JVC GR-AXM17 User Manual

COMPACT VHS CAMCORDER

GR-AXM17

For Customer Use:

Enter below the Model No. and Serial No. which is located on the bottom of the camcorder. Retain this information for future reference.

Model No. Serial No.

CONTENTS

GETTING STARTED 5 ~ 9

RECORDING/PLAYBACK 9 ~ 10

BASIC FEATURES 10 ~ 12

MENU SETTINGS 12 ~ 15

REFERENCES 16 ~ 18

ENGLISH INSTRUCTIONS

AUTOMATIC DEMONSTRATION

Automatic Demonstration takes place when “DEMO MODE” is set to “ON” (factory-preset).

• Available when the Power Switch is set to “ ” or “ ”.

• To cancel Automatic Demonstration, set "DEMO MODE" to "OFF" ( pg. 15).

Dear Customer,

Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read “SAFETY PRECAUTIONS” ( pg. 3, 4) to ensure safe use of this product.

LYT1377-001B

PROVIDED ACCESSORIES

AC Adapter AP-V14U or

AP-V16U

PROVIDED ACCESSORIES

Battery Pack

BN-V10U

Shoulder Strap

A/V (Audio/Video)

Cable

OPTIONAL ACCESSORIES

• Battery Packs BN-V12U, BN-V20U, BNV400U

• Compact VHS ( ) Cassettes TC-40/ 30/20

• Active Carrying Bag CB-V75

• Cassette Adapter C-P8U

Some accessories are not available in some areas. Please consult your nearest JVC dealer for details on accessories and their availability.

Lens Cap

NOTE:

In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core ﬁlter. If a cable has only one core ﬁlter, the end that is closest to the ﬁlter should be connected to the camcorder.

SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

This product has a ﬂuorescent lamp that contains a small amount of mercury. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance:

<http://www.eiae.org>

• This camcorder is designed to be used with

CAUTIONS

NTSC-type color television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor/viewﬁnder playback are possible anywhere.

• Use the JVC BN-V10U/V12U/V20U/V400U battery packs and, to recharge them or to supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.)

NOTES:

• The rating plate (serial number plate) and safety caution are on the bottom and/or the back of the main unit.

• The rating information and safety caution of the AC Adapter are on its upper and lower sides.

ATTENTION

The product that you have purchased is powered by a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste ofﬁcials for details in your area for recycling options or proper disposal.

SAFETY PRECAUTIONS

Only cassettes marked can be used with this camcorder.

The EPA certiﬁed RBRC® Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery indicates JVC is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States. The RBRC® program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-8-BATTERY™ for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. JVC’s involvement in this program is part of our commitment to preserving our environment and conserving our natural resources.

When the equipment is installed in a cabinet or on a shelf, make sure that it has sufﬁcient space on all sides to allow for ventilation (10 cm (3-15/16") or more on both sides, on top and at the rear). Do not block the ventilation holes.

SAFETY PRECAUTIONS

(If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.) No naked ﬂame sources, such as lighted candles, should be placed on the apparatus. When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly. The apparatus shall not be exposed to dripping or splashing. Do not use this equipment in a bathroom or places with water. Also do not place any containers ﬁlled with water or liquids (such as cosmetics or medicines, ﬂower vases, potted plants, cups etc.) on top of this unit. (If water or liquid is allowed to enter this equipment, ﬁre or electric shock may be caused.)

IMPORTANT SAFETY INSTRUCTIONS

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install

in accordance with the manufacturer’s instructions.

8)Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

9)Only use attachments/accessories speciﬁed

by the manufacturer.

10)Use only with the car t, stand,

tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

11) Unplug this apparatus during lightning

storms or when unused for long periods of time.

12)Refer all servicing to qualiﬁed service

personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

CONTROLS, CONNECTORS AND INDICATORS

Refer to this diagram while reading the instructions.

Eyepiece

Connector Cover

6 7 5

During

shooting

Keep the lens cap attached to the camcorder

Cassette holder

)

Viewﬁnder

180

Speaker

LCD monitor

Microphone

LCD Monitor/Viewﬁnder Indications

During Recording During Playback

(

GETTING STARTED

Turn the gear to take up slack

Erase protection tab

[ _

]

> @

–

AAT

0R4 AM

;

A–T–I

–

– L

{

}

TVBOC

LUME

–

–– ––––

–

–:–

–

pg. 16 for “Warning Indications”

• MENU Wheel [–, +]...............................  pg. 8

• BRIGHT Wheel [–, +]..........................  pg. 14

• Speaker Volume Control [VOL.]..........  pg. 10

• TRACKING Wheel [–, +].....................  pg. 10

5- Second Recording Button

[5 SEC. REC]......................................  pg. 10

Power Zoom Lever [T/W] ......................  pg. 10

• Manual Focus Button [ FOCUS] ....  pg. 10

• Time Base Corrector Button [TBC].....  pg. 11

GETTING STARTED

Shoulder Strap Eyelets...........................  pg. 9

Audio Output Connector [A]..................  pg. 11

Video Output Connector [V]..................  pg. 11

Battery Release Switch

[BATTERY RELEASE]............................  pg. 7

DC IN Connector ....................................  pg. 7

• Recording Start/Stop Button ................  pg. 9

• REFRESH Button.................................  pg. 7

Lock Button.............................................  pg. 8

Power Switch [PLAY, OFF, , ]....  pg. 7, 8, 9

POWER/CHARGE Lamp........................  pg. 7

• Retake Forward Button [RETAKE F] ..  pg. 10

• Fast-Forward Button [F]........................  pg. 9

• Play/ Pause Button...............................  pg. 9

• Backlight Compensation Button .........  pg. 10

(

• Stop Button [STOP]..............................  pg. 9

• Eject [EJECT] Button ...........................  pg. 9

)

• Retake Rewind Button [RETAKE R] ...  pg. 10

• Quick Review Button [ R] .............  pg. 10

• Rewind Button [R] ................................  pg. 9

Close Button ...........................................  pg. 9

Diopter Adjustment Control ....................  pg. 8

Grip Strap ...............................................  pg. 8

Tripod Mounting Socket ..........................  pg. 9

Tape Remaining Time ...........................  pg. 14

Recording Mode Indicator ....................  pg. 13

Backlight Compensation Indicator ........  pg. 10

;

Tape Length Indicator ...........................  pg. 14

Zoom Indicator Bar ...............................  pg. 10

a Zoom Level Indicator b Approximate Zoom Ratio

Recording Indicator ................................  pg. 9

Digital Effect Indicator...........................  pg. 13

Program AE Indicator............................  pg. 13

Fade/Wipe-Standby Indicator ...............  pg. 13

[

Picture Stabilizer Indicator....................  pg. 14

• Interval Time/Recording Time Indicator  pg. 15

• 5 Sec. Rec Mode Indicator .................  pg. 10

]

Instant Title Display ..............................  pg. 14

Date/Time Display ................................  pg. 15

Bright Level Indicator............................  pg. 14

{

Focus Indicator .....................................  pg. 10

Exposure Control Level Counter ..........  pg. 13

}

White Balance Mode Indicator .............  pg. 14

Record-Standby Mode Indicator.............  pg. 9

: Cassette Indicator ......................  pg. 16

TBC Indicator .......................................  pg. 11

Tape Counter ........................................  pg. 15

Recording Mode Indicator (SP/EP) ......  pg. 14

Tape Running Indicator

3: Playback ¡: Fast-Forward/ Shuttle Search 1: Rewind/ Shuttle Search 8: Pause

Tracking Indicator .................................  pg. 10

VOLUME: Speaker Volume Indicator .........  pg. 10

GETTING STARTED

Hook on

Push in

Power Switch

BATTERY RELEASE Switch

Battery pack

To AC outlet

AC Adapter

Charging the Battery Pack

1) Hook the end of the battery pack to the

camcorder and push the battery in until it locks in place.

• If the battery pack is attached wrongly, a malfunction may occur.

2) Set the Power Switch pressing down the Lock Button the AC Adapter to the DC IN connector then plug the AC Adapter to the AC Outlet.

3) The CHARGE lamp charging.

4) When the CHARGE lamp and turns off, charging is ﬁnished. Unplug the AC Adapter from the AC outlet. Disconnect the AC Adapter from the camcorder.

blinks to indicate

To Detach The Battery Pack…

… slide BATTERY RELEASE 8 and pull out the battery pack.

Battery Pack Charging time

BN-V10U approx. 1 hr. 30 min. BN-V12U (optional) approx. 1 hr. 40 min. BN-V20U (optional) approx. 2 hrs. 40 min. BN-V400U (optional) approx. 5 hrs. 10 min.

Charging time is for a fully discharged battery pack.

To DC IN connector

to “OFF” while

. Connect

stops blinking

Using the Battery Pack

Perform step 1) of “Charging the Battery Pack”. Approximate recording time (unit: min.)

Battery Pack Viewﬁnder on LCD monitor on

BN-V10U 100 80

BN-V12U (optional)

BN-V20U (optional)

BN-V400U (optional)

105 85

170 140

400 330

Using AC Power

Connect the AC Adapter to the camcorder ( step 2) of “Charging the Battery Pack”).

• The provided AC Adapter features automatic voltage selection in the AC range from 110V to 240V.

ATTENTION:

Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can cause the camcorder to malfunction.

REFRESH:

Be sure to fully discharge a battery pack before recharging or storing it for a long period of time, otherwise the battery performance will be

reduced.

1) Perform steps 1) through 3) of “Charging the Battery Pack”.

2) Press REFRESH ! for over 4 seconds. The CHARGE lamp $ blinks faster to indicate discharging.

3) When discharging is ﬁnished, charging automatically starts and the CHARGE lamp $ blinks normally.

GETTING STARTED

STORE BATTERY:

Be sure to fully discharge a battery pack by performing the following steps before storing it for a long period af time, otherwise the battery performance will be reduced.

1) Attach the battery to the camcorder with no cassette

inserted.

2) Set the Power Switch

down the Lock Button

• During charging or discharging, the camcorder cannot be operated.

• Charging and discharging are not possible if the wrong type of battery is used.

GETTING STARTED

• When charging the battery pack for the ﬁrst time or after a long storage period, the CHARGE lamp light. Remove the battery pack from the camcorder, then try charging again.

• If a fully-charged battery’s operation time remains extremely short, the battery is wor n out. Please purchase a new one.

• Perform charging where the temperature is between 10°C and 35°C (50°F and 95°F). 20°C to 25°C (68°F to 77°F) is the ideal temperature range. If the environment is too cold, charging may be incomplete.

• Charging time varies according to the ambient temperature and the status of the battery pack.

• Since the AC Adapter processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas.

• Using the optional AA-V15 AC Power Adapter/Charger, you can charge the BN-V10U/V12U/V20U/V400U battery pack without the camcorder. However, it cannot be used as an AC adapter.

• To avoid interference with reception, do not use the AC Adapter near a radio.

• Recording time is reduced signiﬁcantly when Zoom or Record-Standby mode is engaged repeatedly or the LCD monitor is used repeatedly.

• Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.

to “ ” or “ ” while pressing

may not

Date/Time Settings

1) Set the Power Switch # to “ ” while pressing

down the Lock Button

2) Press the MENU Wheel Screen appears.

3) Rotate the MENU Wheel SYSTEM MENU” and press it.

4) Rotate the MENU Wheel TIME SET” and press it. The DATE/TIME SET Menu appears.

5) To set “YEAR”, “MONTH”, “DAY” or “TIME” (hour/ minute), rotate the MENU Wheel desired item, and press it. When the setting begins blinking, rotate the MENU Wheel the correct setting appears and then press it. The setting stops blinking.

6) When none of these settings (“YEAR”, “MONTH”, “DAY”, “TIME”) blinks, rotate the MENU Wheel to select “3RETURN” and press it, to go to Menu Screen.

7) Press the MENU Wheel to close the Menu Screen.

in. The TOP MENU

to select “3TO

to select “3DATE/

in to select “3EXIT”

to select the

until

• To display the date and time in the camcorder’s display and on a connected TV, see DATE/TIME DISP. ( pg. 15) in SYSTEM MENU 1.

• The date/time cannot be stored in memor y if the built-in clock battery runs out. Consult an authorised JVC dealer for replacement, or set the date/time as necessary before you start shooting.

THURN

DATE T I MPMESET

8J:

A 2 2

N 8 0

12-hour indication with AM or PM

Grip Adjustment

1) Separate the Velcro strip.

2) Pass your right hand through the loop and grasp the

grip.

3) Adjust so that your thumb and ﬁngers can easily operate the Recording Start/Stop Button Power Zoom Lever

. Refasten the Velcro strip.

and

Velcro strip

Viewﬁnder Adjustment

1) Set the Power Switch pressing down the Lock Button

2) Make sure the LCD monitor is closed and locked. Pull up the viewﬁnder and adjust it manually to get the best view.

3) Turn the Diopter Adjustment Control indications in the viewﬁnder are clearly focused.

to “ ” or “ ” while

until the

+ 16 hidden pages