark of Google Inc.

•

Other product and company names included in
this instruction manual are trademarks and/or
registered trademarks of their respective holders.

•

Marks such as ™ and ® have been omitted in this
manual.

When using the AC adapter in areas other
than the USA

The provided AC adapter features automatic
voltage selection in the AC range from 110 V to 240 V.

USING HOUSEHOLD AC PLUG ADAPTER

In case of connecting the unit’s power cord to
an AC wall outlet other than American National
Standard C73 series type use an AC plug
adapter, called a “Siemens Plug”, as shown.
For this AC plug adapter, consult your nearest
JVC dealer.

Plug Adapter

Remove the AC adapter from the AC wall outlet

when not in use.

Do not leave dust or metal objects adhered to

the AC wall outlet or AC adapter (power/DC plug).

•

•

Be sure to use the supplied AC adapter.

Do not use the supplied AC adapter with other

devices.

•

•

•

.

3

Contents

Safety Precautions ................................. 2

Available Accessories For the Camera .. 4

Getting Started

Charging the Battery Pack ..................... 5

Inserting an SD Card .............................. 6

Changing Menu Settings ........................ 7

Clock Setting .......................................... 7

Recording

Video Recording .................................... 8

Playback

Playing Back/Deleting Files on this Unit

Playing Back on TV .............................. 10

Copying

Keep It High Definition (Windows) ....... 11

Install Everio MediaBrowser (Windows)

USB Menu Operations ......................... 13

File Backup (Windows) ........................ 14

View Your Video (Windows) ................. 14

AVCHD Disc Creation (Windows) ........ 15

Record to a DVD or VHS Recorder ...... 15

How to Upload a File (Video Clip) to

YouTube (Windows) ............................ 16

Working with iMovie ............................. 17

Simple File Backup with a Mac ............ 17

.... 9

Further Information

Troubleshooting/Cautions .................... 18

Recordable Time/Specifications .......... 20

..... 12

NOTE

For more information, please refer to the Detailed User Guide.

http://manual3.jvckenwood.com/index.html/

Make a backup of important recorded data

JVC will not be responsible for any lost data. It is recommended to copy your important
recorded data to a disc or other recording media for storage once every 3 months.

Available Accessories For the Camera

Product Name*

Battery Pack

BN-VG114U

0

BN-VG121U

0

Battery Charger

AA-VG1U

0

* To order any of these accessories please visit www.store.jvc.com or call

1-800-252-5722

Provides a longer recording time than the battery pack that

0

comes with this unit or it can also be used as a spare battery
pack.

Enables the battery pack to be charged without using this unit.

0

4

Description

Charging the Battery Pack

(Base)

To detach the battery pack

Charging finished:
Goes out

Charging in progress:
Blinks

Charging Lamp

Plug in the power.

To AC Outlet
(110 V to 240 V)

AC Adapter

Cover

Connect the DC
connector.

Mark

Align the top of the battery
with the mark on this unit,
and slide in until the battery
clicks into place.

The battery pack is not
charged at the time of
purchase.

Attach the battery pack.

.

CAUTION

Be sure to use JVC battery packs.

If you use any other battery packs besides JVC battery packs, safety and

0

performance cannot be guaranteed.
The charging time is when the unit is used at 25°C (77°F). If the battery pack is

0

charged outside the room temperature range of 10°C to 35°C (50°F to 95°F),
charging may take a longer time or it may not start. The recordable and playable
time may also be shortened under some usage conditions such as at low
temperature.
You can record or play back videos while the AC adapter is connected. (Battery

0

charging cannot be performed during recording or playback.)
Remove the battery when the unit is to be used for a long time. Performance
of the battery may drop if it is left attached to the unit.

Battery Pack Charging Time

BN-VG107U (Supplied) 1 h 50 m 1 h 5 m 40 m
BN-VG114U 2 h 30 m 2 h 10 m 1 h 15 m
BN-VG121U 3 h 30 m 3 h 15 m 1 h 55 m

The battery pack is not charged at the time of purchase.

0

Recording time may differ depending on the shooting environment and usage.

0

Continuous

Recording Time

Actual Recording

Time

5

Inserting an SD Card

Turn off the power of this unit before
inserting or removing a card.

(Base)

Label

Insert an SD card.

Open the cover.Close the LCD monitor.

When the LCD monitor is closed, the unit turns off.

(Base)

Insert a commercially available SD card before recording.

.

To remove the card

o

Push the card inward once, then pull it out straight.

.

NOTE

Operations are confirmed on the following SD cards.

Manufacturer Panasonic, TOSHIBA, SanDisk

Class 4 or higher compatible SD card (2 GB)/
Class 4 or higher compatible SDHC card (4 GB to 32 GB)/
Class 4 or higher compatible SDXC card (48 GB to 64 GB)
(When recording with video quality “UXP”, Class 6 or higher
is recommended.)

Video A

Using SD cards (including SDHC/SDXC cards) other than those specified

0

above may result in recording failure or data loss.
To protect the data, do not touch the terminals of the SD card.

0

When using an SDXC card, check its compatibility with the OS of your computer

0

by referring to the Detailed User Guide.

6

Changing Menu Settings

GAIN UP

NOYES

SET DATE/TIME!

2012JAN 1 10 00

TIME

CLOCK SETTING

DATE

GMT

CLOCK/AREA SETTING

Select an item from the menu list on the
menu screen.

To select/move cursor towards up/
left or down/right, press the button
UP/< or DOWN/>.

.

Clock Setting

To select/move cursor towards up/left or
down/right, press the button UP/< or
DOWN/>.

Open the LCD monitor.

1

.

The unit turns on. When the LCD

0

monitor is closed, the unit turns off.

Select “YES” and press OK when

2

“SET DATE/TIME!” is displayed.

Press MENU on the unit to display

1

the menu.

.

Press UP/< or DOWN/> on the unit

2

to move the cursor up/down.

Press OK to select.

3

Set the date and time.

3

.

Press UP/< or DOWN/> to adjust the

0

setting value and press OK to confirm
it. The cursor moves to the next item.
Repeat this step to input the year,

0

month, day, hour, and minute.

Press UP/< or DOWN/> to select
the region where you live and press

4

OK.

The city name and time difference are

0

displayed.

.

.

To return to the previous screen

o

Press MENU.

7

Video Recording

(Telephoto)(Wide angle)

Zooming

Press again to stop.

Start recording.

The mode changes between Intelligent
Auto and Manual with every press.

If the mode is H Manual, press the S
button to switch.

Check if the recording mode is P Intelligent Auto.

Open the
lens cover.

0:00:00 [000:22]

Battery Indicator

Recording Media

Recording in Progress

Record-Standby

Remaining Recording Time

Video Quality

Scene Counter

Image Stabilizer

You can record without worrying about the setting details by using the Intelligent Auto
mode. Settings such as exposure and focus will be adjusted automatically to suit the
shooting conditions.
* In case of specific shooting scenes such as person etc., its icon is displayed on the

screen.

Before recording an important scene, it is recommended to conduct a trial recording.

.

Indications during video recording

o

.

NOTE

The estimated recording time of the supplied battery pack is approximately 40

0

minutes.
Do not remove the battery pack, AC adapter, or SD card when the access lamp

0

is lighted. The recorded data may become unreadable.
This unit turns itself off automatically to conserve power when it is not operated

0

for 5 minutes. (only when using the battery pack)
The angle of view may change when the image stabilizer is turned on or off.

0

8

Playing Back/Deleting Files on this Unit

2012

Turn up the
volume

Turn down the

volume

Volume adjustment

To select/move cursor towards
up/left or down/right, press the
button UP/< or DOWN/>.

Select the desired video and press
[d/e].

Select the playback mode.

Select and play back the recorded videos from an index screen (thumbnail display).

.

0

Press L again to return to the recording mode.

Press UP/< or DOWN/> to select files

To delete selected files from

o

the index screen

Press MENU, select “DELETE” and

A

press OK.
Select “FILE SELECT” and press OK.

B

C

and press OK.

0

A

appears.

Press MENU, select “EXECUTE” and

D

press OK to confirm deletion.
After deleting is complete, press OK.

E

9

Playing Back on TV

HDMI Connector
Input

TV

HDMI Cable
(Optional)

To HDMI Mini

Connector

Red

White

Ye l l o w

TV

Audio Input (R)

Audio Input (L)

Video Input

Video Input

AV Cable (Provided)

To AV Connector

Preparation:

Turn off both camera and TV.

0

To connect using the HDMI mini connector

When connecting to a 1080p compatible TV, set “HDMI OUTPUT” to “AUTO”.

.

NOTE

Use a High Speed HDMI mini cable.

0

To connect using the AV connector

Change the settings in “VIDEO OUTPUT” according to the connection.

.

Playback Operation

After the connection with TV is completed

A

Turn on the camera and the TV.

This unit powers on automatically when the AC adapter is connected.

0

B

Select the TV input switch.

C

Start playback on the camera.

To select/move cursor towards up/left or down/right, press the button UP/< or DOWN/>.

0

10

Keep It High Definition (Windows)

Back up to a computer:

o

The provided JVC software also makes it easy to copy your videos to a computer.

For customers with a Blu-ray Player:

o

The provided JVC software lets you create high definition AVCHD discs using standard blank
DVD-R media, and your Windows PC with DVD Burner.
An AVCHD disc is a great choice because it contains the original HD video, which can be
stored on inexpensive blank DVD-R media.
These discs can be played back in virtually any recent Blu-ray player that has the AVCHD logo.

Upload to YouTube

YouTube is a great way to share your videos, in either HD or SD quality. JVC makes it easy.

Copying Files

You can create discs or copy the files on this unit by connecting it to various devices.

Recordable and playable

:

I

Playable only

:

F

Not applicable

:

—

Standard

Quality

HD Quality

Media Selection

Blu-ray Recorder

.

DVD Recorder

.

Device

.

Computer

.

VCR

.

(VHS

Tape)

.

(DVD
Disc)

—

I

—

I

I

—

— — — —

I *2 I *3 I *4

.

(DVD

Disc)

F *1

F *1

.

(Blu-ray

Disc)

I *1

—

.

(Device’s

internal

HDD)

I

I

I

Page

See Detailed User
Guide and manual

of recorder.

See Detailed User
Guide and manual

of recorder.

See Detailed User
Guide and manual

of recorder.

p. 14

*1 Only on AVCHD compatible devices.
*2 To create DVD-Video discs, it is necessary to update the provided software. For

details, refer to the Pixela homepage.

http://www.pixela.co.jp/oem/jvc/mediabrowser/e/
*3 For details on how to create a disc using a computer, refer to the Detailed User Guide.
*4 Blu-ray discs cannot be created using the provided software. To create Blu-ray discs,

use a commercially available software.

Each of these solutions is explained in detail in the following sections.

11

Install Everio MediaBrowser (Windows)

To USB Connector

To AC Outlet
(110 V to 240 V)

AC Adapter

USB Cable
(Provided)

To DC

Connector

To USB
Connector

PLAYBACK ON PC

CONNECT TO PC

Everio MediaBrowser is included with your
camera. It lets you archive and organize
your videos. It also lets you create discs and
upload video to YouTube, and other
popular web sites.

Preparation:

Close the LCD monitor to turn off the

0

camera. Disconnect the power supply.

Open the LCD monitor to connect

1

to the PC with the USB cable.

.

Reconnect the power supply to turn on

0

the camera.

On the camera:

o

To select/move cursor towards up/left or

0

down/right, press the button UP/< or
DOWN/>.

Select “CONNECT TO PC” and

2

press OK.

On the PC:

o

Perform the following steps on the

4

computer.

Click “Run INSTALL.EXE” in the

A

auto play dialog box.
Click “Continue” on the user

B

account control screen.

“Software Setup” appears after a

0

while.
If it doesn’t appear, double-click

0

“JVCCAM_APP” in “My
Computer” (or “Computer”),
then double-click the
“install.exe”.

Click “Everio MediaBrowser 4”.

5

.

Follow the on-screen instructions.

0

Click “Finish”.

6

Click “Quit”.

7

Select “PLAYBACK ON PC” and

3

press OK.

.

12

.

Installation ends and icons are created

0

on the desktop.

Everio MediaBrowser uses a calendar

CONNECT TO PC

TYPE TO CONNECT

SELECT DEVICE

SELECT DEVICE

PLAYBACK ON PC

CONNECT TO PC

0

based interface that makes it easy to find
any video you have recorded by selecting
the appropriate date.

USB Menu Operations

.

By connecting a USB cable between this
unit and your computer, you can perform
operations such as file backups to PC/disc
or file uploads to file-sharing site using your
computer.

Preparation:

Install the Everio MediaBrowser software

0

onto the PC.
Close the LCD monitor to turn off the

0

camera. Disconnect the power supply.

Open the LCD monitor to connect

1

to the PC with the USB cable.

Reconnect the power supply to turn on

0

the camera.

The “SELECT DEVICE” menu
appears.

2

Select “CONNECT TO PC” and
press OK.

.

Select “CONNECT TO OTHER” if the

0

camera is connected to a device other
than a computer.
To select/move cursor towards up/left

0

or down/right, press the button UP/< or
DOWN/>.

The “CONNECT TO PC” menu
appears.

3

Select an option that best suits your
needs and press OK.

.

To select/move cursor towards up/left

0

or down/right, press the button UP/< or
DOWN/>.

Option Usage

PLAYBACK
ON PC

CREATE
DISC

DIRECT
DISC

UPLOAD

BACK UP0To back up recordings on

For detailed operations on the above
options, refer to the other sections in this
guide or the “Detailed User Guide”.

To play back your

0

recordings on the PC.
To back up your

0

recordings on the PC
without using the provided
software.

To save your recordings

0

on a disc.
To save all unsaved

0

recordings on a disc.
To upload videos to file-

0

sharing sites.

the PC.

13

File Backup (Windows)

To AC Outlet
(110 V to 240 V)

AC Adapter

To USB Connector

USB Cable
(Provided)

To DC ConnectorTo USB

Connector

CONNECT TO PC

BACK UP

2

1

Click

Click

Click

Saving destination (PC)

Preparation:

Install the Everio MediaBrowser software

0

onto the PC.
Make sure that enough space is left in the

0

PC’s HDD.
Close the LCD monitor to turn off the

0

camera. Disconnect the power supply.

Open the LCD monitor to connect to

1

the PC with the USB cable.

.

Reconnect the power supply to turn on

0

the camera.

On the camera:

o

To select/move cursor towards up/left or down/

0

right, press the button UP/< or DOWN/>.

Select “CONNECT TO PC” and press

2

OK.

Select “BACK UP” and press OK.

3

.

Everio MediaBrowser starts on the PC.

0

On the PC:

o

Select the volume.

4

.

Start backup.

5

.

NOTE

File backup is only supported by

0

the provided software.

View Your Video (Windows)

To view video that is still on your camera, click on Device>Camcorder

0

in the left side panel of Everio MediaBrowser.
To view video that has already been archived to the computer, click

0

on Library>Calendar and then choose the date the video was
recorded.

NOTE

Choose Settings/Preferences to see the folder where

0

MediaBrowser stores your videos. You can also play back
your videos from this folder in most popular media players.

14

AVCHD Disc Creation (Windows)

Audio Input (R)

Audio Input (L)

Video Input

Video Input

Red

White

Ye l l o w

To DC Connector

To AC Outlet
(110 V to 240 V)

AC Adapter

AV Cable (Provided)

To AV Connector

DVD/VHS Recorder

Everio MediaBrowser makes it possible

0

to create AVCHD discs to archive your
recordings in their original high definition
quality.
You can use any standard DVD-R, DVD-

0

RW, DVD+R or DVD+RW disc.
Recordings made in the XP, SP, or EP

0

mode are recorded with no loss in quality.
Recordings made in the UXP mode are
first converted to the XP mode, and then
recorded.
A standard 4.7 GB disc will hold

0

approximately 35 minutes of video in the
highest quality setting.
AVCHD discs can be played back in any

0

Blu-ray player that is AVCHD compatible.
Just look for the AVCHD logo.

.

Preparation:

Install the software on your PC.

0

Click on the “Create Disc” button.

1

.

Select the video clips you wish to

2

include.

Choose a menu background and

3

enter a menu title.

Create the AVCHD disc.

4

NOTE

In order to include UXP recordings on your AVCHD discs, be sure to go to

0

Settings>Disc Creation Settings, and under “AVC Disc Creation in UXP mode”,
choose “Re-encode to XP mode quality level”.

Record to a DVD or VHS Recorder

It is also possible to record to a DVD or VHS recorder. Please note that this will create a
standard definition recording with standard definition picture quality.

.

Preparation:

Use the supplied AV cable. The yellow connection is video. The white connection is left

0

channel audio. The red connection is right channel audio. Connect this cable to the AV
input on your DVD or VHS recorder.
Follow your DVD/VHS recorder instructions to copy (dub) the video.

0

15

How to Upload a File (Video Clip) to

Customer Support Information

Use of this software is authorized according to the terms of the software license.

Pixela

(for inquires regarding the provided software)

Region Language Phone #

USA and Canada English [phone] (toll-free)

Europe (UK, Germany, France,

and Spain)

English/German/French/Spanish [phone] (toll-free)

Other Countries in Europe English/German/French/Spanish [phone]

Asia (Philippines) English [phone]

nihCanihC ese 10800-163-0014 (toll-free)

Homepage: http://www.pixela.co.jp/oem/jvc/mediabrowser/e/
Please check our website for latest information and downloading.

YouTube (Windows)

Uploading Videos

You can upload your videos to YouTube
using the provided software “Everio
MediaBrowser”.

Preparation:

Install the software on your PC.

0

Click on the “YouTube” button.

1

.

Select the video clips you wish to

2

include.

Enter account and upload

3

information.

Start upload to YouTube.

4

For details on how to upload to YouTube,
refer to “MediaBrowser Help”.

.

Trouble with Uploading Videos

o

Check if you have created an account

0

with YouTube.

Trouble with Using the Provided

o

Software “Everio MediaBrowser”

Consult the customer service center

0

below.

.

16

Working with iMovie

USB cable
(Provided)

To USB
port

To USB
Connector

USB cable
(Provided)

To USB
port

To USB
Connector

PLAYBACK ON PC

CONNECT TO PC

You may use the software supplied with

0

the Mac Computer to view and edit files
from the Camera.
Connect the Camera to the Mac

0

Computer using a USB Cable.

iMovie

o

You can import files from this unit to a computer
using Apple’s iMovie ’08, ’09 or ’11.
To verify the system requirements, select “About
This Mac” from the Apple menu. You can determine
the operating system version, processor and
amount of memory.

NOTE

For the latest information on iMovie,

.

NOTE

Files must be transferred to the

0

Mac Computer for editing.

0

refer to the Apple website.
For details on how to use iMovie,

0

refer to the help file of the software.
There is no guarantee that the

0

operations will work with all
computer environments.

Simple File Backup with a Mac

Preparation:

Make sure that enough space is left in the

0

Mac’s HDD.
Close the LCD monitor to turn off the

0

camera. Disconnect the power supply.

Open the LCD monitor to connect

1

to the computer with the USB cable.

.

Reconnect the power supply to turn on

0

the camera.

Select “CONNECT TO PC” and

2

press OK.

To select/move cursor towards up/left

0

or down/right, press the button UP/< or
DOWN/>.

Select “PLAYBACK ON PC” and

3

press OK.

.

To select/move cursor towards up/left

0

or down/right, press the button UP/< or
DOWN/>.

Copy and paste the files to the Mac

4

Computer for backup.

17

Troubleshooting/Cautions

Battery Pack

Troubleshooting

The supplied battery pack is a
lithium-ion battery. Before using
the supplied battery pack or an
optional battery pack, be sure
to read the following cautions:

Terminals

•

To avoid hazards

...

do not burn.
do not short-circuit the terminals. Keep it away

from metallic objects when not in use. When
transporting, carry the battery in a plastic bag.

do not modify or disassemble.
do not expose the battery to temperatures

exceeding 60°C (140°F), as this may cause the
battery to overheat, explode or catch fire.
use only specified chargers.

...

...
...

...

...
...

...

...

...

...

•

To prevent damage and prolong service life

do not subject to unnecessary shock.
charge within the temperature range of 10°C
to 35°C (50°F to 95°F). Cooler temperatures
require longer charging time, or in some cases
stop charging at all.
Warmer temperatures prevent complete
charging, or in some cases stop charging at all.
store in a cool, dry place. Extended exposure
to high temperatures will increase natural
discharge and shorten service life.

keep a 30% battery level (X) if the battery pack
is not to be used for a long period of time.
In addition, fully charge and then fully discharge
the battery pack every 6 months, then continue
to store it at a 30% battery level (

X).

remove from charger or powered unit when not
in use, as some machines use current even
when switched off.
do not drop or subject to strong impact.

While the LCD monitor screen has more than

99.99% effective pixels, 0.01% of the pixels
may be bright spots (red, blue, green) or dark
spots. This is not a malfunction. The spots will
not be recorded.

ATTENTION:

The product you have purchased
is powered by a rechargeable
battery that is recyclable.
Please call 1-800-8-BATTERY for
information on how to recycle this
battery.
(USA and Canada only)

Recording Medium

•

Be sure to follow the guidelines below
to prevent corruption or damage to your
recorded data.

•

Do not bend or drop the recording medium,

or subject it to strong pressure, jolts or
vibrations.

•

Do not splash the recording medium with water.

•

Do not use, replace, or store the recording

medium in locations that are exposed to
strong static electricity or electrical noise.

•

Do not turn off the camcorder power or

remove the battery or AC adapter during
shooting, playback, or when otherwise
accessing the recording medium.

•

Do not bring the recording medium near

objects that have a strong magnetic field or
that emit strong electromagnetic waves.

•

Do not store the recording medium in locations

with high temperature or high humidity.

•

Do not touch the metal parts.

•

When formatting or erasing data using
the camcorder, only the file administration
information is changed. The data is not
completely erased from the recording medium.
If you want to completely erase all of the data,
we recommend either using commercially
available software that is specially designed
for that purpose, or by physically destroying
the camcorder with a hammer etc.

LCD Monitor

•

To prevent damage to the LCD monitor,
DO NOT

... push it strongly or apply any shocks.
... place the camcorder with LCD monitor on the

bottom.

•

To prolong service life

... avoid rubbing it with coarse cloth.

If the above do not solve the problem, consult
your nearest JVC dealer or JVC service center.

Remove the AC adapter and battery pack from
this unit, reattach them, open the LCD monitor
and this unit powers on automatically.

Turn off the power. (Close the LCD monitor.)

In such a case, reset the unit.

This unit is a microcomputer-controlled device.
Electrostatic discharge, external noise and
interference (from a TV, a radio, etc.) might
prevent it from functioning properly.

If you have difficulties operating the unit, refer
to the detailed descriptions in the “Detailed
User Guide”.

Refer to the “Troubleshooting” section in the
“Detailed User Guide”.

If you encounter problems with this unit, check the
following before requesting service.

http://manual3.jvckenwood.com/index.html/

1.

A
B

2.

3.

.

18